Port hot display on my lenovo T510 cable!

Similar Questions

• What port mini display of brand to HDMI cable should I use?

  What port mini display of brand to HDMI cable should I use?

  Besides Apple, Belkin seems to have good reviews.

  Ciao.

• Can Lenovo t510 I put the 1366 x 768 to 1920 x 1080 resolution

  I have a lenovo T510, which has a maximum resolution of 1366 x 768, it has nvidia NVS 3100 M. Ive checked with nvidia graphics card and it says that the gfx card support 1920 x 1080.

  If its possible could I buy an LCD 1920 x 1080 and adapt it to this laptop without any problem. Or I'm going to buy a LCD 1366 x 768.

  Welcome to the forum!

  It is possible, and it's the LCD you need:

  http://www.panelook.com/B156HW01%20V4_AUO_15.6_LCM_overview_686.html

  Good luck.

• Wireless is slow on Windows 7 on laptop brand new (Lenovo T510)

  I have a new laptop (Lenovo T510) with Windows 7 Professional.

  The wireless is slow at home and at work. (I use www.speakeasy.net/speedtest for my speed tests.) At home, the wireless speed is about 1 Mbps. My older laptop (Dell Latitude D630) XP gets 14 Mbps or higher on the same network. If I connect directly to my router, I get speeds over 20 Mbps on my new computer laptop.

  I have (even worse) similar results using the connection Wireless at work. I get speeds of 0.4 MB/s wireless, while my laptop Dell (XP) gets 14 Mbps. (Fortunately, I have a wired connection I use at work). At home, however, it is not really practical to use a wire.

  I read through the forums as much as I can find, and I've tried several things... which none have helped. Here is what I tried:

  -Updated all drivers network card.

  -Management settings power change to "maximize performance.

  -Uninstalled software built-in wireless to Lenovo (logins).

  -Played clean boots with all disabled non-Microsoft services.

  -Disabled my software installed antivirus (Kaspersky 6.0)

  The only thing that provided a benefit is disable anti-virus... software but this is only useful at work. At work, if I turn off the antivirus and restart it, I can achieve speeds up to 5 Mbps (remember that my Dell XP laptop always gets 14 Mbps or greater). But, at home, disable the antivirus software does not make a difference.

  Any ideas?

  I finally got it to work. I now get wireless speeds in the range of 7 to 12 Mbps. That's what I did yesterday:

  -Installed all Lenovo ThinkVantage tools - including updates to * all * optional updates.
  -Manually update my network card drivers wireless (Intel Centrino Ultimate - N 6300 AGN) in version 13.1.1.1. (It's at 13.0.0.7 and when I click on update driver, he couldn't find any new tool.) But, I found 13.1.1.1 on an Intel website and installed it.)
  -Uninstalled ThinkVantage Access Connections wireless management software.
  -Disabled 802.11n Mode (it's been activated) under the Advanced tab of my Intel Centrino Ultimate - N 6300 AGN properties. (This amount has contributed to the work. I received fast performance with this active or disabled on my home wireless network after other changes.)

• How do I reinstall Windows 7 on lenovo T510, lost recovery disk

  I have a lenovo T510 I want to install linux on as dual-boot and in the process all corrupt. I don't have a recovery disk but have a legitimate windows 7 license key from lenovo. Where can I get a windows7 64-bit software and install using the lenovo provided the license key

  Thank you

  * original title - lost recovery disk, how to install windows7, have a license (OEM however). *

  The instructions on the Lenovo site is to call Lenovo support to order recovery disks

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-4HWSE3

  Colin Barnhorst Windows 7 Ultimate x 64 on DIY with 6 GB of ram.

• W540 - display resolution double screen with cable DVI - D Dual Link

  I recently bought a W540 and connected to my Dell u3011 30 "monitor. I used the Dual Link cable DVI - D that came with the monitor and connected on my Dock Ultra. The maximum resolution I can get is 1920 x 1080? When I pass a display port cable I can achieve complete resolution of 2560 x 1600? Is there something I need to do to get the complete resolution of 2560 x 1600 with dual link DVI - D cable? I want to be able to connect 2 laptops to a normal screen and 1 entrance to port the screen so I need to be able to use the DVI cable on the 2nd machine while allowing resolution 2560 x 1600.

  Port DVI - D on the Ultradock is single link only.

  If you need DVI - D with double bond (i.e. 2560 x 1600) resolution, you need an active displayport to dual binding converter. StarTech makes, they should be about 80 USD or something in this region.

