PnP

Similar Questions

• Problems with USB pnp devices series Tecra

  Hello
  I have a lot of problems to install usb flash drives as pnp devices. It should install automatically as it did on my desktop and other mobile colleagues.

  I am running xp professional and all that happens is the found new hardware wizard appears, and fails to install. I tried to update the BIOS and Chipset with downloads from this site but nothing works. I ran the diagnostics and the usb drivers and features are ok.

  Any help would be appreciated.

  Hello

  Everything you wrote is really mysterious. It will be interesting to know what model Tecra you have exactly, and this occurs when you install the operating system using recovery DVDs delivered.

  I can't really imagine that this issue occurred all of a sudden.

• Tecra A3: unknown device - PNP ID ACPI\TOS6209\2 & DABA3FF60

  Hello
  I have a Toshiba Tecra A3 with an unknown device with PNP ID ACPI\TOS6209\2 & DABA3FF60
  We're gone use Microsft BDD to deploy the client of the Organization so that we cannot use the recovery CD.

  I saw on another Tecra is something like logical Toshiba device

  fought for it in a couple of days.

  Does anyone know were to find the driver for it?

  Concerning

  Thomas Ahlstedt
  ---------------
  [email protected]

  I do not know what device might, but this Toshiba document should help you identify the unknown device in Device Manager.
  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  Then, you can visit the page of the Toshiba driver and download the necessary driver that is necessary for this device.

• Satellite M30x asking drivers to PnP Bios extension

  for some reason any crazy my satellite phone mx30 always ask PnP bios extension riders at startup. I searched all over for them but have empty cme. can anyone help?

  Hello

  What is new for me!
  Can I ask you if you use the image of Toshiba's own operating system?

  I put t know why this message, but it would be interesting to know if this message appears on the original Toshiba XP image.
  Maybe all the necessary drivers are not installed who knows.

  PS; Have you installed all the updates and fixes MS? Please check

• Satellite L650 - generic PnP monitor normal?

  Hi all...

  look at this photo in my computer, is it normal?
  [http://www.m5zn.com/uploads/2010/12/25/photo/1225102212204kcap6f72cqhwo4cr7f.jpg]

  I think its driver problome. Please help me.
  My laptop is satellite L650 psk1je

  Hey,.

  In the photo you posted, I see nothing of what is unusual, that everything is ok, and why the generic PnP monitor is not ok?

  My screen as a Plug & Play monitor and everything is ok with him.
  In addition there is no special driver for monitor.

  Then n t you worry about this, everything is ok.

• DisplayPort to DVI adapter is generic Non - PNP monitor

  I have a 6 week old want H8 - 1420 T C1U69AV #ABA, Windows 8 64 bit, 1 GB Radeon HD7670 and I am trying to connect two Dell 1905FP monitors. Each monitor works fine when it is connected to the DVI port. When I connect a monitor with an adapter HP DisplayPort / DVI dongle, the system reports it as a generic Non - PNP monitor and the screen remains black. I tried the adapter on another system, and it works fine.

  I've updated to the new '8.982.10.1800 Rev A January 3, 2013' driver on the HP site, but it did not help. The AMD drivers will not install because it is apparently a video of the ugly step-child card, not a true AMD. If I knew that I would have not purchased with the system.

  I have the original of the 1905FP CD when I bought it and it isn't a driver file on this subject (no need of one with XP). When the monitors work, they are each reported as a 1905FP.

  Someone at - it suggestions?

  Thanks for the suggestion, but this has been resolved over the weekend. I was using a passive adapter Displayport to DVI. I replaced it with a Startech DP2DVIS active adapter Displayport to DVI and that did the trick.

• I had problems with a PNP Dymo label printer on my Mac Book Pro it does not print, but I have my I Mac it works. Both systems are up to El captain

  I had problems using a Dymo Labelprinter PNP with my Mac Book Pro under OS X El Captain 10.11.2

  He moves on the labels, but not of printed letters. With the same operating system on my I Mac, it works perfectly!

  Strange!

  Have you tried to uninstall and reinstall the printer of labels?

