Poor quality of GPS and WiFi reception, iPhone 6

Similar Questions

• problems of gps and wifi iPhone 6 9.2

  My iphone 6 does not connect to the wifi unless it is less than 5 feet from the router and the GPS can't find my spot.  This has happened since Apple updated the software around the release of the 6s.

  None of the versions subsequent correction of the problem, nor has any troubleshooting discussed in online forums, proposed by technicians apple or carried out by technicians from apple to the store.

  My phone is a few months after its warranty (how convenient for apple) and they would not replace it without paying me $ 280 to do.

  I am a few months since my full upgrade with Verizon, but the lack of GPS and wifi not connecting not caused much frustration and data usage, which was costing money because it does not connect to wifi when the fact of other devices in my apartment.

  This is one of the worst customer experiences I've had with apple.  I'm on the edge of Verizon plan, which allows me to update when I want if I don't care keep my phone or get money to trade it.  I'm two months from own the phone outright, but I will probably go to a Samsung better buy a promotion gift card $ 150 to go to Samsung and trade in my iPhone.  I'm an advocate of Apple for a long time, but clearly widespread lack of solution to this problem is not a good look for a company that built themselves on the convenience and simplicity.

  After two months of headaches, I feel like it's worth to wait until March and I should not have to this fact.

  You have a question or you did he yell?

• Is there a camera without a mirror Canon with a full frame, GPS and WiFi sensor?

  Is there a camera without a mirror Canon with a full frame, GPS and WiFi sensor?

  kenka433 wrote:

  Is there a camera without a mirror Canon with a full frame, GPS and WiFi sensor?

  Canon 6 d has a full frame, GPS and WiFi sensor and can be opertated in LiveView mode mirrorless.

• Support to properties of the device - GPS and WIFI

  Hello, I am developing an application and I would be taking in charge all models of devices with gps and wifi support. Is it possible to get information, if the device supports GPS and Wifi?

  What devices is touch screen, there is a class touch screen and an isSupported() method, which returns false, if the touch screen is not supported on the device. Is there a similar method for Gps and Wifi, too? I searched the web, but I can't find anything about this and I think that's not good filter device names to determine if the application should run or not. I would appreciate a quick response time to the app's short... Thanks in advance.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/832062/How_To _...

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=5752&query.ID=161...

• GPS and Wifi issues

  Hey guys I wanted to do and take into account and post this question because it affects my Pokemon catch capacity:

  My GPS just do not work with precision and not enough fast. I noticed about a year ago when I tried to use the WAZE app for the first time and it does not locate my position accurately enough and it's the same for Apple and Google maps.

  I've never really cared because I rarely travel too far and my GPS worked well enough for me to navigate when I should not rely on a map. Now that Pokémon GO is out which relies on positioning very accurate since some Pokemon can only be captured in some areas, it is really annoying that my phone takes a lot of time to put me in a general situation or fails to find me at all. I know it's just a game, but it's really annoying because it's the first week of release, and all my friends are playing. Seems my GPS only works pretty well to play when I'm more urban areas in my city (perhaps the buildings help focus signals on my phone) compared to parks and suburban more areas. The phone would make my position in the game by tens of metres offshore and sometimes would be me all about teleport to another whole BLOCK!

  I think it may be a hardware problem because I also noticed that my phone started to worsen to pick up WIFI signals as well. I use to be able to walk my business and maintain a good WIFI signal and now it seems that I can hardly connect to my router unless I'm less than 10 feet of it. Around, I read that this could be a short film of either a bad charging cable, damaged by the heat that damage the WIFI and GPS, modules or an update that fried partial systems.

  I checked my router with the new iPhone of others and they had really good reception of the WIFI signal like what I had at first, that's why I think it's a hardware problem. I did a reset, full location Services are on and I tried every solution developers Pokémon GO suggested. While I'm due for an upgrade to another phone soon, being is not able to play with friends and walk around looking for Pokemon cool is a disappointment.

  Any suggestions or ideas on what could be the problem? I even tried to piggy back wifi hotspot a friend to see if I can use their GPS location. No luck.

  Hi FunnyAsianBoy,

  I'm not sure what you mean by "full reset", maybe you have already done this:

  If you want to know for sure if it's a hardware problem, here's what you can do:

  1. backup of the device, of course.

  2 replace the device to its factory settings using iTunes (contrary to "erase all content and settings ' application of the parameters, this will completely erase your phone, operating system included). Instructions: use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory - Apple Support

  3. DO NOT restore from a backup. Set the device up like new. If the WIFI problem is still there (and you have restarted your router at least once), there is a hardware problem. If the GPS problem is still there, but only on cell systems, I'd want to put your SIM card in another phone with the same provider (or put another SIM with the same provider in your phone) to isolate the problem.

