Pointer problem

Similar Questions

• Equium A100 - 549 Touchpad / pointer problem

  Greetings

  I'm having a problem with the computer laptop girls :(

  When you start the lappy up to 60% of the time once the desktop and its loading bits in the lower right the right pointer disappears and we cannot do anything with the machine outside turn off using the power button.

  If we continue trying to start the machine, eventually it will work normally. It's just like a random event: S

  I have been through the forums and the FAQ etc, I have uninstalled and reinstalled the drivers touchpad etc and tried some of the corrections mentioned on these forums, but nothing seems to solve the problem, for example the bios, chipset drivers...

  Wouldn't be a windows problem?
  Is it worth taking the time to go through the process of running a start-up in minimal mode and looking for a service does not, or reinstall a full windows? or is it something that I didn't think?

  Any help and ideas would be fantastic thanks :)

  You can start a computer laptop in SafeMode (F8 at startup) and check if there is the same problem with the touchpad and pointer?

• HP Envy 15 k035tx: k035tx Hp Envy 15 - pointer problem

  The pointer does not record a click until I mover the pointer. For example I want to close a window, I click the x, but does not close the window until I moved the pointer a little after the click. It happens everywhere not in a program or a specific window. When I click the x button, once, it becomes highlighted as if you click, it closes only when I moved the pointer after the click. Please help, I just bought it and I have a few days claim a problem if it has everything to come back.

  Hello

  You are welcome

  Try the following.

  Download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66109.exe

  Then, open windows control panel - programs, select uninstall a program.  When the list has loaded, right-click on the 'Synaptics ClickPad Driver' entry and choose uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• mouse pointer problem

  I have synaptics pointer device on my laptop and its console, has decided to stop showing the 'trails', but the tracks continue.  Any help, anyone?  I'm running on Vista Home Premium

  You can get in trouble with your device drivers, firmware and/or software. Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you shoulddo what is available for your synaptics pointing device at least (drivers, firmware and/or software) and all you have time to do - they help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Procedure entry point problem

  After startup I get an error message saying: procedure entry point could not be found for reader_sl.exe. It comes with a long list of numbers and letters and more information on the dynamic link library. When a pdf attachment is associated with an email in Outlook Express does not open the attachment. When I try to open a program of Pinnacle and Adobe Reader adds to this the same message appears there is different information only after the message that the procedure entry point is "not found". This problem can be corrected?

  Uninstall/reinstall Adobe Reader . MS - MVP - Elephant Boy computers - don't panic!

• VPN between Cisco and Check Point problem

  Guys,

  I have problems to establish a vpn site-to-site between a Cisco 3660 e router tunnel a firewall checkpoint NG AI R55.

  In the SiteA is an environment with a Cisco 3660 router using the following configurations:

  crypto ISAKMP policy 1

  md5 hash

  preshared authentication

  Group 2

  life 86400

  !

  ISAKMP crypto key [removed] address 172.17.10.111

  !

  Crypto ipsec transform-set esp - esp-md5-hmac serasa

  !

  Serasa 1 ipsec-isakmp crypto map

  defined by peer 172.17.10.111

  Set transform-set serasa

  match address 101

  !

  interface Serial5/4

  bandwidth 64

  IP 192.168.163.6 255.255.255.252

  no ip unreachable

  No cdp enable

  card crypto serasa

  !

  IP route 10.12.0.155 255.255.255.255 192.168.163.5

  IP route 172.17.10.111 255.255.255.255 192.168.163.5

  IP route 172.17.10.155 255.255.255.255 192.168.163.5

  !

  access-list 101 permit tcp 172.248.7.200 host 10.12.0.0 0.0.255.255 eq 3315

  In the SiteB, we have an environment highly available Nokia using VRRP.

  The IP address configured as a cluster in the Control Point is 172.17.10.111.

  We have already confirmed all the configurations of the phase 1 and 2 and is OK, but the VPN is not established.

