Pages with "GET /DevMgmt/Discoverytree.xml HTTP/1.1" unwanted printing on HP 2055dn

Print pages with GET /DevMgmt/Discoverytree.xml HTTP/1.1

Host: xxx.x.x.x:xxxx (IP address

It comes from occurring with HP LJ 2055dn

Anyone know how to PREVENT what is happening in order to avoid the waste of paper?

There are a LOT of people posting on this problem WITHOUT help from HP support online!

Common problem: using Win7 (32/64 bit) version with current driver from CD.

Install the latest driver from HP.com does NOT solve the problem!

Any ideas?

Thank you!

Here is how I solved the problem, at least for me

-Goto printer and select HP 2055dn (currently using "PCL6" pilot)

-Right click and select "printer properties".

-Goto "the device settings tab.

-The "Installation Options" settings Goto

-Duplex: installed

-Notification of printer status: DISABLED CE IS PROBABLY THE CULPRIT!

Press 'OK' to accept!

This solved the problem, at least for me

Good luck!

Tags: HP Printers

Similar Questions

  • Pages with "GET /DevMgmt/Discoverytree.xml HTTP/1.1" unwanted printing on Laserjet 2015b

    I have a HP Laserjet 2015 d in WIN7 (32 bit) with a USB connection.  I keep getting unwanted with pages printing:

    "GET /DEVMgmt/Discoverytree.xml HTTP/1.1".

    "Host: 127.0.02:8080".

    I found similar positions to the other HP LaserJet but their repair method did not work for me, because I don't have an option "Printer Status notice" which is noted below.

    --------------

    (repair method mentioned in another post for the 2055dn printer)

    Please click on start-->

    Printers and devices-->

    Double-click the printer (PCL 6)

    Double click on customize your printer

    Click device settings, and then check the list and together following: -.

    Notification of printer status: DISABLED

    Apply

    Ok

  • prints a page with "GET /DevMgmt/DiscoveryTree.xml HTTP/1.1 Host: 127.0.0.1:8080".

    I have 2 HP Printers, HP 6600 - no problem!  and main printer HP Color LaserJet 1515n

    This printer is in a limited network, and each print job, at the end of the job, print a separate page with the following:

    "GET /DevMgmt/DiscoveryTree.xml HTTP/1.1 Host: 127.0.0.1:8080".

    HOW ON EARTH CAN I GET RID OF THIS AND THAT WHICH IS THE CAUSE?

    Tony [personal information deleted]

    Paul, to solve this problem, you must disable the "Notifications of State printer" in the printer driver settings.

    To do this, assuming you are using Windows 7, the first thing you need to do is to go into your control panel.

    Once there, select 'View devices and printers' under 'hardware and sound '.

    Right-click your printer, and then select 'Properties' or 'printer properties '.

    Select the "Device settings" tab and you should see the option to turn off 'notifications of State printer '.

    If I was helpful, or if you want to say thanks you can click the White Star under my name to give me congratulations.  I really appreciate it!
  • CP1515n, print a report after each print job "Host IP & GET/DevMgmt/DiscoveryTree.xml HTTP/1.1"

    Hello

    I have a HP color laserjet CP1515n. every time I give a print job prints a status page with two lines just like this

    "GET/DevMgmt/DiscoveryTree/.xml HTTP/1.1".

    "Host: 127.0.0.1:8080".

    I tried to disable it, but I am not able to to please help as it is using paper and ink at the same time.

    Thanking in advance

    Naeem

    Hi ANM

    Thanks for the post.  With this error, I was able to locate a previous thread that addresses this problem.  I've included this link below.   Good luck!

    Mr.Mojo thanks for the information!

    http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/unwanted-pages-printing-with-quot-get-DevMgmt-Discoverytree-XML/TD-p/863739

  • More on unwanted Pages print "GET /DevMgmt/Discoverytree.xml HTTP/1.1" on HP 2055dn

    I have this same problem with my new P2055dn.  I have studied the problem.  What happens to any driver that I use.  (I now have three people on board, each fully updated.  They are universal, PCL 6, PCL 5 v.5.4, so Microsoft XPS Document Writer).  I also disabled reports in the printer menu.  Yet, I get this printed page several minutes after each print job is finished.  I am running Windows XP.  I really hope that someone can help;  It seems really stupid, and I don't want to have to live with it!

