plot a point with curves

Similar Questions

• Color of these points with curves CS4

  Hi, I use CS4 and I want to do a color correction, I use the color sampler to select areas that I want to change it is to say highlights approximately 242, but I want to place a sampling point for the midtones on the RGB layers at the same time, for this, I understand that, if I hover over a sampling point and hold Ctrl + Shift , then click on what it has points of adjustment on all channels, but when I hover over my selector sample color changes from point sample to the move tool so I guess I must have hit a button somewhere but don't know where! Any help please.

  Thank you

  Russ

  I guess your work with an adjustment layer curves?

  You probably still have the color sampler tool.

  Select the eyedropper tool, or you can use the self-select-Targeted adjustment tool.

  

  MTSTUNER

• Plot a Point in a Pixel

  The help article to draw XY.vi led me to believe that the input argument of 'data' was x and coordinates are in pixels. So for an image which is 804 x 347, the point (400 175) terminates upward near the center of the image (near the bottom of the e with FED if you look at the FedEx truck picture I've attached - there is in fact a track point there but the datatip is stuffy).

  Instead, parcels of land XY.vi points as a regular graph - if 400 175 is the only point, he finds himself at the origin. Play with the specifications of axes does not seem to help.

  How to specify coordinates in pixels and plot a point at this location?

  Andrew

  I put the image in the background of a standard XY Chart and change the size and scale to match the size of the image.

  

• Form customized with curved edges - 8 Captivate

  Is it possible to create a smartshape customized with curved lines in 8 Captivate by using, for example, the polygon, drawing tool?

  You cannot draw a line curve immediately, but need of steps:

  • create a form
  • convert a freeform (context menu)
  • Now you can edit the points and tangent handles (Bezier curves)

  In this article, in the film, you will see such a curved shape. Here, I started with a star shape: Custom short answer Question - Captivate blog

  And in this picture, you see how I created an arc, starting with a triangle

  

• points with color on a scatterGraph diffenrent

  Hi all

  I want to score points with diffenrent color on a scatterGraph. The color of the point must be made based on the values of a combination of the primary color (red, green, blue). Perhabs I should use the 'Color.FromArgb (red, green, blue)' method to change the color. but I used the "scatterPlot.PointColor = Color.FromArgb (red, green, blue)" to change the color of the entire points on the ground. The number of points I have is more than 80,000. You have ideas better?

  Respect of

  Michael

  Hello

  You can customize the way points are drawn in the graphic Studio measure controls. See the example in chart that comes with Measurement Studio (... \Graph\CustomStyles\...).

  You can customize this way...
  1. write your own CustomStyle deriving from the PointStyle class.
  2. override the Draw() method.
  3 override the IsValueDependent property and return true.

  Here is the code snippet sample showing the same thing,

  Use an instance of these classes of style for scatterGraph.PlotStyle.
  Point color is based on the data.
          public class MyCustomStyle1: PointStyle
          {
              Dispersion of the cloud of points;
              public MyCustomStyle1 (ScatterPlot myPlot)
              {
                  Point cloud = myPlot;
              }
  Public Overrides Sub Draw (context of the object, PointStyleDrawArgs args)
              {
                  Graphics g is args. Graphics card;
                  Double x = 0;
                  Double y = 0;
  Rectangle rect = new Rectangle ((int) args.) Graphics.ClipBounds.X, (int) args. Graphics.ClipBounds.Y, (int) args. Graphics.ClipBounds.Width, (int) args. Graphics.ClipBounds.Height);
  You can get the data points x and y by the reverse mapping.
                  scatterPlot.InverseMapDataPoint (rect, new PointF ((float) args.)) X, (float) args. Y), x, y);
  Color c = Color.White; Replace the code here to map the value of your data with a color value.
  g.FillRectangle (new SolidBrush (c), new Rectangle (0, 0, 100, 100));
              }
  public override bool IsValueDependent
              {
                  get {return true ;}
              }
          }
  Point color is not dependent on the data
          public class MyCustomStyle2: PointStyle
          {
              private Random r = new Random();
  Public Overrides Sub Draw (context of the object, PointStyleDrawArgs args)
              {
                  Graphics g is args. Graphics card;
                  Color c = Color.FromArgb (r.Next (% 255), r.Next (% 255), r.Next (% 255));
                  g.FillRectangle (new SolidBrush (c), new Rectangle (0, 0, 100, 100));
              }
  public override bool IsValueDependent
              {
                  get {return true ;}
              }
          }
  

  I hope this helps.

