Strange problem with card sound and speakers on my Satellite A100

Similar Questions

• Could not find the problem with the sound and speakers

  Hi, I have a Pavilion dv7 with windows 7 and there is the sound of the computer, commissioning, but if I try to watch a video or listen to music online there is no sound. Also if I open Itunes, and I press play on a song of the song does not play. I tried using media player but it says it can not play either.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58226.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Strange problem with the KING and IMAQ find right 3 edges

  So first of all, I noticed that the KING produced by KING features seems to have an incompatibility with the entrance to find right IMAQ 3 edges:

  

  In my code, I have the strange problem "IMAQ find right edges 3" is the production of edges that lie outside the limits by the wired KING specifided: "."

  

  In this case, a return on investment, defined by a rectangle, I [476, 1559, 752, 1779], but the best line produced by VI shape is outside this rectangle (see ordered 1876).

  How is that possible?

  I finally thought to it - it was my fault. I was updating the global rectangle in the KING entered correctly, but not the contours.

  I fixed the wiring and now it works fine.

  Detective Conan!

  G

• Problem with the sounds and animations working together...

  Hi all

  I learned how to use Adobe InDesign recently (as in...) Today).  I adapt well to the format after only a few hundred moments of pulling hair.  I create an interactive document and there is a place where I want an animation and sound to play at the same time when you hover over this task.  I figured out how to add a button to the region and I used that to the sound.  Then I discovered that I could add an animation to the button as well.  However, when the button is hovered over, the sound is played, and then, once it's done, the animation occurs.  I discovered that if I put first animation online, then the opposite is true.  I get the animation, then the sound.  I need them to play at the same time as the sound IS the sound effect for the animation.  SOOOO... I tried to put the two buttons, two of them wired to turn off when you move the cursor over them, but that didn't work.  All I get is any button is on top.  They are not both work with a hover.  Is there a way to make the sound and animation to play together, in the sink with the other?

  You will see your animation and sound in the distribution panel. Shift-click to activate both and click play together on the bottom of the Panel.

• Problem in installing drivers Sound and Bluetooth in a Satellite A100-712

  Hello everyone

  I have formatted the hard drive of my laptop Toshiba Satellite A100-712, downloaded the sound and drivers BT of this amazing site.

  But there is still a problem.
  In Device Manager, there are yellow signs with the realtek drivers and bt. I don't know what to do?

  Please, you can list the steps for a correct installation for these drivers?
  BCZ I'm crazy... :(
  Thank you

  Hello

  First question: why you n t use the Toshiba Recovery CD?
  This CD contains all the drivers, tools and utilities, and you do not have to install any drivers separately

  Secondly: The Toshiba driver page, you should find the installation instructions document
  Just follow the order of installation mentioned in the txt file and everything should work!

  PS: Don't forget to use the right drivers. I think that the A100-712 is outside the PSAA9E series

• Satellite A300 and Win7 - strange problem with card speakers\sound

  Hi all
  I work on one - A300-1MO with win 7 ultimate 32 bit

  In the last few days (since I installed the Bluetooth driver but I don't think that it's important), sound card and the speakers of the laptop, go to be dumb to be active, sometimes in large volume.

  It bothers me a lot because my computer is noises while I'm in classes (from apps running\web sites etc.). I've almost been hunted class several times because of this.

  I tried the sound card on the console of windows and the application of the sound card of inhibition, it doesn't help.

  I'd appreciate any help.

  Thanks a bunch
  Return on investment.

  Hello

  Have you tried to reinstall / update the sound card driver?
  I think that this should be the first step you should try.

  The laptop uses a Realtek audio chip.
  Visit the Realtek page to get the latest Realtek audio driver.
  Remove the old audio driver installed and after reboot new try the audio downloaded Realtek driver.

  Welcome & good luck

• Strange problem with call manager and call before all

  Not sure whether this post about unity for or CCM. I will post on both. I have a main number customers dial in. When they call this number and they do not get a response, it passes to a call handler. This call handler has an option of entry of the appellant 3. If they hit option is three transfers to an IP phone on Call Manager who is assigned to the CFA for this cell phone to people. Everything works except when the call is sent to the PSTN it sounds for time and then disconnects. This number can be called directly from the system with no problem. The cause of the disconnection on debugging is the following: because I = 0x80FF - error of interconnection of networks; not specified. Please help if you can.

  I assume you are using version transfers here. You can give it a whirl with supervised transfers?

• Strange problem with the button "Enter" in Vista on Satellite P300-225

  A few weeks ago I don't remember exactly when, Windows Vista on my Satellite P300-225 began to spend an incorrect applications scancode when you press the Enter key. It always sends the scancode of key keyboard, even when I hit than the alphanumeric part of the keyboard. It was working properly some time ago, but suddenly, it just started acting like that. No remapping all keys.