    Problem seems to be resolved.  I use the universal driver (No PCM 5 or 6), with reporting disabled.  This is the configuration that I got when I wrote my original post.  I wrote because the printer DID print that report sheet at least once and maybe twice, with this configuration in place.  Multiple print jobs is completed since then, without any additional reports ongoing print!

    Given my experience, I suspect that other users will benefit from reviewing the several threads available on this topic.  HP, you must fix this so that the printer works out of the box!

  • GET printer error /DevMgmt/DiscoveryTree.xml

    Anyone received this error message, the /DevMgmt/DiscoveryTree.xml you GET printer? I have a HP Color LaserJet CP2025n

    If you're still having problems with printing on both sides, try this:

    Devices and printers, click the P2055dn icon, the printer's properties device settings tab.  Scroll to the duplex unit.  If it is set to not installed, click the sentence not installed then installed in the menu dropdown.  Press OK.  After you have selected the print for a specific job, select properties and change print on both sides from no to Yes, lift on or toward Yes Flip.  Most users know to do this last step, but the choice is only there if you have set the duplex unit to installed.  I got this solution a post in another forum.  Good luck.

    I am still among those who cannot get the Toolbox and get GET DevMgmt error message, but I can print duplex!

  • problem opening document pages. Get the message: the requested index.xml file is missing.

    I can't open the document 'Pages' and get "the index.xml file required is missing."

    You should post the related issues of Pages in the Pages for Mac community support.

    You try to open a document v5 Pages in Pages ' 08 or 09 ' which does not support the format of document Pages v5. Exit your application Pages ' 08 or 09 ' and then double-click the document even have it open in Pages v5.

    When you are in Pages ' 08, ' 09, or same v5, the red light on the title bar of the document just close the current document and fails to complete Pages.

  • Can I REALLY print web pages with ePrint?

    I want to buy an ePrint printer. I know that I can print static web pages with my iPad via ePrint.
    But can also print dynamic web pages, or pages that I see after my login on my bank account?

    Example of dynamic web pages: http://drawisland.com/ or https://www.draw.io/
    Go to this page and draw something. You can print it via AirPrint?

    Thanks for any help or advice!

    Hello

    Did you ask an Airprint printer? For locations above, Yes. Any printer can print, but not all printers can use Airprint. One thing I want to mention here, printer will print the ENTIRE page. They allow you to save the drawings, you can save and print later.

    Kind regards.

  • How to create the validation for a composite primary key feature when I use create with operation of parameters to pass values to a page (i.e. the ADF table) to another page I get this error, how can I solve it. Please help me any one ASAP?

    Hello

    I have a page with adf faces table, I need to pass values to the table to another the inputfields page (both fields are composite primary keys), I'm passing values but I get the error while I'm passing values twice on the next page with a button command (using setPropertyListener) this error... Please help me?

    Houston-29114 ADFContext is not configured to process this exception messages. Use the code of exception stack trace and error to investigate the root cause of this exception. Root cause error code is Houston-25013. Error messages settings are {0 = oracle.jbo.Key [22 9]}

    ADF_FACES-60097: for more information, see the error log of the server for an entry beginning with: ADF_FACES - Exception during the PPR, #1 60096:Server


    The error log is...


    URL - target http://127.0.0.1:7101/Recruting-ViewController-context-root/faces/login.JSPX

    < ViewHandlerImpl > < _checkTimestamp > Apache Trinidad runs with control of activated timestamp. This should not be used in a production environment. See the org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml

    < UIXEditableValue > < _isBeanValidationAvailable > Validation Bean A provider is not present, so bean validation is disabled

    passing the user name: 201157

    < _LogUnhandledException > ADF_FACES - 60098:Faces life cycle receives exceptions that are unhandled in phase 5 of INVOKE_APPLICATION

    oracle.jbo.TooManyObjectsException: Houston-25013: too many objects correspond to the oracle.jbo.Key [22 primary key 9].