  Alternatively, you can call Apple support so that you have access to a Wi - Fi connection. They have a diagnostic test of the material that they can do remotely, and they will do it for free. Of course, it is not as reliable as if you physically go to an Apple Store, but it is very convenient as you can do from anywhere.

  I hope this helps!

  Bakhtina

• Poor quality HP 7520 and horizontal lines

  I recently bought a HP Photosmart 7520, some printed photographs and was very happy with the results.  I was already part of a series of photographs printed approximately two weeks ago and decided to print another.  The result was poor with horizontal lines, getting more lowest wide printing.   I feel like a sheet of foolscap.  I went in thinking tests align printer and print quality verification and they looked very good.  Another test print is perhaps worse.

  The printer reports that my ink black print, not the photo, became weak.  All the other inks were very good.

  I checked your question and answers and therefore decided to uninstall and reinstall the printer I have this week had an upgrade to broadband and thought that there is a problem.  This task achieved I did the self test as requested and the result was first class, but it was of course on the smaller size paper.

  An impression more away from the same photograph was worse before she looked like a negative, but in color and with only skin correct tones.

  I would appreciate your help as I just upgraded to print photographs as old man... was excellent for doing everything else.

  Hi Salty39,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear that you are having problems with the print quality of your print output.  I see that you said that you have recently purchased this unit. I was wondering if you are still using the configuration supplied with the printer cartridges? If so, please note that these ink cartridges are designed only for a limited number of printing just to set up the printer and if you do photo printing, photo, use a good amount of ink. Please also note that HP printers have built in surge protector and if you have the printer connected to a power strip/bar, the printer will not get all the power it needs to function properly and cela could be another reason why you are having quality problems. Here is a document that explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Please respond with an operating system that you run and I'll be happy to find more resources about it if the steps that I have outlined have not solved the problem.

  Operating system Windows am I running?

  Mac OS X: how to find which Mac OS X Version is on my computer?

  Thank you for your time.

• Question: Poor quality after rotation and can not play on QTime/RealPlayer

  I use EPA, 11 that I just bought and installed. I imported a file (about 600 MB) .avi created on my camera and then turned after the scaling.  I also applied Smart Fix. Two problems: 1. the quality is distinctly inferior to the original and 2. For editing, I don't have an option to select a format that can be played by Qucktime or Real Player. The published file is only about 110 MB. I'm new on this and can't find the answer yet. Thanks Julienl57

  Return on what asked hunting...

  Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037

  What is a CODEC... a primer http://forums.adobe.com/thread/546811

  What CODEC is inside of this file? http://forums.Adobe.com/thread/440037

  .

  A report with the codec of your file details, use the programs below... a screen capture works well for people to SHOW what you do

  http://forums.Adobe.com/thread/592070?TSTART=30

  .

  For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

  For Mac http://mediainspector.massanti.com/

  And some general reading...

  Http://help.adobe.com/en_US/premiereelements/using/index.html user's Guide online

  -Download PDF page current http://helpx.adobe.com/premiere-elements.html

  Import video http://forums.adobe.com/thread/1065281

  - and http://forums.adobe.com/thread/1112086 of the project settings

  Shared savings & http://forums.adobe.com/thread/1137128

  -Sharing of DVD or BluRay http://forums.adobe.com/thread/1137645

  -Sharing for movies http://forums.adobe.com/thread/1051093

  -Sharing of computer http://forums.adobe.com/thread/1058237

  Steve tutorials... basic training steps are the same for several versions

  -http://forums.adobe.com/thread/537685

  -v11 http://www.amazon.com/Muvipix-Guide-Premiere-Elements-version/dp/1479311200/

  FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq

  ADVICE http://forums.adobe.com/community/premiere_elements/premiere_elements_tips

• Poor quality photos iPhone 6s

  My iPhone 6s camera is taking pictures of poor quality, it is as if it was still dirty, clean it up and photos are of better quality, however, it does not last too long because I have to clean the camera whenever I want to take the picture, thank you!

  The unit is still under warranty. Make an appointment at the Genius Bar at the Apple Store nearest to have the material examined.

• When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  The iPhone's battery is fully charged?  Otherwise, load it, and then try again.

  If it is busy, go in recovery mode as explained here.  You may need to try to get into the mode of recovery once more to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• I recently updated my iPhone to iOS 9.3 6s and now my data and wifi are in place. Now I can't open the apps and send messages with data and barely on the wifi. I've tried everything, and it still does not work.

