Plot.Plot color bug?

Similar Questions

• 3D graphic color bug

  I just discover new objects of chart 3D (LV 2010) and noticed a strange behavior.

  If you colour the graphical object (not the plots), it cannot be cancelled (in other words, Ctrl-Z does not work).

  That's fine, being a simple work-around to paint the object returns with the original color.

  I think that it is considered a bug nonetheless.

  However, it's something even more bizarre: If you paint the buttons 'Point of view' (or whatever they are called), depending on where you click with the brush, you can end up with a square middle button as shown below (at the bottom right):

  

  The problem is it seems to be a workaround.

  As Ctrl-Z does not work, I tried to paint the square with a transparent color and a few color combinations, but could not find a way back to the original 'no hidding the glyph square' situation.

  The only solution is to "Return" to the previous state of VI (which is quite dramatic), or remove the graphic object and set a new mark instead (or replace it with a brand new), which is barely less drastic.

  What is a "known feature"?

  The colors were staying not after you savings is the default setting for the 3d graphics but can be changed to stay after recording.

  The mysterious projection palette color boxes that appear are due to a Boolean textbox on each of these buttons. The odd square is the bottom of the text. You should be able to do this boolean text invisible in replacing it with a sticker instead.

• Replace Document colors Bug

  All known bugs to replace the colors in the document?  I am running windows 7 with new Acrobat Reader DC.

  For example, if by default my document is black text with a white background and I change the white text and black background (Edition > Preferences > accessibility), I now have with black background and white text pages and other pages unreadable with black text on a black background.  Again, I have change the green on a black background and yet my entire document has a black background, but now some pages contain the green text, others have white text, and others have black text and cannot be read.

  What is the fix for this problem of accessibility?

  This does not solve the problem.

  The problem seems to be that Acrobat Reader only changes the color of the text for a single page in the document.  I found a work around by going to Edit > Preferences > accessibility.  There's a box of "change the color of the art online as well as text.  If this box is checked, then uncheck the box; If it is not checked, then check that it and the color of the text for all of the document should now be correctly formatted.  This procedure seems to ignore any bugs in the code it keeps updating the color of the text on each page, but these steps should be done whenever you need to change the color of a word processor based PDF.

• Types of classification coloring Bug in 4.0.1?

  The coloration of the Classification Types feature affected in 4.0.1?  I can't get all the colors to change.

  Looks like they worked well in 4.0 to: http://kentgraziano.com/category/data-modeling/

  Hello

  Thanks for the reply. I just realized, I was clicking the OK button only and not the button APPLY.  I assumed that the OK button also has an APPLY operation.  Alas, it was not so.

  All good now.

• Color bug (program error)

  Hello everyone

  I have a little problem since the week last with my photoshop CS6 extended. Everytime I try to choose a color or a change that my color of background and foreground, Photoshop tells me that he cannot perform this action because of a program error (I'm translating for my version of Adobe is in french). Someone already had this kind of problem?

  Thanks for your replies

  You may need to reinstall Photoshop. If you do, you want to make sure that you disable Photoshop first. You can also use the cleaning tool.

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

• The history of color bug

  If you take a color out of your story, then the change that the new color is not saved in the history. The colorpicker eliminated (very annoying), which makes it almost impossible to recreate a color created in this way. Can it get fixed (or better, bring the selector)

  I discovered when this problem occurs. It's when you choose a color and use the press to fill. If you draw, and indeed in the history, but if you meet only, it is not. Thank you

• How to force the colors of graphics path of waveform?

  Hello

  I have a problem forcing my WaveformGraphs to have colours in the specific field. I changed the properties several times: he returned to another color when I restart. I tried the Plot color with active Plot property node: it says it can not work (maybe I didn't do it well). I did the graphics of type defs, changed their properties, it is their default value and then saved. I need the 3 graphs have the same colors of conspiracy because they are related.

  Do you have any tips for me?

  Here's a way to do it. This will outline the first 4 colors in each graph plot.

  (Get the references of your chart and put them in a table for the entry.)

  

  Steve

• How to draw with multi colors in a single graph XY?

  Hello

  I do hesteresis measures. In this case, I collect the data while sweeping the voltage first from 0 to 2V and then again from 2V to 0V, and the data is plotted in a unique XY Chart. XY graph, I want sweeping plot forward a color while the scanning reverse with another color, so I can easily make comparisons. And I want to see the real time data. I tried to wire 'plot color' in 'property node', but that will change the color on a global scale and cannot be applied to a data section. Can someone tell me how to proceed? Thank you!

