Political migration of MSC sensor

Similar Questions

• Cold migration of MSCS cluster node clients?

  Work on the establishment of a MSCS cluster on 2 hosts.  The hosts are the ESXi 5.5 build 1892794.

  My shared disks are RDM compatibility mode physical that I have attached to a second SCSI controller in physical sharing mode.

  My cluster validation wizard is successfully completed.

  However, if I turn off the guests, everyone migrate to a different host (with FC to the RDM LUN connectivity), turn on and then run the cluster validation Wizard error e/s disk wizard reports on tests of arbitration and failover.

  I learned that when I see these mistakes I can unsubscribe the VMs, detach the storage from the host, restart the host, attached storage, re - save virtual machines, and then validation is successful.  However, it is a bit complicated and if I say lose a blade and need to put one of my guests node elsewhere, I want to do without the time and hassle.  Is this possible?

  I know vMotion is not supported with the physical bus sharing, but this ban applies to cold (power off) so migration?  Or is this an indication that I screwed up my configuration?

  Any thoughts would be great.

  Thank you

  Here's what VMware has sent:

  =======================

  -A virtual machine that has a ROW in a MSCS cluster connected in physical compatibility mode cannot be vMotioned.

  -Even if you do a cold vMotion (stop the virtual computer, then vMotion), the ROW could be detected as vmdk and you may need to remove
  She and present it back or re - enter as you mentioned.

  -Best practices recommend Vmware are that - before the migration, remove the ROW of the virtual machine, and then migrate the virtual machine. Once the
  VM was vMotion, then you can attach the RDM to the virtual machine.

  Unfortunately there is no work around on this
  scenario.

  ======================================

  So I guess the cold, you can migrate the MSCS cluster nodes but sometimes it does not work quite as well and so its best to remove the ROW before migration cold.

  Thanks to all who have posted!

• Deploy the ADF application to manage the server - political migration jazn

  Hi Experts,
  
  I created a sample application web ADF and activated the ADF security. I created the ear of the application using the deployment jdevloper profile. Incase if I deploy the ear to weblogic through the weblogic console management server, the application works very well. (in this step security policies are automatically deployed in the field. However, incase if I deploy only for Server Manager, then the application does not work. in this case, when I invoke the url the browser runs all the time and refreshing but not the loaded page. If I check the policies then the they aren't there.
  
  I have to manually migrate the jazn policies before you deploy on the Management Server? Is there a way that can be done automatically when deploy us the ear on the server of management through the weblogic console.
  
  Thank you

  Hello

  for the development of business applications I suggest Oracle Enterprise manager, as shown here: http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/adf_security1/adf_security1.html

  Frank

• Should I clean the sensor before mounting the new lens?

  Hello guys! Sorry for stupid question, but I'm not sure I know the correct answer. One of the devices that I use is Canon 5 d classic, and there a lot of dust on the sensor and the viewfinder (not unusual for 5di). I just got a new goal, and I wonder if there is a possibility for the dust on the sensor/viewfinder to get inside the lens while filming? Or I have to clean the viewfinder/sensor before mounting? Or just forget to dust as will evertually get inside the lens of dust? Thank you! I appreciate your answers!

  Good advice so far...

  1. you don't have to worry about the use of your lens on the camera. The goal is pretty well sealed against dust, so all the dust that's in the mirror in the camera box is unlikely to migrate into the lens (it is more likely to migrate on the sensor, but even what is low risk). There is no such thing as completely dust free a lens, anyway. A few grains of dust inside a lens have virtually no effect on the images.

  2. you probably should take advantage of your membership CPS to have the camera, cleaned and checked.

  But you can also learn how to clean yourself. Some call it the classic 5 d a magnet 'dust '... Just, I think he's got a big sensor dust get on and does not have a self-cleaning feature because is on later models. It's going to get dusty again, you can bet. So at least you might want to get a blower bulb ("Rocket Blower" is a brand) and learn to use it.

  You probably already know, seen in the viewfinder of the dust is usually harmless. It is usually on the mirror or on the focus screen and will not be displayed in the images taken with the camera (unless she manages to migrate on the sensor itself, which is hidden and protected behind the shutter with the exception of the brief moment when an image is rendered).

  If the dust seen in the viewfinder appears sharp and in short, it is on the focus screen. If it is fuzzy and blurry, it's on the mirror. Unless you know how and have the right tools for the job, it is not a good idea to give the focus screen and nothing more aggressive than a breath of air from a blower bulb mirror. These can be cleaned more thoroughly, but both are very easily damaged: the screen is optical plastic and can be ruined by using the right type of gasoline on it. The mirror is before coating aluminium vaporized, so is very easily damaged. Aside from an occasional breath of air from a blower bulb, I recommend to leave the mirror screen and concentrate only until you have done a professional cleaning.

  A more serious problem to monitor does not light seals. There are seals foam around the edge of the focus screen, which builds the mirror upward against when it is triggered, to keep stray light out of the box mirror during exposure. Over time, these seals foam begins to degrade and may throw particles or even coat of glue holding them in place on the mirror screen and focus. In general, clean up the damage, remove the old and install new foam gaskets are a little tricky, so I recommend that you have any replacement of the foam seal done by a professional. (Also, there are foam seals similar elsewhere inside the camera that are likely to need replacement too, if the joints in the mirror box go wrong. A pro will know what is needed and have the skills to work deeper inside the camera.)

  Time does not always have to send a camera in for a simple cleaning of the sensor, so it's something that you can learn to do it yourself. There are two sites that discuss good detail: www.cleaningdigitalcameras.com and www.copperhillimages.com. The first is maintained by independent, professional camera repairmen who also are providers of the repair industry and sell most of the specialized tools and supplies needed for the cleaning of the sensor. The second part of the merchant site one of special cleaning procedures ("Copper Hill Method"). Both sites have good information. Read them carefully before performing any cleaning yourself.

  If you decide to learn how to clean the sensor yourself, some things you need to know...

  Never use a q-tip common (i.e., "Q-Tip") inside a camera. They throw cotton fibers that can enter and jam of delicate mechanisms.

  Check the manufacturer's website you plan any liquid sensor cleaning aid is formulated and approved for your particular camera.

  No matter what digital camera that has never had the sensor cleaned almost always need a "wet" cleaning first. This is because there is almost always oils on the sensor (actually in most of the cameras the surface to be cleaned is a filter which covers and protects the sensor). These oils are excess thrown out of the shutter mechanism. Any method of "dry cleaning" that touches the sensor will coat oils and make things worse. If a "wet cleaning" is always advocated, first time around.

  It is important to have some the aircraft batteries fully charged before cleaning and work quickly, so that to be able to hold the mirror up and the door is open doesn't work low allowing the shutter to close and the mirror to fall on a tool used for cleaning. Professional cleaners often use a continuous supply instead of a battery, to be sure.

  It is convenient to have a magnifying glass Magnifier and light any for easy cleaning. When you view the sensor at the front, don't forget that the image is upside down and reversed. Thus, for example, if you have seen a job in the corner upper lefhand of your images, when you view the sensor directly you will find straw incriminated in the lower right corner.

  You usually have a variety of tools to do a multi-step cleaning...

  "Fan bulb cleaning' to blow the free particle outside ("Rocket Blower").

  "Wet cleaning" with approved optical and fluid swabs from cleaning to remove oils and the particles more strongly respected ('Copper Hill method kit', 'Pecs Pads", 'Pécs swabs', 'Eclipse' solution) of sensor cleaning.

  'Adhesive cleaning' using a slightly sticky surface take off slightly adhered particles ('Dust Aid').

  'Cleaning antistatic brush' stubborn Claire, remaining slightly adhered particles and to reduce static electricity that attracts dust ("Arctic Butterfly").

  "Deleting individual speck" with a reusable precision tool ("Speck Grabber").

  "Final Polish" always is a last step to remove the haze left by gasoline ("by LensPen sensor pen"). It also helps to discourage the dust sticks to the surface again.

  I've included a few brand names of the products in parentheses as examples. There may be other equally effective products.

  Most of the time I find myself with several or even all of these when I do a cleaning of the sensor.

  See you soon!

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY

• 4240 and password recovery

  Hello

  I tried upgrading my 4240 via MSC sensor to IPS-CS-MGR-K9-7.0-5a-E4.  The upgrade has failed and the device was inaccessible!

  I consoled in the device and rebooted.  The login prompt is displayed, but the combo of user name and password admin does not work.  I went through the password recovery procedure, but now looks like this:

  Login: cisco
  Password:
  You are required to change your password immediately (years)
  Change password for cisco
  (current) password:

  Error handling of authentication tokens

  Anyone has any ideas on this message error, or how I can recover fully to its previous state?  The service account works and gets me into bash, but I don't know why there is a failure to access CLI.

  Thank you very much

  Liam

  hehe I have this kind of problem all the time (usually Friday)

  Have fun!

  PS: Don't forget to mark this question as answered. Thank you!

• conversion of ms cluster

  Hi, is there other aspects when migrating a MSCS from the physical to the virtual. The goal would be that the cluster is converted into line to avoid outages.

  In addition, vmware converter standalone can migrate the servers online?

  Thank you, Mark

  If I remember well MSCS is recommended to be used on RDM (Raw Device Mapping) between virtual and physical.

  Alternatively, you can refer to these KB articles:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1002661

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1004617

  Good luck

  ___________________

  A +, EASD, MCP, MCSA, MCSE, MCTS, MCITP, MCDBA, NCDA, VCP4

  If you find this or any other answer useful please consider giving points by checking the correct or helpful answer.

• Problems starting soa_server1

  Hello
  
  I have installed SOA Suite 11 g instructions to this , but get stack big mistake when you try to launch soa_serve1.
  
  oracle.mds.lcm.exception.MDSLCMException: ORA-06550: line 1, column 12:
  PLS-00201: identifier ' MDS_INTERNAL_SHREDDED. GETREPOSITORYVERSION' must be declared
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  
  at oracle.mds.internal.lcm.MDSLifecycleListenerImpl.start(MDSLifecycleListenerImpl.java:169)
  at oracle.mds.lcm.weblogic.WLLifecycleListener.preStart(WLLifecycleListener.java:191)
  to weblogic.application.internal.flow.BaseLifecycleFlow$ PreStartAction.run (BaseLifecycleFlow.java:277)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
  to weblogic.application.internal.flow.BaseLifecycleFlow$ LifecycleListenerAction.invoke (BaseLifecycleFlow.java:194)
  at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:57)
  at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:279)
  to weblogic.application.internal.BaseDeployment$ 1.next(BaseDeployment.java:609)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
  at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:185)
  at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:53)
  at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
  at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doPrepare(DeploymentAdapter.java:39)
  at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
  to weblogic.management.deploy.internal.AppTransition$ 1.transitionApp(AppTransition.java:21)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
  at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  Caused by: oracle.mds.internal.persistence.db.fcf.MDSDBIOException: ORA-06550: line 1, column 12:
  PLS-00201: identifier ' MDS_INTERNAL_SHREDDED. GETREPOSITORYVERSION' must be declared
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  
  at oracle.mds.internal.persistence.db.fcf.FailoverUtils.executeDBCode(FailoverUtils.java:555)
  at oracle.mds.internal.persistence.db.fcf.FailoverUtils.executeDBFunction(FailoverUtils.java:429)
  at oracle.mds.persistence.stores.db.DBMetadataStore.getRepositoryVersion(DBMetadataStore.java:939)
  at oracle.mds.persistence.stores.db.DBMetadataStore.checkRepositoryCompatibilityInternal(DBMetadataStore.java:1208)
  at oracle.mds.persistence.stores.db.DBMetadataStore.checkRepositoryCompatibility(DBMetadataStore.java:847)
  at oracle.mds.persistence.stores.db.DBMetadataStore.checkCompatibility(DBMetadataStore.java:1090)
  to oracle.mds.persistence.stores.db.DBMetadataStore. < init > (DBMetadataStore.java:268)
  at oracle.mds.internal.lcm.MDSLCMManager.createMetadataStore(MDSLCMManager.java:1869)
  at oracle.mds.internal.lcm.deploy.DeployManager.createMetadataStore(DeployManager.java:657)
  at oracle.mds.internal.lcm.deploy.DeployManager.deployToDBRepository(DeployManager.java:945)
  at oracle.mds.internal.lcm.deploy.DeployManager.deploy(DeployManager.java:433)
  at oracle.mds.internal.lcm.deploy.DeployManager.startDeployment(DeployManager.java:153)
  at oracle.mds.internal.lcm.MDSLifecycleListenerImpl.start(MDSLifecycleListenerImpl.java:159)
  ... 25 more
  Caused by: java.sql.SQLException: ORA-06550: line 1, column 12:
  PLS-00201: identifier ' MDS_INTERNAL_SHREDDED. GETREPOSITORYVERSION' must be declared
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  
  at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
  at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
  at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1034)
  at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
  at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:950)
  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1223)
  at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)
  at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3487)
  at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3858)
  at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
  at weblogic.jdbc.wrapper.PreparedStatement.execute(PreparedStatement.java:98)
  at oracle.mds.internal.persistence.db.fcf.FailoverUtils.executeDBCode(FailoverUtils.java:729)
  at oracle.mds.internal.persistence.db.fcf.FailoverUtils.executeDBCode(FailoverUtils.java:523)
  ... more than 37
  
  ]]
  [2009-11-26 T 16: 14:33.921 + 05:30] [soa_server1] [NOTIFICATION] [] [oracle.mds] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 0000IKk5l_X03zGpMwWBye1B3_j8000001, 0] [APP: worklistapp] ID of Application: worklistapp
  [2009-11-26 T 16: 14:33.921 + 05:30] [soa_server1] [NOTIFICATION] [] [oracle.mds] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: < anonymous >] [ecid: 0000IKk5l_X03zGpMwWBye1B3_j8000001, 0] [APP: worklistapp] "Metadata Services: Archives of metadata (MAR) not found."
  [2009-11-26 T 16: 14:42.656 + 05:30] [soa_server1] [NOTIFICATION] [] [oracle.jps.deployment] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 0000IKk5l_X03zGpMwWBye1B3_j8000001, 0] [APP: b2bui] Application [b2bui] is being deployed, to begin the political migration.
  [2009-11-26 T 16: 14:43.140 + 05:30] [soa_server1] [NOTIFICATION] [] [oracle.jps.deployment] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 0000IKk5l_X03zGpMwWBye1B3_j8000001, 0] [APP: b2bui] political migration request to [b2bui] completed successfully.
  [2009-11-26 T 16: 14:43.406 + 05:30] [soa_server1] [NOTIFICATION] [] [oracle.jps.deployment] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 0000IKk5l_X03zGpMwWBye1B3_j8000001, 0] [APP: b2bui] Codebase political migration to [b2bui] completed successfully.
  [2009-11-26 T 16: 14:47.125 + 05:30] [soa_server1] [NOTIFICATION] [] [oracle.mds] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 0000IKk5l_X03zGpMwWBye1B3_j8000001, 0] [APP: DefaultToDoTaskFlow] ID of Application: DefaultToDoTaskFlow
  [2009-11-26 T 16: 14:47.125 + 05:30] [soa_server1] [NOTIFICATION] [] [oracle.mds] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: < anonymous >] [ecid: 0000IKk5l_X03zGpMwWBye1B3_j8000001, 0] [APP: DefaultToDoTaskFlow] "Metadata Services: Archives of metadata (MAR) not found."
  [2009-11-26 T 16: 14:52.843 + 05:30] [soa_server1] [NOTIFICATION] [] [oracle.bam.adapter.adc.ADCResourceAdapter] [tid: [ASSETS].] [ExecuteThread: '0' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 0000IKk5l_X03zGpMwWBye1B3_j8000001, 0] [APP: OracleBamAdapter] * adapter ADC started and the configuration is loaded
  [2009-11-26 T 16: 14:55.921 + 05:30] [soa_server1] [NOTIFICATION] [SDP-25105] [oracle.sdp.messaging.engine.store] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: < anonymous >] [ecid: 0000IKk5zk103zGpMwWBye1B3_j8000003, 0] [APP: usermessagingserver] [arg: TOPLINK] initialization mode TOPLINK Messaging Store.
  [2009-11-26 T 16: 14:58.843 + 05:30] [soa_server1] [NOTIFICATION] [] [oracle.toplink.default] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 0000IKk5zk103zGpMwWBye1B3_j8000003, 0] [APP: usermessagingserver] TopLink, version: Oracle TopLink - 11g Release 1 (11.1.1.1.0) (Build 090527)
  [2009-11-26 T 16: 14:58.843 + 05:30] [soa_server1] [NOTIFICATION] [] [oracle.toplink.default] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 0000IKk5zk103zGpMwWBye1B3_j8000003, 0] [APP: usermessagingserver] Server: WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 1227385
  [2009-11-26 T 16: 14:59.015 + 05:30] [soa_server1] [NOTIFICATION] [] [oracle.toplink.default] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 0000IKk5zk103zGpMwWBye1B3_j8000003, 0] [APP: usermessagingserver] messaging_store successful login
  [2009-11-26 T 16: 15:08.484 + 05:30] [soa_server1] [WARNING] [] [oracle.toplink.default] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: < anonymous >] [ecid: 0000IKk5zk103zGpMwWBye1B3_j8000003, 0] [APP: usermessagingserver] []
  The local Exception stack:
  Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.1.0) (Build 090527)): oracle.toplink.exceptions.DatabaseException
  Inner exception: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
  
  Error code: 942
  Call: SELECT driver-name, MIME_TYPES, PROTOCOLS, CARRIERS, SENDER_ADDRESSES, COST, DELIVERY_TYPES, SPEED, STATUS_TYPES, CHECKSUM, SUPPORTS_CANCEL, ENCODINGS, SUPPORTS_REPLACE, SUPPORTS_TRACKING, SUPPORTS_STATUS_POLLING, DEFAULT_SENDER, ABILITY, LOCK_VERSION OF DRIVER_INFO
  Query: ReadAllQuery (oracle.sdpinternal.messaging.config.DriverInfo)
  at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:305)
  at oracle.toplink.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:613)
  at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:467)
  at oracle.toplink.threetier.ServerSession.executeCall(ServerSession.java:447)
  at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:193)
  at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:179)
  at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.executeSelectCall(DatasourceCallQueryMechanism.java:250)
  at oracle.toplink.internal.queryframework.DatasourceCallQueryMechanism.selectAllRows(DatasourceCallQueryMechanism.java:583)
  at oracle.toplink.internal.queryframework.ExpressionQueryMechanism.selectAllRowsFromTable(ExpressionQueryMechanism.java:2483)
  at oracle.toplink.internal.queryframework.ExpressionQueryMechanism.selectAllRows(ExpressionQueryMechanism.java:2441)
  at oracle.toplink.queryframework.ReadAllQuery.executeObjectLevelReadQuery(ReadAllQuery.java:467)
  at oracle.toplink.queryframework.ObjectLevelReadQuery.executeDatabaseQuery(ObjectLevelReadQuery.java:874)
  at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:674)
  at oracle.toplink.queryframework.ObjectLevelReadQuery.execute(ObjectLevelReadQuery.java:835)
  at oracle.toplink.queryframework.ReadAllQuery.execute(ReadAllQuery.java:445)
  at oracle.toplink.internal.sessions.AbstractSession.internalExecuteQuery(AbstractSession.java:2265)
  at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1079)
  at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1063)
  at oracle.toplink.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1022)
  at oracle.toplink.internal.sessions.AbstractSession.readAllObjects(AbstractSession.java:2712)
  at oracle.sdpinternal.messaging.storage.TopLinkStore.getAllDrivers(TopLinkStore.java:776)
  at oracle.sdpinternal.messaging.storage.MessagingStoreBean.getAllDrivers(MessagingStoreBean.java:534)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
  at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
  at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
  to $Proxy173.getAllDrivers (Unknown Source)
  at oracle.sdpinternal.messaging.storage.MessagingStore_urkbp2_ELOImpl.getAllDrivers(MessagingStore_urkbp2_ELOImpl.java:2821)
  at oracle.sdpinternal.messaging.DriverLocatorImpl.refreshCache(DriverLocatorImpl.java:646)
  to oracle.sdpinternal.messaging.DriverLocatorImpl. < init > (DriverLocatorImpl.java:126)
  to oracle.sdpinternal.messaging.DriverLocatorImpl. < init > (DriverLocatorImpl.java:70)
  to oracle.sdpinternal.messaging.DriverLocatorImpl$ InstanceHolder. < clinit > (DriverLocatorImpl.java:158)
  at oracle.sdpinternal.messaging.DriverLocatorImpl.getInstance(DriverLocatorImpl.java:162)
  at oracle.sdpinternal.messaging.DriverLocatorBean.init(DriverLocatorBean.java:203)
  at oracle.sdpinternal.messaging.DriverLocatorBean.registerDriver(DriverLocatorBean.java:91)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
  at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
  at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
  to $Proxy172.registerDriver (Unknown Source)
  at oracle.sdpinternal.messaging.DriverLocator_irja7k_ELOImpl.registerDriver(DriverLocator_irja7k_ELOImpl.java:214)
  at oracle.sdpinternal.messaging.command.CommandProcessorBean.driverCommand(CommandProcessorBean.java:80)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
  at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
  at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
  to $Proxy171.driverCommand (Unknown Source)
  at oracle.sdpinternal.messaging.command.CommandProcessor_p9x7mq_EOImpl.driverCommand(CommandProcessor_p9x7mq_EOImpl.java:61)
  at oracle.sdpinternal.messaging.command.CommandProcessor_p9x7mq_EOImpl_WLSkel.invoke (unknown Source)
  at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
  at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
  at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
  at oracle.sdpinternal.messaging.command.CommandProcessor_p9x7mq_EOImpl_1031_WLStub.driverCommand (unknown Source)
  to oracle.sdpinternal.messaging.driver.DriverHelper$ RegistrationWorker$ RegisteringState.onExecute (DriverHelper.java:526)
  to oracle.sdpinternal.messaging.driver.DriverHelper$ RegistrationWorker.run (DriverHelper.java:628)
  at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
  at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
  at weblogic.connector.work.WorkRequest.run(WorkRequest.java:95)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:516)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  Caused by: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
  
  I've seen a lot of discussion here to see if that solves my problem, but no luck.
  
  Anyone know how to get rid of it.
  
  Thank you
  Bile.

  What did you do?

  EDNDataSource
  Properties:
  user = system
  oracle.net.CONNECT_TIMEOUT = 10000

  EDNLocalTxDataSource
  Properties:
  user = system
  oracle.net.CONNECT_TIMEOUT = 10000

  is wrong - they should point to ora_soainfra

• Political scene discovered on device in MSC

  Hello world

  I've added mutli context mode MSC ASA device.

  I read that if I get political on the device already in network discovery it copy all the current config of the MSC device

  Need to know if it is safe on SAA in production and it won't change anything about ASA config?

  This unit is in mode multicontext.

  It will also copy the configuration from all contexts?

  Concerning

  Mahesh

  No production change will never happen on CSM without a user authorized to perform and confirming their.

  The configurations of all the contexts will be imported if you discover the device via the IP address of the admin context.

• How to circumvent the "Assistant" secpol.msc and configure State IPsec (esp, spi, enc, auth-trunc) and political (src, dst, in, on, fwd) directly as in the ip-xfrm Linux command?

  Right off the bat, the wizard tells me that I can't use a multicast address, when it is the only destination I am interested in security.  Here is exactly what I want to do - no more, no less (although I can use the mode of transport instead of tunnel at some point):

  #! / bin/bash

  Echo 2 >/proc/sys/net/ipv4/conf/eth0/force_igmp_version

  # NOTE: To avoid the possibility of breaking IGMPv2 snooping, src should ONLY be defined for SHIPPERS, NOT for RECEIVERS!  Otherwise, joins will be compromised by the IPsec encryption and the switch will not detect them.

  IP xfrm State flush; IP political xfrm hunting

  State of xfrm IP add src 10.0.2.15 dst 239.192.1.1 proto esp spi 0x54c1859e tunnel mode reqid 0x67cea4aa auth-trunc hmac\ (sha256\) 128 0xc8a8bf5ce6330699c3500bd8d2637bc1fa26929bab747d5ff2a1c4dddc7ce7ff enc cbc\ (aes\) 0xfdce8eaf81e3da02fa67e07df975c0111ecfa906561e762e5f3e78dfe106498e # aead rfc4106\ (gcm\ (aes\) \) 0x123456789abcdef0baddeed0deadbeeffeedface900df00d0fedcba987654321 128 #Error: duplicate 'ALGO-TYPE': 'aead' is the second value.

  xfrm IP strategy add 10.0.2.15 src 239.192.1.1 dst dir output stat CBC 10.0.2.15 dst 239.192.1.1 proto reqid 0x67cea4aa tunnel mode esp

  xfrm IP policy add 10.0.2.15 src 239.192.1.1 dst dir in src 10.0.2.15 stat dst 239.192.1.1 proto reqid 0x67cea4aa tunnel mode esp

  xfrm IP strategy add 10.0.2.15 src dst 239.192.1.1 dir fwd stat 10.0.2.15 src dst 239.192.1.1 proto reqid 0x67cea4aa esp tunnel mode

  A graphical interface which requires me to work in step by step mode (in particular to implement a relatively simple configuration of the shared key) with no idea of what irrelevant or confusing questions await us doing me no favor.  And while this computer uses Windows 7, the eventual target can use something older or newer.  I want to do is create the portable equivalent of a preferred scenario, no instructions to repeat the time-consuming and confusing.  This approach exist?  (I already checked cygwin and there seems to be no support for the ip packet, and even if there were, it seems not support sudo is.)

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Automatic application political Intrusion, multiple sensors at the same time.

  Hello world

  Under System

  Updates

  Rule updates

  The defense Center 750 we have activated the option download new rules and apply the policies automaticall to all sensors.

  But lately I see police applied on the sensor is a failure.

  It will apply on a sensor and fail on the rest.

  But when I manually apply one at a time, and then it worked fine.

  I also open the case with the cisco technology by him we should apply policies manually one at a time?

  Anyone know what else I can check for this problem?

  Concerning

  Mahesh

  Hmm. I think that if they are in a group, the policy must reapply if you have slected the box to do so (and the update is not already in place). This is how it works on mine.

  What say you your newspaper to update rule (filter on action = apply)? Mine shows the action to apply takes place such as configured (open image in a new tab to zoom in):

  fmc_policy_reapply.PNG

  

• Removed hard drive migration

  Hello

  I have a question - can I use the Migration Wizard for a USB-Attached hard drive?

  Why I ask: the wife had a MacBook Pro who succumbs to a horrible death - I think that the MSC ultimately failed (he had more than 9 years).  I pulled the hard drive (because the computer does not even) and put it in a box 2.5 "USB.  She has a new MacBook Air that we want to migrate its photos, mail and iTunes library to.  If necessary, I will copy them by hand - but if there is a way to do this in the Migration Wizard I would use that - or rather IT will use that!

  Thank you

  Brian

  Yes, you can use an external drive to migrate data using Migration Wizard. Just point to it!

  Alternatively, as you said, you can copy by hand.

• With the help of Lego sensors and motors through the LabVIEW and NI PCI card

  I want to connect a card PCI NI Lego motors and sensors and drive motors and the data of sense using LabView. What card PCI can I use? Thanks for a great site and fantastic community online.

  Hi Tom,

  Looks like a great app.  NXT with LabVIEW Migration will be a big intermediate step before joining more industrial and better sensors with a PCI, PXI, cDAQ or cRIO.  We have a lot of options when it comes to vision and control and acquisition of movement, and we have dedicated forums for all of these products as well.

  Machine vision: http://forums.ni.com/t5/Machine-Vision/bd-p/200

  Motor control and motor control: http://forums.ni.com/t5/Motion-Control-and-Motor-Drives/bd-p/240

  Programming LEGO Mindstorms LabVIEW Guide: http://digital.ni.com/manuals.nsf/websearch/93B7EC451C8DEEC68625762B005380FE

  Getting started with LEGO Mindstorms: http://digital.ni.com/manuals.nsf/websearch/80456522F9BE87FB8625746400540977

  Good luck

• The Adaptive brightness sensor issue

  Hello

  I have an Aspire 571 V5 Windows 8

  My screen never turns off automatically brightness adjust so it keeps dimming in light to dark every minute very annoying, I think that is because of the Adaptive brightness of sesnor on the laptop.

  I went to the farm settings, change the parameters of the plan and options advanced and then off "enable adaptive brightness when it is plugged or not."

  However it still does it even with this feature turned off, so I think that maybe its something on my laptop, this also?

  I tried to run on different plans battery performance and balanced, and it still happens.

  I also disabled the sensor monitoring service via the services.msc, but it still fades out, the luster fades when I reduce a browser on the desktop then brightness back up when I load the browser or another application.

  Thank you for any input.

  It is quite well uninstall Acer Power Management, I personally believe that it bloatware.

  As in: when I open the graphic panel HD Intel (r) go to the power and then turn off the "technology energy saving and click apply then ok" it works for a while, but every time I cut power and re connect re allows him of remains unchecked.

  It would be the power settings changing as the power exchange status (plugged in or not). Usually remedy this by creating a custom power plan and which by default. If you have a hard time let me know and I'll see if I can achieve something.

• MMC returns "MMC could not create the snap-in" when I try to run GPEdit.msc

  MMC returns "MMC could not create the snap-in" when I try to run GPEdit.msc

  I got Home Premium, but have since upgraded to Pro.  Now that I have Pro I have an option of the editor of the political group that is put at my disposal which, I guess, is not available in home edition Premium.

  Problem solved...

  Thanks for your reply.

  Thanks for the update, please close the thread! Itknowledge24.com

• BE5k tar BE6k Migration file fails

  Hi we are upgraded to a CUCMBE5k to 6 k (CUCM 9.1.2)

  Our existing server is on a HP MSC server and we bought the Cisco UCS C220 server. We follow the guide that describes the creation of the server then the import/export the tar files from the old server to the new CUCM below. Because it is on a new server that I am raising a new at the same time then I'll cut above.

  When I run the import, it fails. Attached is the work schedular failier. The log files have some info however, how I should handle this info, if I can. Has anyone experience this problem with the default TAR files?

  Thank you

  Mike

  There is no path of migration for CUCM out of a BE5k. You must build the new CUCM cluster from scratch. If you are patient, you can use BAT Import/Export to carry in most parts of the data; However, it will require a lot of massage in Excel, the columns will be different for your old version export and import on 9.1 2. Note that you can move the mailboxes CXN using COBRAS , but you must be on CXN 7.x or newer.

  If you have installed Cisco Unified Communications Manager Business Edition 5000 on an MCS-7828 server, and you decide that you need to migrate to separate Cisco Unified Communications Manager and Cisco Unity Connection environments for increased scalability and capacity, you can reuse that MCS-7828 server to run Cisco Unified Communications Manager in a MCS-7825 cluster. Although you can reuse the server, you must reenter your data on the server manually. You must also obtain another server to run Cisco Unity Connection.
  
  

  http://www.Cisco.com/en/us/docs/voice_ip_comm/cucmbe/install/8_6_1/install/cmins861.html#wp795012

  Please remember useful frequency responses and identify useful or correct answers.