Plug-and - icon representing a lightning, black screen, mac stops

Similar Questions

• Try power upward and he would keep a black screen for a few seconds then turn off and turn on and repeat until I've done a hard stop. I got a message on the svchost.exe

  Original title: help - csvhost.exe and problems to start

  My sons laptop has problems - try to turn on and it would maintain a black screen for a few seconds and then turned off and turn and repeat until I've done a hard stop.  I am able to navigate to the top after repeated attempts.  I could take a quick and complete hard drive test and it passed... Finally, I restored to factory and spent the last 8 hours going through the update process.  It works fine and restart without problems until recently - I followed the instructions to reboot to perform an update, but he had served in the "shutting down" mode for almost an hour I did a firm hard down.  It took a few attempts so he could begin after that, and when I did I had a message on the svchost.exe and thought that might have something to with him... found a site that has a download that is supposed to fix errors and am curious if that is recommended or whether there is another solution or possible make my misfortunes.  The site is: http://www.exe-error-advisor.com/svchost-exe.  I don't know what's happening - the computer works very well when it turns - to be fair, I did also made an update of "HP Total Care Advisor" who has nothing and after I rebooted I could not make it work... "HP Advisor has stopped working"

  Any ideas or advice?

  replied in the other thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/help-svchostexe-and-problems-booting/cd6ef667-7833-4f34-B976-ffded620a208

• my laptop turns on and immediately goes to a black screen with a request for password

  my laptop turns on and immediately goes to a black screen with a blue pop up asking you for a password.

  Getting started doesn't let me go to F2 or F11 or F12.

  THE SCREEN STOPS JUST AFTER 3 ATTEMPTS.

  Help!

  I don't know who installed it but I can't use my computer. (I have teenagers, and no one will admit to it)

  Sounds like someone put a hardware/BIOS password on your computer.  You see the Windows logo?  If this isn't the case, then you must know about this, which has put the password and have them removed.  If we cannot help you.

• Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  I left by mistake a USB in the port when I restarted my computer (Windows 7).

  Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  If I press ESC during startup and access the start menu, something marked WED... is highlighted and I press on enter and it starts normally.

  How can I get Windows 7 to do a normal boot without having to access the Boot Menu each time?

  Thank you.

  Tried that, but it did not work.  Finally got and IT guy come and it took him 3 1/2 hours to repair.

  Need a bootable floppy which has then repairs itself.

  Lesson learned.  Have an available for each computer startup disk.

• Why the screensaver stop working after a few minutes and then go to the black screen permanently?

  I use Vista Home Premium with Explorer 8. My screensaver always works for about 5 minutes and then stops and goes to a black screen. Still black screen and my screen saver active ever again until I have move my cursor to display the page I was on. The screen saver does not available parameters except to set the number of minutes, I want to start. I ran antivirus, anti-spyware-malware etc the gamet, but anything is wrong with the screen saver. I am blocked and never had this problem before. Anyone know what is happening, what is the cause and how to fix this?

  If you changed your diet plan or changed some settings for your course, it can happen.

  (1) go in the bottom right of your screen and click on the battery icon and click more power options (assuming that you have a laptop. If you don't go to the control panel (Classic view) and go into power options)

  (2) on your package (indicated by a blue dot next to it), click on change plan settings and navigate screen however turn it off for a long time, you want it to be before he turns off the screen.

  I do not recommend messing around with drivers, because when I did, it messed up my screen and ended up back where I was before she has nothing (sorry James). of couse I messed up a little and the only real problem was the catylist control center has disappeared, and when I tried to fix this, I came across problems (it looked like a safe mode without the mode without failure of words on the corners)

• Re: Satellite A300D-15B - BIOS update failed and now I get a black screen

  I've updated my laptop to run windows 7 instead of vista some time ago and my laptop was running, but the fan seems to stop working and I found that a BIOS update can fix this on this forum. The BIOS update has stopped responding partially through and I had to shut it down. I tried to run again, but he continued to come up with an error message. The laptop was working fine, but once I turned it on the next day I found that it is only responsible to a black screen. My laptop is out of warranty, but I thought I would send it out the hope for a decent price, but she came back with a cost of mounting A £400 for a replacement motherboard and price tag. Anyone know if these types of problems can be repaired without full replacement necessary?

