Plugins and 3rd party sink with cloud

Similar Questions

• How Oracle Clusterware Oracle RAC and 3rd-party Clustering with them

  I have some questions on how Oracle, Oracle RAC and 3^rd party clustering CLusterware fit between them.

  Q1. My understanding is that the Infrastructure Grid Oracle Clusterware is Oracle's Clustering solution that allows applications to cluster? that is, it is a general clusterware solution to compete with those already on the market. Is this correct?

  Q2. So why CARS is necessary for the Oracle cluster databases? An Oracle database is not just considered one application like any other? So why can not just use you GI / Clusterware to gather what you would do for any other application? Why so you need RAC to the Clusterware Summit?

  Q3. Is it is possible to combine an Oracle database using 3^rd party of clustering and not use Oracle Clusterware and CARS at all that is can you say cluster, an Oracle database using say Sun Clusters, Clustering AIX or Linux native same clustering?

  Q4. If the RAC is purely for Oracle Cluster databases - what is with the title "Real Application Clusters"? What's real on this subject?, what to ask?

  Q5. I also read that RAC can use 3^rd party of clustering. However if you decide that this is the case, then you need to install Oracle Clusterware when even (I think for interconnection must be created to allow the merger with Cache between Instances of node?).

  Is this the case?  If yes why never bore you with 3^rd party clusters? -Since you will have to install Oracle Clustering anyway - and I probably have to license (all I can think about is the scenario that you already have a cluster of 3^rd party in place and you decide that you need to use the same material for a database cluster)?

  All wisdom greatly appreciated,

  Jim

  Yes, with 10g, you had to use the CRS, and with 11g, to use the GI.  For 9i RAC, you would use Verits Cluster and Sun Cluster or anything else.

  11g RAC to GI.  As above, you can use clusterware extra if needed.  I gave the example above where to a 10g RAC we used the CRS to the cluster database/listener/vip and allowing groups of volume and filesystem in HACMP cluster.  File systems were not shared, but could switch to another node failure node, who has been treated by HACMP.  The volume of the groups containing the raw devices were shared volume groups.  For 11g, I never used extra clusterware on top of CRS and have always used ASM which is part of the GI.

  The application provider only certified database to run on 10g on AIX with raw devices.  What is strange about that?  It would be unusual that you probably expect to use ASM instead of raw devices, but it is what it is.

  See the following Note of Oracle for more information: using Oracle Clusterware with vendor Clusterware FAQ (Doc ID 332257.1)

  It is perhaps easier to explain if you can explain what problem you are trying to solve?

• CineForm and other plugins 3rd party for creative cloud, what happened to them?

  Hi, I don't want to panic, but I just downloaded Adobe first CC and it tells me that I have made my previous project with a 3rd party plugin that is not available. What is the installation process of my plugins 3rd party for the first so I can edit with codecs, Blackmagic, Cineform and several others that I enjoyed helping the CS6.

  Hi scarolan, since you have answered Rallymax, it seems that you re-run Setup from Cineform.  If it seems so, at least in your case the Cineform Installer did not your new installation CC of the body.   It depends on third-party plug-in installer to find the correct folders, or to offer an option where the user can choose an installation path.

  Here are some of the paths for Agency CC:

  Common plugins: C:\Program Files\Adobe\Common\Plug-ins\7.0\MediaCore\

  The sequence presets: [Adobe Premiere Pro installation path] \Settings\SequencePresets\

  Preview of sequence presets: [Adobe Premiere Pro installation path] \Settings\EncoderPresets\SequencePreview\

  Common exporter presets: [User folder]\AppData\Roaming\Adobe\Common\AME\7.0\Presets\

  Effect presets: [Adobe Premiere Pro installation path] \Adobe Premiere Pro CC\Plug-ins\Common\

  Each plugin can have its own library dependencies (DLLs on Windows), license files, presets, etc.  If you are familiar with a certain set of plug-ins, you can try to copy on to CC CS6 files.  However, it is quite easy with sets of plug-in more complicated that you miss some files.  Even with all the files in place, whether or not the work of plug-ins like before depends on how everything connects under the hood.  It is like taking a part of your old model car and try to use it in a new model.  More integration, more something could have changed which requires a new "room".