• Monitor HP 650 G1 is generic list pnp - I need more resolution of 1366 x 768

  Hi Forum

  I discovered that my HP 650 G1 is exposed generic pnp.

  I need increase this to more than x 1024 768 x.

  This is because some site is displayed correctly if it is less than x 1024

  Help, please.

  Thank you

  Michael

  Hello

  The following PDF shows a few options for the display of the series (page #12):

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04126035.PDF

  Did you BUY the next option? You pay more to get it:

  15.6 "diagonal backlit by LED FHD glare SVA slim (1920 x 1080)

  Kind regards.

• Resolution of Windows Server R2 2012 stuck at 1024 x 768 generic Non - PnP

  Hello

  I want to have my own windows home server, so I installed WindowsServer 2012 R2 on a laptop Aspire 7740. But the laptop does not screen because I don't need, I want to order the server remotely via VNC. The problem I have with the server, it's that I can't increase the resolution, so if I use VNC only 1/4 of my remote screen is filled with the desktop of the server due to the fact that my remote screen resolution 1920 x 1080.

  Is it possible to increase the resolution of a generic Non - PnP monitor? (I tried to install the drivers from w8.1 but it did not work)

  Greetings

  healing

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Generic Non - Pnp Moniter Fix?

  Today I turned on my computer and the resolution is really too big, I went to the resolution of the screen and discovered that the resolution, it was fixed to the Max. So I searched the Internet for a few hours and found a way to get back to the original resolution. But now my monitor will not register and not displayed as generic Non - Pnp monitor. Ive updated all possible drivers and still nothing. I tried to unplug my monitor and the computer for a few minutes, but nothing.
  Monitor: Dell ST2320L
  Computer: Inspiron 580
  6 GB of Ram 64 bit
  Intel Core i3 550 @3. 20 ghz, 3.20 ghz

  Open Device Manager > monitors. Open the generic monitor and click the driver for the update. Choose 'Browse my computer for driver software', her choose "Let me pick from a list...". "Uncheck the"Show compatible hardware"and scroll to Dell Computer Corp. look in the right column of your monitor, and I hope that it is listed.

  SC Tom

• I have a problem with finding a PnP USB audio device when you search for available audio devices.

  Hello.

  I am building an application that can find a PnP USB audio device and play a tone if the device is connected. I am able to search audio devices using "Sound Device Info.vi" of the lvsound2.llb that comes with labview.

  The vi can find the USB device in good conditions, but there are problems - I'll try to describe 2 scenarios.

  1. the USB device is connected before 'Sound Device Info.vi' is called for the first time.

  In this case, the program can find the USB device. If I unplug it, the device disappears from the list of found audio devices. If I reconnect to the same USB port, it reappears in the list. It's all good.

  If I reconnect it however a new USB port, the device is not found. This is not good.

  2. the USB devices is not connected when 'Sound Device Info.vi' is called for the first time.

  "Sound Device Info.vi" is not able to find the device. Disconnect and reconnect does not make a difference.

  I'm under labview 2012 on windows 7.

  I am running the application as an exe to build.

  I call 'Sound Device Info.vi' as a 'call for reference"and the reference is closed between calls to the vi. I was hoping this would unload the dll used in "Sound Device Info.vi" and would solve the problem, but it didn't.

  Is there a way to reset the information usb labview during execution?

  Concerning

  Stephan.

  Hey Stephan.

  The sounds screws require a DLL located in:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2012\resource\lvsound2.dll

  Internally, LabVIEW uses the DirectX API to enumerate devices. The one caveat is that probe us for devices when loading the DLL. We probe not later. So that it works for Bluetooth, USB, fire wire, etc. devices that can be inserted or removed at any time, you control somehow when this DLL charge and discharge. To do this, please see the following document:

  Dynamically that I can load and unload a DLL in LabVIEW?

  http://digital.NI.com/public.nsf/allkb/77594203D78D12278625729100758BE5

  I would also recommend that you provide a Kudo to this idea:

  Updated library lvsound2 (Sound Input/output Sound live) to support audio devices change on the fly

  http://forums.NI.com/T5/LabVIEW-idea-Exchange/update-the-lvsound2-library-sound-input-sound-output-V...

