Port Fowarding question - EA4500

Similar Questions

• Port Forward question e4200

  I have an e4200 and love it.  Here's my question and I hope that the forum can help:

  Background: directly connected (LAN) is a ReadyNAS Pro 6 Server.  I have a share that is configured to be a very simple through the port80 Web server.  The router is configured to direct all port 80 traffic (for example, http) to the server.  Wireless connected via Port 81 is a dlink (DCS 932 L) camera.  The port 443 (https) is transmitted also to the NAS (admin functions).  To help debug the problem, I created a portforward (1357), also on the NAS for https.  Created static IP: 192.168.1.10 and 192.168.1.11 (for the camera).  I also have a name of domain created by TZO that is active.

  Other port forward: mydlink.com which is a dlink site that allows access to the camera dlink.  I also have a Plex Server (port 32400 I think) that works great.

  Questions: On my network local (inside my house), enter, either http://mydomainname.com or http://NAS IP address gets me to the Web server and the homepage.  With: 81 takes me to the camera; : 443 or: 1357 takes me to the functions of the administrator of the server.  Is... all the works I want it.

  Go outside the home: www.mydomainname.com takes me directly on port 81 and request the login/password for dlink camera (same for www.mydomainname.com:81 and www.mydomainname.com:80). https://www.mydomainname.com takes me to the connection of camera dlink, like https://www.mydomainname.com:443 

  https://www.mydomainname.com:1357 takes me on the server and the homepage and access for all functions.

  I suspect the problem with DLink and mydlink (uses UPNP).  Any help would be greatly appreciated!

  Thank you.

  Thus, it seems that the camera works now. The Universal Plug and Play (UPnP) service in Microsoft Windows use discovery SSDP (Simple Protocol) Service to locate and connect to the services and network devices. There are security risks associated with these services, and on several occasions, these services were responsible for denial of widespread service of the host Windows campus. System and network security (SNS) recommend to disable UPnP/SSDP service on all Windows hosts and activation of the service only when necessary.

• I want to get the best on my router (Port Forward questions)

  I use the WRT54G2 router and the wmp54G. I'm trying to get games like America's army and Team Fortress 2 to work properly. I've assigned my static Ip pc using the guide portforward. I forwarded the necessary ports.

  I can't connect to my account on the U.S. military, and I can not connect to servers on Team Fortress 2. I tried to disable my anti-virus and firewall but still no luck. I'm doing it on the pc with the wireless connection.

  Any suggestions?

  I also have another question: when transmitting ports or using DMZ, what IP address I send? The pc connected directly to the router or the pc which is using ports (one wireless)?

  BTW, MY ISP is Comcast

  In most cases, you can use the DNS proxy server that is built into the router at 192.168.1.1 (address by default), but in your case would be in 192.168.2.1

  It is preferable to use the DNS proxy server.  The router keeps track of the actual Internet DNS server addresses from your ISP and transfers data to the appropriate DNS server.

  If the DNS server of the router proxy does not work, then enter your true Internet DNS server address in your computer.

  In addition, I see that you use the et.102 adresses.101 in your computers.  Your range of DHCP servers by default est.100 thru.149, so unless you have changed it, you use illegal LAN IP fixed addresses in your computer.  This could be the cause of your problems.  Note that all fixed LAN IP addresses should be outside your range of DHCP server.

• Port of question - no video - DVI double separator i7-HDMI > DVI

  What I'm missing here?

  I have an i7 2.3 g-Mini late2012.  10.8.5. in a studio where I fed a dual display

  using a separator of video signals by - everything first, Tripp Lite, now an Aluratek - DVI 2-port video splitter (powered

  units).

  Followed by all the good order in start-up, the device worked for maybe a week and a half.

  Walked away and returned after maybe 48 hours either from Friday to Monday.  Computer is running

  "sleep" mode... The attempt, no signal wake video monitor not recognized.  Powerd deactivation/activation, no change.

  Reset PRAM and disconnected/reconnected Mini power after 30 seconds... tried reconnect splitter/monitors...

  sequence... still no resolution of the video signal to not watch.  Indicators on the splitter show the signal of the i7.

  and connectivity to the monitors.  I excluded this device that the fault.