  I updated my iPhone to iOS 9.3 6s today and now my data and wifi are in place. Whenever I try to open an app or send text messages with data it does not at all. And with wifi, it just works. I tried just like turn roaming off and off and other lte but nothing seems to work at all. Can someone please?

  I have this same problem too, it really gets me upset

• HP Envy 4500: HP Envy 4500 printer and access Wifi University / iPhone Wifi Hotspot

  I have a HP Envy 4500 home and signed up for the moment of ink.  Works very well and I was hoping for a similar arrangement for my daughter who has just started at the University.  It seems that there are problems with the HP Envy 4500 connection to University share wireless networks.  I was wondering if the following scenario would work:

  1. his computer is connected to the printer via the USB port
  2. the printer is connected to a hotspot wifi on iPhone (his phone is already connected to wifi University)

  This work of the printer relay information support to HP for the purpose of instant ink?

  Thank you very much

  It worked so might be a good work around.
  
  Thank you

• My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  settings - phone - call another device - off.

  One of you should get their own apple ID, you just go to have problems later.

• Alignment page prints of poor quality and fails the test on 4500 G510n alignment

  Windows 7 installed new color and cartridges b & W.

  Open Hp Solution Center - cartridge to align the State indicated

  Cartridge to align selected and a page prints.

  Poor quality. only 3 small red arrows at the top and 4 rows of blue rectangles on background.

  Place this page in reverse on the press and the OK scanner glass.

  Scan the product and the message on the window of the printer "alignment Page not detected."

  Error message in the solution Center "alignment failed".

  I tried several times to cleaning cartridges. Tried the alignment several times page reprint. The same problem.

  Hello Sugarlew,

  It can be several things, the origin of the problem you are experiencing. Here is the troubleshooting article that solves the problem you are experiencing. One of the steps should help resolve the problem.

  A "alignment page not detected ' or"Alignment failed"Error Message is displayed on the control panel"

• Poor quality and poor framerate with best export settings

  Hello, this is my first post, I searched the forums, watch videos on youtube, etc, but don't never came across something like this before, but anyway let's get down to the heart of the problem at a time!

  I am currently using Adobe Premiere Pro CS6 (Version 6.0.2)

  Specifications of the PC

  -Intel Core i7-4720HQ CPU @ 2.60 GHz

  -16 GB OF RAM

  GTX - 960 M graphics card

  The problem:

  I have been using CS6 6 months now and not had a problem since day one.

  The videos that I do are gameplay videos captured at 60 fps 1080 p with 36857 Kbps Total bitrate.

  The videos where export with large 60 fps framerate, quality, as it should in the first place.

  But everything changed one day after I did everything with the same agenda, as I did each time and video when exported was of poor quality and the rate was 30 frames per second.

  BUT, when I am trying to check the properties of the video exported, everything is as I put is on the export settings, even if the vacuum has dicreased quality and bad frame rate (30 fps) up.

  I am exporting as follows:

  -Format: H.264

  -Basic video settings:

  -Width: height of 1920 1080

  -Frame rate: 59.94

  -Order of fields: Progressive (it doesn't let me change it)

  -Appearance: Square Pixels (1.0)

  Tv - standard: NTSC

  -Profile: high

  -Level: 4.2

  -Rendering to maximum depth (verified)

  Flow settings:

  -Bitrate VBR, 2 pass encoding (I also made 2 pass, but had the same effect)

  -Target speed [Mbps]: 36,82

  -Maximum Bitrate [Mbps]: 62.5

  Advanced settings:

  -Key Frame Distance 72 (verified)

  Use maximum quality rendering (verified) use Previews (verified)

  I finally understood everything!

  So when I started the project for some reason, I had chosen under the option 'Make and video playback' Renderer: Mercury Playback Engine GPU Acceleration (CUDA) instead of Mercury Playback Engine GPU Acceleration (Open CL).

  After that everything worked perfectly as it should in the first place.

  Thanks to everyone who tried to help me understand my annoying error!

• Three large cards printing sites mean #77458900 picture is of poor quality and try a higher quality image. How can I get my money back?

  Three large printers including said Vista image

  #77458900

  is of poor quality and do not use. I tried anyway and they deserve it so bad pixalated and was totally unusable. How can I request a refund?

  Hi Joy,.

  I am a member of the Adobe Stock Quality Engineering team, can you tell me how you download this file and what program you use to view? I will gladly give you a credit for the image, but I could use your help with these issues.

  EBQ