  With all the foregoing said: the recommended way to install a set of plug-in for CC organization is re - run the last install plugin which must support CC.

• HotSync and 3rd Party apps

  This feels like a very basic question, but I do not know the answer.

  Computer is my computer 'primary', and that's where I'm updating all my Palm Desktop info.  B is my secondary computer, and that's where I install of 3rd party applications.

  When I run a Hotsync on comparison, it seems to run much faster than on CompB.  CompB seems to be updating many of the 3rd - party than comparable programs.

  This observation is correct?  If so, is there a way I can make sure that all my apps are updated when I run HotSync on computers?  Or is this a limitation of some applications that they can only be correctly updated from the computer on which they were installed?

  Thank you.

  It depends on what applications you use. Some third-party applications come with their own lines and these programs will synchronize only when lines are there. So, if the lines are only on the computer b which is the only computer that the program will synchronize with. If you want to be updated on both computers, you must have the program and the pipes installed on both computers.

  Message relates to: Centro (Sprint)

• (1) in windows 8 pro can I run windows defender and 3rd party antivirus [like Mcafee] at the same time?

  Today, I have improved my final from Windows 7 to Windows 8 pro.

  (1) is Windows Defender, it works both as the same as MacAfee antivirus software?

  (2) if I use windows defender in windows 8 pro, do you think that I still need 3rd party antivirus software to protect against viruses and malware?

  (3) can I activate and simultaneously run 3rd party software [McAfee] antivirus and windows Defender 8?

  (1) # Windows Defender is an anti-spyware, and Mcafee's anti-virus.

  (2) Yes

  (3) Yes

  UTC/GMT is 03:46 Sunday, October 28, 2012

• SQL Developer and 3rd party driver: JavaDB

  Come on the last 3rd party drivers for MySQL and & lt; Ugh & gt; MS Access & lt; / Ugh & gt; But what I'm looking for is a third-party driver for Apache_derby JAVADB. Anyone?
  Add manually the derby.jar in third-party drivers under preferences seems to do nothing in the GUI of SQL Developer.

  Adding the jar file updates the driver on the classpath, but you must establish a jdbc connection yourself for you connect to this.
  In 2.0, we offer generic JDBC connections available in 2009
  B

• Is a 3rd party compatible with Satellite P200-1EE cooling module

  Hi all

  The fan started making noise, a week after the warranty has ended, which means the replacement is necessary.

  Almost impossible to find the fan in the United Kingdom, however noticed that the fan Sunon GB0507PGV1-A my P200 is identical to that in the Acer Aspire 9300, with an identical configuration of heat sink. The differences are the slopes of Acer of 1.6 and P200 at 1.2W. I found the fan Sunon - available at the United Kingdom Acer but wanted to ask experts if it would work.

  So, what do you think?

  Thank you guys

  Hello

  The fan is not compatible with the Satellite P200.

  You must use a Toshiba fan. An ASP (authorized service provider) can help you to get a new.
  Here you will find an ASP:

  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Good luck

  Good bye

• Motorola Assist and 3rd party sms applications?

  Someone had some luck using third-party sms apps and Assist together?

  @MeganC1985

  I've seen users report that when they upgraded to the new Hangouts Google that assistance would not work either. So I don "t think this would work with any third-party SMS apps.

  I hope that bike will fix the problem of Hangouts as it seems when 4.4 is hangouts is the main messaging applications.

  I have a Nexus 5 it is why I know hangouts as the main email application.

  Thank you

  J

• Saving and loading of values on a 3rd party ownership of arbitrary data to the plugin?

  Here I am again, asking weird questions.

  I am trying to find a way that I can save and restore values/keyframes on a 3rd party property of the plugin.

  It's easy to do with standard property types as I can just get/set values, but with arbitrary data, I don't see a clear way to do this.

  I can make a preset effect which will restore the correct arbitrary values when applied and use ExecuteScript() to apply the preset.