  Guanglei

  Hi Guanglei,

  see the attached example.

  It will be useful.

  Mike

• How can I change the color of ground on a type of dynamic data graphic waveform?

  I have several different plots on different graphics, and I want to set the colors different waveforms.

  To view the waveforms on different graphs, I went to the dynamic and then divided data type wire

  According to the number of channels I have.

  I can set the background color of the chart with a property node and create sliders of different colors without problem

  using the table of references that I created, so there's nothing wrong with my table of references or the property node.

  As soon as I try and a box of thread in the plot color > control color to draw, I get error 1055 on the property node.

  I was wondering if it was an error between keyboard and Chair, but now I think it's something more sinister.

  The error box appears and cannot be fired left the update until I run TASKKILL on LabVIEW and terminate.

  Any ideas on how to achieve my goal would be appreciated.

  (LabVIEW 8.6)

  My colleague has just acknowledged my problem and pointed me to the solution. It seems I need wiring in the value of "active conspiracy" of the loop each time and to ensure that this takes place before the update to track color.

  I have attached a picture of a labour code. I intend to combine the whole lot to the node of a property with the active plot at the top so that it executes first.

  Thank you for taking an interest Sheela

• Setting color and other attributes to the elements of path on a layer in the doc.

  I want to put contour (swatch existing spot) and other attributes like width of overprint and stroke color to points on a layer("DIE") of target path in the active document. I have already defines what I want all existing elements of path on all layers. I tried ways to index the target layer to "DIE" but might not seem to operate.

  If (app.documents.length > 0 & & app.activeDocument.pathItems.length > 0) {}

  var doc = app.activeDocument;

  for (var i = 0; i < doc.pathItems.length; i ++) {}

  plotSet = doc.pathItems [i];

  plotSet.filled = false;

  plotSet.stroked = true;

  plotSet.strokeWidth = 2;

  plotSet.strokeOverprint = true;

  plotSet.strokeColor = doc.swatches ["PLOT"] .color;

  }

  }

  Here is an example of code rewriting your script:

  if(app.activeDocument.layers.getByName("DIE").pathItems.length > 0) {
  
      var tgt = app.activeDocument.getByName("DIE");
  
      for (var i = 0; i < tgt.pathItems.length; i++){
          plotSet = tgt.pathItems[i];
          plotSet.filled = false;
          plotSet.stroked = true;
          plotSet.strokeWidth = 2;
          plotSet.strokeOverprint = true;
          plotSet.strokeColor = doc.swatches.getByName("PLOT") .color;
          }
      }
  

• On the 2nd monitor color management

  In the file of Lightroom_3_help.pdf ("update 03/12/2010') provided with LR3 (p22 low), it is said:

  «Note: Lightroom does not color - the view from the library on the second monitor module.»

  Is this correct?

  I have two monitors: one about the Adobe RGB (a HP LP2475w) range and the other about sRGB (an old Samsung), as well calibrated and profiled.  However, if the same image is displayed in library view on both, the colors displayed on the second monitor are virtually identical to those on the first.  It's true, no matter who is the main screen of LR and that is the second monitor.  But if Lightroom isn't a not color-managed the second monitor, the image would be likely sent as ProPhoto, which seems very very pale any monitor were the other.  Even though Lightroom has made the image as sRGB always on the second monitor, then there will be a significant difference when the monitor range were the second monitor (apparently not managed).

  Anyone can shed some light on this?  My tests suggest that the second control is managed by color.

  The display is fully color managed on both screens for me. It must be

  supported the monitors thus or otherwise second would be completely useless. It's

  that is trivial to do so as long as your profiling solution supports it

  true for all Macs and most modern windows machines. To me, this looks like to the

  Manual is simply false and the s sentence a vestige of when they first

  added bi-ecrans support. I remember there being color bug

  with it, then where he could catch the wrong profile display. It comes

  clearly not true anymore.

  PS Adobe Gamma? This tool has been deprecated since many years! Person not

  in their mind has yet to use it. Material calibration tools are

  cheap and widely available today.

• Save the Studio measure waveform graph as a file for reading later

  Hello

  I would like to know if there is an easier way to record data are rendered on a waveform graph (configured as a graphic of the band) to capture incoming data in the code and send copies of it to a file. It would be nice if there was a method to do this, with all relevant metadata stored in the file (color, etc.). Better yet, the file could then be opened in a labview application (for example, a TDMS file) for later review.