  Am following the process mfgr correct insofar as the separator like so new out-of-box in reconnecting

  power on it - getting nothing.  Strange thing is, I had the same problem with the Tripp Lite - that's why I

  bought this Aluratek separator to replace.  Now, same problem.

  When connected to same monitors, this worked fine right out of the box.

  Now the same problem as the other separator.  Changed two different HDMI > DVI

  cables. All cables. No change.

  Either monitors directly linking ON the HDMI Mini port - display works fine.

  Tried the MiniDisplay port to the separator. didn't work...

  Which may conflict in operating system - something making these monitors sleep, something system-wise

  who is disrupting this process?  Even pulled all other connections (external USB port stuff) and it

  did not solve.

  It is also a coincidence for two separators to fail with this same issue - seems to indicate something with the

  Mac. In the meantime, no double posting until I can understand it.

  Any help greatly appreciated-

  Thank you

  Mike

  I suspect the power adapter... and maybe check for a loop of mass too.

• Satellite S50T-B - port HDMI questions

  Hi all...

  I hope you can help. I bought my new Satellite October last year and the first day I've known connection of an additional monitor problems. Initially I had an old monitor with a VGA connection, and of course this computer has only HDMI.

  So I bought an adapter, which did not work. I tried to connect my computer to the tv with the HDMI cable screen to test it, but it still doesn't work. It is still under warranty, so I sent it to the service of Toshiba, which couldn't find anything wrong with it and returned it to me.

  So I bought a new monitor (a BenQ) and a new HDMI cable. Indeed for some reason any he has worked for a couple of months.and isn't now. The computer does not detect the monitor and the monitor says there is no cable connected when I attach it to the computer.

  I tried everything and it drives me crazy.

  Hello

  The VGA-HDMI adapter will not work because HDMI provides digital signals and VGA (RGB) port supports analog signal. You cannot mix the two!

  In any case, go back to your HDMI problem.
  Please try this workaround:
  First of all go to BIOS (F2) and put back the default BIOS settings (F9) and save the changes (F10).
  Now connect the laptop and the TV with an HDMI cable. The two units must be OFF when connecting.
  Then turn on the monitor and then the laptop.

  AFAIK, you must use the function key: FN + F4 to switch to a display external or internal.

  Please check this!

• Read/write port DAQmx questions

  Environment

  Windows XP SP3

  LabView 7.1

  NOR-DAQmx 8.7.1

  (2) PCI-DIO-96 cards

  I'm trying to move from the level of registry TDAQ programming DAQmx and give me an "intensive" in mx.  I'm not sure about a few things.

  I need to put in place 20 channels/tasks that will run a mix of single, large port (8-bit) bed and written.  Some will be handshaking (82 c 55 mode 1) and some no handshake (82 c 55 mode 0).

  The plan is to create all tasks during an initialization routine and save the names of global tasks.  I open the task after creation and use the globals during the main part of the program execution, when I make the reads/writes on the port.  The body can run for hours at a time.  When the main is closed, the stop routiine close all tasks to exit ahead.

  Regarding the task creation/destruction - is it safe to create tasks and leave them open, or should they be created and destroyed every time that a write is performed?

  Regarding the port reads/writes, I suppose that when a port single read/write is made, there is no established buffer.  Is this correct?  Specifically, if I use the method above and leave task open, is it possible saturation of buffer or something similar to happen?

  TIA

  Charlie

  Regret - Yes, you said 7.1 - I can't keep back away, but here is a screenshot

  

  And - the task is saved outside of LabVIEW, so it's not really 'Open' or 'Closed', even when programmatically, create and destroy jobs.  Tasks exist or do not exist.  If they exist and have no errors, they can be run.

  Tampons are to move data to and from the device.  For static DIO, this isn't a problem.  You CAN run into problems with a task of acquiring buttons if it acquires data as soon as you read the data, but you can work around this by starting and stopping the task properly.

• E2000 HTTP Port Fowarding stops after a few hours

  Port forwarding Port 80 stops working after a few hours and requires the router to be restarted to begin to transmit again. The firmeware is the last 1.0.04)is Build 7. I need to work reliably for several days without intervention.