• my iphone 5 c opens more after that I was invited to be updated with itunes. now, the display shows only itunes usb cable and logo. read some tips here, but nothing happened. any help will be much appreciated.

  My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.

  https://discussions.Apple.com/message/30014877#30014877http ://

  Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.

• trying to find compatible 1 TB external hard drive 2 TB capatible for backup of Lenovo T510

  I'm trying to understand what high speed 1 or 2 TB capatible external hard drive that I could buy - and if I can 'use' a USB 3 or if I'm stuck with USB 2.  Have you looked at LaCie and Verbatim discs... suggestions appreciated... I do not know what a PCIE card, etc. is...

  The Rosewill and others like it, are empty envelopes.  You install a HD 3.5 "SATA inside.  There are other - smaller - units that can use a 2.5 drive "a laptop.  These enclosures support different ways to connect to a laptop (or desktop): USB 2, 3 USB, eSATA, depending on the chosen box.  The boxes for disks 3.5 "have generally also a brick or"wall-wart"power supply.  2.5 boxes "sometimes do and sometimes are powered via the USB port.

  There are also many complete devices that provide an enclosure with a drive that is already installed.  They tend to be "prettier" and well integrated.  Also usually more expensive than a speaker + HD purchased separately (this varies) and in my experience, tend to run hot.

  You may prefer the comfort of a one-piece integrated solution, but I like the flexibility of an envelope + HD with my choice.

  [edit] The units come often (always?) with the included HD already formatted.  A speaker + HD provided by the user will require drive initializing and formatting.  A blank disc will at times be initialized in victory disk management by using the USB connection, before we see via the eSATA connection.  I don't know if it's a quirk of my speakers, readers, or Windows.  Just a heads-up.

  Z.

• Tecra M9 and Express Port Replicator - display flicker

  Hi guys,.

  I'm having some problems with my new Tecra M9! After that laboriously installed all the drivers and ending up with a nice clean install, I am now subject to constant headaches!

  I run a Setup dual monitor with my main monitor being a LG 19 "and the second screen being my Tosh laptop screen. When I move anything or anything open my main screen flickers like mad! I swapped the primary monitor with another screen (make and model), and it still happens! If I connect the main monitor in the laptop VGA port and run the same setting of the screen, its fine, but the second I put it through the docker it still sparkles! I also checked running a single screen (an external monitor) it still happens!

  I've updated all my drivers to the latest version without any doubt the GFX and BIOS.

  I can't be the only person having this problem, I have at least 3 of Tecra M9 who have the same problem and I can't buy laptops additional I need till remedy! Help!

  Your Andi

  Hello Andi

  Before starting any discussion can you please tell us a little more info on pre-installed OS? You wrote about installing the drivers. Why?

  As I know your laptop comes with the own operating system preinstalled. Why you do this again? And what operating system you are using?

• Serial com port USB displays error code 10

  When I did a check up on my computer (Windows 7 OS) this morning he said my serial port USB COM 3 would not start and had a code 10.  I went to the Device Manager and checked, and it says the same thing.  I clicked on update of drivers and it said that I had updated the drivers.  I plugged the USB things in the USB port and it worked fine.  I went to Device Manager and it still has the yellow mark with code 10.  How can I correct something that seems to work correctly?

  Thank you

  Shirley

  Hello

  1. did you restart the computer after uninstalling the USB device?

  I suggest to restart the computer and let Windows install the drivers automatically, or you can use the link below.

  Update drivers: recommended links

   

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this helps and keep us posted.

• Additional screen using tv moitor. Windows 7 allows two displays to change plug this cable?

  I use an acer aspire laptop.

  Can I change what plug an additional TV monitor

  HDMA1 cable made. That is to say. not to turn off the power of the laptop screen and allow both screens at once. "HELP TO.

  Press the Windows key + P and choose "extend" from the menu that appears.

• P2415Q - no display on DVI, HDMI. No menu. Worked perfectly for a month on the display port

  Line of reason: Dell P2415Q. After a month, works perfectly on the display port, no display on screen Display Port or HDMI, no response to the menu buttons, backlight and power ON but no picture on the screen.
  