• What it means when you see one point with an Ark on it by putting in your password for your email and your bank account.

  When I try to access my bank account and email, at the end of the bar where the password typed in there is a point with a bow. It looks like an eye. I've never seen this before and it makes me uncomfortable and seem as thought that someone may have hacked my computer in order to get the passwords. What does that mean?

  Hi Christine,

  The point with a bow that resembles an eye to reveal the password you enter. It is used to avoid typing the wrong password and clicking the eye symbol, you can correct it if it is typed incorrectly.

  1. what operating system is installed on your computer?

  2. what email you speak?

  3. who is your provider of mail service?

  4. what web browser do you use on your computer?

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Implementation of access point with WRT54GL

  Hi all

  I am very new to this wireless networking thing.

  I'm having some trouble with my wireless router.  My ISP gave me a wireless Huwaei modem but I live in a two-story apartment and modem from the ISP plays well on the second floor, the signal is very weak.

  My problem here is that I am trying to use my router to broadcast the signal to the floor.

  Is it possible to set up an access point with my Wi - Fi router?

  My idea is that the router would be placed in another part of the apartment and clone the signal from the modem wi - fi and move this signal. I want to place the wireless router in the second floor.

  Such an action is possible?

  Thank you very much for your help.

  You can set the WRT54GL as Access Point, both your two routers must be wired to the other...

  To make the two routers are wireless, is not not possible.

  For both routers works between them, connect the Ethernet cable between the LAN Port of your Modem to the Lan 1 Port on the Linksys router. Click here and follow the instructions how do your Linksys router works with your Modem.

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• With the help of new access points with old WLC 4100; LWAPP layer 2 switching 3-tier

  Hi all

  We currently use two solutions Wiresless LAN - a 10 AP1230 access points-based autonomous (5 years) and a solution based on a Cisco WLC 4100 (4112, running 3.2) with 12 AP1010 LWAPP access points.

  First thing, we are considering to replace the stand-alone solution with the WLC one. However, I'm not sure if we can use the new access points such as the LAP1041N or the LAP1252G with our current 4100 WLC. Access reported data sheets 'Cisco Unified Wireless Network Software Release 7.0 or later version' 'software '. Does this mean that these access points can only be used with controllers running 7.0 or later?

  If we are unable to use the new access points with our current WLC and need to buy a new controller: can we use access points AP1010 current with a new WLC as the Cisco 4402?

  Second thing, it is that we want to expand the networks configured on the WLC 4100 to another site that is connected via VPN wireless. Wireless Setup guide indicates that the LWAPP mode can be changed from Layer 2 to 3 layers so that the access points can be configured with an IP address, which allows you to place access points basically anywhere as long as IP connectivity exists between the AP and the WLC.

  Y does it as described in a document with the change of mode LWAPP layer 2 to 3 layers? Or ist just the following steps (if I understand correctly):

  -Change the Mode of Transport LWAPP on the controller of layer 2 to 3 layers

  -Creation of a PA-manager interface with an IP address in the same subnet as the management interface (tried that, without changing LWAPP mode transport first and not was not possible - error)

  With regard to different sites:

  -Configure option DHCP 43 with the IP address of the WLC or DNS with CISCO-LWAPP - CONTROLLER.localdomain

  -Make sure that the interface ap - manager can reach points on the different site

  Is it really just as simple as that? All information about it is very appreciated!

  / edit: I would also like to know if the 1260 series access point are backward compatible with 802. 11B. Whereas it is stated in 1040 and 1250 for example series data sheets, it is not particularly mentioned in 1260 data sheet.

  Thank you

  Michael

  Well, let's start with the simple question/answer

  With regard to different sites:

  -Configure option DHCP 43 with the IP address of the WLC or DNS with CISCO-LWAPP - CONTROLLER.localdomain

  -Make sure that the interface ap - manager can reach points on the different site

  Yes, it's as simple as that.

  As for other issues, looks like you would be better served with a forklift upgrade.  New controllers and new AP.

  Now, the AP 1230/1240/1250. all work on the 4.2, 1140 code starts with 5.2 and 1040/3500/1260 are 7.0

  The AP 1000 series is not supported after 4.2 code.