  I guess it is a problem of port forwarding because I can access the IP address on my network within my network even when I can't access it from outside my network. I use the appropriate IP addresses because it sometimes works OK. A peculiarity is that, when I can't access the page, it loads as totally blank white without error message.

  I suggest restore you the router (30 sec), wait for solid power light and then reconfigure the settings.

• Iron port SSO question

  Hello

  I joined the WSA with active directory

  configured single sign-on

  but Microsoft lync always invites for authentication

  Please what can I do to solve this problem

  Thank you guys

  I'll make a few assumptions:

  • You use Lync in the cloud
  • Lync is running at startup
  • the user has not yet opened any web page.
  • The guest is web access associated, NOT the connection real lync.

  Try this for me. Release of Lync, use a browser and press an external web page.  Start Lync (with or without the browser open, any).  It should work...

  The question is Lync cannot handle the request auth web (Outlook only).

  You have 2 options.

  • Determine what Lync user agent string used to create an identity in the ASO for her and a policy that does not require auth for this user-agent.
  • Deploy a NOC so that connections are captured by domain controllers and passed to the ASO before the users session actually gets to the point where his need.

• UCS FC Port Channel questions

  Hi all

  I tried to connect the FI FC port to the Nexus 5 K. YEW has been configured in host end (VAN) mode, while the N5K has been configured as NPIV switch (NPV core).

  After trying many things, the SAN PortChannel link on both FI and N5K cannot grew up, stuck in the initializing state.

  If the N5K and FI was not grouped in PortChannel, connection set successfully.

  In addition, I found and who issues the FI when running in NPV mode, the trunk cannot be configured as trunk mode on (if configured, so the connection will get stuck in the initialization of State too).

  Attached are the files of configuration on FI and N5K

  Also, I tried to connect the FI to MDS 9222I and had the same problems that connect to N5K.

  Can anyone help?

  Comparation while I connect the Nexus 5 K as NPV switch and MDS 9211i as mode NPIV, the PortChannel SAN and circuits (N5K as TNP) and MDS TF was successfully raise.

  Thank you

  GOFI

  Gofi Hello,

  As interface comes from the individual links and N5K running version 5.1 (3) N1 (1), he may run into the following faults

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCty04686

  If so, N5K software must be upgraded to a version that has the fix for this flaw.

  HTH

  Padma

• Port Fowarding PIX 501

  Is it possible to forward port 80 to internal ip on a PIX 501?

  I have a PIX 501, which made PAT / internal DHCP for my network. I want to forward all queries [80] http to an internal web server.

  Thank you

  Sepyh...

  You can use port forwarding to get there.

  Here is an example configuration:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_tech_note09186a0080094aad.shtml#port

  Hope this helps,

  -Nairi

• 1225 VIC Port Virtualization question on Cisco UCS C240, 460 servers without FI

  Dear all,

  I have installed & configured the hypervisor, its running fine.  But the servers are connected directly to the nexus & there is no FI here.

  But the business must virtulize the adapter VIC & use for multiple purposes such as vmotion, FT etc...

  When I create a vNIC on CIMC & map the uplink port 0 or 1, even if those who signed off on the esxi console, even if the status of uplinks in the esxi console are shows connected.

  Will be that the adapter Virtualization is supported wireless?  Please tell us the best practices, how to use the Cisco VIC 1225/1227 wireless & how to virtualize the adapter.

  It would be a great help...

  Thanks in advance.

  Kind regards

  Gopi G

  Hello

  These guides should be useful:

  http://www.Cisco.com/c/en/us/support/docs/switches/nexus-5000-series-SWI...

  http://www.Cisco.com/c/en/us/support/docs/servers-unified-computing/UCS-...

  http://www.Cisco.com/c/en/us/TD/docs/switches/Datacenter/nexus5500/SW/ad...

  HTH,

  Wes

• Problems of IPSEC Tunnel & Port fowarding

  Hello

  I have a couple of 837 routers connecting two sites using an IPSEC tunnel.

  In one of the sites, I'm redirected to static NAT port to an internal IP address

  That is to say.

  IP nat inside source static tcp 192.168.57.100 3389 3389 Dialer0 interface

  transmit to RDP from the internet to internal computer.