  But, I prefer a method that does not need to apply a preset, because this solution would require the installation of a special it somethere preset in path predefined AE.

  It is the risk that the user could delete the preset, and then the plugin is broken.

  
  

  I thought that maybe I could trick the plugin from 3rd party to give me a copy of the flattened data of arbitrary property by sending PF_Cmd_ARBITRARY_CALLBACK, passes along a custom made PF_ArbParamsExtra with the which_function the PF_Arbitrary_COPY_FUNCvalue.  Now, I have a copy of arbitrary data.  I can use the same trick to get the flat size of data (PF_Arbitrary_FLAT_SIZE_FUNC), flatten the dataset (PF_Arbitrary_FLATTEN_FUNC), and then save the data flattened on the disk in a binary file.

  If it works, I would basically do the opposite to restore data from the disk and apply arbitrary to a new/different instance of will assume it.

  
  

  Typing all this, it sounds pretty crazy, and I barely understand the arbitrary data how works.  I'm not even sure I can do the above without things get messy.

  Any ideas on that?  I'm far from base? This is another technique that can do this with techniques less hacky?

  Thank you!

  -Andy

  your assumptions are correct.

  You cannot change add an effect to a layer while your effect is

  ground of appeal.

  It doesn't have the o effect with javascript. It's just, as you say,

  change the scene while working on it.

  How to work around this problem:

  have two plug-ins effect and a CEAP.

  result call the CEAP via a special series (see "order" and)

  samples of "honey" to see how it works) and set some data there.

  do not have the CEAP run changes immediately! store these data only!

  Let the effect finish its execution and return.

  now.

  during the call to idle_hook, the CEAP checks all messages left by the effect.

  new data is present? God. run now that the effect is not in call mi.

  TADA!

  with regard to the getPlatformData,.

  platform commands specific for data such as the path to self

  .dll, but you can just have the effect the data desired in the CEAP

  When it sends the message.

• Need to publish for a 3rd party host of Muse.

  I tried to post my Muse site for a 3rd party host with no luck. It seems that the 2 options that I have met so far that I can use Adobe accommodation or export to HTML format and then download via Dreamweaver (which no longer works). Does anyone know how to get around this problem so that I can use outside the accommodation?

  Thank you!!

  Hello

  The message indicates that you are trying to use the webforms in Muse widget and it seems that your host does not support PHP or PHP mail service.

  Please see the document: http://forums.adobe.com/docs/DOC-3581 and contact your hosting provider in this regard.

  Kind regards
  Sachin

• Calibration Toolkit with 3rd party ECU measurement and CAN interface

  I would use the NI ECU Measurement and Calibration Toolkit with an NI CAN interface.  The interface devices supporting J2534 are very common.  The NI ECU Meas and Cal Toolkit allow this? If so, how does one time on another interface CAN interface to the Toolbox?

  The NI ECU Measurement and Calibration Toolkit National Instruments Hardware only supports.

  If you want to discuss the possibility of using any 3rd party hardware, please contact your representative local.

• Problem with WLC and a 3rd-party NMS SNMP AP Assoc/cancellation interruption

  Hello

  I'm troubleshooting an issue, why our NMS is not able to automatically clear an alarm generated trap of an AP that has been separated and is associated with again.

  When debugging on the WLC snmp trap generation, I discovered that when the AP disassociates the WLC sends the trap of bsnAPDisassociated , which is perfectly defined and I can also find in the SNMP Object Navigator. However when the AP reassociates again the WLC sends the ciscoLwappApAssociatedtrap.

  Part 3 NMS is not able to understand it, but our WCS system does, that's why I then took a peek in the MIB file installed.

  I discovered that ciscoLwappApAssociated is a sheet of ciscoLwappApMIBNotifs (1.3.6.1.4.1.9.9.513.0. 4), which I have neither

  Cannot be found in the Cisco SNMP Object Navigator or the downloadable MIB.

  As the MIB in the WCS is a XML file I didn't how to get information in the 3rd-party NMS.

  Anyone have any idea on how to solve this problem or there at - it update CISCO-LWAPP-AP-MIB available somewhere?

