Plug for a 11.1.1.3 Server install issues.

Similar Questions

• vCenter Server install issues?

  We plan our migration of VI 3.5 to vSphere 4.  Our current vicenter server is running on Windows 2003 with a SQL 2000 database.

  I want to do the following and know if it is possible.

  1 virtualize our current viserver and wipe the hardware it is running on.

  2. install Windows 2008 R2 Enterprise x 64

  3. install Microsoft SQL Server 2005 x 64

  VCenter will work on Windows 2008 x 64?  I tried searching for this information, but for some reason any cannot arrive at this answer.

  Thank you

  Kris Turner

  Yes vCenter 4.0 is compatible with the 2008 x 64 according to the compatibility guide - http://www.vmware.com/pdf/vsphere4/r40/vsp_compatibility_matrix.pdf

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  Latest news of Apple posted, incredibly, ELSEWHERE other than on Apple own site Web/community technical forums.

  Apparently Apple has stopped now updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  Someone just posted in another thread that it may be active again. I can't check it, because they haven't posted a link about her being active again, and I've already updated all my devices, I can't be sure. Maybe something to watch.

• Need power plug for Satellite Pro A100

  Recently, I have lost the plug for my laptop and have looked everywhere but can't seem to find them so I was wondering if someone could help.
  I still have the box that plugs into the back of my laptop but I need real 3-pin plug that plugs into the wall.
  I don't know very much about computers so not quite sure which is the correct name for it but I tried Kettle plugs and they are a different form of the AC/DC adapter that I have.

  Hi mate,

  I know what the hell you mean, it s taking new adapters with the additional grounding of the wall adapter. These cards can be purchased by each service partner, I think Don t they cost a lot, so feel free to click on the link below and contact the nearest service partner in your country, because they will sell you a new:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871

  See you soon

• Unable to poll for new messages on your HTTP server. 0x800CCC33

  Outlook express 6.0 error message

  Unable to poll for new messages on your HTTP server.  Account: 'Hotmail', server: 'http://services.msn.com/svcs/hotmail/httpmail.asp', Protocol: HTTPMail, server response: 'Forbidden', Port: 0, secure (SSL): no, Server error: 998, Socket error: 122, error number: 0x800CCC33

  Please see similar to the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_programs/Outlook-Express-6/60f4d279-e92a-4590-9221-b160bfb3cf2f

• Emails from Outlook Express error: unable to poll for new messages on your HTTP server.

  When you set up Outlook Express and send/receive I get the following message: unable to poll for new messages on your HTTP server.  Account: 'Hotmail', server: 'http://services.msn.com/svcs/hotmail/httpmail.asp', Protocol: HTTPMail, server response: 'Forbidden', Port: 0, secure (SSL): no, Server error: 998, Socket error: 87, error number: 0x800CCC33.  How can I fix?

  How to add your Hotmail account to Microsoft Outlook Express
  http://windowslivehelp.com/solution.aspx?SolutionID=99d4b13d-13dB-40D8-9cdf-172002d4194c
  Hotmail and MSN accounts POP3/SMTP Access
  http://liveunplugged.spaces.live.com/blog/CNS! F92775FC46A390CA! 422.entry? a = 88094129

• Error "the message could not be sent. "The setting for your outgoing e-mail [SMTP] Server may need to be configured" in Windows Live Mail

  I use Windows Live Mail and it seems to me that they receive an email but I get the following messages and cannot send emails

  The message could not be sent. The setting for your outgoing e-mail [SMTP] Server may need to be configured. To find the server settings for * address email is removed from the privacy *', please contact your e-mail service provider.

  Object "Marriot coverage."
  Server error: 550
  Server response: 550 must be authenticated.
  Server: 'auth.smtp.1and1.co.uk '.
  Windows Live Mail error ID: 0x800CCC79
  Protocol: SMTP
  Port: 587
  Secure (SSL): Yes

  Can someone help me please

  JO

  Original title: Email problems

  Check with your e-mail provider on how the various SMTP (especially the port) settings must be set to confirm that everything is correct. But, take a look at this setting and try to change it if necessary to see if it helps.

  WLMail open

  Right-click on the name of the email account

  Click 'properties '.

  Click the [servers].

  "my server requires authentication" is checked?

  If it is not try to delay it and and see what happens then.

  Note that you may need to click the [Settings] button to enter the necessary info he needed.

• Error: you have an error in your SQL syntax; consult the manual for your version of the MySQL server for the right syntax to use near ')' at line 5

  Original title: how to solve this problem:

  System error

  You have an error in your SQL syntax; consult the manual for your version of the MySQL server for the right syntax to use near ')' at line 5

  Hi Roger,

  It seems that you have problems with the SQL syntax. The question you have posted is related to encoding and it would be better suited to the MSDN Community. Please report it in the community below.

