Similar Questions

• I get an error by cancelling the registration of the OCX C:\ProgramFiles\LizardTech\LizardTechDjVu Controll\DjVuCntl.dll

  I get an error by cancelling the registration of the OCX C:\ProgramFiles\LizardTech\LizardTechDjVu Controll\DjVuCntl.dll

  More comments from Gokul, I suggest that you contact the Lizard Tech support listed below:
  http://www.LIZARDTECH.com/support/

  You can also post your question in the community forums of Lizard Tech.
  http://www.LIZARDTECH.com/forums/

  I hope this helps.

  Marilyn

• Cancel the registration of events does not not to change value

  Cancel the registration of events does not seem to prevent the change in value of firing event.

  I've attached an example of change that disables the mouse enter and exit events to include the value Change event.

  Document ID 4ATCBP1U

  http://digital.NI.com/public.nsf/allkb/E3E5E1B3021D8EFA8625730A0062F52D

  You use the standard event, not the dynamic one (note that the Boolean value does not have the <> ).

• secondary ACS 5.1 fails to cancel the registration, after IP change on primary

  IP address of primary education had to be modified, in response to a hardware failure of the RADIUS server with the intellectual property in several configs device.

  Now school is unresponsive to repeated requests "Cancel registration of the primary", even after reloading.

  apparently because he can't reach the primary to the old IP address.

  Asking to cancel the registration in the GUI generates pop-up that says: "this operation will remove this Instance ACS of the primary Instance.

  On this instance of the CSA management applications will be restarted and you will need to identify yourself again.  After you perform this operation

  Please wait five minutes for this restart complete.

  Do you want to continue? »      [OK]

  But checking back after 10 minutes - or even the next day - find status of secondary education unchanged.

  Also tried in Local Mode, cancel the registration of the primary;  This operation also fails.

  Does anyone have the URL HOWTO on a total reconstruction of the application of GBA?

  The two ACS are PCA-1121-K9 5.1.0.44.4 running.

  Thanks in advance for any help...

  UPDATE: *.

  Command, has recommended "application reset-config acs", has been _exactly_ what was needed.

  jrabinow - thanks a lot!    :-)

  also, thanks for mentioning that the licence would be required, so that I could locate in advance and have it ready.

  Since there is no local CERT on the server, we should not re - install those.

  Since it is a secondary antibody that it should not have too much in terms of specific configuration

  Therefore, one possibility is to reset the configuration, so once more, it becomes just a stand-alone node and then that to the deployment as it is for any new node and as you saved it until

  Reset configuration can be done using the following command in the CLI:

  rebate to zero-config CSA

  Note that after resetting the configuration you will need to reinstall the license so make sure that you have it handy

  So if you installed a certificate server to the secondary server, you have that too

• My computer crashed while I was able to cancel the registration of my copy of Windows 7. I would like to move to my laptop. What should I do for this (a number to call, etc.) Thank you!

  My computer crashed while I was able to cancel the registration of my copy of Windows 7. I would like to move to my laptop. What should I do for this (a number to call, etc.) Thank you!

  Jut a little word. If it is a retail version of Windows 7, you should be OK, but if it's a version of Windows 7 OEM then the license died when the machine does.

• Hi, I want to cancel my registration Adobe Muse and do not have the button to cancel, I'm the Ecuador, I want a number to call to my country.

  Hi, I want to cancel my registration Adobe Muse and do not have the button to cancel, I'm the Ecuador, I want a number to call to my country.

  Contact Contact for help to cancel your subscription.

  For more information, see cancel your creative cloud membership .

• O cancel the registration Suscripcion | Creating cloud como to hace cracias. I need a yuda.

  O cancel the registration Suscripcion | Creative cloud

  Look through the links below and use the option to chat if needed for your situation:

  Cancel your subscription or membership. Creative cloud

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  https://forums.Adobe.com/thread/1703848

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails try using another browser.

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_cancel-your-memb Governments

• I still want to cancel the registration of my series of acrobat 7

  I still want to cancel the registration of my series of acrobat 7

  Re: how to cancel registration of serial number Acrobat 7 >

  As mentioned in the thread above, the recording for CS2 and Acrobat 7 servers have been taken down, so it is not possible to activate legitimate software Acrobat 7.

