Poor black duplex on even pages with HP7210

Similar Questions

• HP CP4525DN print black all over the Page

  Hello, I have a HP CP4525 that prints black all over the page with the exception where there are printed words.  I reinstalled the fuser unit and tried to swap black ink.  It's a brand new printer from the box.  I have attached a picture of one of the printing as kind of hard to explain what the question.

  Any help would be appreciated.

  Edit - added an another attachment with the print quality test pages

  Has started sharing a printer of spare parts in another office.  Turns out be the formatter Board.

  Thank you.

• When I open a page in firefox there is nothing on it just a black page with no address bar or whatever it is

  When I open a page in firefox there is nothing on it just a black page with no address bar or whatever it is

  Currently in version 33, Firefox has implemented a new faster way to loading Web pages. This new feature is called OMTC. However, there are still tweaks to the Mozilla developers make this.

  There is a known issue that Mozilla works very hard to fix: If you have black pages on some sites, here's what you can do to avoid the problem in the meantime:

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  To disable hardware acceleration

  • Click the menu button

    

    then select Options.

  • In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.

  Now, quit Firefox, wait a few seconds and start normally.

  Please let us know if this solves the problem. Engineering is also collecting more information on the question would require that you fill out this survey

  Thank you!

• Unable to turn on the window Defender, even after that I click on activate the defender of the window. THA page with the tool does not appear...

  Unable to turn on the window Defender, even after that I click on activate the defender of the window on my window vista home premium... The page with the tool does not appear...

  If you have
  one of the following AV, antivirus, programs installed, it will stop your
  Windows Defender. Purpose of these AVs have their own advocates. 2 defenders
  on the same machine will create conflicts.
  Bottom line: it's ok.
  It's normal.
  List of AVs which will stop Windows Defender

  Norton
  McAfee
  AVG
  Microsoft Security
  Essentials

  If you do not have the
  above AV programs, here's how to do to restart Windows Defender:

  Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows
  Defender > click Properties > to
  Startup type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• How can I change the color of the cloth? I tried right click changed to black, gray and even blue but it is still white and mixes with the artboard

  How can I change the color of the cloth? I tried right click changed to black, gray and even blue but it is still white and mixes with the artboard

  It should be present.

  

• Black line through all pages HP Officejet 8500 A909a

  We've had this printer for some time at the office and not even a week ago, he started printing with a black line across all pages. Normally, that would be a problem with the head of the cleaner. FAKE! He is not the head of the cleaner. It will print the computer without the black line, and when something is printed glass monitor it won't be a black line in my documents. The only time where it appears is when I print copies of the Lac. It also occurs when we fax some of our documents to some of our major customers and businesses.

  We NEED this to work. What could be the problem? It must be well fixed as SOON AS POSSIBLE! It is urgent that I get a response on what I can do for this printer. Faxes should be sent each day of our office. I have just files accumulate on my desk. Help!

  Thank you!

  There is a small section (about 1 "wide) of glass which is used for the ADF to scan.  It's just to the left of the main window, see this post for more details.  A stain on the glass turns into a line, as the paper is fed through the document feeder.  This section of cleaning should solve the problem.

• page is frozen a white page with pink ribbons

  I can't get to my mail at all the page is blocked on a white page with stripes pink if I close it and reopen it goes right, return to the page even if I restart it goes back to the same page I tried 2 times to uninstall and reinstall thunderbird and even the remains of light page.

  This happens in Thunderbird safe mode?
  In Thunderbird
  Help > restart with disabled addons

• Using the MF and the "open a new tab" + sign opens a new page with a list of site visited recently, which is a very useful tool. It works fine on my two desktop computers, but

  Using the MF and the "open a new tab" + sign opens a new page with a list of site visited recently, which is a very useful tool. It works fine on my two desktop computers, but I can't it to work on the laptop.

  I downloaded "New tab Pro" on the laptop (do not even see on desktop computers so don't think about) such that she was like the real deal but nope... do not work. Running the latest version of MF, ideas on how activate it please?

  Thank you guys are going to mark as 'resolved' BTW it is no "folder on the desktop named old data from Firefox. Hmmmmmm.

• HP Officejet Pro 8600: Vertical black line scanned single pages and copied

  The machine is about a year and treats a low volume (less than 100pgs/mth on average between pages sent from the computer, copying and scanning). Pages sent from the computer continue to print well, but for the last scan of the month or copy functions always produce pages with a thin (1 mm?) black vertical line in the middle of the page.

  Have cleaned the glass several times but no joy.

  Solution (s)?

  THX.

  Followed all the steps in case a link down to "shine a flashlight on the glass" and the flashlight revealed a tiny particle not detected previously, glued to the glass despite several cleanings. Once deleted, the line has disappeared. Thnaks for the end of the flashlight.