    at oracle.jbo.server.EntityCache.throwTooManyObjectsException(EntityCache.java:608)

    at oracle.jbo.server.EntityCache.handleDuplicateKey(EntityCache.java:617)

    at oracle.jbo.server.EntityCache.addForAltKey(EntityCache.java:1030)

    at oracle.jbo.server.EntityCache.add(EntityCache.java:541)

    at oracle.jbo.server.EntityImpl.callCreate(EntityImpl.java:1141)

    at oracle.jbo.server.ViewRowStorage.create(ViewRowStorage.java:1140)

    at oracle.jbo.server.ViewRowImpl.create(ViewRowImpl.java:461)

    at oracle.jbo.server.ViewRowImpl.callCreate(ViewRowImpl.java:478)

    at oracle.jbo.server.ViewObjectImpl.createInstance(ViewObjectImpl.java:5800)

    at oracle.jbo.server.QueryCollection.createRowWithEntities(QueryCollection.java:1941)

    at oracle.jbo.server.ViewRowSetImpl.createRowWithEntities(ViewRowSetImpl.java:2504)

    at oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:2545)

    at oracle.jbo.server.ViewRowSetImpl.createAndInitRow(ViewRowSetImpl.java:2510)

    at oracle.jbo.server.ViewObjectImpl.createAndInitRow(ViewObjectImpl.java:11133)

    at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1342)

    at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2169)

    at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:731)

    at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:402)

    at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)

    at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:210)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at com.sun.el.parser.AstValue.invoke (unknown Source)

    at com.sun.el.MethodExpressionImpl.invoke (unknown Source)

    at oracle.adf.controller.internal.util.ELInterfaceImpl.invokeMethod(ELInterfaceImpl.java:173)

    at oracle.adfinternal.controller.activity.MethodCallActivityLogic.execute(MethodCallActivityLogic.java:163)

    at oracle.adfinternal.controller.engine.ControlFlowEngine.executeActivity(ControlFlowEngine.java:1091)

    at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:982)

    at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:880)

    at oracle.adfinternal.controller.engine.ControlFlowEngine.routeFromActivity(ControlFlowEngine.java:553)

    at oracle.adfinternal.controller.engine.ControlFlowEngine.performControlFlow(ControlFlowEngine.java:158)

    at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleAdfcNavigation(NavigationHandlerImpl.java:115)

    at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:84)

    at org.apache.myfaces.trinidadinternal.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:50)

    at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:130)

    at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)

    at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:159)

    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1137)

    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:361)

    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:202)

    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:508)

    to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)

    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:125)

    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:468)

    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:468)

    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)

    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)

    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

    at java.security.AccessController.doPrivileged (Native Method)

    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)

    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)

    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)

    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)

    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

    < RegistrationConfigurator > < handleError > ADF_FACES - 60096:Server Exception during the PPR, #1

    oracle.jbo.TooManyObjectsException: Houston-29114 ADFContext is not configured to process this exception messages. Use the code of exception stack trace and error to investigate the root cause of this exception. Root cause error code is Houston-25013. Error messages settings are {0 = oracle.jbo.Key [22 9]}

    at oracle.jbo.server.EntityCache.throwTooManyObjectsException(EntityCache.java:608)

    at oracle.jbo.server.EntityCache.handleDuplicateKey(EntityCache.java:617)

    at oracle.jbo.server.EntityCache.addForAltKey(EntityCache.java:1030)

    at oracle.jbo.server.EntityCache.add(EntityCache.java:541)

    at oracle.jbo.server.EntityImpl.callCreate(EntityImpl.java:1141)

    at oracle.jbo.server.ViewRowStorage.create(ViewRowStorage.java:1140)

    at oracle.jbo.server.ViewRowImpl.create(ViewRowImpl.java:461)

    at oracle.jbo.server.ViewRowImpl.callCreate(ViewRowImpl.java:478)

    at oracle.jbo.server.ViewObjectImpl.createInstance(ViewObjectImpl.java:5800)

    at oracle.jbo.server.QueryCollection.createRowWithEntities(QueryCollection.java:1941)

