Port USB and IPOD SPA40

Similar Questions

• Satellite A105: External HDD USB and IPod connection problems

  Hello

  I have computer laptop toshiba satellite A105, last weekend that I have reinstalled windows on my laptop using the recovery discs, and now I had two problems.

  First problem when I connect my external hard drive, my computer show no icon of this hard drive, but when I check in the management-disk external hard drive is connected to my computer.
  Second problem is my IPod, a similar problem on the hard disk indicates when is connected to my laptop but when I checked in the device under usb controller Manager appears, but with the yellow circle and question marks.

  Could you help me to solve my problem?
  What about the Kings
  Wojtek

  Hello

  Have you tried to update the drivers of USB port?

  You should try this;
  -Disconnect all USB devices the USB ports.
  -Go to the Device Manager and remove all the USB root hub and all USB host controllers.
  -Restart the laptop

  After this procedure, the Windows operating system should recognize and should install the USB ports again. After restarting again you must connect only USB devices and must verify if they will work properly!

• iPhone 3G, without warning, the iPhone screen shows (vertical hold) logo from itunes, with a port usb and the arrow pointing up. I have 10.7 update iPhones.

  Without warning, the iPhone screen shows (taken vertical) logo to itunes with a usb port and the arrow pointing up. I have 10.7 update iPhones. When this iPhone is connected to the computer, Apple recommendation is to "restore" the iPhone. If I do this, would be erased all data stored? Thank you

  You would have to post on Apple Support communities to get a definitive answer on this one.

• Windows failed to update for HP - Bus USB and Ports, display controllers - HP w2408 widescreen LCD

  I have a new HP M9402 desktop with monitor Hp W2408 Summit.  I get a message to update windows for HP - Bus USB and Ports, display controllers - ACL from HP w2408 widescreen, but the windows download always fails.  I tried several times to download this update.

  Any help would be greatly appreciated.

  Hi all

  The solution to my problem of not being able to make updates to the window was to spend in an HDMI instead of VGA cable.

  BR / / JJG

• Pavilion dv5 2048la: not working touchpad (keyboard/mouse) and port usb but turns on properly

  I started to clear some files in the main C: files then the touchpad did not find the (ordrivers of controllers) and I used a usb mouse. But now this does not work since the only time where that I turned off the computer and then when I turned it on it has stopped working also. Even if I have to do something more professional, I would like the answers. Also CD rom does not work a long time ago. Help, please

  Alex-Simball

  Hello;
  
  Let me welcome you on the HP forums!
  
  I hate to be the bearer of bad news, but you are in a really difficult situation that's going to be almost impossible to fix.

  First, there are the ways, if you have the Windows installation media, to repair missing system files - but you probably don't have that, and even if you did, your optical drive would have to work in order to be able to read the media.

  Second, you may want to restore your PC to its original state using HP recovery media, but there are two problems with this: (1) HP stores not more to your PC and your optical drive would need to work in order to use it (2) is a set of a DVD and a CD.

  To restore your PC to the operating status, you'll need to be able to start using Windows disc media.  One way that COULD work is if you use an external DVD/CD drive plugged into a port USB - but for this to work, your PC must be bootable (1) and (2) be able to boot from USB.  IF these two are not true, then you can not restore it - the way it is.

  Here are a few troubleshooting steps when your PC won't start - you can try them and see if everything works: computer won't start (Windows 7, Vista, XP) | HP® customer support

  Maybe something in this package of measures will work.
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP pavilion slimline s5220y: the 6-in-1 card reader combo - headphone and microphone ports usb plug

  where can I buy a combo of 6-one - with ports usb memory card reader and headphone and microphone jack. I can't find any place that has always part

  Goodrock, welcome to the forum.

  Because the computer is almost 7 years old, I don't think that HP will have parts.  In my opinion, your best option is to buy an external card reader and card internal with USB ports.  Headphone and microphone sockets will be difficult to replace, or not at all.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• IAM using windwos vista I try to copy a data file to my wile pc usb port copy the cry of power dwon ofter that I do not find the fine in usb and my pc so how do I get this file back

  IAM using windwos vista that I try to copy a data usb port on my pc wile file copy the cry of power dwon ofter that I can't find the fine in usb and my pc so how do I get that file back please answer me

  Hello

  This program allows you to search for and attempt to recover the file to your C: drive and / or your USB Flash drive.

  http://www.Piriform.com/Recuva

  See you soon.