  The following messages appear in the router and the firewall:

  ROUTER

  June 15 at 10:39:24 orbital: ISAKMP (0:252): check IPSec 1 proposal

  June 15 at 10:39:24 orbital: ISAKMP: turn 1 ESP_DES

  June 15 at 10:39:24 orbital: ISAKMP: attributes of transformation:

  June 15 at 10:39:24 orbital: ISAKMP: program is 1

  June 15 at 10:39:24 orbital: ISAKMP: type of life in seconds

  June 15 at 10:39:24 orbital: ISAKMP: life of HIS (basic) 3600

  June 15 at 10:39:24 orbital: ISAKMP: type of life in kilobytes

  June 15 at 10:39:24 orbital: ISAKMP: service life of SA (IPV) 0x0 0 x 46 0 50 x 0 x 0

  June 15 at 10:39:24 orbital: ISAKMP: authenticator is HMAC-MD5

  June 15 at 10:39:24 orbital: ISAKMP (0:252): atts are acceptable.

  June 15 at 10:39:24 orbital: IPSEC (validate_proposal_request): part #1 of the proposal

  (Eng. msg key.) Local INCOMING = 192.168.163.6, distance = 172.17.10.111,.

  local_proxy = 172.248.7.200/255.255.255.255/0/0 (type = 1),

  remote_proxy = 10.12.0.0/255.255.0.0/0/0 (type = 4),

  Protocol = ESP, transform = esp - esp-md5-hmac.

  lifedur = 0 and 0kb in

  SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 2

  June 15 at 10:39:24 orbital: IPSEC (kei_proxy): head = serasa, card-> ivrf =, kei-> ivrf =

  June 15 at 10:39:24 orbital: IPSEC (validate_transform_proposal): proxy unsupported identities

  June 15 at 10:39:24 orbital: ISAKMP (0:252): IPSec policy invalidated proposal

  June 15 at 10:39:24 orbital: ISAKMP (0:252): politics of ITS phase 2 is not acceptable! (local 192.168.163.6 remote 172.17.10.111)

  June 15 at 10:39:24 orbital: ISAKMP: node set 2114856837 to QM_IDLE

  June 15 at 10:39:24 orbital: ISAKMP (0:252): lot of 200.245.207.111 sending my_port 500 peer_port 500 (I) QM_IDLE

  June 15 at 10:39:24 orbital: ISAKMP (0:252): purge the node 2114856837

  June 15 at 10:39:24 orbital: ISAKMP (0:252): unknown entry for node-528822595: State = IKE_QM_I_QM1, large = 0x00000001, minor = 0x0000000C

  June 15 at 10:39:24 orbital: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode failed with the peer to 172.17.10.111

  FIREWALL

  IKE: Main Mode has received Notification of peers: first Contact

  IKE: Completion of Main Mode.

  IKE: Quick Mode has received Notification of the counterpart: no proposal chosen

  IKE: Quick Mode has received Notification of the counterpart: no proposal chosen

  IKE: Exchanging information received remove peer IKE - SA:

  Anyone have idea who might be the problem?

  Thank you very much for the help.

  Fabiano Mendonca.

  Cool. pls mark as resolved if that might help others... the rate of responses if deemed useful...

  REDA

• My wifi limited shows, no card wireless for internet access or access point problem

  Hi, I tried to connect with wifi, it shows connected but wrote 'limited' by the side. and below his writings no internet no access. I tried troubleshooting but it says wireless access point or no fixed adapter problem. can sum1 if you please help me with this problem

  Hi Dimma,

  What is the brand and model of your computer?

  This could be caused due to various reasons.

  -Due to the wireless router settings.

  -Due to the IP address.

  Follow the following troubleshooting methods:

  Method 1: I suggest you to reset the wireless router and check if this solves the problem manually.

  Consult the router's manual to know how to manually reset the router.

  Method 2: Reset TCP/IP and check if this solves the problem.

  Follow these steps:

  a. press the Windows key (start screen will popup), type cmd on the right click of the screen prompt, select run as administrator.

  b. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:
  netsh int ip reset c:\resetlog.txt

  c. Note: If you do not specify a path of the directory for the log file, use the following command:
  netsh int ip reset resetlog.txt

  d. restart the computer.

  
  

  Method 3: If you use WEP encryption change to WPA or WPA 2.

  Hope this helps and let us know if you need help. We will be happy to help you.

• break points - problem

  Hello to all fans of Muse

  I have a question about the breakdown of points - how to set the page to be on mobile devices? I put: 1200px, 720px, 600px, 480px, 360px and I have a problem with the display on the Iphone + 6s, 6s to iPhone.