    at oracle.jbo.server.ViewRowSetImpl.createRowWithEntities(ViewRowSetImpl.java:2504)

    at oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:2545)

    at oracle.jbo.server.ViewRowSetImpl.createAndInitRow(ViewRowSetImpl.java:2510)

    at oracle.jbo.server.ViewObjectImpl.createAndInitRow(ViewObjectImpl.java:11133)

    at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1342)

    at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2169)

    at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:731)

    at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:402)

    at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)

    at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:210)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at com.sun.el.parser.AstValue.invoke (unknown Source)

    at com.sun.el.MethodExpressionImpl.invoke (unknown Source)

    at oracle.adf.controller.internal.util.ELInterfaceImpl.invokeMethod(ELInterfaceImpl.java:173)

    at oracle.adfinternal.controller.activity.MethodCallActivityLogic.execute(MethodCallActivityLogic.java:163)

    at oracle.adfinternal.controller.engine.ControlFlowEngine.executeActivity(ControlFlowEngine.java:1091)

    at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:982)

    at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:880)

    at oracle.adfinternal.controller.engine.ControlFlowEngine.routeFromActivity(ControlFlowEngine.java:553)

    at oracle.adfinternal.controller.engine.ControlFlowEngine.performControlFlow(ControlFlowEngine.java:158)

    at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleAdfcNavigation(NavigationHandlerImpl.java:115)

    at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:84)

    at org.apache.myfaces.trinidadinternal.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:50)

    at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:130)

    at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)

    at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:159)

    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1137)

    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:361)

    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:202)

    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:508)

    to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)

    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:125)

    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:468)

    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:468)

    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)

    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)

    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

    at java.security.AccessController.doPrivileged (Native Method)

    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)

    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)

    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)

    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)

    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

    Hi all, finally I found the solution to this exception.

    I did the following steps to solve the problem.

    1. create a bean and use this method

    public void tooManyObjectsMatchExceptioHandeler() {}

    Add the code in the event here...

    System.out.println ("inside the Handeler");

    FacesMessage message =

    new FacesMessage ("Type your friendly message");

    message.setSeverity (FacesMessage.SEVERITY_ERROR);

    FacesContext fc = FacesContext.getCurrentInstance ();

    fc.addMessage (null, message);

    }

    Now, drag and drop the file above java projects in data controls in the browser of the application.

    2. drag a workflow method call (where u get exception as Houston-25013) and call this method as an activity of the exception handler,

    Now, do a right click on this--> definition of the page method call create or go to definition of the page--> create a link Action method and select the above method in the select and file def page this method call in the workflow then go to properties inspector set out fixed property (here name of activities of method call) u give.

  • How is it when I try to open one of my favorte often visited Web sites I get a blank page with only the word 'false' in the upper left?

    How is it when I try to open one of my favorte often visited Web sites I get a blank page with only the word 'false' in the upper left?

    This just started happening the last two days.  I tried to add the url to my list to activate in Internet Options, also to accept the list for windows firewall. I rebooted and restored.

    It is annoying when I can't access Web sites on my PC.  There is no control parenting, nor is it a reason to be since I'm 57 years old, single, live alone and have no children, and not to mention that this isn't a single adult site. This is an auction site.  The same thing happens on a site of sports too.

    Hello

    Thank you for writing to Microsoft Communities.

    I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

    1. what operating system is installed on the computer?

    2. what version of Internet Explore do you use?

    3 have there been recent changes to the computer before the show?

    Please go ahead and follow the steps mentioned and later a update on the State of the question.

    Method 1: Start Internet explorer with the mode without modules and check.

    Click Start, all programs, accessories, System Tools, and click Internet Explorer (No Add-ons).

    If the problem does not persist in Internet Explorer (No Add-ons), then it is one of the Add-ons at the origin of this problem. Please follow the steps below to locate the problem the weak module:

    a. restart IE normally.

    b. click on tools.

    c. click on Manage Add-ons.

    d. disable add-ons by clicking on them one at a time to highlight and then click Disable.

    e. reactivate modules one by one and check with what add-on, you get this error message.

    f. turn off the add-on at the origin of the problem.