  Kind regards

  Rave

• We have CS5 installed on a workstation, we registered with Adobe products.  We will be replacing to this workstation and resettlement CS5 on the new workstation.  I have to cancel the registration of the product in order to reinstall it on a n

  We have CS5 installed on a workstation, we registered with Adobe products.  We will be substitute in this workstation and resettlement CS5 on a new workstation.  What do I have to cancel the registration of the product to be able to install it on the new computer.  If so, how should I do this?

  Thank you

  You must disable (help > deactivate) installation on the old station.  then download and install on your new workstation using your serial number.  (that is to say, make sure you can find your serial number - if you need help with this, let us know.)

  Downloads available:

  • Suites and programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • Premiere Elements: 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 12 | 11, 10 | 9,8,7
  • Lightroom: 5 | 4 | 3
  • Captivate: 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Cannot cancel the plugin from the administration server deployment?

  Hi all
  
  When I was tring to cancel the deployment of plugin of 12 c cancel after the deployment of all the plugins to the agent, he failed and error: "Plugin sohudba.mysql.test:12.1.0.1.0 is deployed on 1 host, it cannot be cancelled. 12 c user interface, there is actually no any deployment on any agent.
  
  What should I do?
  
  
  Thank you
  Satine

  Have you tried to use the EMCLI tool? In one of your lines of command WHO, run emcli and search for undeploy_plugin_from_server

  Docs: http://docs.oracle.com/cd/E24628_01/em.121/e17786/cli_verb_ref.htm#sthref1388

  Have you looked at any of the points of view in SYSMAN over who would host the renegade? Check the GC$ CURRENT_DEPLOYED_PLUGIN for the guilty plugin :)

• I am deploying Firefox ESR and need to know if plugins read the registry can be activated by the force on all computers.

  I'm deploying Firefox ESR 31.X to all the computers in my company. We have plugins for security that I need to have forcibly running on each computer so that users cannot turn it off. The main example is McAfee SiteAdvisor. Firefox detects the plugin based on the HKLM\Software\MozillaPlugins registry key. The plugin provides a path to the location of the DLL in the McAfee program folder. Is it possible that I can put this plugin to always be activated?

  You can use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify new values (default).

  Put a local file - settings.js in the folder defaults\pref also the file prefs.js - channel where to specify using mozilla.cfg.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0);
  

  These functions can be used in the mozilla.cfg file:

  defaultPref();	// set new default value
  pref();		// set pref, allow changes in current session
  lockPref();	// lock pref, disallow changes
  

  See:

  • http://KB.mozillazine.org/Locking_preferences
  • http://Mike.kaply.com/2012/03/16/customizing-Firefox-AutoConfig-files/
  • http://Mike.kaply.com/2014/01/08/can-Firefox-do-this/

  You must set the pref (s) of plugin.state related to 2 always activate a plugin.

  • lockPref ("plugin.state.npmcffplg", 2);
  • plugin. State (0: never activate; 1: ask to activate; 2: always activate)

• Please cancel the payment I made there is little time - 60-90 minutes, and/or credit my credit card for the amount I paid. It's more trouble than it is worth. I have

  Simply cancel the payment I made on my Visa for registration and download. It's all about confusion. I'm in no condition to continue playing with this situation. Just cancel the payment or my credit card for the amount paid. $35 + I'll just just another browser.

  Marie Heckel

  Looks like you've been scammed. Firefox is a free browser that does not require nor payment or registration. Never download from anywhere but the official site:

  • http://www.Mozilla.org/

  Please report the offending on the following site:

  • http://www.Mozilla.org/en-us/legal/fraud-report/

  You will have to regularize the situation with the one who took your money, or failing that, with your bank or credit card company.

• How to cancel the option full page?

  I selected the option 'Full Page' from the view tab. However, in this mode, the standard toolbar is not available. How to cancel the selection of the entire page?

  Mode full screen can be displayed/hidden power with the F11 key.

  Also, when full screen, you can move the cursor to the top of the screen, toolbars will be drop-down, right-click on space empty on a toolbar and click on "exit full screen".

  lel48098:

  You need to update the following. The Plugin version (s) below has / have been submitted with your question and is obsolete. You need to update in order to avoid the known security issues with the version (s) you have installed. Click on 'more system info... '. "to the right of your question to see what was included with your question.