  Our WLCs are running the latest version of the software (7.0.116.0) as well as our WCS (7.0.172.0)

  Thanks in advance!

  Kind regards

  Patrick

  Such discrepancies sometimes occur. Best is a matter of TAC in order to tackle the problem through a bug or have a new MIB published on cisco.com if necessary

• 3rd party Cookies will disappear with IE9 and Firefox 4? Impact on Marketing Automation?

  People, was curious to know how other people are considering (or have thoughts) all about losing third-party tracking with more recent browsers cookie?

  
  Looks like this could be very disruptive for all providers of marketing automation, or at least some sort of a switch to a party cookie should be first tracking system. If I read correctly, those systems it will be progressive, profiling, some stats CTR and certainly notification Web site visitor would be affected.
  
  More info here: http://paidcontent.org/article/419-mozilla-ceo-do-not-track-option-will-be-in-firefox-4/
  
  Thoughts?

  With the Firefox solution, we do nothing, since it requires their header and sites to work together. The challenge with Firefox and their solution is that the addition as a header-not-track, is that it requires browsers and sites to implement it to be fully effective. In other words, you can set the-no-track disengage all you like to feature in your Firefox browser, but if Web sites that track chooses to ignore the header-no-trail of Mozilla it will not do anything good. We are not ignoring the issue of Firefox, but believe that their solution is not one that will provide the appropriate consumer control.

  Regarding IE, they will be using a local list that the user must fill with sites that they do not want to be tracked on. There is not much we can do about that the consumer has the choice already today to block ALL cookies regardless of the type of part. This feature gives just more detailed control to the consumer at the level of the web address vs just block all third party cookies.

  We tested 'keep my Op-out Google' and it does not affect email and web click followed. It is only monitoring online ads.

  Finally, we are looking at or not stay with third-party cookie tracking or move to the first party. You can imagine my choice but there will be a huge change in how customers work must pass if we choose one over the other. More to come as soon as this.

  -Dennis

• 3rd party Plugins in Photoshop CC 2015

  Hello

  I wanted to know if the Plugins like Cup & cut my PNG Express or any other 3rd party plugins can be installed and if it is compatible with Photoshop CC 2015.

  The Extension handler code moved into the creative Cloud Desktop application.  There are the old managers of extension for the 'old' versions of Photoshop.  Adobe wants new modules to add their way through their web application Menu > help > Browse Add-ons. The creative Cloud Desktop application is also punished to run.  It's ridiculous he must condition thing way Adobe and wait for approval from Adobe for your add-on to be accepted and waiting for approval from Adobe for updates of your module.  Add-ons - may need to be updated when Adobe makes changes to Photoshop you'll need to do, then wait for Adobe to accept the update.

  There are third-party installers Photoshop Extension available on the web, you can download and use to try and install the old Photoshop CC 2015 extension extensions may not work with the changes that adobe has made to the CC 2015.  Compatibility issues are not rare. ZXPInstaller

  The good thing is that you can still add you own script and actions without having to wait on approval of Adobe.

• How to get the Media Player 12 to support id3v2.4 tags either directly or indirectly using a 3rd party plugin.

  original title: id3v2.4 MP3 tags

  Hello

  someone knows how to get Media Player 12 to support id3v2.4 tags, either directly, or indirectly using a 3rd party plugin. I use a program (Traktor Pro) which is a djing software. It reads my music library and writes specific tags such as BPM id3v2.4 format for MP3 files. After that, WMP cannot display MP3 tags because it seems that you can not read this latest version of id3 standard (which incidentally seems to be interrupted since 2000). End result is that any MP3 in the library seem to be corrupted / lack of tags in WMP12 after being accessed by Traktor Pro

  See you soon

  Shane

  Mr. Gonk,

  WMP and WE can read mp3 2.4 tags but can not write them.

  ERGO WMP works with 2.4 tags. So where is the problem?  Personally I use a 3rd party editor to write tags (more powerful and you can do more things).

  My 2 Euro cents

  See you soon,.

  Jerry