Please specify disadvantage of RDM, and how to modify vmfs to RDM lun?

Similar Questions

• There is a black bar just above the tabs. Please help me what is and how can I remove it...

  Hello world
  I upgraded my Mozilla Firefox version 3.6, and after that, I see a black bar located above the tabs and below the other toolbars.
  Please help me how I can remove it, and that is it!
  Thank you...

  Problems with a black (blank) toolbar can be caused by a plugin or extension that is not compatible with Firefox 3.6 and no longer works correctly.

  A toolbar like the "ZoneAlarm Spy Blocker Plugin Stub for 32-bit Windows" and other toolbars such as "My Web Search" or "Ask.com" can cause this problem.

  You can see in view toolbars > toolbar.
  
  See http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins

• Equium A100-306 have bluetooth and how do I get the mic to work?

  Hi there, please forgive stupidity but I'm new in the world of technology. Have tried to activate bluetooth for accept my mobile, but nothing helps... begins to think he had a bad impression on the box! Please help, this model has and how to operate... 2nd question...

  I need an external microphone? In-House said we could work when calls however, no one can hear me and I tried to change the settings, to be honest have no idea what I'm doing? Help me please someone... Thank you Eva *.

  I can confirm that. The laptop does not support the BT module and does not support the internal mic. If you want to use the microphone, you should use an external one. You can connect it to the external microphone jack. All that s.

  But what exactly do you do? You want to transfer images from mobile phone to laptop?
  In this case, you can use a USB cable which has been specifically designed for mobile phones to connect to the laptop or desktop PC

• What is a 'hiberfile"and how to close it

  Some please explain what a "hiberfile" and how to close it?

  Hello

  What is hiberfil.sys and how to remove it?
  http://www.howtogeek.com/HOWTO/15140/what-is-Hiberfil.sys-and-how-do-i-delete-it/

  Hibernate mode (computer science)
  http://en.wikipedia.org/wiki/Hibernation _(computing)

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Help with my computer! All the deleted files, including recovery! What's past and how to fix it?

  Hello. So a few days ago I restarted my computer. Literally restarted my computer (turn off then turn onn) because my shortcuts do not work (the .exe would not launch files). I restarted my computer, and when I click on the shortcut, he said that there was no such destination. Soon I relised all my files are gone. I restarted my computer and you press F8 so that I can back to factory State, but the recovery has not worked and now im stuck at the facility because it looks like this: there is no for files recovery. Idk what happened but all my files and I installed software have disappeared. Someone can you please tell me what happened and how can I solve this problem?

  100% recovery does not work! Using the computer in safe mode doesn't work.

  My system doesn't have a backup of the files. The files just disappeared. All my files actually including the files for recovery. You say I should reinstall my windows using the CD/DVD. If this is the case, I have a problem because I don't have the CD/DVD for her. The paper in my computer box indicates that you must install it in the computer (deleted files). What can I do?

  Your system does not have backups of your files/folders for you.  It is your duty to implement only or not.  If you do not the installer / make backups of your data - so you lose if/when something happens.

  (The automatic backup of the system files needed) system restore is enabled by default - but can be disabled by the system administrator.

  The "recovery" you used is not a feature of Microsoft or setup - which was created by the computer manufacturer.  They decided that it would be more easy/better to put the backup of the system installation media in the same place the user puts all their stuff - on the physical hard disk in the machine.  It is destructive or not is determined by the computer manufacturer and they even included a choice (destructive or non-destructive recovery) _ at the time use you it.  Each of them has been/is different.

  You can contact the manufacturer of the computer and HOPE they always support of recovery for your computer and not you charge (or charge you a large part) to get the media said.

  Can read this - it might help:
  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320

• What I've done and how to undo what I've done?

  It was O-black-30 (this morning) and I was not paying attention to what I was doing. Somehow I clicked on something and now when I slide the time line, there is no action on the screen until the mouse button is released. I tried all combinations of key & mouse clicks except the right one. PLEASE, what I've done and how to undo what I've done? AE CS4
  

  Thank you

  You turned off Live updates.  It is the dark button at the top of the editing window in this picture:

  

• execution of DLLs. Error loading cbbxw.dll. the specified module could not be found. -what it means and how do I get rid of him?

  execution of DLLs. Error loading cbbxw.dll. the specified module could not be found. -what it means and how do I get rid of him?

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• where and how to get the new Firefox add - one of who is spying on us. Please mail to...

