Population of trigger of the field dependent on the loading of the page

Similar Questions

• Manager not an event trigger in the field display name of the user registration form

  Hello

  I want to customize the display as name lastname.first name field in the user registration form.

  so i have creates a process Manager field events, but this isn't the trigger to the full name field, he demonstrated error ion Orchestra.

  But even when I went with first name , it's showing form name.first perfectly.

  can anyone help me on that there is any event triggered default and does not allow to create a custom event on the display name field.

  Thank you

  Display name must be placed in a Hashtable as follows:

  Map dispNameMap = new HashMap();
  dispNameMap.put ("base", lastName + "" + firstName); then pass this card as:

  Parameters.put ("Display Name", dispNameMap);

• Why is the release of the trigger on all fields in a table?

  I have a trigger, and the text is the following. The trigger should write just the emplid in the PS_DM_ADDR_CHG_EMP table whenever there is an update to the fields
  Street1, street.2, STREET3, CITY, STATE, ZIP, COUNTRY in PS_PERSONAL_DATA. But some how it is written emplid in the PS_DM_ADDR_CHG_EMP, when everything starts on any field of the more than 50 fields of the table PS_PERSONAL_DATA. Is there a reason why this happens. I looked in all the other triggers and none of them wrote something on this Board I found a trigger on PS_PERSONAL_DATA for an insert or update or delete on all fields and it uses insert into another table. I couldn't see any other triggers associated with the table PS_PERSONAL_DATA. So, how to diagonize the question of finding what is originally to write the data in the custom table.
  CREATE OR REPLACE TRIGGER HT0P. PERSDATA_RAU
  AFTER UPGRADING FROM STREET1, STREET.2, STREET3, CITY, STATE, ZIP, COUNTRY
  ON PS_PERSONAL_DATA
  REFERRING AGAIN AS NINE OLD AND OLD
  FOR EACH LINE
  DECLARE
  v_Emplid ps_personal_data.emplid%type; -Used for the storage of EMPLID
  BEGIN
  v_Emplid: =: old.emplid;
  UPDATE ps_dm_addr_chg_emp one
  SET a.emplid = v_Emplid
  WHERE (((a.emplid = v_Emplid) and (v_emplid) length = 3))
  or ((substr (a.emplid, 1, 3) = substr (v_Emplid, 1, 3)) and (v_emplid) length = 4 and substr (v_emplid,-1, 1) to ("B", "C", "I, 'K', 'P', 'U'))
  or ((a.emplid = v_Emplid) and length = 4 (v_emplid))
  or ((substr (a.emplid, 1, 4) = substr (v_Emplid, 1, 4)) and length (v_emplid) = 5 and substr (v_emplid,-1, 1) to ("B", "C", "I, 'K', 'P', 'U'))
  or ((a.emplid = v_Emplid) and length (v_emplid) = 5)
  or ((substr (a.emplid, 1, 5) = substr (v_Emplid, 1, 5)) and length (v_emplid) = substr (v_emplid, 1, -1) and 6 in ("B", "C", "I, 'K', 'P', 'U'))
  or ((a.emplid = v_Emplid) and length = 6 (v_emplid))
  or ((substr (a.emplid, 1, 6) = substr (v_Emplid, 1, 6)) and length (v_emplid) = 7 and substr (v_emplid,-1, 1) to ("B", "C", "I, 'K', 'P', 'U')));
  IF SQL % NOTFOUND THEN
  INSERT INTO ps_dm_addr_chg_emp (emplid)
  VALUES (v_Emplid);
  END IF;
  END;

  Hello

  It would be helpful if you could post code formatted using

   tags. Learn more from FAQ
  
  To test your trigger - You may want to create a temparory table and have an insert statement for the temp table in your trigger and test it by updating other columns of your main table. 
  
  Also you may want to ensure it is not the UPDATE statement which is causing the trouble for you by updating some unintended rows...
  
  Regards,
  Rakesh                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
  

• What is the trigger of the IOM process?

  What is trigger in IOM process? Please explain briefly? How to create the trigger custom?
  
  
  Thank you

  What is the trigger of the IOM process

  He decided to "what tasks must get triggered on the evolution of the field in the IOM user profile." Logic is already implemented in IOM and this requires a small configuration to add new triggers.

  Just to add a little thing in the commentary of Suren:

  You will find entries as in the research

  USR_LAST_NAME - Name of the task (task any name)

  It means so whenever there is change in the user's last name (USR_LAST_NAME) in the IOM then it will trigger all these tasks that are mapped in the search. You can have more than one task for the same domain.