    For your reference: http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

    (For Windows Vista)

    Method 2: How to optimize Internet Explorer:

    http://support.Microsoft.com/kb/936213/no

    Important: Reset Internet Explorer to its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

    Follow these recommended steps and after if you still experience the problem.

  • I get a message that says... your version of internet explore is obsolete to run the latest XML parser. I cannot print with my printers. I have a XP SP3, 5 years old. It's time to upgrade to windows 7

    I get a message that says... your version of internet explore is obsolete to run the latest XML parser. I cannot print with my printers. I have a XP SP3, 5 years old. It's time to upgrade to windows 7

    What version of IE are you using?

    The current version is IE8 - http://www.microsoft.com/nz/windows/internet-explorer/default.aspx

    IE9 (is still in beta).

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • I try to download an application to Grants.gov federal grant package.  I upgraded to the latest Adobe Player and checked the settings of Google chrome.  Whenever I try to download the package I get a blank page with this message: to display the

    I try to download an application to Grants.gov federal grant package.  I upgraded to the latest Adobe Player and checked the settings of Google chrome.  Whenever I try to download the package I get a blank page with this message: to view all of the content of this document, you need a later version of the PDF Viewer. You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html for further support, go to www.adobe.com/support/products/acrreader.html.  Please tell us how to solve this problem.  Thank you, Davis B

    This means that you use the viewer of PDF from Google Chrome, which is not compatible with many PDF features.

    You need to download the file to your local drive and open it from there, or use the Adobe Reader on Chrome plugin: http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  • When I click on Outlook Express I get a blank page with (work in line/connection in the lower right corner. Nothing happens.

    How to get my Outlook Express to work

    When I click on Outlook Express I get a blank page with (work in line/connection in the lower right corner. Nothing happens.

    Folders.dbx is probably damaged.
     
    In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
     
    The path to the message will be very similar to this:
     
    C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data\Identities\ {long string of letters & numbers} \Microsoft\Outlook Express
     
    With OE closed, find the Folders.dbx file and delete it.  Another will be created automatically when you open OE.
     
    Note these possible side effects:
     
    When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. However, understand that you will lose the mail directory structure and message rules will probably have to be edited.
  • When I print I get several pages with a feel a little on all the pages I want to print

    When I print, I get several pages with what I print with a few lines on each page until what I printed is finished.

    mamorse,

    Thanks for the additional info. Lets try to download and execute printing and scanning doctor found here. It may fix a lot on its own, but otherwise it will give us a better idea of what is happening. The weakness of the signal is not likely the culprit (because he worked for a long time) but we can try to change that if other steps fail.

  • In the demo Katies bakery how do you get the direct site of the page with the master (shortened?)

    In the demo Katies bakery how do you get the direct site of the page with the master (shortened?)

    I figured that out it would actually bakery.com Katie to see real live online

    Sent from my iPhone

Maybe you are looking for

  • Cannot use iTunes Pass in my iPad

    I followed the procedure from the following Web site to create the iTunes Pass https://support.Apple.com/en-us/HT203021 I can't find iTunes Pass section after selecting the display Apple ID. How can I use passes with iTunes on my iPad? iPad informati

  • Satellite T230D falls down regularly

    My T230D hangs regularly without apparent reason, three of the four times a day. It has been like this since I bought it. Sometimes when I have no programs running. It is currently running Windows 7 32-bit (Home Premium).Can anyone suggest a solution

  • OR-SCOPE-223409 error

    I got an error in the driver OR-SCOPE (version 4.1.3), using the NOR-5122 digitizer. The error is died in the niScope_SendSoftwareTriggerEdge function. The relevant sequence of commands that I send is: Secret = niScope_Abort (SessionID); Secret = niS

  • Two bad files revealed by sfc scan, how to replace?

    Hey, the summer looking at various other posts and it seems that my scans have found two missing/corrupt files.  I don't know where the good files are located, or where they would be located in windows.  Here is the text of the log analysis of the sf

  • How to change or choose the color of the LED on my XPS 630 façade? Vista Home Premium w / Aero

    I know they are there so I can check them in work and in diagnostic mode.