• XP Device Manager shows me 'PnP BIOS Extension' with a yellow top flag

  I tried to load the new software for an HP printer and it would not load correctly. I checked the Device Manager to see if the USB port has an error, but instead I see an icon with a yellow flag on it in "System devices". The name of the icon is 'PnP BIOS Extension'. I just click the mouse over it to see the Properties , and there are three tabs: general, pilot, Details

  the device status window general tab has this message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39).
  
  
  Driver tab, it says:
  Driver provider: unknown
  Driver date: not available
  Driver version: not available
  Digital signer: not digitally signed
  On the Details tab, it says: ROOT\SYSTEM\0003
  I tried the driver but it failed with the message: the hardware was not installed because the wizard cannot find the necessary software.
  
  
  Can someone help me understand how to fix this problem?

  Well you can right click on it, select "update driver..." Or, try to update the

  Hp BIOS, if its current, you may have a defective battery on board, it would be

  give some data, but perhaps not all, anytime, cold weather brings on battery

  and the questions of the bulb... Also, try to update the software of the chipset advice, get it from its

  MFG (intel, amd, etc.), which gives the ability to run hardware tips xp...

• G226HQL generic vs Pilot PNP

  I just bought a G226HQL for Windows-10.  The monitor does not come with a driver, nor Acer provides a driver through their Web site.

  10 Windows uses by default the generic drivers PNP which gives me a maximum resolution of 1280 x 1024.  As the highest resolution is 1920 x 1090, the image is stretched.

  Can anyone suggest a workaround solution that will allow me to use the maximum resolution?

  Oh hell...

  I just needed to update the video card drivers...

  Thanks for the help.

  DS-

• Lexar Jumpdrive Firefly 8 GB flash drive not PnP

  I recently bought a Lexar Jumpdrive Firefly 8 GB flash drive.  I am running XP and it should be PnP but XP keeps looking for a driver.  I have tried all USB ports, I checked that my drivers are up to date but all to no avail.  I can't understand what is the problem.  Can anyone help?

  Make sure that you go and download the drivers for your Flash drive
  Please rate me upward if you find my post helpful. Thank you!

• USB is not recognized PNP devices

  I have a HP Mini 110 runing XP SP3 and updates.

  When I connect various USB devices as a generic USB, several thumb hub disc, an externel usb IDE drive, an HP USB keyboard and a usb mouse.

  When I plug in I hear the chime that the device has been discovered.  I can find the device in the Device Manager in the 'other' file.

  These devices, all work on another Windows XP desktop system.

  So I wonder if somehow the PNP mapping is watered or generic device .inf files are missing.  It's just a wild guess.

  Todd

  Well, I found a solution of sorts.  I restored to a previous point restoure with%SystemRoot%\System32\Restore\Rstrui.exe.  This seems to cause problems with Norton Antivirus, but it solved the problem of USB.

  If we do not know the real reason that wouldn't be not configure devices connected to the USB ports, but I have a solution.  At least until that everything that has been done in the last two months since the restore point I used happen again.

  Todd

• Restore settings from the generic pnp monitor on Dell laptop

  While trying to do a second monitor to work with my Dell laptop, I changed somehow the settings on my laptop screen.  Looks like it has changed the appropriate parameters for the additional monitor.

  I can't understand how to restore the original settings for the generic pnp monitor on my laptop. I don't know how to manipulate icons in the window' display settings '.»  When I move the '1' icon, I see just zeroes--not numbers.  At one point, the size of the modified icons - the '1' was smaller and larger '2'. Who is now reversed.

  At this point, I want to just restore the settings of the laptop monitor the way in which they were and start on my original problem (which was Windows Media Player works with the second monitor).

  If you disable the second monitor that the computer should return to the unique display. In the display settings, click on the second monitor if boxes before "this is my main monitor" and "Extend the desktop to this monitor" is checked, click to uncheck the boxes, then click on the apply"" button.

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Set up multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Understanding multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

  my original problem (who used to work in Windows Media Player with the second monitor).
  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

  Solving the multiple monitor problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems