Poll: Is it fair for the non-removable logos like MOTOROLA and Verizon, to be used as tools against me on my own marketing device?

Similar Questions

• I signed up for the photos of 10 a month, and I chose pictures of licenses.  However, when I download the pictures I have a license on my desk always have the "stock" of writing through them.  How can I remove this?  Thank you

  I signed up for the photos of 10 a month, and I chose pictures of licenses.  However, when I download the pictures I have a license on my desk always have the "stock" of writing through them.  How can I remove this?  Thank you

  Follow these steps to download: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

• I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet

  I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  I have reinstalled the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  Install the appropriate network device drivers and software from the Dell downloads web site for your particular model, or better yet, tag Service...

• I try to download the free version of Acrobat DC at trial. An operational conflict comes up saying "Safari must be closed for the installation of Acrobat. Close and re-launch "."   I have all the accounts and restarted my Mac and still this mess

  I try to download the free version of Acrobat DC at trial. An operational conflict comes up saying "Safari must be closed for the installation of Acrobat. Close and re-launch "."

  I have all the accounts and restarted my Mac, and still this message.

  I am working on Mac 2.7 GHz intel Core i5 running OS X version 10.9.5.

  Can someone please help?

  Go to the installation, update, & subscribing to Acrobat

• I made the payment for the annual program on October 14 and be required ro balance once again, why?

  I made the payment for the annual program on October 14 and be required ro balance once again, why?

  Hello

  You can refer to the instructions in the links below:

  Connect and disconnect activate Cloud Creative applications

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Activation and deactivation of troubleshooting

  Creating cloud connection errors

  Evaluation mode showing creative cloud

  Let us know if that helps.

  Kind regards

  Bani

• Hi Folks, I'm ready to go with the versions of CC of LR and Psalm I currently use Apple products and the iCloud for storing photos, they stay on the iCloud or do they need to go to a related version CC?  Also, I guess that versions CC of LR

  Hi Folks, I'm ready to go with the versions of CC of LR and Psalm I currently use Apple products and the iCloud for storing photos, they stay on the iCloud or do they need to go to a related version CC?  Also, I guess versions CC of LR are Mac compatible.  Can they go on several devices, the cloud itself, including mobile devices like the iPad?  Thanks a lot in advance, Dave.

  You can have your photos on iCloud without any problem.  Lightroom CC 2015 is compatible with mac, please check system requirements of Lightroom CC 2015. You can install Creative Cloud on 2 machines, however, you can't use both the at the same time, the control 1:1 point: http://wwwimages.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-2015 0407_2200.pdf

  You can use Lightroom for mobile or your ipad and iPhone. Please check Adobe Lightroom for mobile FAQ

  I hope this helps.

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• If I create a website for a client, it will be able to update certain content using another tool for Adobe (it won't use (and buy) DW just few updates)?

  If I create a website for a client, it will be able to update certain content using another tool for Adobe (it won't use (and buy) DW just few updates)?

  Why not contribute? Always sold, my clients love it. Each of them made. They all hate wordpress and Joomla, and when they try to contribute, they all thank me. I don't even have to teach them how to use it.  But if they do not spend a penny on any software, then you're kind of stuck.

  There is a CMS for Dreamweaver by Studio extend I think. I bought it, and it is not very good in my opinion. It is not integrated in the system uses DW model, then you will need to open each page and select a div at a time to make editable manually. Could be so much more. I think it's a domain Adobe completely blew with DW.  Absolutely, there should be an integrated way in order to offer a type CMS without Contribute workflow. Having to use WordPress is not something that I like. Most of my clients is a small business and need one, maybe 2 people to make fundamental changes to their pages. Built in CMS would be perfect. I continue to use DW to build sites, and I could let minor things without a disbursement of $200 for the customer.

• apply restrictions for the non-linear curve fit

  Hello Forum users,.

  I am currently working on a VI control which is supposed to create a specific model of pressure inside a hollow tube to provide a test environment for pressure sensors. The details are many and complicated, so let's say I am sure that my formula to calculate this profile according to the pressures inside the hollow rings around this tube will work.

  To find the correct pressure for each ring values, I've linked to a model VI containing this form to Lev. - Mar algorithm (the non-linear curve adjustment) and let it run.

  Technically, there is no problem and Lev - Mar find values to adjust the function for the values (not perfectly sure, but close enough).

  The problem is, however, that, since the device, once suitable values for the positioning and size of the rings are found, must be built, the simulated pressure rings perhaps intersect not between them. To apply this rule, I added a check to my VI of model and if the values passed to Lev - Mar breaking the rules, the VI model gives a matrix of zeros to follow him (I tried an empty array, but that only leads to error messages).

  This solution did not work. Lev - Mar seems to ignore these cases always looks for values that break my rules (and if I put these values through my model VI, I get a matrix of zeros, as expected, so the audit seems to work).

  Perhaps I misunderstood the algorithm of Lev - Mar and it does not actually check each possible defined coefficients of finds.

  Is it possible to adapt to any function of a set of values while keeping the predefined boundary conditions?

  Oh, before I forget:

  I use LabVIEW version 8.2 in the Institute, because the workshop systems is not installed 8.5 for some reason any.

  Thanks in advance

  Thaliur

  Hi Thaliur,

  Thanks for posting on our forums.

  I understand your request you expect the algorithm to ignore a case to all zeros in the table. However, it is not implemented like this.

  Good news is, its source code can be edited and you could save your own personalized version of the algorithm of screws it is to you that you just add a check for a matrix of zeros or simply pass another parameter which indicates only a case of "broken rules". Then you would not have to continue the calculation.

  If I misunderstood your question, please clarify this. You can also post a code for further explanation, if you wish.

  Good luck with the project!

  Peter

• CHKDSK runs 5 steps for the system, 3 for the non-system partition partition

  Would be - to schedule chkdsk for the partition system using GUI by selecting two options available here
  It executes all 5 steps of verification of system files and disk.
  Would be - to plan an analysis of the non-system partition disk by setting the dirty bit (fsutil dirty) put...
  It runs only 3 floors of disk scan.

  Whence this difference?

  Fsutil allows you to set the 'dirty' bit for a NTFS disk, autochk performs an immediate chkdsk /f on that volume.  When the F switch is set, the activity of chkdsk is divided into three major passes: checking files, checking the index and security descriptors.

  If you use the R (chkdsk/r) switch, chkdsk performs twice more to look for bad sectors. During step 4, chkdsk checks all clusters in use; during step 5, chkdsk checks the unused beams.

  Given that you used the GUI instead of enter the chkdsk command in a command prompt window or in the run box, you must have checked the two boxes that appear under "to check disk options'-' automatically fix file system errors" and "will search for and attempt recovery of bad sectors.»

  Most of the time, one is not using the R switch or check the box to recover data from bad sectors because it can take a lot of time and (b) "recovered data" are usually not easily usable.

• I looking for the Add/Remove program in Control Panel and can not find it... is where?

  I can't find the Add/Remove program and I really need to DELETE a program my son installed on my computer... can you tell me where to find it? I went into Control Panel and do not see this option.

  Hello

  different name in vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  1. Open programs and features by clicking on the button start , by clicking on the Control Panel, click programs, and then click programs and features.

  2. Select a program and then click on uninstall. Some programs include the ability to modify or repair the program in addition to uninstall. but many simply offer the option uninstall. To change a program, click on change or repair. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  and here's a pictorial tutorial to help you in what to look for

  http://www.bleepingcomputer.com/tutorials/tutorial141.html

• Only circles for the spot removal tool

  Hey all!

  I am running in what seems a simple question, but there is no information about it on the line, or at least not something that can help me.

  When I choose the spot removal tool and click and drag to get a linear change (not a circle) instead of the desired effect, the circle expands. I can't be able to simply correct a non circular task.

  I checked on the line, still a few tutorials, but everyone seems to just drag and drop and it works.

  Any ideas?

  Camera raw version you use.  Detachment was only of circles ("points") in CS6 and earlier versions.  CC adds an improved stain tool that works like photoshop's Healing Brush tool.

• Force evaluation of the rules for the non-existent entities and unknown attributes...

  Hi all
  
  I have another issue potentially easy for the gurus of the OPA in this forum - there must be a simple explanation to this question but I'm just not see it.
  
  The problem that I am having with several of my rules, it's that the conclusion is not evaluated due to the non-existent entity instances or unknown entity attributes. As an example of the first scenario, I have a rule that checks for the existence of an instance of an entity with a type and status. The conclusion is evaluated as if there is at least an instance of this entity, otherwise, the conclusion remains unknown.
  
  Similarly, I wrote an equation to annualize all its (financial) obligations in a case, where the frequency of the obligation can be weekly, fortnightly, monthly, etc.. I created an attribute for each type of frequency, which are then added to the equation. The issue in this example, is that the equation does not conclude if there is not a value for each attribute in the equation. For example, if:
  
  assign 1 = A + B + C
  
  where A = 1, B = 2 and C is unknown, does not examine the attribute from 1 to 3, but will remain unknown. Logically, I expect that the lack of a digital defaults to 0, and rather unknown attribute value, but this is not the case.
  
  I looked at the 'Certain and known operator rule examples' help topic to try to understand how assign a value to an unknown attribute, but the example at the bottom of the topic page does not provide a sufficient explanation as to how the logic:
  
  point of the total team = team 1 round points + points of the round 2 team + team of turn 3 points
  
  the team of the round 1 points = 0 if
  Round 1 team points (such as recorded by the team) is unknown
  
  the team from round 2 points = 0 if
  etc.
  
  It seems from the example that there are 2 attributes used to the same variable: [team of the Tower, 1 points] and [team of the round 1 points (such as recorded by the team)]. It is not clear to me how the original equation can be concluded if the values are stored in the alternate attribute [points of the round 1 team (such as recorded by the team)] etc.
  
  I have also considered using fragments of rule by the help topic "Prove an attribute using multiple rules", while I could use two equations separated to set the value of an attribute according to the circumstances, that is to say:
  
  assign 1 = A + B + C
  
  1 = 0 if attribute
  attribute 1 is unknown
  
  This attempt results in a logic loop error, probably because I am trying to set the value of an attribute based on the same attribute value.
  
  Any help will be greatly appreciated!
  Philippe

  Hi Philippe,.

  I suggest the following way to solve this problem, although there are other ways too.
  You can use a table of rules for it.

  Open a Working Document, and then press 'Alt + Z' created a rules table.

  Use the following rule: -.
  Keep the text in bold in the left-hand column and the text in italics as a condition for the title in the right column. Use a correct indentation during the compilation of the rules.

  -------------------------------------------
  Attribute 1
  -------------------------------------------
  *0*     any
  A is unknown or

  Uncertain East
  and
  any
  B is unknown or
  B is uncertain
  and
  any
  C is unknown or
  C is uncertain
  ----------------------------------------------
  Has any     
  B is unknown or
  B is uncertain
  and
  any
  C is unknown or
  C is uncertain
  ----------------------------------------------
  A + B C is unknown or     
  C is uncertain
  -----------------------------------------------
  A+B+C in the opposite case     

  Thank you
  Sofiane

• Keyboard shortcut for the Spot removal tool

  With my previous version of LR (2.1), I was able to turn the spot removal tool using "N" on the keyboard.  With 3.3 that strikes "N" while the removal tool the cash is active has sent me to the library which I think is a form of disabling, but not the one I'm used to.

  Changed the shortcut for this tool?

  Mac OS x (latest version), LR 3.3

  johnbeardy wrote:

  Q

  ... as described here:

  

  Beat

• HFM 11.1.2.3.00 view Journal issue for the non-administrateurs

  I have a native user of test that has the selected roles...

  • Approve journals
  • Read journals

  When I connect with this user and access management magazines, newspapers do not appear.

  The only way I can get the newspapers to appear is if I'm the administrator user.

  In previous versions, this type of role setting worked.

  What was also required to work in this version?

  Hello

  I think there is a problem with the security classes.

  In the user guide by: to edit a log, you must have all access to the class of security for the newspaper. To publish a newspaper, you must have all access for classes of security of all dimensions in the detail rows that use the security classes.

  Kind regards

  Thanos