  Since there are very few programs that Act different on these two keys, it has become quite an annoying problem.

  The strangest part of it, is that the problem seems to be somehow related to Windows Vista, as the keys are properly reported on Linux.

  If anyone has any idea, please let me know.

  > I'll give a try to uninstall the keyboard in SafeMode but.
  Please post the result.

• Satellite Pro C650D - problems with the audio and game controllers

  Hello

  I recently had problems with my microphone and speakers/headphones and game controllers.
  Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Stakeholders sometimes still work when I connect headset.
  Some of the sounds are still coming through the speakers while some coming through the headphones.

  I have a usb game controller which also did not work everything properly.
  If I assign buttons in the program that they do not work in the game.

  All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

  Any body have similar problems or know what to do better?

  See you soon
  Laurin

  Hello

  Can you please send some details on the laptop model and the system you are using?

  With regard to the issue of sound/mic:
  > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Are you talking about internal microphone or external? This only happens using Skype?
  In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

  > Yet sometimes the speakers work when I connect headset.
  I recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295

  The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
  She wrote:
  + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
  + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

  + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

  Regarding the game controller:
  > I have a usb game controller which also did not work everything properly.
  > If I attribute buttons in the program, they do not work in the game.
  I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

• Sound card error: there is a problem with your sound card

  I get the message "There is a problem with your sound card".

  This happened after that I think I uninstalled 'Realtek' by mistake.

  Could be the problem? If so, how can I recover?

  Reinstall the drivers for your sound card - looks like you might have uninstalled due to inadvertence their.
   
  
  --
  Richard Hay
  http://WindowsObserver.com
  Unofficial Microsoft and Tech evangelist
  "I'm a PC!"
  MVP Windows Desktop Experience

  "Namerof" wrote in message News: a18cdd27-8264-45a5-bf84-84ff03fb01b1...

  I get the message "There is a problem with your sound card".

  This happened after that I think I uninstalled 'Realtek' by mistake.

  Could be the problem? If so, how can I recover?

• Problems with the sound button and the wireless button

  I have a computer laptop dv6-2155dx, and he has a problem with the sound, the button bar button and the wireless button, all of them continue to work, I do not know if I made a mistake and let them turn off or there is another way to get available.

  I need some advice.

  Hello

  Do a hard reset:

  1 disconnect all devices and remove all USB devices and multimedia cards.

  2 disconnect the power adapter, remove the battery and then press in and hold the button for at least 1 minute.

  3 reconnect the power adapter (do not connect the battery), press the power button

  Verification is your problem is resolved or not.

• I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

  I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

  

  In addition, the Console has opened with the same message several times, but I don't know what that means.

  Any help would be appreciated.

  Hello

  The last is a picture of the Terminal window.

  Just because it lists 'Console' does not mean that it has nothing to do with this application.

  You have not said why or what you're trying to install so I can't help with that.

  You can use the activity monitor to leave their.

  After you select an item, use the X in a type of stop sign icon and confirm force quit.

  

  21:36 Thursday; September 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• I'm having a problem with a sound used for Norton ccSvcHst.exe process. And perhaps dwm.exe

  I'm having a problem with a sound used for Norton ccSvcHst.exe process. I have all the dates of the last mounted and I roughly 1 000 000 errors page an hour and the hard drive of my computer is crazy with me doing nothing. Norton has been included in the software package supplied with the computer. so I hope that support you. What can I do to calm my computer runs to stop this service... I have also about 500 000 for the service dwm.exe. What could cause this?

  Hi dude, on average

  A. from when what happens?

  B. recent changes made on your computer?

  C. you get any error message?

  First of all, I suggest you to uninstall and reinstall Norton using the Norton Utilities disk and check if the problem persists.

  Second, you may have to perform an auditor of the system files on your computer in order to replace the files corrupted on your computer.

  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  Type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Bindu S - Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I HAVE NO SOUND ON SPOTIFY... IT ME SAYS THAT THERE IS A PROBLEM WITH MY SOUND CARD... HOW CAN I FIX THIS?

  I have no sound on Spotify... ItTells Méthéré is a problem with my sound card... How can I fix this?

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  It works for win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Strange problem with its virtual on my Satellite A100

  I have a problem with Virtual Sound on my Satellite A100-638 with Windows XP. If VS is turned on and Windows plays a sound of Windows, as when an error appears, the volume increases.

  When the VS is off, the problem does not exist, but I would have turned on VS, cause, I play a lot of music! I tried to upgrade level or upgrade to other versions of VS, but the problem is still there. I also tried to uninstall and install my sound card drivers.

  Can someone help me with this?

  Hello

  I put t know what is the problem. Your description is incomplete and very strange.
  Usually it's not easy to say what's wrong because you have already installed the 3rd party applications that could only unique functions or have a bad influence on all operating systems.
  I assume that the registry is damaged.

  If we can continue the speculation after the recovery completely portable.