  Heard speak adds the new on Fire Fox. Where and how to get the new Firefox add - one of who is spying on us. Please mail to maheshubhayakar at rediffmail.com

  edited by email address - moderator

  It is helpful if you provide a link to the article you were reading.

• whenever I have started using Mozilla Firefox (version latetest), all I hear is a mermaid. This does not happen when you use other browsers. What is the cause? and how can I stop it please?

  every time I start using firefox all I can hear are sirens, why is this and how can I stop it please?

  This has happened

  Each time Firefox opened

  May 21, 2010

  go to the Cool Previews website and download the latest version. They were aware of the mermaid problem and this latest version corrects the problem. The siren will disappear after downloading and restarting of Fox

• Advantages disadvantages & RAID and how to assign Qosmio G30 speed

  Hello.

  I heard that the RAID configuration can increase or not the speed... If someone more expert can explain to me how it works?

  1.) first of all what is RAID (explain in words that an ignorant in the calculation as I can uderstand)

  (2.) what is the difference between raid 0 or raid 1 and how it affects the computer?

  (3.) what are the advantages/disadvantages to choose between this two settings?

  Hello

  I m not a guru RAID ;) but I used Qosmio G20 with and without a permit to RAID technology and I have not noticed the disadvantages of speed.

  I see that you are a beginner and so I will try to explain the RAID feature very easily ;)
  What is RAID? RAID (Redundant Array of Independent Disks) allows to save data.

  The RAID reflected the content of the first HARD drive to the second HARD drive. This means that all the files (depending on the RAID settings) that are stored on the HDD1 is also stored on HDD2. If the HDD1 will damage, you will be able to recover everything from the HDD2 unit.

  The two s of HARD drive can be used with mirror RAID-1 or RAID-0 stripping
  When you use RAID-1, data is stored twice (once on each of the hard disks) so if there are problems with one of the hard drives, the other HARD disk can be used to retrieve the data.
  But you can use only two hard drives as a single HARD drive. (2 disks hard = 1 HDD)

  When you use RAID 0 (stripping) met by the operating system size is two times more!
  Using RAID-0 configuration, all data on both disks will be lost, even if only one of the two disks fails!

  I think that the RAID is very useful because it safes the contents of HARD drive!
  Of course, if you use the mirroring option, you can only use the a HDD available!
  But you are on the site course ;)

• Checking file system on C: the Type of file is NTFS. The Volume is dirty. -What this means and how do I clean the Volume, please? My computer is Dell XPS

  Recently, when I turn on my computer is starts, guests of the computer and starts check my system files as follows: "checking file system on C: the Type of the file is NTFS. The Volume is dirty. "That is what this means and how can I clean and maintain the clean Volume, please? My computer is Dell XPS

  The computer system continues and invite "CHKDSK checks the files (step 1 of 3)... .

  The system deletes some files and at the end of shows, complete audit files and then show

  CHLDSK is verifying indexes (stage 2 of 3)...

  Once again, it shows the following:

  Deleting Index Entry _64280 ~ 1. jpg in index file 4632 $130

  Deleting Index Entry _64280552_little-mix_211112_get [1] .jpg in index file 4632 $130

  Deleting Index Entry 69gw [1] .jpg in index file 6722 $130

  Remove entries of Index 69 GW_1 ~ 1. jpg in index file 6722 $130

  Deleting Index Entry _64274754_messi_211112_elvis [1] .jpg in index file 6722 $130

  Deleting entry Index _64274 ~ 1. jpg in index file 6722 $130

  Finished the index checking

  CHKDSK is checking security descriptors (stage 3 of 3)...

  100%

  CHKDSK checks usn Journal...

  Windows control disc is finished.

  After all checks, Windows proceed to start as usual.

  I would like to know if I need the dirty Volume, and if so, how can I carry out the cleaning operation.

  Sometimes, at the early stage of the CHKDSK, the computer makes a pe. .. PE... noise and cut.  Then I turn the computer off via the key of the insulation. When I restart the computer, it then runs the check again until the end.

  Please advice me on the following points:

  1 is this normal as he started only happening in recent weeks?

  2. How can clean the Volume in order to show "Volume is clean instead of sale"

  I look forward to hear from you.

  Thank you

  Hi, Dr.,

  Volumes that contain file system errors are known as Sales. To indicate that a file system problem has occurred and that the volume is dirty, Windows XP Professional displays a message similar to the following when you try to open, delete, or rename a file or folder by using Microsoft Windows Explorer or the command prompt:

  Autochk runs if the volume is marked as modified.