  USR_LAST_NAME - Task1 (any task name)
  USR_LAST_NAME - Task2 (any task name)

  Suern shared the steps for the creation of new triggers.

• make image change depending on what the words are clicked without reloading the page

  So I got ideas for my web page laid out and I finally started to build it and got stuck in a field. I wanted to make two boxes side by side... a text and the other with only the large images that changes depending on what text in the other box is clicked. I wanted this to happen without the page loading in fact once again. I saw something similar to it on ensmp.fr below the navigation on the left. I don't know this is a kind of script that I'm not familiar with, but if anyone has any ideas on how to do this please let me know. Thank you.

  Behavior of SetText of DW is a way to get there. By clicking on a word in
  the text box to rewrite the HTML code in the area of the image to load a new image.
  Perhaps more simply, this would also be very easy to do with Swap Image of DW
  behavior. Click the text, and this image swaps into another image.

  Do some homework by studying two of these behaviors and what you can do
  with them.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "This is a test" wrote in message
  News:g74ndu$SOH$1@forums. Macromedia.com...
  > Then I got ideas for my web page laid out and I finally started
  > construction
  > It and got stuck in a field. I wanted to make two boxes next to each
  > other...
  > with the text and the other with only large images which changes according to
  > what
  > text in the other box is clicked. I wanted this to happen without
  > the
  > actually load the page again. I saw something similar to it on
  > http://www.barackobama.com below the navigation on the left. I'm sure he
  > implies some kind of script that I'm not familiar with, but if someone
  > has it all
  > ideas of how to go about doing this please let me know. Thank you.
  >

• What is the icon on the far right that looks like a circle and a small number that changes depending on the page of the site? in the lower right part of the

  I wonder what this thing.
  It's an icon to the far right of the page next to the search toolbar. It has the shape of a circle with a number on the bottom right edge. The number changes depending on which tab I opened. A blank tab has no number. This page gives a 1. I have another open page which translates as a 4. The number shows white in a little orange box. The circle is described with a thick black line. What does this icon?

  Thank you.

  John

  Hi John, I'm guessing that this icon is created and updated by an extension. I do not know that, though. Maybe something that keeps track of the Tracker, like Lightbeam? Have you tried pointing your mouse over the icon to see if a ToolTip is displayed, or by clicking on it?

• Trigger on the first attempt

   I'd like some help / advice on my LabView program (attached) please. In the VI, the MyVoltageTask_1 is configured as a voltage signal corresponding to a pressure change inside an enclosed cylinder. The signal is transmitted to the BNC 2110 DAQ board / PCI 6133 DAQ card via a differential pressure transducer. 
  
  Ideally, the program should trigger as soon as I let air into the cylinder and start acquiring data, and stop as soon as its done. However, LabView does not trigger when I let the air into the  cylinder on the first attempt, but if I exhaust the air and let it in again a second time, the program triggers and I can see a graph of the pressure trace. Please let me know if there is something I should / could change in the program to have the program trigger on the first attempt. Thanks!
  

  Have you try to change the slope falling upward? I begin to take a look at shipping the first examples. "" "Open Finder for example of OR and go to hardware input and output" DAQmx "analog measures" voltage. Take a look to the example called "Acq Cont & chart voltage-Int Clk - Analog Start.vi ' I contains the basic structure of what you're trying to reach.

• How to generate a trigger when the arbitrary

  Hi all

  I have a digital output pci card 6534 and an analog output pci card 6723.

  I would like to generate a material long pulse sequence timed. The 6534 has 32 MB memory on board, so it is good to do a long sequence. The 6723 will run out of memory if started at the same time. I would therefore trigger the 6723 at a later date. The boards are connected with rtsi.

  I see 3 ways to do (well that I know how to do, but the first two would be more elegant):

  (1) generate a sequence of digital pulses on ports (i.e. how that), then convert a line of port online rtsi (don't know how to)?

  (2) generate a trigger to the arbitrary point on the rtsi lines (don't know how to)?

  Go 3) with 1) physically connecting a port to a line PFI on the analog card.

  I have not found a way to send a trigger at some arbitrary point with the RTSI. Instead of this I went with solution 3) and related digital outputs analog card PFI channels.

• DAQ trigger on-the-fly reconfiguration

  Hello

  What is the correct way to reconfigure a data acquisition on the fly?