  Refer to here for the complete list of the AP and taken codes supported:

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html#wp610751

  From what I see, the 4100 is not supported after the train of 3.2.

  So, it really depends on what you are trying to accomplish with the upgrade.  If you are looking for a 80.211n support, you really want to be 5.2 or better, we had some problems with MRR + 40 Mhz channels, 4.2, 5 GHz band only.

• Navigation in both sense between the anchor points with "prev" and "next buttons?"

  Hi all

  I'm working on a horizontal presentation site that has anchors on each part. That the user scroll, he snaps to each anchor point. It works fine with just the mouse wheel, but I wish I had previous buttons and following which allow easy navigation between points. I know I can have buttons to jump to say on each article has > B > C and then C > B >, but it's a simple "prev" and "next" buttons that are pinned to the page as a whole. Then, as the page scrolls from left to right, the buttons remain in place. Is it possible to have them just go to previous and next in the line, rather than linking a button to anchor point A, B, C, etc.?

  NEW WIDGET! Navigation in both sense between the anchor points with "prev" and "next" buttons http://goo.GL/TMbZRc

• How can I change the color of the plots (lines, points) in the collection Scattergraph plot

  For example, I go through a foreach loop and draw two points. How to distinguish this set of plots of the yet to come? How can I change the style, color and have separate lines (instead of on the line connecting everything) for each of my plots? I don't know how to set everything up, but it still does what he wants to do. TIA.

  Hello

  The problem you see occurs because of the following lines of code:

  The _data and _data2 scatterPlot3 value

  _data = scatterPlot3

  _data2 = scatterPlot3

  When you do this, you define _data as _data2 to reference an object of the simple concession - scatterPlot3.  Yes, even if you have (from the code you have posted at least) three slots in your collection, they are all pointing to the same object of point cloud.  So when you change the color for one, it changes the color for them all.  However, I think that you have fallen on the right solution in your last sentence.  If you want to have multiple locations on your ScatterGraph, each with its own color and style, they should each be separate and unique plots in the collection plot of your ScatterGraph.  Based on the code you posted, you'll see this if you comment just the two lines shown above.

  Please let me know if something is still uncertain.

  NickB

  National Instruments

• How to plot several points in real-time on a XY chart in different colors?

  Hello

  I am a beginner of labview.  Here is a screenshot of the program. It provides information in real time to a patient when walking from their foot position, random target (points Exchange with each step) and a reference point (constant).  At present, data from three points are grouped in the same plot on the graph XY.  In the graphics property, when I change the color for field 0, every color change.  I tried to connect the XY graph in table built above, but a cut wire it occurs (connected 2 groups with different content).

  Any help would be great!  Thank you

  Amarcher wrote:

  Thank you.  I tried to change the plots in properties, but it did not work.

  Here's what you can do with very minor changes. It is basically the same as in my previous example.

  

• Sharp point with the pen tool

  I make a mask with the pen tool, but I can't understand how to connect 'pointed' to a curved line; I know how do either straight lines or curves, but how to connect to sharp curves?

  Hold down the CTRL key when you move the Bezier handle.  This it break so you can get the acute angles.  The acute angles of Dave however cannot be broken... hehe.  Dave just joke.

• Vector glitch of anchor points with the transformation of the cs6 illustrator objects

  Vector anchor points glitch during the transformation of objects,

  It is if I create a square and turn it, let's say I have it increase by 200%, it creates additional anchor points in the square corners and also creates weird crenellated edges, when I hover over the square with the slider to show the edges, the line from the edge which shows blue is shifted in at the edge of the actual object reference (see attached img the orange object displays the quirky plan and the black object is supposed to be a) round square edged, but after that I turned (Shear 10 degrees) it apeared of curves in stairs)

  I already tried to launch updates and restart, but the issue continues to display.

  Thanks in advance for your help.

  Rob.

  

  Looks like it's related to 'snap to grid of pixels.

• Designjet z2100: points with every print

  I have a row of points on one side to each print.

  Photos below

  

  Could someone tell me what are the causes of the problem?

  The fact that once you clean this area points disappear tells us that the plotter is somehow always disposting of ink in this area. Do what asked the above post and I also want to remove each print head, one at a time and clean up the edges to verify that there are no residual ink being placed down by the edges. Do not clean the center of the printhead with anything as you may damage the nozzles.