Popup desplays at startup

Similar Questions

• popup message each startup (boot) - error while unpacking program, code 2.

  I have two messages popup one after the other, after each startup (boot)... it appeared after by mistake, you tap install updates day & shutdown, at first men... Please bear in mine, I have not upgraded to SP2 now have SP1... I think the required updates SP2... sometimes to invite me to install SP2, but refused.

  VISTA Ultimate 64-BIT

  1 MESSAGE POPUP
  "Error while unpacking program, code 2" Please report to author. »

  2ND MESSAGE POPUP AFTER CLOSE FIRST POPUP
  "An error occurred when loading library commonforms.dll::RegisterWindow

  It may have been removed. Please reinstall the Application. If the problem persists contact technical support. »

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, then check if that helps you.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Run the Microsoft Safety Scanner and check if there are any threats found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: If no threat found check if the file is necessary or not, then delete it.

  Also make sure that the popup is secure and then install if necessary. Windows updates are all secure and this is only the computer and Windows manufacturer. Optional updates are the manufacturer of the computer and the manufacturer of the application that you have installed. Important updates are Microsoft and it must be installed. I also suggest you try to install Service pack 2 on your computer and check if that helps.

  Learn how to install Windows Vista Service Pack 2 (SP2):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Hope the information is useful.

• The Terminal services Server popup closed at startup

  After booting to the desktop, I get a popup saying services Terminal Server is not running. He reads an APPCRASH. I went to the services.msc and top one was auto and ongoing enforcement, the other 2 are manual and off... Always at every startup I get this warning. I have uac on and dep off following a conflict game.
  That's it, thank you

  Hi lobsta21,

  If you need Services Terminal Server or to prevent a person from remote desktopping in your system, you can disable TS on your computer and which should get rid of the boot error message. Try this:

  Go into the Control Panel - System - Remote Settings. Click the Remote tab, clear the check boxes.

  Let us know how it works for you.

  Dave Dave D D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Open a Popup screen on startup of the Application

  I know this is probably an easy thing to do but I'm new on this and the command I use to open a pop-up window in the menu doesn't seem to work when I try to use it to open a when the application starts.  I put this command in several places in the screen method and the method of opening with no luck.  Is someone can you please tell me what I need to do

  UiApplication.getUiApplication () .pushScreen (new LicenseAgreementPopup());

  I finally I want to add a way to accept or reject the license agreement but will just simply get the popup to display when my application starts :-)

  Thank you

  Thanks, the key is the word "after" I put the order right after my main application screen has been pushed and it worked.  I knew it was something easy

  SerializableAttribute public class extends UiApplication MapBack
  {
  String lv_continue;

  Public Shared Sub main (String [] args)
  {
  IdApp MapBack = new MapBack();
  idApp.enterEventDispatcher ();
  }

  public MapBack()
  {
  pushScreen (new MapBackScreen());
  UiApplication.getUiApplication () .pushScreen (new MapBackScreen.LicenseAgreementPopup ());
  }

• After the last update CC14 I get this popup error at startup. What gives Adobe?

  I think you dropped the ball on this update... it's two things, I've already complained.

  

  Quit InDesign and go to your Applications/InDesign/Plug-Ins folder and find the file ExtremeIO.InDesignPlugin and place it on your desktop. Try to restart InDesign. I hope this helps!

  See you soon!

  -Mikey

• How to remove annoying POPUPS ON STARTUP

  HI -.

  After that I have on intel.com attempted to update my graphics driver Mobile Intel (r) 965 Express Chipset Family my startup screen displays a popup with the text box:

  C:\Windows\System32\igfxtray.exe

  I wonder 'Run' or 'Cancel', but no matter what I choose exact same popup appears at startup again and I have to click 3 times Cancel to get the box disappear - it does not seem to affect my use of the laptop but it is a little annoying as his watch.

  On the help forum windows.com I followed suggestions without help unless the suggestion on Regedit open because many have said med does not tinker in Regedit

  I have no successfully posed this question on a forum within intel.com

  Someone at - it there a suggestion what to do?

  Thanks in advance

  DonOlesen

  Hello

  The igfxtray.exe seems belongs to the Intel driver and this file belongs to a software for fast access to the control panel via an icon in system tray of graphs based on Intel processors.
  Usually, you should see a small display Intel icon in the task bar in the lower right.
  The igfxtray.exe controls this.

  So you can also disable this in msconfig.
  Search type msconfig. Then, choose the StarUp tab and choose Remove the mark of the entry containing the igfxtray.exe
  Now save the changes and restart the device

  To disable this popup.

• Uninstall Drivercure application

  How to completely uninstall Drivercure of the system? I already uninstalled from the control panel using Add/Remove program and also in the list all the. But the program icon is displayed in the system tray and its popup on windows startup. Your help would be greatly appreciated.