  Thank you
  Lukas of Poland

  Hello

  The iPhone 6 s browser is 375 PX and iPhone 6s + is 414 px. There are 2 ways to make sure it looks good in both the phone.

  • Create 2 breakpoints more than 375 px and 414 px and make adjustments according to your design needs.
  • OR go to 480 px stopping point and make sure that resize properties and pinning adapted for all elements is chosen so that it does not break the structure of the page to 414 px and 375 px. To verify that you can move the scrubber to 414 and 375 to check if there is any problem with the elements.
    • Preferably resize properties should not be 'None '.

  Do not hesitate to let me know if you have more doubts about the same and let me know the specific of the display problem on iPhone 6s and 6 s +.

  Kind regards

  Vivek

• iTunes store pointer problems

  I use iTunes on a PC x 64 Win10. The iTunes Store is normal except for the movies section. The mouse pointer is not aligned with his actions. The pointer appears several inches upward and to the right of the 'click' action takes place. I've updated to the latest version of iTunes, video drivers, Win10 and Logitech mouse software software. The store displays / reacts normally until I go to the movies section, and then the mouse pointer simply does not work properly. I can move the pointer on the screen and see film selections "light up" out of one side of the pointer and can select a movie to rent or buy, but it's all or nothing and I can't use the slider bars or points click on the right side of the screen to store. The app store on my iPhone 6 works as advertised. Any suggestions?

  Make sure all Windows fonts scaling of the display option are set to 100%.

  In iTunes in Edition > Preferences > advanced press reset the Cache.

  TT2

• VAIO control center - access point problem

  I can't share my vaio control center network. It is passive. But I do can make adjustments in other menus such as keyboard lighting, battery maintenance, charging usb. Only the network menu does not work. Why is this?

  My model: sve15129cvb

  Thanks in advance

  

  Hello Burak,

  SVE15129CVB is part of the Asia-Pacific. See the following steps to resolve the problem:

  1. Activate the network wireless in the computer first:http://windows.microsoft.com/en-IN/windows-8/cant-find-wireless-network
  2. Reinstall the VAIO Control Center, after using VAIO Care.
  3. Press Windows + Q to open the search box.
  4. Type VAIO Care and click on enter key.
  5. VAIO Care > Advanced Tools > restore and Recovery > reinstall applications and drivers.
  6. For more information about how to contact a Sony facility in another country, please visit the following site: https://www.sony-asia.com/section/contactus

  If my post answered your question, please mark it as an "accepted Solution".

• EUC Access Point problem

  Hello!

  I'm testing the New Horizon 7 with EUC Access Point (AP) (euc-access-point - 2.5.0.0 - 3588605_OVF10).

  I deployed configuration "1 NIC" PA Finally, when I open https://AP-FQDN I did have an error 'no page displayed'.

  Has anyone already deployed the AP?

  Finally, I coped with it!

  The newspaper said that my password for root violated the requirement...

• Set point problem selected in the drop-down list box that is the XML data provider

  HI - new to Flex, experienced Java dev., hoping someone can help me see the light of what should be easy but...
  
  I have a Flex 3 MXML application form that contains a ComboBox as follows:
  < mx:ComboBox id = "physRegion" editable = dataProvider = "{regionRequest.lastResult.region 'false'}" / > "
  
  The combo box is filled by the provider of data like:
  MX:HTTPService id = "regionRequest" url = "flexDAOServlet" resultFormat = "e4x" method = "POST" >
  < / mx:HTTPService >
  
  and the underlying XML code looks like this:
  <>region
  Northland < label > < / label >
  < value > 1 < / value >
  < / region >
  <>region
  Auckland < label > < / label >
  < value > 2 < / value >
  < / region >
  ...
  
  Drop-down list box loads the XML code very well. the user can select an item and the appropriate value is submitted to the server without problem. My problem is when I want to "recharge" the form with previous values.
  I can reload the text without problem fields.
  
  But I can't work in my ActionScript function, how to set the combo box so that it displays "Auckland" for example, the element with the value = 2. I'll be back this server id, even if I could get the XML code or label if that would help me solve this problem.
  