  If the file system has marked the volume as dirty, Autochk runs the Startup Repair process. Volumes are marked as dirty, when the file system detects an error on the volume. If Autochk detects a dirty volume, it provides a delay of 10 seconds, and then starts the repair process. If you cancel Autochk when a volume is dirty, Autochk tries to run again after a 10 second delay every time the computer is restarted.

  See Chkdsk for all the necessary explanations:

  http://TechNet.Microsoft.com/en-us/library/bb457122.aspx

  Run the Dell Diagnostics to check the drive failure.  If the disc is a failure, it must be replaced.

• Help me I have Windows XP. Would be, or could you please tell me what the function keys are and how I could use them?

  I have Windows XP. Would be, or could you please tell me what the function keys are and how I could use them?

  I have Windows XP. Would be, or could you please tell me what the function keys are and how I could use them?

  Function keys are used to things dirrent, depending on whether you are simply Windows or a program of work, and if you work in a program, what program it is?

  This search through the documentation of programs you use. Read also here: http://www.internetfixes.com/definitions/IF01424.htm

• I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  If you try to send or receive messages, you may receive an error message similar to the following error message, which indicates that your Post Office Protocol version 3 (POP3) or host SMTP Simple Mail Transfer Protocol () is not found:

  The host hostname is not found. Please check that you have entered the server name correctly. Account: AccountName, Server: servername, Protocol: POP3, Port: secure (SSL): no, error 11001, error 0x800CCC0D Socket number

  In addition, you cannot ping or establish a Telnet connection to the mail server.

   
  This problem may occur if you have the firewall from Zone Labs such as ZoneAla software...
  This problem may occur if you have firewall software from Zone Labs such as ZoneAlarm or ZoneAlarm Pro, installed on your computer. These programs may prevent communication with your e-mail server.

  RESOLUTION

  To resolve this problem, remove the software firewall from Zone Labs of your compu...
  To resolve this problem, remove the firewall from Zone Labs of computer software. To do this, see the program documentation or contact Zone Labs at the following of Zone Labs Web site for more information:

  http://www.zonelabs.com/services/support.htm (http://www.zonelabs.com/services/support.htm)

  MORE INFORMATION

  For more information about ZoneAlarm or to contact Zone Labs, see what follows...
  For more information about ZoneAlarm or to contact Zone Labs, see the following Web of Zone Labs Web site:

  http://www.zonelabs.com (http://www.zonelabs.com)

  For more information on how to resolve a similar error message when you use Microsoft Outlook on a computer that is configured as an ICS Internet (ICS) client, click on the number below to view the article in the Microsoft Knowledge Base:

  252322 (http://support.microsoft.com/kb/252322/EN-US/) OL2000: (CW) Error Message: The Server could not be found using ICS Connection

  For more information on how to solve an error similar to Microsoft Outlook Express and ZoneAlarm, click on the number below to view the article in the Microsoft Knowledge Base:

  274456 (http://support.microsoft.com/kb/274456/EN-US/) error finding POP3 or SMTP servers when you send or receive e-mail Messages

  The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  later ducdive

• can you please help I am running windows vista Home premium and letters on the keyboard are in french is my question mark key e, what is the problem and how to fix it thanks Dan

  can you please help I am running windows vista Home premium and letters on the keyboard are in french is my question mark key e, what is the problem and how to fix it thanks Dan

  Your keyboard is set to french. To resolve this problem, look at the right hand of the bar at the bottom and you will see a keyboard. Click on it and press U.S..
  I hope this helps.

• Odiconsole error cannot connect to the specified repository. Please select a different alias and try again.

  Hello

  My tool odi 11g client is in linux server.

  ODI 11 g cilent (linux) and the server is linux server.

  I can not connect on behalf of the repository only job as workrepo210. His connection with success.

  

  I created two more workrepository11 wprkrepo211and repositories.

  To do this, I created two different users. I gave permissions also. I configured workrepositories details in odiconsole & admin console

  But I'm unable to connect to in odiconsole workrepository11 wprkrepo211and.

  When I try to these wprkrepo211and workrepository11
  

  I get the error message like

  Unable to connect to the specified repository. Please select a different alias and try again.

  
  

  
  

  
  

  Please help me.

  Thanks in advance,

  A.Kavya.

  Hello

  now its works well.

  I configured with default details repository work & maste rreposiory in the administration console.

  I configured the url jndi in odi console with the correct data.

  Thank you best regards &,.

  A.Kavya.