Plug in microphone is very soft, there is no icon in 'line' or select to change audio levels.

Hello
I have a microphone plug that goes directly into my microphone jack. The microphone DOES not work, but it is almost silent and people can barely hear me.
The only microphones that appear in the control panel-> Sound are my fault, and there is no icon in 'line' or whatever it is to recognize the microphone so I can change its sound levels. This certainly isn't a problem of pilot mine are all so far and the helmet is not a usb plugin. Disabled and disconnected devices are all displayed.

Thank you.

Hello

Thank you fo contact Microsoft Answers.

Try to reinstall the drivers. If this fails, try updating the driver software.

Response if the issue is not resolved.

Tags: Windows

Similar Questions

  • I have a MacBook Pro (mid-2012) with the audio jack single. Why not recognize it when I plug a microphone inside?

    I have a MacBook Pro (mid-2012) with the audio jack single. Why not recognize it when I plug a microphone inside?

    I use a splitter cable, and have verified meter that it is properly connected.  Also the microphone that I try to use the works when connected to a separate Recorder device, so I know who works very well.

    The audio output on a 2012 port does not support the audio input.  You will need to use the USB ports for audio input.  This will require an appropriate hardware and software.

    Ciao.

  • Very soft micro after installing Windows 7

    Hello

    I have recently upgraded to Windows 7 and was unaware of any problem with the sound on my laptop when running on OS Vista professional. I now use Windows 7 Home edition, and that's when I noticed that my microphone has become very soft. When you try to Skype or record sounds, nothing is saved. I get comments if I push the mic, but not much else unless I shout at point-blank range. The drivers are up to date; I have already run the troubleshooting and no problems were found. No error messages or audio playback problems, just the microphone. I use a built-in microphone (the web cam next to it also works very well) and I have a Toshiba Satellite.

    I noticed that other people have had the same problems, this could be a bug on windows 7?

    Hello

    I suggest you follow the methods and check them off below.
    Method 1: Increase the volume level
    1. click on start
    2. tap sound in the start search box
    3. Select the sound.
    4. Select the recording tab
    5. Select microphone
    6. Select Properties
    7. under properties of the microphone, select listen.
    8. increase the volume level.
     
    Method 2: Uninstall and reinstall the sound drivers.
    1. click the Start button, select Control Panel, click System and Maintenance, and then click Device Manager.
    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. in the list, look for the audio device, right-click the device, and then click Properties.
    3. click Driver tab and click on uninstall, and then click OK.
    4 restart the computer.
    5. now download and install audio drivers from the manufacturers Web site.
     
    See also: http://social.answers.microsoft.com/Forums/en-US/w7music/thread/5f0378ef-0351-49de-9f47-710ac7f17a09
     
    Thank you, and in what concerns:
    Swati Keni-Microsoft Support

  • Satellite T130 stll speaker very soft

    Hello

    On my satellite T130 (Win 7 64) the sound always very very soft
    You have an idea to solve this problem?

    Thank you to

    Are you really sure that this is a problem?
    What kind of sound you want to have on this ultraportable?

    This is the new model of laptop computer designed for more comfortable use and mobility (slightly and pretty slim 22 mm).
    I've read a few articles online and nowhere is mentioned as multimedia laptop designed to optimize audio performance.

  • Satellite P300 - 1 9 - microphone is very poor when using camera

    I have a problem with the microphone level when I use the laptop and the skype.system.

    The person who receives the call from Skype cannot hear the low sound recorded using laptop computer.
    However, if a microphone is plugged into the laptop then the sound is perfect.

    Anyone have the same problem or knows how to fix...

    Hello!

    Have you checked all the sound settings? I think that the microphone level is not set to high volume.
    AFAIK in Skype, you can also change the volume of the microphone.

    Maybe you need to upgrade the driver sound and webcam.
    Audio driver and the webcam software is required to use the internal microphone, because the internal MIC is only available with the internal webcam.

    Good bye

  • When I plug my IPOD to the computer, there is no indication of a detected device or in ITunes there is no "peripheral" in the sidebar.

    Original title: IPOD

    When I plug my IPOD to the computer, there is no indication of a detected device or in ITunes there is no "peripheral" in the sidebar.

    Any ideas?

    Hello

    1. were you able to use the IPod even without any problem before?
    2 have you made changes on the computer before this problem?
    3 have you tried plugging it into different USB ports and check?
    4. are you able to use other USB devices on the computer?
    5. have you try to use the IPod even on check and another computer?
    6. what operating system do you use?

    Answering these questions could help us help you better.

    Run the following article fixit tool and check.
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/

  • Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone?

    Webcam with integrated microphone.

    Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone? more details on settings please

    to check your setting first:

    Right click the speaker icon in the notification area and choose: Adjust Audio properties.

    Or: Control Panel, sounds and Audio devices.

    Volume tab: click Advanced under Speaker settings and open the drop-down list for the speaker setup and choose your speakers, click on apply.