  Hello jenvint

  Search in msconfig and remove the control from it

  Start/run and type

  Msconfig

  Ok

  Startup tab

  Keep the page open then click on the link below. It will tell you what are all the entries and see if you can disable them or not. It will also identify malicious programs.  Turn off everything that is not necessary to run at startup

  http://www.SysInfo.org/StartupList.php

  Read the key at the top of page. Use the search box to check all your entries

  When you restart, you will get a message saying that you have begun in "Selective startup" click "don't show this message again" and then click OK

  .

• Desktop Window Manager has stopped working and was closed

  One of our machines (HP Pavilion dv7 Notebook PC running Windows Vista x 64) will receive the error "Desktop Window Manager has stopped working and was closed" with lots of close error. He reappears (as well as all windows flasher to non-aero, then back to aero) in a few minutes, spends about 5 times per hour.

  I did some research on this and have already taken the following measures without a bit of luck:

  1 run the command chkdsk / SFC scan - nothing found via chkdsk, SFC found some issues fixed, and some, it did not set. Them that it solves not all related to Windows Sidebar, which I do not / does not start.

  2. put updated drivers for ATI Radeon 3200HD - this had a lot of new questions. Installing caused newer drivers ATI catalyst to no longer work with errors during installation and popup errors at startup. After trying several solutions workaround to try to get installed it, I ended up coming back to the driver that came with the laptop, that are properly installed and working without error. I am skeptical of update of this stable driver as a solution to the dwm.exe error.

  3. this problem just started yesterday, that occur with not a lot of changes. Other than updates of windows (I think that .NET framework and a few other updates installed), I replaced NOD32 antivirus with Bitdefender antivirus. The system was stable with bitdefender for about 2 weeks, so I'm not convinced that this program is causing the error.

  4. the event viewer shows the following:

  Failing application Dwm.exe, version 6.0.6002.18005, time stamp 0x49e02696, failed module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0 x 80000003, offset 0x00000000000461f0, process id 0 x 124 error, start the application time 0x01cea0365a457adc.

  Offset, process id and start on time all vary, but there are a lot of these application errors in the viewer all screaming Dwm.exe like the failing application.

  What should be my next course of action?

  You do not receive an error but a caveat. NTStatus results (the set of codes execption used by ntdll - the failed module) begin to 0 for no error, 4 for information (you should never see this), 8 for putting guard and C for error.

  It's your specific error.

  //
  MessageId: STATUS_BREAKPOINT
  //
  MessageText:
  //
  EXCEPTION {}
  Breakpoint
  A breakpoint has been reached.
  //
  #define STATUS_BREAKPOINT ((NTSTATUS) 0x80000003L) / / winnt

  Problem is, you shouldn't have breakpoints. Breakpoints are set by debuggers and stop the execution of the program to the State of the program can be examined. There should be no breakpoints in a retail system. More breakpoints are inserted into memory during execution of the program in a debugger. They tend not to do in the actual file.

  So here are two assumptions, either you have no exit code, IE test code (driver?). Or you have a running program that behaves like a debugger (which is suspect).

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.

   

  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.

  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Safe mode

  If the above does not help.

  Click Start - all programs - Accessories - run and type
   

  msconfig
  

   
  Go to the Startup tab, and then click Start. Reset. Come back here and uncheck the box secure start to return to normal mode.

• Error code: 0xC004F063 & 0 x 80070002 after reinstalling Vista.

  I reinstalled Vista from a disk of detail on this laptop Fujitsu Siemens AMilo Pi 2152.  The hard drive had failed and the recovery partition was not available.

  Vista activated OK with the thumbnail code.  Two weeks later I get now a reactivate popup Windows on startup and no phone option when I use slui.exe 4.

  MGADiag below

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - WRM6D - 3RPXT-2V7GR
  The Windows Product Key hash: 4LO/4hv3KjBdeK/bB8H9JqmXuLo =
  Windows product ID: 89578-OEM-7332157-00078
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {9055573E-2ED5-420F-85F6-5E5367038ADE} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6002.vistasp2_gdr.130501 - 1537
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {9055573E-2ED5-420F-85F6-5E5367038ADE}1.9.0027.06.0.6002.2.00010300.2.0.003x 32*-*-*-*-2V7GR89578-OEM-7332157-000782S-1-5-21-502017782-3835994172-817726546FUJITSU SIEMENSAMILO Pi 2512Phoenix Technologies LTD.1.11 C20080624000000.000000 + 00095323507018400FA08090409GMT Standard Time(GMT+00:00)03FCS PC 100100Microsoft Office home and Student 2007129F1F793B128E70AIfcq/dCiMlTgQ81Qh55Szr3hDlU = 81602-901-4619796-68978 1

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89578-00146-321-500078-02-2057-6001.0000-1442013
  Installation ID: 005716903636360071667901083786897811404231801896263222
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: 2V7GR
  License status: Notification
  Notification reason: 0xC004F063.