  Thanks to advanced to someone who can help :)

  Hello

  You must contact an authorized in this case service provider. You should speak with the technicians because they try to reflash the ROM module where the BIOS is stored. This isn't expensive and it s worth a try! ;)

  You can find a list of the ASP s here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  But in the worst case you need a new card of mother, but technicians must try to reflash the ROM module first

• EVGA GTX 650 Ti SSC and HP H8-1455 compatibility (black screen)

  Material

  HP H8-1455

  Win 8 64-bit

  Black screen (problem)

  When installing EVGA GTX 650 ti SSC

  Try installing an EVGA GTX 650 ti SSC in a h8-1455 HP with a 460w power supply.  I uninstalled the 7570 AMD drivers and disabled startup secured on the motherboard (EVGA support).  I'm leaning towards what is either a related problem of bios, or not enough power through the connector 6-pin.  I tried two different cards same question.

  Any other ideas?

  Fixed.  In addition to a new power supply and by disabling secure startup, you must also enable legacy support.  Found a thread on a site of Nvidia.

• Photoshop Save and open pop-up windows black screen

  After upgrade my mac to the latest el capitan (10.11.5), I noticed that photoshop cs5.1 acted upward. I can no longer open or save files because the pop up screen is all black. I looked in other forums and tried to change the General on Acrobat preferences that seem to help some people with their problem, but it did not help me.

  The pictures below are what looks like on the screen when you try to open a file and when you try to save a file.

  

  I am at a loss on what to do, as I do not know if there is a problem with photoshop itself, or just the update more recent el capitan.

  Thank you in advance.

  CS5 is not supported and could be a problem with the latest OS, but first of all I would like to try to reset your preferences: restore default preference files

• HP Pavilion 500-274ea: Hello, I need help please I installed the graphics card and nothing comes only a black screen

  Please help me I bought a new power supply 780w I had 2 graphics card work in my old pc, but on the new pc they do not fan spins everything well but no screen when I plug my graphics card? What should do?

  http://support.HP.com/us-en/document/c04177680

  It comes to my pc

  I fix thanks for reading. I just had to play in the bios for a bit lol like 2 hours but I did the job

• Update blackBerry Smartphones os6 and all I have is black screen reset/reload 'Blackberry '.

  I have a Bold 9650 and last night I updated to OS6, the undate seemed to go ok, I even had a little video to show the features, but then he told me that I had to update my email addresses, and when I did I was told to reboot to complete the update.  At this point I got was the start to the top/reload screen that says Blackberry with the white flag of the restart procedure.  The complete line indicating that the process is complete, but it is stuck on this screen.

  I have taken the battery several times, and the same process is repeated.  Any ideas on how to get my phone working again?

  Thank you!

  Thank you very much for this information.  It was my original plan, but I didn't know how to go on this issue.

  I ended up going in Blackberry Desktop Software and applications, I noticed that I had 2 email, configure applications.  Since this is what I was doing when it failed, I removed the older (thought it was probably the surplus OS5 and incompatible with the new OS) and it worked.  I did a restore and everything seems to work fine now.  And I'm diggin' OS6!

  Thanks again!

• Windows did not accept the new updates and now still load with black screen and mouse rather than launch windows LOGIN

  
  

  Ideas: Troubleshooting/System Restore/Driver Updates

  • Troubleshooting took an installation point so-called drivers but never completed
  • System Restore worked initially but has now got to a point where he restores to where it will be updated and currently not load new windows
  • Recently replaced the hard drive in this laptop with a new copy of windows 7. Corresponding model
  • The only thing I have not tried is reinstalled, but then even if I did that would stop this from happening?

  ,

   
   
   
  First check to see if there are external devices attached to the computer, if so remove and check.
   
  Method 1.
  Let us run repair system at this stage, it might solve the problem.
  See the following articles for additional help and steps on startup repair.
  Startup Repair
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
  
  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
   
  Method 3.
  Step A.
  If the bows persists please verify if you are able to boot safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

   

  Step B.

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   
  Method 3.
  I recommend you to restore system using a Windows 7 DVD.

  Here's how:
  To open the Options menu system recovery using a system repair disc or a Windows 7 installation disc
  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows 7 installation disc or a system repair disc previously.
  To use this method, you need to restart (boot) your computer using the disk.
  a. Insert the disc.
  b. restart your computer using the power button on the computer.
  c. If prompted, press any key to start Windows from the installation disc.
  o If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
  d. choose your language settings, and then click Next.
  e. If you are using the Windows installation disc, click on repair your computer.
  f. Select the Windows installation you want to repair, and then click Next.
  g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
  
   
  If we are able to boot to the desktop now, I would ask you install the updates one by one andcheck the update is at the origin of the conflict.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows vista has been updated, and then just went to black screen and the kind of start to restart all.