    Click the performance tab and move the sliders to the complete and best, click OK.

    According to the Volume of the device, click Advanced.

    On the page of the Volume control, click Options in the menu, click Properties.

    Mixing should be your system and not one of your pickups.

    With reading selected all the check boxes.

    Click record, peripheral mixing system, check all the boxes.

    Click play again, and then click OK.

    Volume control, "as you like it".

    Vague, put the max slider.

    All others are ok in the middle.

    Close the Volume control.

    Now we will install your micro Genius:

    Click on the Audio tab:

    Audio playback: System.

    Sound recording: click the menu drop down and choose your Genius mic, click on apply.

    Click the voice tab:

    Reading of the voice commands: System.

    Voice recording: click the menu drop down and choose your Genius mic, click on apply, click OK

    When you want to use your Web Cam microphone, you will need to go back and select again instead of your micro Genius.

  • Touch screen, keyboard clicks suddenly went very soft

    I have this strange new problem in my 5130 DVP. I used to have a pretty strong STROKE keyboard clicks as I type. All of a sudden this afternoon, keyboard clicks went very soft as I type. Y at - it an adjustment to increase the volume of clicks back to normal? Thank you

    By any chance, did you recently applied Windows 8.1 1 update recently? Microsoft has decided to lower the volume of the keyboard with her, apparently after receiving requests to do so, of course, many now want it back to what it was before (or Hey, even better: a low-medium-high option!).

  • Microphone does not work when the headset is connected (Windows 7 with Realtek HD Audio).

    I am a user in advance, but this got to be one of the funniest problems ever. First, I had 2 headphones with microphone.

    1. An old helmet specified with microphone
    2. A new headphones A4Tech HS-100 with microphone that I just bought
    Problem:
    • Using the new helmet I bought, when I plug the microphone (pink jack even) it works, but also when I plug in the headphones (same headphone jack), the microphone no longer works (cannot receive all the sounds, even if it is detected clear as already plugged) and only the work of helmet.
    The most funny thing is:
    • The old headset works fine when I plug the microphone (jack Pink) and headphones (headphones) to my ASUS N81V laptop.
    • When I plug the microphone on my laptop and plug the headphones to my iphone, the microphone and the headphones work!
    • To experiment more, my laptop has a HDMI output connected to an external HDMI monitor, when I connect the microphone on my laptop, only it works, but as soon as I connect the headphones to the headphone jack on the external HDMI monitor, the microphone works again!
    Things, I tried and does not work:
    • Maximize the microphone amp
    • Separate entry made in the audio Panel
    • Ensure the microphone is not dumb anywhere
    • Install the latest drivers from the manufacturer and realtek Web sites
    I want to get both my mic and headphones works when plugged the laptop, what exactly is the problem? Any help? Thank you very much.

    I have a similar problem with my netbook a built-in microphone running Windows Starter, that's how mine to get the fix:

    Control Panel - his - recording tab - click on Configure button - set up micro - Configuration of the Microphone Wizard.

    You'll see three choices 1. Headphones Microphone 2. Table microphone 3. Others.

    All what I have to do to fix my netbook is to select the desktop instead of headphones with Microphone Microphone (it has been revived somehow).

  • In the forum Coursera pages there are different icons and buttons, but I see that only holders of palce, small squares with letters in there. Any help?

    In the pages of the coursera.org forum, there are different icons and buttons. They do not display correctly. I can see only tiny forms square with characters in them. Hovering on them can display information in some cases, but it is not very convenient. Although they recommend Firefox, I use Chrome instead. Chrome has no questions here so far. Is it possible to view these icons correctly?

    Many sites now use downloadable fonts to create their icons instead of the traditional image files. So, there are some Firefox settings that might be a factor, as well as the NoScript extension, if you use this (blocked objects).

    (1) in the dialog box fonts Advanced, unchecking the checkbox which allows the site to use its own choice of fonts. To check that:

    "3-bar" menu button (or tools) > Options > content > button "Advanced".

    Here you must "allow pages to choose their own fonts.

    (2) on the deactivation of fonts downloaded in: config. It's less likely, or you remember probably not, but here's how to check on it.

    • In a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
    • In the search box at the top of the list, type or paste the gfx and make a pause so that the list is filtered
    • If gfx.downloadable_fonts.enabled preference is bold and user, set false, double-click it to return it true.

    This seems useful.

  • Error message comes up saying ' there is a problem resetting your PC has not changed. "

    Original title: reinstalling Windows

    My laptop (Dell Inspiron) comes preinstalled with Windows 8, but not working now - it runs very slowly and often takes multiple attempts to turn on. Often said 'Prepare auto repair' when I turn it on, it remains just on this message.

    It's less than 3 years old (out of warranty) so I think that it's a software problem and not material.

    I tried to do a factory reset to clear the laptop, but an error message comes up saying ' there is a problem resetting your PC has not changed. "

    I then tried to create an installation of windows on a USB media using my product key, but impossible to use my product key for retail sales.

    I am now at a loss of what to do that my laptop is pretty useless as it is.

    It's a hard drive to a failing hard drive error / failed.

    It's a DELL error code, not a Microsoft error code

    http://en.community.Dell.com/support-forums/desktop/f/3514/t/19533510

    Replace the hard drive or ask in the Dell Forums.

  • I want to pair a speaker, but there is no icon of Bluetooth devices in Control Panel

    I want to pair a speaker, but there is no icon of Bluetooth devices in Control Panel

    Hello

    1. which version of the service pack is installed on your computer?

    2. don't you make changes to the computer until the problem occurred?

    Method 1: Check the status of the Bluetooth support service:

    a. to open the snap Microsoft Management Console (MMC) for Services in Windows XP, click Start, click Run, type services.msc and click OK.

    b. double-click the Bluetooth Support service.

    c. If the Bluetooth Support service is stopped, click Start.

    d. in the startup type list, click Automatic.

    e. click the log.

    f. click Local System account.

    g. click OK.

    h. If you are prompted to restart the computer, click Yes.

    Method 2: Check the settings below:

    a. right click on the Bluetooth in the notification area icon and then click on view the Bluetooth settings.

    b. on the Options tab, click to select the discovery of the Tower on the checkbox and then click on apply.

    c. to enable Bluetooth devices to connect to your computer, click to select allow them Bluetooth devices to connect to this computer check box and then click OK.

    Method 3: If it's Windows XP Service Pack 2 then I suggest you to see link below and check if it helps.

    How to troubleshoot Bluetooth detection and connectivity problems in Windows XP Service Pack 2: http://support.microsoft.com/kb/883258

    For your reference: How to install and configure Bluetooth devices in Windows XP Service Pack 2: http://support.microsoft.com/kb/883259

    Hope this information is useful.

  • There are 2 icons of Google Chrome on my Start menu. '

    There are two icons Google Chrome on my Start menu. I have them put there... One is labeled "Google Chrome Basics". That's the one that I have no place there, and I don't know who did. It is important to keep - in addition to my normal installation of Chrome - why can't these two programs be "merged" as I suspect they are anyway? Chrome doesn't "fully self-contained" is?   Thank you.   R. Knerr * address email is removed from the privacy *.

    Hello

    You must check with their forums and Google Chrome support.

    Support for Google Chrome
    http://www.Google.com/support/chrome/

    Google Chrome forums
    http://www.Google.com/support/forum/p/chrome?hl=en&utm_source=HC&utm_medium=LeftNav&utm_campaign=chrome

    Hope this helps and happy holidays.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How can I remove USB drive safely when there is no icon 'remove hardware safely '?

    Re HP Pavillion Notebook PC, Windows 8, 64-bit g7.   I want to be able to remove a USB without shutting down the computer.  There is no icon for "Remove hardware" as on other computers I have.  I was not able to find the program or its icon by using the 'search' or 'Find'  It is not indexed in the user guide.  Suggestions?

    Use the method presented in the video.

  • In Win7, there is an icon that can be created that minimizes all open windows and displays my office?

    There is an icon that has been installed on my system win XP that allow me to view my desktop when I had other windows open.

    I'm looking for something like this for Win 7.   I'd appreciate any help you can offer.

    Thank you

    G

    The icon Show Desktop XP has been moved to the lower right-hand side of your screen (to the right of the clock in the system tray). You can go over it to get a quick overview or click to minimize all application windows.

    Edit: adds the following reference, article

    The new taskbar of Windows 7

Maybe you are looking for

  • Satellite L500 - 13D - from Vista to Win7 - HOW?

    I bought yesterday laptop (Satellite L500 - 13D).I installed Vista 64 bit and I want to upgrade to Windows 7, because it is no longer compatiblewith all the other programs on my old PC (I used XP). Do I need special drivers for this and where can I g

  • VPN connection to the remote desktop

    My company has recently introduced a new VPN system for remote access to the desktop. The old VPN worked well with my computer at home. Now I thought that "Critical Patch KB2115168 must be installed" in order to connect remotely. Many other patches w

  • Rightsizing storage error

    Hello I tried to test the resizer disc automated in my environment - in this case reducing disk allocation according to the recommendations. Foglight attempts to do - stop candidtate VM in Virtual Center, reconfigure VM, start. In VC, it generates an

  • Product key for computer window 7 Alienware 2010

    someone tell me how can I activate my Windows 7 alienware I tried a product key for this window, but this is not accepted by the window... can someone give me the correct product key of window...

  • Why illustrator do not start?

    Since yesterday, after an upgrade to Windows 10, Illustrator will not start. The start screen appears and after a few seconds it crashes. I uninstalled the program and re-installed. No difference in behavior at all. Why won't start Illustrator, and h