  Every 100 s I'm doing a 2000 point 4-channel triggered acquisition (sampling rate 50000)

  As a function of household, that I also want to monitor the voltage of one of the channels so that every 2 s, I do a single-point acquisition no trigger.

  Since I don't have access to a piece of the DAQ hardware, that I have to share channels between the two tasks of reconfiguration on the fly.

  (the program is too big / complex to post sorry)

  Initialize channels and relaxation (happens once at the beginning of the program):

  

  Get data every 100 s:

  

  Each 2 s get one sample of multichannel without triggering then restore the trigger:

  

  Please could someone explain when I have to use the 'task to start', 'stop task' and 'commit' aid is rather vague and unfortunately I find myself 'hacking' until it works, which is not the way I like to work! I use a USB-6211.

  The above program works OK, but has an intermittent (approx. every 10mins) error on the 'shutdown task"before returning to the trigger. (memory, the description was 'Task not over data acquisition')

  Thank you

  Al

  Al1234 wrote:
  ... Then this job is stopped and the original task is reconfigured...

  Al

  Simply set up once and just start and stop the job.

  I'm a guy sorta visual images will help us to help you.

  Ben

• The original loop iteration after receiving the trigger of the PXI-6652 pulse

  Hello world

  I apologize if this has been answered somewhere else, but I'm having a hard time finding examples and tired after a long day of work.

  in any case, I use a PXI chassis with a PXI-7854R FPGA Board and module synchronization PXI-6652.  I have the FPGA biphasic pulses being generated at 8 analog channels.  I want to be able to do is to send a trigger (say at 1 Hz) for the PXI-6652, which begins at the exit of the biphasic pulse on the FPGA.  I'm running the FPGA through a host program as the variables on biphasic wave will change based on the current experience.

  So, in short, I was wondering how to generate a trigger of the PXI-6652 pulse and then use this trigger in a host of VI to start an iteration of a loop.  It seems simple enough, so any help would be appreciated.

  Thank you, and I can post the code tomorrow if necessary.

  To answer your second question, Yes, the driver NOR-SYNC 3.3 is available for download and use with LabVIEW 2011.

  As far as use the PXI-6652 to start the acquisition on an FPGA VI, we have enough good examples provided with LabVIEW that will show you how to proceed.  To actually generate a trigger with NO-Sync, there are several examples in the Finder for example of NOR (help > find examples) which send a trigger one of the PFI lines to be used with the other modules.  You can search for OR Sync and they all appear here.  You need this driver installed first before you see anything, however.

  Also, if you look through the viewfinder of the example under Hardware Input and Output > R Series > FPGA Fundamentals > triggers and guard dog, you will find an example of triggering good enough it for use in your FPGA code.

  This example uses NO-Sync to trigger a device of the M series, which is not relevant to what you are doing (he uses DAQmx), but there is a very good example of generation OR-Sync trigger here who I think can help.

• input analog trigger on the door of the meter to measure the frequency of generation

  Hello

  I want to measure a frequency on the analog input, but it doesn't seem to work.

  I'm trying to work with DAQmx with the use of the ansi c standard.

  The first step, I've done was acquiring information on the analog input. With the use of a simulated device, it shows a sine wave on the entry.

  My next step is to generate a trigger for the meter signal, but this doesn't seem to work.

  I don't see how it is possible to connect the trigger on the entrance to the analog meter.

  For the creation of the analog input and relaxation, I use the following code:

  DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
  DAQmxErrChk (DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0","",DAQmx_Val_Cfg_Default,-3.0,3.0,DAQmx_Val_Volts,NULL));
  DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"",10000.0,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,1000));

  DAQmxErrChk (DAQmxCfgAnlgEdgeStartTrig (taskHandle, "Dev1/ai0 ', DAQmx_Val_RisingSlope, 0 '"));

  For the creation of the meter, I use the following code:

  DAQmxErrChk (DAQmxCreateCIFreqChan (taskHandle1, "Dev1/ctr1", "", 1 January 2000, DAQmx_Val_Hz, DAQmx_Val_Rising, DAQmx_Val_LowFreq1Ctr, 1, 4, "");)

  I hope someone could give me a hint.

  I also tried the examples that come with DAQmx but well I know this are only examples to counter with the help of the digital inputs.

  Thanks in advance.

  Hello

  You must use the exit event of comparison at the entrance of the meter. Change this property after the configuration string function.

  DAQmxSetChanAttribute (taskHandle1, "", DAQmx_CI_Freq_Term, Dev1/AnalogComparisonEvent);

  Kind regards

  Bottom

• How to limit the index field filter to display in standard integration page?