  

  Description of the problem
  

  The monitor worked out of the box for a month using the mini display port display port cable supplied with the monitor, which was plugged into my XFX 7970 and 7950 graphics cards. It supports 4K at 60 Hz and has been exceptional for photos, videos and games. Wednesday, the monitor no longer works, no picture or menu is displayed on the monitor. I plugged my old monitor to help diagnose via DVI graphics card even. When I press the power button on the Dell P2415Q monitor, the power LED lights up and the computer detects the monitor (as shown in the menu of the windows screen resolution). He defines as a secondary display but the screen remains black, I see the light power and backlight is turned on. No power save mode popup doesn't appear on the monitor, when I press the buttons of the menu there is no response from the screen, it stays black. I repeated with an HDMI cable, the same problem occurs without intervention or image. I repeated and disabled crossfire (which allows graphics cards to run independently) and tried the second graphics card without response. I tried the HDMI cable I used on my old LG monitor, it works well. I tried to connect a laptop on HDMI to the monitor too, no response from the monitor. I've exhausted all the tests I can think, I guess I'll have to return to the screen for repair or replacement under warranty. A question to the community - and dell rep is there anything else I can try / to make this work? 

  Monitor / computer details
  

  Monitoring of service tag:
  Computer: Non-Dell, build self about 2 years ago. Ivy Bridge i5, motherboard Gigabyte Sniper, 16 GB RAM, XFX 7970 GPU and XFGX 7950 GPU crossfire, 256 GB SSD, Corsair AX 860W (860W on independent 12V rails) supply power. Windows 7, 64-bit. (D2342 LG secondary monitor).
  Operating system: Windows 7, 64 bit.
  Graphics card: XFX 7950 XFX in Crossfire and 7970 (tested separately, product monitor fault at a time).
  Video card driver: 14.12 AMD driver Catalyst (restored to the old driver, always due to lack of product monitor).
  Video card output ports: tested with miniDP and HDMI on both cards, with crossfire enabled and disabled. Monitor product always loopholes.
  Cable video card: miniDP to DP cable supplied with the monitor. HDMI, tested with spare monitor to confirm it works correctly.
  Monitor Menu button: Inadmissible, what power is enabled on the computer detects the Dell P2415Q monitor, the backlight lights up but no image appears on the screen. By pressing the menu buttons produces no result - menu does not appear on the screen. Power LED is lit.
  Monitor purchase: purchased from Overclockers.co.uk March 2015.

  * Turn off the monitor
  * Disconnect all cables from the screen, including the power cable
  * Press the power monitor in pendant button 15 seconds
  * Reconnect monitor cables, then repeat the test. If still no go, your only option is to get exchanged by buying warranty
  * But first serial number must be transferred on your behalf using this form

• Thunderbolt Display 27-inch TV using the HDMI port Minidisplay

  My setup is macbook air, Thunderbolt Display, 55 inch TV.

  Wanted to know if I plug Thunderbolt display on TV through HDMI Adapter Mini DisplayPort / (Thunderbolt), it will be able to display of Macbook Air, Thunderbolt display and TV even time?

  Thank you.

  The Thunderbolt ports and displays: frequently asked questions (FAQ) - Apple Support

  An alternative would be to buy an Apple TV, then use AirPlay on your Mac to stream content both Thunderbolt display, Mac and TV, but the TV must be HDTV.

• Equium M50 will not recognize the LAN port - error: disconnected network cable

  I own a Toshiba Equium M50 and have problems with the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller.

  I used to connect through a Modem/DSL switch "ADDON" and had no problems. I then replaced the ADDON with an ADSL Modem/Router "NETGEAR" DG834G to win the wireless port, and since that time my machine won't recognise the LAN port. .

  I know that cables are OK I used with other phones and had no problems. I can also plug a PCI card to connect without any problems. It seems to me that if the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller has a problem with the netgear Modem/Router.

  Anyone out there with a similar experience and some tips/suggestions?

  PLEASE

  Hello

  For me this doesn't show t as a problem of LAN card but your router is a problem.
  Check Device Manager if the network card is correctly recognized. If there is no yellow exclamation point, so all is ok!
  You can try to remove the network adapter from Device Manager and reboot after new install driver LAN again.

  The question has looked after installing or connecting the new Netgear modem router.
  I would recommend to check first the settings or update the firmware on this router.

  I found more useful websites
  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  http://www.experts-exchange.com/Networking/broadband/DSL_Cable/Q_20381405.html

• I can't get the internet cable into the port

  the model is an hp Pavilion dv2700

  Hello

  What type of cable you are using? We use called CAT5e or CAT6 LAN cables. This is the LAN port on your machine:

  

  and the cable should look like this:

  

  Kind regards