• Pages with "GET /DevMgmt/Discoverytree.xml HTTP/1.1" unwanted printing on HP 2055dn

  Print pages with GET /DevMgmt/Discoverytree.xml HTTP/1.1

  Host: xxx.x.x.x:xxxx (IP address

  It comes from occurring with HP LJ 2055dn

  Anyone know how to PREVENT what is happening in order to avoid the waste of paper?

  There are a LOT of people posting on this problem WITHOUT help from HP support online!

  Common problem: using Win7 (32/64 bit) version with current driver from CD.

  Install the latest driver from HP.com does NOT solve the problem!

  Any ideas?

  Thank you!

  Here is how I solved the problem, at least for me

  -Goto printer and select HP 2055dn (currently using "PCL6" pilot)

  -Right click and select "printer properties".

  -Goto "the device settings tab.

  -The "Installation Options" settings Goto

  -Duplex: installed

  -Notification of printer status: DISABLED CE IS PROBABLY THE CULPRIT!

  Press 'OK' to accept!

  This solved the problem, at least for me

  Good luck!

• Script dynamic Page numbering does not work on pages with engineered?

  I work in Acrobat Pro XI on a document of 4 pages with a button that allows a page template will be inserted after page 3.  I created a button for this, and it works fine.  But each page has a text field that is supposed to automatically update all the page numbers.  The code looks like this:

  Event.Value = "page" + (event.target.page + 1) + "of" + this.numPages; ""

  calculateNow();

  On the four pages visible when the file is opened it works perfectly; they will update "Page 1 of 4" to "1 of 5", etc. without any problems.  However, the inserted template pages are very random.  Sometimes the firstbegotten will work and say Page 4 of 5, but sometimes he will say Page 0/4.  It is worth noting that even when he says Page 4 of 5 print this page shows that this saying Page 0 out of 4 again.  And all additional pages triggered after which lists a bunch of random numbers on the right number of pages.  So it will look like "Page 7, 6, 5, 4, 31 9.

  I search by a large number of questions already asked and have not seen enough.

  If you want to add a new page with each press of the button, you can simplify the code:

  getTemplate("Addittional_Collaborators").spawn (numPages, true, false);

  but you need to add code to define correctly the ' page x of y "field values. Post again if you have trouble with this part.

• How to print a book on both sides of the page with the zoom.

  Hi I have a book of 100 small pages in book format and I want to print this book on both sides of the paper with two pages per side.

  I use windows XP and adobe acrobat reader XI version greater than 11.0 and an old printer.

  I tried to do and print two pages on one side by selecting multiple option in the layout, but there is no zoom I mean very tiny were printed and the remaining space was wasted.

  Then in order to print the even pages on the one hand and the odd pages on the other side, I tried to print the odd pages first in vain, I mean that all pages have been printed by also including the odd pages.

  For this I followed the instructions on the next page

  http://howtoprintdoublesided.com/how-to-print-double-sided-PDF/

  Please suggest how the two above can be carried out at the same time.

  Kind regards

  Rupesh.

  Hi Rupesh,

  To print the file to the scale, you can set the value in % in the impression under custom scale option dialog box.

  For double-sided printing click the properties button next to the printer you selected.

  Here you will get all the print properties that a printer supports.

  You can choose to print both side if it is available.

  Thank you

  Abhishek

• When I click on the download button opens a page with three small boxes, and I think that this means a wait, but they lasted more than two hours, unfortunately and I tried many things and each time gets the same, I work now want photoshop required a

  When I click on on the download button opens a page with three small boxes, and I think that it means a wait, but they lasted more than two hours, unfortunately and I tried much and each time gets the same thingit's working now, I want photoshop necessary and reminders even when I tried to buy the same thing happened to me Please I want to a quick solution

  Make sure that you have enabled cookies and clear your cache.  If he continues to not try to use a different browser.

• Hi, how do I change the orientation of the page with headers and footers for facing pages

  Hello

  How to change the orientation of the page with headers and footers for facing pages in CS5

  Turning the page is only for the formatting of data - the page is not literally transformed for printing.

  In most print even if the pages of a book are enabled for the landscape, the header and the footer are still in the same position.

  If you need pages in landscape mode with headers and footers in a different location - you need to do these pages in the section "Master Pages" of the Pages panel

  Then apply these new Master Pages to the pages in your document.

  http://helpx.Adobe.com/InDesign/using/master-pages.html

  Note - it is not usual to have a different orientation for the headers and footers.

• Panel problem? My Sony 46 Hx750 shows a black cross in the Center with bright quadrants

  My sony 46 hx 750 shows a large black cross in the Center with quadrants.IS slightly glossy cela a normal feature. This is not seen with ex650 I checked with my friend. This is seen in a dark room with all entries without a signal to HDMI input even. I'm amused if the LED panel is already dead. TV was purchased 1 month back. Bright rooms, it doesn't, someone told me it is sign of death of the LED panel.

  Have any problem with an image? Maybe an effect due to the no signal? Try it on a blakc a white film.