  Hi all

  I have a question here, how do I limit the index fields of standard display configuration check page? I noticed, there are also many fields unrelated to display standard failed in the page. Can I limit only the useful indexes appear in standard integration page? and how can I do?

  Thank you for your help.

  If you want to hide in the world, including all profiles too, you should be able to hide on the interface.

  Configuration Manager > Information fields > select > Edit > uncheck the box: turn on the User Interface > Ok

  When you do that, you may just want to remove the field.

• Non riesco a generare I trigger by the journal tables

  Buonasera,

  utilizzavo tables version 4.1.1 di Data model e riuscivo a generare I trigger by the newspaper, pero utilizzava sempre he nome di table "emp2."

  Nelle note della versione 4.1.2 release it era scritto che he bug era stato solved, pero adesso non riesco più a generare I trigger by the journal tables.

  You can help?

  Grazie

  Davide

  Hello Davide,.

  you are able to run the generation of 'test' as he explained here Oracle SQL Developer Data Modeler 4.1 user - defined DDL generation using transformation scripts

  Do you have a location in "preferences > Data Modeler"-"types of default system directory" - If there is a defined directory it can DM puts the script from that directory - scripts are in the file - dr_custom_scripts.xml. "»

  If you have not changed the scripts distributed with Data Modeler (or add new ones) so you can copy this file in the directory datamodeler\datamodeler\types of DM 4.1.2 installation to the directory defined in the preferences.

  In fact the problem in 4.1.1 DM was in the script itself always putting this 'EMP2' name in the definition of the trigger - line 66 should be modified in order to obtain valid results:

  old line 66:

  "WE DELETE emp2 for each line \n" +

  new line 66:

  "WE DELETE" + lname + ' for each line \n"+"

  Philippe

• Apex5: How to store field data in the Pagination of the Page

  Hello.

  We have recently started using Apex 5.0.1 on Oracle mod_plsql and 11.2.0.4.

  I have a (non-interactive) report classic, based on a collection of Apex and use g_fxx tables created by the package APEX_ITEM such as TEXT, DISPLAY_AND_SAVE, CHECKBOX2 procedures.  The report contains two checkboxes and editable and display only text fields containing data users have entered or have been extracted from the base.

  I have a button 'Add NEW LINE' that creates automatically a new line 'empty' in the report.  Clicking on it submits the page.  It is during this time submit that a process "After Submit" transfers what is in these paintings g_fxx in my collection of report.  When the number of added lines exceeds the maximum set for this report (30 lines).  The report then pages and the user will see a single line "empty."

  It all works very well.  The problem comes when the user clicks on the "Back" button  All previously entered data has disappeared leaving lines totally "empty".  Not nice.

  Someone knows how to keep the precedent of the fields in the report when content pagination to the 'Previous' or 'Next' in a report page?

  Thank you.

  Elijah

  EEG wrote:

  I'm sorry to be so long to respond.  Were flooded with more work Apex who had to do to meet a deadline.

  Your question...

  I * should * have been clearer.  The user clicks the 'next' or 'previous' links in the report when moving from one page to the next.  And "partial" page refresh is enabled on this report.  By your question, are you making reference to this partial page refresh must not be activated?

  By default, PPR is disabled on tabular forms generated by the wizard. I thought that if the same had been made in this case that Refresh complete which paging can be triggered some process of page which has affected the collection. However in this case we could probably expect No line rather than empty lines...

  I can't reproduce the problem based on the information provided. Suggest you try to demonstrate the problem on apex.oracle.com.

• Fill in the fields on the page loading

  The loading of the page, I like fill some fields to the result of a function and some fields to a sql query like

  SELECT LOGIN_DATA FROM APEX_TABLE WHERE LOWER(LOGIN_NAME) = LOWER ( NVL(V('APP_USER'), USER) ) ;
  

  I tried with processes and calculations. The calculation was before footer, but the fields are not filled.

  I use Apex 4.1 with the db 11 GR 2.

  Hi Wucis,

  Try a process "After Header".

  Write your "select into", something like:

  Select login_data

  in: P1_LOGIN_DATA

  of apex_table

  where the...

  Of course your page P1_LOGIN_DATA Articles needs to exist.

  I also suggest writing your process (PL/SQL) as a PL/SQL block, then beginning by BEGIN and ending with the END. This gives you the ability to make exceptions...

  It will be executed before the page is rendered, but after on the parameters that you have (possibly) linked through another page (through a URL).

  I hope this helps...

  Roeland