  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/home

  Hope this is useful.

• Evaluation version for the cisco secure access control server

  Hello

  I can get the trial version for the cisco secure access control server. IF SO pls send me the link.

  Thank you

  Hi Thomas,

  You can download ACS for windows 4.1 or 4.2 from the link below:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-win-eval

  For ACS 5.x, please visit cisco.com

  Download software > Security > Cisco Secure Access Control System 5.x > Secure Access Control System Software

  HTH

  Kind regards

  Jousset

  Please evaluate the useful messages-

• Event ID 10016 - the application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  Lately, I'm getting this system error a lot now that I've upgraded to Windows 8 Pro is an event DistributedCom 10016 ID. Here is the text of the error:

  The application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

  the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.

  Anyone has an idea why I get this error?
  Walt

  Same thing here. Grayed. Windows 8.1 seems to fill the observer of events with many more errors than previous versions.

  Edit: OK, discovered why it is grayed out. There are 2 reg key, you must set permissions before going to the Configuration of DCOM in component services. The CLSID key and the APPID key.

  From another forum, although it applies to a different application, same principle:

  1. open Regedit.
  2. go in HKEY_Classes_Root\CLSID\ * CLSID *.
  Note: * CLSID * stand for the ID that appears in your event viewer error. In your case, it is {C2F03A33-21F5-47FA-B4BB-156362A2F239}.
  3. right-click on it and select authorization.
  4. click on Advance and change owner to administrator. Also click on the box that will appear below the threshold of owner.
  5. apply a full control.
  6. close the tab, then go to HKEY_LocalMachine\Software\Classes\AppID\ * APPID *.
  Note: * AppID * is the ID that appears in your event viewer. In your case, it is {316CDED5-E4AE-4B15-9113-7055D84DCC97}.
  7 right-click on it and select authorization.
  8. click on Advance and change the owner to administrators.
  9. click on the box that will appear below the line owner.
  10. click on apply and grant full control to the administrators.
  11. close all tabs and navigate to the administration tool.
  12. open component services.
  13. click on the computer, click my computer, and then click DCOM.
  14 find the corresponding service that appears on the display of the error.
  15. right-click on it, and then click Properties.
  16. click the Security tab, and then click Add a user. Add the SYSTEM and then apply.
  17. check enable local.

  Then use the relevant keys here and the DCOM Config utility should give you access greyed onareas:

  CLSID:
  
  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

• where is the plug for camera raw, Photoshop CS5?

  where is the plug for camera raw, Photoshop CS5?

  I can't view file on my Photoshop CS5 nikonnef

  updated ps cs5 for the latest compatible with it, cr http://www.adobe.com/downloads/updates/

  If you need a later version, you must upgrade your ps or use the dng converter.

  DNG converters:

  Win
  Mac

• Best practices for backup of a VM Web server?

  This question comes from another thread, that I created, but I figure I might as well start a thread fresh since it is his own question.

  Basically, I have an environment that I inherited when I started my new job within this environment, there is a lonely VM that runs from our Web server and was created using VMware player (will go to the workstation for the snapshot feature).

  I am extremely concerned by the fact that there is no backup strategy for it, so I'm interested in finding the best way to save this virtual machine.

  Being that it's a machine virtual I instantly thought, but of course I'm open to dictate what best practices.

  A lot of what I've read so far indicates to stop or suspend the virtual machine, then copy files, however is there a way to do that without temporarily take down my Web server?  It's just that we have customers in the world that has access to the server to different time zones and I want her to be in place 24/7.

  You'll have to stop the Virtual Machine and close VMware Player and uninstall VMware Player to install VMware Workstation and it is the time where you should make a backup copy of the master of the Virtual Machine.  Once installed VMware Workstation and the Virtual Machine is back and then runs to reduce the minimum time for subsequent backups you necessarily do not do such proposed by Richardson Porto although I don't disagree with what he says.

  In theory anyway, and in practice, when you want to backup you would take a cliché Hot and then copy the Parent disk such that it is now read-only and the Virtual Machine is still running while you make a copy of the Parent disk.  Once you have copied the Parent disk, you can then remove the snapshot thus merging Delta and drive Parent and now ready for the next time you want to back up the drive.  The duration of that Virtual Machine is interrupted during the snapshot warm and hot snapshot delete should be considerably less and then stop and restart the virtual machine.  The reason why I said "in theory" because while it is supposed to work in practice, nevertheless if you correctly shutdown the guest operating system before capture instant, so you do not rely on VMware Workstation to make sure that everything works all in being hot.  Not that you should have problems, it's hot, however you remove a layer of the process that has the potential of being wrong compared to when is cold, even if it is cold takes a little longer.