  • Shockwave Flash 10.2 r152
  • Next-generation Java plug-in 1.6.0_24 for Mozilla browsers
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
     • There are links to tests specific plugin available on this page:
       • http://KB.mozillazine.org/Testing_plugins
  2. Update the Flash plugin to the latest version.
     • Download and SAVE to your desktop, so you can find the Setup program later
     • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
     • Once the download is complete, exit Firefox
     • Click on the installer, you just download and install
       • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
     • Launch Firefox and recheck your version or up to the download link below to test the installation
     • Download and information: http://www.adobe.com/software/flash/about/
       • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
       • Use IE to go to the site above to update the ActiveX to IE
     • Download manual installers.
       • http://kb2.Adobe.com/CPS/191/tn_19166.html#main_ManualInstaller
       • Note the separate links for:
         • Plugin for Firefox and most other browsers
         • ActiveX for IE
  3. Update the Java plugin to the latest version.
     • Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java platform: download JRE)
       • Don't forget to uncheck the toolbar Yahoo option during installation if you do not want to install.
  
  
• See also "Manual Update" in this article for update from the Java Control Panel in Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
• Removal of older versions (if required): http://www.java.com/en/download/faq/remove_olderversions.xml
• Remove several extensions of Console Java (if necessary): _ http://kb.mozillazine.org/Firefox: _FAQs_:_Install_Java #Multiple_Java_Console_extensions
• Java test: http://www.java.com/en/download/help/testvm.xml

• Detection of change DAQmx - cancel the event error logging

  I am trying to use DAQmx for detection on some digital lines of changes. I think I installed everything in this article, but I always get error 'Error 1 has occurred to unregister events in the detection of change in Test - Error.vi Unregister'. When I change the structure to register for another event, not involving DAQmx but using the same structure, I get this error.

  I need this implementation on a code that runs for a very long time and according to the above article:

  "Use the Unregister function for events and function to destroy the user events to release the associated events and the reference of user event. LabVIEW unregisters all events and destroyed the existing user automatically events when the top-level VI end of execution. However, to conserve memory resources, National Instruments recommends that you unsubscribe and destroy the user events explicitly, especially in an application that is running for a long period of time. »

  Here are some screenshots of my comic, but also the .vi. Note that the detection of real change does not work well, it's just after I click on 'stop' I get the error generated by the "unregister to events.vi.

  

  

  Note When you transfer the .vi, I saw the issues described on this thread and had to change the name of the file...

  crossrulz wrote:

  You must cancel the registration of the event before deleting the task DAQmx.

  Delete the task implicitly cancels registration of events.  If you disable the task, rather than simply cancel, the event is already cancelled and you don't need two nodes.

  Or quite simply, the event is part of the job.  no tasks, no event and LabVIEW cleans the records for the non-existent event.  Other events that are not 'owned' by similar of e/s Sessions must use the unregister (as of the events of user)

• Cancel the MAPPING of Windows volumes?

  I don't know about scsi unmap command for vmfs recover space on a LUN EQ. Is there an equivalent for Windows data volumes connected via iscsi?

  Hello

  On Dell PS Series San, you must run EQL FW, 6.x or higher and the volume cannot be set up for EQL replication.  It is as well rep SYNC and async rep.

  Much depends on the version of Windows that you're talking about.  Windows 2008 R2 and do NOT naively support UNMAP.   It does support the SSD TRIM command.  However, if you install the printer Dell HIT / ME software he installs a driver to modify the order ADJUST order cancel the MAPPING on the fly to Dell PS volumes.   This applies to volumes that are DIRECTLY related to the EQL volume via the MS iSCSI host initiator.  A virtual machine on a VMFS partition is not supported by HIT / ME software.

  Windows 2K 8 and CSV de Hyper-V R2 volumes does not support UNMAP.  This is a MS issue, unrelated to the table.   Volumes Windows 2012 and R2 CSV can bear UNMAP only when you use virtual disks VHDX, if using the recovery of old VHD is not taken in charge.

  An additional advantage of HIT / ME in all cases taken in charge, is through the crib of Snapshot Auto GUI, you can force recovery anytime option.

  Note: If you are using snapshots, you can not immediately retrieve the expected amount of rear space.  The snapshot can always refer to this data, so until the snapshots that reference is deleted it will be allocated.

  Kind regards

  Don