  Thank you.

  PS. I use VS2010 and MS 2010.

  So, it looks like you already have all the data points. For metadata that you mentioned, line color, plot colors, point colors, line styles, etc. are all accessible from the properties so if you wish, you can retrieve all that data.

  I think that upon return from t0 is the same compensation history, you can use the ClearData() method.

• Change the Sub.vi field

  I want to make a sub.vi to manage all of my property nodes that I use to customize my XY graph, and I have a general question about how I connect.

  Attached is a composite of 2 fired, the bottom is the expanded view of the sub.vi to change the route.

  In my main program (represented by half superior) my "Vibration response trace" is elsewhere in the .vi, within a state machine within a producer/consumer.  The .vi change parcel will be run before or after the plot has already been formed, not while he is in training.  (it is not placed inside the state machine with the real indicator of XY, but outside of it).

  I didn't know how to make nodes property to reference my field correctly when you use a sub.vi.  What I ended up doing was make a graph XY CONTROL in the sub.vi and wiring of a local variable in compatible reading at the entrance.  (I can not turn the main XY graph in the program in a control because I use the original indicator and a "build graph XY" to write about it.)

  I am concerned about 2 things:

  (1) if the nodes in my property will return the correct plot and change the background, plot color, etc. correctly in the main .vi

  (2) If using a local variable as long as such short risk to wipe the main XY graph to clean up data, i.e. If the local reads the chart before the data are there, but don't run the sub.vi until after data is collected, will it reset my chart when it crosses the sub.vi

  You must create a reference to the curve XY in the main VI.  Pass this reference to the Subvi and use it to access the properties and methods of the chart.  Everything you will ever in and out of the terminals as you do now is the value.

• Graph plot legend colors Signal not updated when mixed with the property node

  Hello

  We try to put the colors of the trace of a graph of Mixed Signal using a property node. Although we can change the color of the data in the field correctly, the colours of the plot in the legend do not change until some apparently unrelated operator action is performed (for example, to resize the window or by double-clicking a field name).  Waveform to XY charts don't seem to have this problem.

  Anyone know a work around?  I think I saw a similar topic on the forums earlier, but I'm sorry that I am unable to find it now

  See attached vi.

  Thank you

  -john

  I should probably have joined the last post of VI, but I have has been a thread of error between the two loops.  I also deleted the text you had so I could see the I need to press the button.

• XY graph multi plot points and color control live

  Hi all

  I'm doing something that should be simple, but difficult so far. I had a good look through previous topics and found similar things, but not really what I want.

  In my experience, I'm scanning intensity vs. wavelength.

  Ideally, I want to be able to:

  (1) scan and see live plotted points.

  (2) then I want the plot to stay on the graph when I run the following analysis, etc.

  (3) I have an arbitrary number of scans. for example to start a scan, I press a button, an arbitrary number of times.

  (4) I want to make sure the current analysis is drawn live in (red), and all the previous analyses are drawn in a different color (blue).

  (5) sometimes I want can erase the graph of all scans and start over, without having to stop the VI.

  Items 1-3 can be supported easily by placing the XY graph building and the XY graphic object inside the loop that runs the scan and uncheck 'clear data on each call' in the properties of graphic generation. See the first VI attached.

  However, at the beginning of an analysis, she joined the last part of the previous analysis up to the first point of the next scan.

  The difficult parts are 4 and 5.

  For article 4, you need to build an array of plots, which is easy if you know the number of plots, but here the number is arbitrary. So, how do I do that? I had a go trying to use Insert table in different ways, but I haven't worked on it. Then if all goes well using the graphics property XY nodes I can adjust the colors of the plots.

  For part 5 is not just enough to use the invoke = node reset by default, and have a button that executes the node. This clears the graphic but then when you run the following analysis all parcels previous pop up once again, indicating that the table that stores the plots is not actually deleted. The second accessory shows how I delete the chart.

  My biggest problem is point 4 and combining point 4 and 5 together.

  Help, please.

  I fixed the problem of the route doubly table and added in the desired color, attached plot.

  The code now done everything I wanted to in my first post.

  No doubt the code could be improved more, but that's for everyone out there who has this problem.

  Thanks to tst for give me useful advice.