  It just seems to be a loop.

  Hi Linda,.

  Thank you for your response.

  Here are some steps that you can try in order to solve the problem.

  I suggest you to change the startup command sequence and select the hard disk. Then, follow the steps provided by Abdul R and an update with the results.

  If you still get the same error message, disable the floppy in BIOS drive and check.

  You can see the manual of the system manufacturer or contact the system manufacturer for more information on how to make the changes in the BIOS.

  Note: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• I recently did an update of Windows on my laptop and now I get a black screen with cursor in the upper left, how to fix this?

  I can't believe that I trusted to Windows updates. Why what happened? I restarted my computer several times so try to press F8 and NOTHING. Microsoft pays for this correction? I seriously need to know what the * happens.

  Hello

  1. what happens when you tap F8?

  2. are you able to get the menu advanced startup options?

  Please follow the methods mentioned in the link below.

  Method 1:

  Try to start the computer in safe mode.

  Click on the link below.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to start in safe mode, please perform clean boot.

  Click on the link below.

  http://support.Microsoft.com/kb/929135

  NOTE: after the troubleshooting steps, please return the computer to start as usual (see STEP 7 the above link)

  Method 2:

  Try to perform the last good known Configuration using the link below.

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 3:

  Also unplug all third-party hardware devices connected to the computer except the keyboard and mouse.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  See also the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

• Top of the Tower stopped working, no reboot. Stop after BIOS and black screen then

  Data;
  Computer HP Pavilion dv9000

  MS Vista operating system

  Process;

  When I start the computer, it stops after the session of the BIOS and just give me a black screen empty, with a marker in the upper left conner.

  As I have no recovery CD, I can't do anything (software installed when I bougth the PC without any CD included).

  I have a good software entering (and identification number is located on the computer), but I can't find anywhere to download on a recovery disc (CD)?

  Very frustrating!

  Hello

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Get a black screen BIOS afer and before Windows logon

  So get a black screen after BIOS and before the Windows logon screen. I checked the RAM and one on two RAM sticks that was bad. But I still have the black screen. I tried an external monitor but still a black screen. I tried all the normal things (verification of the restore point disc, e.g. via the command prompt, startup repair, etc.) and no luck. I ran a test to check the hard drive, and it is impossible to find the hard drive. But then I ran AVG anti-virus, the AVG Live (bootable CD) and at the very start gave me this error: 106 error to the power of disk on life: 8768 (365 days + 8 hours) and underneath were basically the same error, just different numbers. But it still allowed me to run a scan and he was going through the files ok so she did not see the hard drive and files (contrary to the test of hard drive and yes the hard drive test was a bootable cd of same manf. like the hard drive), he found no virus. Even when I ran Defender in offline mode. Then I tried to re - install the operating system on the same drive with a cd. When he was going through the first part of the establishment where it was drivers and so forth: I kept getting the BSOD. Then I took the drive from the laptop and install it in another laptop but she has done the same thing, black screen, so I thought it was the hard drive. But then I begin another hard drive from the laptop and put it in the laptop original and he gave me the black screen and I know that the hard drive was good, she was an operating system that starts when I put it in the not troubled laptop. So any ideas anyone? Would it be possible that the all three things at once: RAM and hard drive laptop motherboard? Any help would be appreciated. Yet once, bios starts, just to Gets a black screen and does nothing after the bios but before the windows logon. The operating system is Vista and it is a Dell laptop, Studio. Any ideas?

  Thank you

  Don

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you do not get black screen.
  I imagine the inconvenience that you are experiencing. I will definitely help you with this.
   
  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:
   
  . Did you of recent changes made to your computer?
   
  Please follow the methods and mark the question below:
   
  Method 1:
   
  Follow the steps in the link below.
   
  What to do if Windows does not start correctly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
   
  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
  Warning: Before installation, you must be prepared for the worst scenarios that led to your existing data on your computer being removed. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other storage devices before performing a clean install.
  
  Method 2:
   
  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly:
  http://support.Microsoft.com/kb/958233
   
  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.
   
  Warning: Before installation, you must be prepared for the worst scenarios that led to your existing data on your computer being removed. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other storage devices before performing a clean install.
   
   
  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.