  I tried physRegion.selectedItem = "Auckland" - nope. "
  I tried physRegion.selectedItem = 2 - nope.
  I tried
  var XML = myXML:XML ("< region > < label > Auckland < /label > < value_2 > < value > < / region >");
  physRegion.selectedItem = myXML;
  and - nope.
  
  I know that I'm a new style user here error (and thank you for reading this far! your patience is appreciated) but I can't for the life of me see what it is. Can anyone help?
  
  Many thanks in advance for clues. Apart from that, I'm loving Flex.
  Kind regards
  Adrian

  Two things to note. The only problem with the function that has provided ChiefRocka00 is that it is based on the identifier of the data, which means your always limited to have that be the identifier of your value. Personally, I'll be back queries a lot of times where the labelFIeld and dataField aren't labels / data pairs a suggestion would be to add a third parameter and have it checked for this identifier instead of the data. The other thing to note is that it is more common to use selectedIndex instead of selectedItem. If you do not want to do something more like physRegion.selectedIndex = selectCboIndexByData ("physRegion, ' Auckland", label) by using the update function of

  public void selectCboIndexByData(theCbo,_theDataValue,_identifier:String):Number {}
  for (var i: Number = 0; i< thecbo.dataprovider.length;="">
  If (theCbo.DataProvider.getItemAt (i) [ID] == theDataValue) {}
  Return i;
  }
  }
  return 0;
  }

• After Effects CC GoPro Footage to the Point / Point problem

  

  On the left you have the video imported by GoPro hero 3, imported intto AF cs6. On the right... The same video imported to the latest version AF CC.

  For some reason any. AF CC live upward the timecode of the video and I can't understand why. In addition... when exporting video to Cinema4d GoPro camera Tracker... the camera does not work.

  Any help would be welcome.

  Kind regards

  Ivan

  You have options for timecode display in the interpretation of the images. This explains the different time codes.

  

  In regard to the Camera Tracking for C4D, here is a small tutorial I did a long time ago. Sorry, there is no audio, but you should see how it's done.

• SQL statement on the point - problem with commas in the chain

  I have a simple report that all the titles of the work of the groups registered in our database.
  
  I pass the title to an element of the apex, then on a second list of page records that correspond to this title of work to help:
  
  and ed.ede_job_title =: P35_JOB_TITLE
  
  If there is that a comma in the title of the post report finds records that match the string until the comma does not appear the full string.
  
  Therefore 'Project Manager, Operations' match all records in 'Project Manager'.
  
  When there is a space left in the title of the post the report also displays the jobtitle without the space left.
  
  My apologies if this is answered elsewhere, I have a search.

  In the definition of report link, put the value of the column between backslashes.

  Scott

• Problem on not correct mouse pointer position

  My Client OS: Windows Vista Ultimate SP1 x 64

  I use Vmware Workstation 6.5.1 build-126130

  I invited two OS: Windows XP Professional 32-bit SP2, Windows Server 2003 Enterprise SP2 32-bit

  The problem I found is:

  When my client OS (vista x 64) have the default DPI setting (default scale: 96 DPI), and the display resolution is 1440 x 900.

  My two guest OS (Windows 32-bit XP and Win2003 32 bit) works well and no mouse found problem.

  But when I change the DPI setting as custom DPI 134 scale, and display resolution is always 1440 x 900:

  1. in guest OS Windows XP 32bits: mouse problem has occurred!  The mouse pointer is visible, but the position of the pointer is not TRUE!

  You can do like this to find this problem: right-click on the desktop (in the guest OS) to open the menu on the right, you will find the mouse pointer problem.

  2. in the 32-bit guest OS Win2003: mouse problem onlly when the mouse pointer from the guest operating system is close to Client operating system.

  How to solve this problem? I'm short-sighted that I can't put up with the default settings. (All things is too small, especially the font size)

  Hi, do you understand you this, I had the same problems, the pointer of the mouse poster, but poniter is not in the location that is clicked - the click action occurs approximately 2cm below and to the right... but your question about DPI made me relise its do with DPI settings...

  You have to click with the right button on the VM Workstation shortcut, select Properties, compatibility, and then select DISPABLE DISPLAY the SCALING ON HIGH DPI SETTINGS... It fixed the problem for me with vista x 64 as host and XP Pro / OpenSuse as guests.

  The thing I don't understand is when the host is vista 32 bit, it was not the problem...