  In both cases, I would avoid cloning because it changes the UUID and MAC address of the clone of the parent company and by creating a second occurrence technically need a second license for the Windows operating system that is installed on the cloned virtual machine.  In other words an archived copy complete or exact unedited from the original is a legitimate backup a clone of IMO is a second occurrence but it has a different UUID and MAC address.  It would be like taking a copy of the operating system with a single license and install on two different physical computers.  Also by doing as I have suggested and make a backup copy of Master of the Virtual Machine and then just save the Parent read-only disks disk hard virtual are themselves not a computer virtual and just that copy a backup, however can be used to restore the same Virtual Machine driven and not having not any changes in the UUID MAC addresses etc.

  Finally, you should look into what you are running in the guest operating system and how to properly save Web Site and database, or user data etc in the guest operating system.  In other words, you should always have a copy backup of the virtual machine and everything that is necessary in the guest operating system to be able to restore it without necessarily restore all of the Virtual Machine.  IMO it's better to have several and backup types to have more options in a recovery scenario!

• Why do I get a SQL syntax; consult the manual for your version of the MySQL server for the proper syntax

  I have a purchase order where my buyers can add to my form. I use a loop that adds an extra line when they add a new product. I'm storing the information in two tables different mySQL. The first is alll of my personal, the second is the elements. My personal records correctly. However, I get the following error when you save the items:

  You have an error in your SQL syntax; consult the manual for your version of the MySQL server for the right syntax to use near 1, 'wer 2345', 1, 1)' on line 9

  The error occurred in E:\webs\clarkwebhosting.com\SSL\esrc\order_add.cfm on line 74

  ++ After storage of the personal information, I take the command ID to populate the table of Articles

  < cflock timeout = "5" >

  < name cfquery = "qGetorderID" datasource = "#application.dsn #" >

  Select max (orderID) as oid of orders

  < / cfquery >

  < / cflock >

  < cfoutput > < cfset getoid = #qGetorderID.oid # > < / cfoutput >

  ++ Is the loop that I use to fill the table items ++

  < cfloop to = "#form.numba # '1' = ' index 'idx' = >"

  < cfset getqty = evaluate ("form.qty" & idx) >

  < cfset getitem = evaluate ("form.item" & idx) >

  < cfset getunit = evaluate ("form.unit" & idx) >

  < cfset gettotal = evaluate ("form.total" & idx) >

  < name cfquery = "insertItems" datasource = "#application.dsn #" >

  INSERT in Articles

  (orderID,

  quantity,

  agenda,

  Unit,

  total

  )

  VALUES)

  < cfqueryparam value = "" #getoid # "CFSQLType ="CF_SQL_INTEGER">"

  < cfqueryparam value = "" #getqty # "CFSQLType ="CF_SQL_INTEGER">,"

  < cfqueryparam value = "" #getitem # "CFSQLType ="CF_SQL_VARCHAR">,"

  < cfqueryparam value = "" #getunit # "CFSQLType ="CF_SQL_INTEGER">,"

  < cfqueryparam value = "" #gettotal # "CFSQLType ="CF_SQL_INTEGER">"

  )

  < / cfquery >

  < / cfloop >

  This line: 1, 'wer' 2345, 1, 1 is the first element of the command line. Any ideas as to why it doesn't work? I use 5.5.9 - log CF9 and mySQL

  My apologies... that should have been (note the quotes)...

  In addition, it would be...

  On another note... You should probably avoid using cfinput and simply use the standard form tags.

• For applications, hosted on a private server, users have to reinstall the application to see the updates to the App Builder?

  For applications, hosted on a private server, users have to reinstall the application to see the updates to the App Builder? Let's say that I was updating a banner of right or a library style...

  If you change the .zip offline banner or a library style that is part of a .zip file that you specify in DPS App Builder, then Yes, you must change the app and make it available for users to update. But if you change the style of banner or library that is hosted on a server, the changes appear immediately without any modification to the application.

• You can run several APEX headphones for different instances on the same server

  Please confirm that we can run several APEX headphones for different instances on the same server?  It is a configuration of xml configuration or do we need to do more?

  
  

  Thank you

  
  

  Tony Miller

  SmartDog Services

  Austin, TX
  

  Hello

  With last listener APEX, you can configure multiple databases

  Oracle Application Express listener configuration

  Is that what you mean?

  Kind regards
  Jari