Very soft micro after installing Windows 7

Similar Questions

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• After installing Windows Vista, upgrades of office is now only 2 thirds of the screen, with one third black.

  Original title: April 16 to restart my computer after installing Windows Vista upgrades, my office is now only 2 thirds of the screen, with the third other black

  The whole office is there, but it is located in the Center, if the screen, with black bands at the top and bottom. By clicking full screen on the top right has no effect.

  Hi Jeremy,.

  Thanks a lot for your help. You're right, I should have said no upgrades and updates.
  There were a total of 10 updates:
  4 a security updates for Vista,
  1 security update for the Microsoft 2010 information access path,
  1 day of cumulative security for IE9.
  1 windows Live essential 2011
  1 definition update Windows Defender (KB915597)
  1 "" for Office 2010 "
  1 April 2013 malware tool
  I uninstalled Windows Live Essentials. I felt that I should not uninstall the updates of security, and the Defender update can not be uninstalled. It made no difference.
  I also checked the graphics card and told me that I had the latest version of the software.
  Then I checked the configuration of the monitor and graphics card configuration and found I could set the configuration to full frame. I did it and now all is well again.
  How and why the full frame disappeared April 16 remains a mystery.
  Thank you very much for your information without your help I would have been unable to delve deeply into the system. I learned a lot.

• SD card is not working properly after installing windows 10

  I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

  Hello LorinMax,

  Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

  If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

  1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

  Boot Camp Installation & Setup Guide

  Backup of your Mac hard drive

  OS X: on OS X Recovery

  See you soon!

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

• HP pavilion zv5000: missing zv5000 system drivers of base after installing windows 7

  After installing windows 7 displays device management point exclaimation

  Hardware ID:

  PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C & REV_01
  PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C
  PCI\VEN_104C & DEV_8201 & CC_088000
  PCI\VEN_104C & DEV_8201 & CC_0880

  Also CD-ROM/DVD-rom won't recognize my cd/DVD, but Device Manager shows the work of the unit.

  Need help

  Hello:

  You can use the driver card reader XP support for your laptop and driver page.

  There is no vista or W7 driver for this card reader.

  If auto installation does not work, manually install the driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-29677-1 & CC = US & DLC = in & LC = on & os = 228 & Product = 385148 & sw_lang =

• Computer OS used to start after installing windows 10

  Hello im having problem starting my system after installing windows 10. I did the install and it worked fine since the upgrade to 8.1. But then I tried to format the drive and in the menu format, he's stuck at 2%, and then I restarted the computer. Now it will hang at the hp logo and go back to the same logo. Do I have to replace my hard drive?

  What I understand, if you have completed the 10 Windows Installer and everything has happened until the end, then you are supposed to be able to do a clean install with the download of Windows 10 DVD or USB.  With a working computer, GO to THIS PAGEand scroll down to the button "download tool" selection the 64-bit version.  Once clicked, it will ask you if you want a DVD or USB for the iso.

  Once it's done and you have the DVD or the USB version, see if you can install Windows 10.  If this fails, you may need to replace the hard drive.

• No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home

  No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home. Any suggestions on how to solve the problem?

  Thank you. This site help me solve my problem.

  http://www.Realtek.com.tw/downloads/ExpressFTPSite.aspx?DownTypeID=3 & DownID = 558 & PFid = 23 & Conn = 3

• HP Officejet 7612: analysis of problems after installing Windows 10

  After installing Windows (prior to Windows Vista) 10, scan documents with my HP Officejet 7612 became a hell of a job.

  Printing is no problem.

  With Webscan, I can only scan and save 1 page at a time, I can not scan several pages of the document 1 more.

  I downloaded "Extended Scan" but when I try to use this app, it says "year error occurred while scanning" without more information.

  With "HP Scan and capture" I can't scan the size of A3 paper full of documents and there seems to be no possibility to change the size of a3 paper. Maximum size is 'legal letter '.

  Same problem with "Windows Fax and scan."

  Are there other ways to recover the possibilities of full scan from my HP Officejet 7612?

  Hello
  
  Thank you for using the HP Forums.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps.

• Disc Association file missing after installing windows 7 SP1,.

  After installing windows 7 SP1, trying to open the drives C, D, F, I get error message cannot open, lack assocition file, can someone tell me how to solve this

  Restore the Type Associations by default Windows 7 file Extension:
  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Change the programs that Windows uses by default:
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How can I do I check Windows Update after installing Windows 7 if my internet interface does not work?

  My only internet connection is done by an AT & T USB Connect 881U (mfg Serra wireless). Windows 7 update Advisor indicates that

  I need to check Windows Update after installing Windows 7 to make sure that I have the latest driver for this device, otherwise it can not work.
  If this does not work I have no way of checking Windows Update. Any suggestions of how I could get out of this situation if it happens.

  When all else fails RTFM:

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 0 x 80244004 error after installing Windows Update Agent 7.6.7600.256

  After installing Windows Update Agent 7.6.7600.256 22/06/2012, I no longer see the Windows Update page when I run Windows xp and get this error 0 x 80244004, any response?

  Hello

  I saw an answer posted by (DevekY) and it's here:

  (Go to Advanced Setup ESET
  Web and email-> Web access and anti-phishing protection-> HTTP, HTTPS
  Installation scanner HTTPS-> HTTPS filtering mode

  Select "do not use HTTPS protocol control")

  I did this and solved my problem (have no more error 0 x 80244004)

  But what do you think? My computer will not be endangered?

  Thanks a lot for your time to help me.

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• After installing windows XP sp3 do not work my motherboard drivers intel

  After installing windows XP sp3 my motherboard drivers intel do not work. My mother board D845 GLAD. What could be the problim?

  Try reinstalling the drivers for your motherboard chipset, you can check this link to download the chipset driver:http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%c2%ae+845+Chipset+Family+Boards&ProductProduct=Intel%c2%ae+Desktop+Board+D845GLAD

  Also, try to download the drivers from your computer manufacturer site... Their number is 800-936-5700, and they are open Monday - Friday, 05:00-21:00 Pacific, Saturday & Sunday, 06:00 - 15:00 PST. XD

• No sound after installing windows on my hp 620 help 8

  No sound after installing windows on my hp 620 help 8

  I can't find your audio driver on the HP support page, but I was able to locate it, which is the same engine as yours, just the latest version. According to what is listed, it supports Windows 8. Give it a shot and let me know if it works for you.

  http://goo.GL/0IMBd