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: NgAAAAEAAwABAAIAAQABAAAAAwABAAEAJJRu/rqBYlgKsUaD/GkOj7Al8vQy2OgM6K2sViqF

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CRESTLNE
  HPET INTEL CRESTLNE
  MCFG INTEL CRESTLNE
  SLIC FSC PC
  SSDT SataRe SataAhci
  SSDT SataRe SataAhci
  SSDT SataRe SataAhci
  SSDT SataRe SataAhci
  SSDT SataRe SataAhci

  Hello

  Good to know that you are able to resolve the issue and thank you for sharing the information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Form1 popup at startup

  Good so I found an interesting problem where whenever I start my computer, I get a pop up in the upper left corner of my screen named "Form1". Now I've already looked everywhere on how to solve this problem, but nothing really seems to help.

  Form1 contains a message 'click on Skip Ad to close this window' so that a Linkbucks advertisement which leads me to believe that it is advertising and other software, there is also a section under advertising which have a box saying "your download is ready" with a button download and dubious 100% Safe' message below.

  I've done a bit of Malware Bytes and put in quarantine of some issues that came, but my computer restarts the window form 1 proceeded to pop up again.

  I already open MSConfig and looked through my boot options, but it seems to be nothing in respect to the pop - up of Form1 at all in there, think of you guys could give me help? It would be much appreciated.

  In addition, there is an element of startup called "Sony", but he says that the manufacturer is "Unknown", I doubt that its related to the pop up of Form1 because of the name, but I've been wrong before. In fact, I'm pretty sure it's related to Sony Vegas.

  I would also like to add that this popup can be closed using the window manager of tasks under 'Applications', but there will be poster at every start

  Use Autoruns and verify the path.

  Also try the clean boot.

  http://support.Microsoft.com/kb/929135/en-us

• How can I disable automatic popup at startup ads?

  How can I disable popups when I open Mozilla?

  Hello, please try to reset firefox and see if that can solve the problem...

• Popup of error at startup

  I upgraded to FF6 in the last 2 or 3 weeks. In the last week when I started FF, I get the pop-up window:
  "[load: TypeError: Components.classes['@checkpoint.com/XPCOMTrustCheckerMozilla/TrustCheckerMozilla;1'] is undefined.
  When I close the popup erything continues as usual.

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Popup L50-A-19N - Toshiba ECO Utility - satellite at startup

  Hello

  First of all please explain to me exactly how the ECO mode, IE. If it turns on some additional characteristic economy to those in power supply management profile and so characteristic ECO affect sort operation laptop AC power mode as to performance and video quality.

  Secondly, I need to know if in ECO mode battery charge is completely ignored so it doesnot cycle charge-discharge cycles if the laptop is tuened on long pperiods.

  Secondly can I have a tip how to turn off Toshiba ECO popup windows on each Windows starts.
  I don't want to uninstall it yet but don't want to close the pop-up window every time Windows starts, boring

  Hello

  Please don't get me wrong, but until someone here write a long story about this tool I recommend to start and click the help button. After doing this, you can check this help document and read all about this little tool designed by Toshiba.
  Is that this tool is designed to reduce energy consumption and CO2 emissions. With the help of this book performance will be reduced too, so you should use it when you need performance for some operations of some.

  When you use the option settings check all the options it and disable the option you want to use.

  In General, this tool is simply without a lot of options and it is designed for energy saving, especially if you use the battery power book.
  > if in ECO mode battery charge is completely ignored so it doesnot cycle charge-discharge cycles if the laptop is tuened over long periods.
  Unfortunately I can't offer an exact answer to this question but I think only utilitarian eco doesn t have a any influence on these technical issues. The principle, how the machine works (ESF) is, in my opinion, not changed when you use the eco mode.

• Dynadock - strange popup at startup!

  Hello

  I just bought & installed a Dynadock to my Satellite A100. Since the installation, I get a pretty large window pop up whenever I start.

  The window is called "CmEyeDialog, it has two buttons top right each with"? "on them, and in the body, he said ' TODO:?

  I installed the update 2.03 compared to the original, all uninstalled then installed just the 2.03 - whenever this window, except to reboot after everything uninstalling, if no process Dynadock were aboard.
  Everyone recognizes this glitch?

  See you soon
  Richard

  I don't know if this pop-up has something to do with the software Dynadock Mr. but who knows
  However, I recommend installing CCLeaner tool. It is a freeware program (google simply) that cleans up the registry and fix the operating system.
  It s useful and I use it also.

  Then, start the msconfig and check the last tab called startup if no strange service and is not known is initially loaded.

  Best regards

• Compaq Presario CQ56: "password administrator or power on password" popup blue screen at startup

  Hello, I receive the message at startup

  After you have entered the incorrect password 3 times, I have the following message:

  System disabled

  [59575596]

  I disassembled the laptop computer and disconnected the CMOS battery for 30 minutes without success. Any help would be appreciated, thanks.

  Hello

  Welcome to the Forum

  Try this code: 46453518

  Use the posted above unlock code to access the BIOS

  Disable all passwords that are enabled

  If current password request - type the unlock code

  New password, simply press the ENTER key
  Repeat the same thing to check the password column.

  Then exit the BIOS saving & exit option to save the changes.