  The user can access his computer when you use the public IP address, but if it attempts to access the other site using the internal LAN IP he can't

  Any suggestions

  Hello

  Your config NAT 192.168.57.100 over the VPN tunnel as well. Two options for access to this IP address via VPN would be.

  1.) use the IP NAT itself on the VPN tunnel working currently for you.

  2.) use NAT policy so that the VPN tunnel traffic is exempt from NAT. In this case your NAT statement should look like this.

  IP nat inside source static tcp 192.168.57.100 3389 3389 Dialer0 interface - card route

  access-list 101 deny host ip 192.168.57.100

  access-list 101 permit ip 192.168.57.100 host everything

  permitted route map 10

  corresponds to the IP 101

  HTH

  Kind regards

  GE.

• Service console and VM kernel port group Question

  I have the separate subnet of installation for the service console and the port the kernel VM group. Currently, I plan to install the software iSCSI adapter to connect the LUN. Is there something else I need to do to configure?

  It is said that if the console VM kernel and service are in separate groups of port.

  Usually I use a different physical network for iSCSI.

  But if you only have two network adapters is not applicable.

  Don't forget the vmkernel interface used for iSCSI is in the same logical network and same VLAN as your iSCSI target.

  I need to create a service console more, I do not have it?

  With ESX 3.x, you need a SC for iSCSI (or routing rules).

  With ESX 4.x is not necessary.

  André

• EA4500 + ADSL router: networking noob question

  Then... I'm not sure of the right words to use, but this is the case I would appreciate the help. I tried to figure out how to survive myself, but I find it a little confusing - however, if you think I just need a networking 101 do not hesitate to send me to appropriate information sources (I've tried a few, as I say, but I have not yet found a place where my situation fits!).

  Quick back story: I have a cheap TalkTalk ADSl router (D-Link 3680) where the Wireless does not properly in the House. So I just got a DSL EA4500 router for better strength/speed/compliance wireless - you'll just have to forgive me for not having an ADSL router, which I realize may have been a simpler solution!

  First of all, I put the (D-Link of TalkTalk 3680) ADSL router in Bridge mode and got this and the EA4500 work together which was great as it goes. However, I would be hard...

  I have a tower PC and wish to receive wired ethernet network. While I know in the set - up above I can run a cable from the 3680 to the EA4500 and then another cable to the PC because the PC is closer to the telephone (with the ADSL router) Jack, physically it seems wiser, if I take the PC of the 3680 ethernet connection (along with a second cable 3680 to EA4500 connection for the wireless). It may or may not be relevant that the 3680 is a Fast Ethernet output, as is the network PC card (i.e. are not Gigabit).

  I don't know (a) whether the above configuration is possible and if yes, how, or (b) the question whether in terms of networking, it is best to cable to the EA4500 computer (even if this will create a longer path to the PC and the wiring more).

  Meaning, and if yes maybe someone could give me also a term for what I'm doing?

  Help gratefully received! Garreth

  3680 port LAN (bridge) => EA4500 Port WAN (router)-online PC peripherals and wireless

  It's the best configuration and nothing should be connected to the 3680 other than the EA4500.

  The physical location of the electronics is not important, unless you can not run cable or wireless signal is low.

• EA4500 - unstable connection to my external hard drive from Seagate Freeagent

  Hello

  I would be very grateful if someone can help solve the problem captioned.

  I bought the EA4500 for a week and all is well, except that the connection to my external hard drive 1 TB via the USB port of the EA4500 is not stable.

  The router are visible at the level of the 'network' of Windows 7, as one of the "Computer".   I therefore use my memeo autobackup software to back up my data via a network connection on the external hard drive.

  It works very well, however, for a limited time.  The time is a few hours.

  After that happens, the device can no longer be seen at the level of the "network".  In addition, it cannot be mapped via the service 'road map' normal.  A "Not enough resources" error when I want to map the drive.

  The problem can be solved temporarily after a "roboot" of the router.  But it's frustrating.

  Can someone help me solve this problem?

  Thanks in advance.

  What is the ip address of your router buffalo? 192.168.11.1?

  Check and see if you are double natting.

  Try changing the scope and dhcp IP linksys range identical to the buffalo.