• Hung up on the bad test page port (LPT1) and tail blocks to HP C4200 w/USB connect... will not erase

  Hanging test page to the wrong port (LPT1) and tail blocks to HP C4200 w/USB connect... don't delete.__How cancel?  Pls help.  TKS Ron Moore
  

  Ideas page: hanging in wrongly Test prt (LPT1) and tail blocks to HP C4280 w/USB connect... will not erase.

  How to cancel?  Pls help.   TKS, Ron Moore

  Hi Ron,

  1. how many printers is connected to the computer?

  2. did you of recent changes on the computer?

  3. what happens when you try to change printer (LPT1) port

  Method 1

  See the link below and run them the fixit tool available, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

  Method 2

  If the previous step fails, then I suggest that you restart the computer the print spooler service and check if it works.

  A print spooler is a system service that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  (b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) right click on the print spooler service, and then click Properties.

  (d) under the tab general , next to Startup type, make sure thatAutomatic is selected.

  (e) if the service is not already running, under Service status, click pie Sand then clickOK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless use USB ports locks and prevents the Windows shut down

  Hi all. Faced with this one.

  Computer is the laptop, HP Pavilion DM4 - 1150ca. 4 GB of Ram, 150 GB HD

  OS Win 7 Home Premium 64-bit, SP1 and latest updates installed

  Problem: I have 3 ways to connect to the internet: 1 Dongle USB (Device Manager calls "Remote NDIS based internet device for sharing". No problem connecting to the network and to the internet with this device. 2. built in WiFi adapter, "Intel Centrino Wireless - N 1000 and 3. External antenna for high power USB and USB «Realtek RTL8187» adapter Medium 1 and 2, I can normally connect to the network, get decent speed but he declines quickly and then to a random period, usually within a few minutes, I lose my internet connection, and finally my network shows disconnect icon. At this stage all 3 of my USB ports are locked up, removal of the WiFi device does nothing, don't disconnect sound and no USB device is recognized if I try their connection. In addition, Windows will not stop. I get a "shutting down" screen but it stays that way until the expiration time and finally restarts, screen asking if I want to start normally or in safe mode.

  Action taken:

  Several online sites checked and tried solutions including:

  RTL8187 uninstalled and reinstalled several times

  Uninstalled and reinstalled HP wireless several times

  Deleted (Device Manager, see all) entries while grayed, unused network

  So far, no joy, no change. Anyone have any new ideas? Thanks for any help

  Hi Raven,

  Do you have third-party security programs installed on the computer?

  Basically, if the internet works in safe mode and not works in normal mode, not applications or third-party security programs can be in conflict with the drivers from the internet.

  As a solution, I suggest to uninstall the anti-virus program and check if it works in normal mode.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Answer with the results so that we can help you even the question.

• Automatic update does not install 'ViewSonic - Bus USB and Ports, display controllers - ViewSonic VP2365WB.

  Windows update - AutoUpdate does not install 'ViewSonic - Bus USB and Ports, display controllers - ViewSonic VP2365WB. Any ideas? Thank you.

  Original title: Bus USB and Ports, display - ViewSonic VP2365WB controllers

  Windows update - AutoUpdate does not install 'ViewSonic - Bus USB and Ports, display controllers - ViewSonic VP2365WB. Any ideas? Thank you.

  Hide and unless the material was manufactured by Microsoft or the hardware manufacturer tells you that you should get the driver FROM Microsoft - do not install Microsoft device for material non-Microsoft drivers.

• Usb and Ethernet port does not work after update of windows 8.

  Hello

  I have a new HP laptop, and two days later the window updates automatically and my USB and Ethernet port stopped working. I returned it and got a new laptop and it is same thing. every couple of days that he update and refresh back to the old settings without losing my documents. I can't keep install my apps every two days after the update. Please let me know what I can do to update without having this same problem. If there is anything I can do so I have to return the laptop.

  Ben.

  Hi Ben,

  You can install the Windows updates manually by changing the settings of Windows updates.

  1. Open Windows Update in Control Panel by dragging it from the right edge of the screen, typeSearch (or, if you are using a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clickingSearch), get into Windows Update in the search box, by typing or clicking onsettings and then type or by clicking install optional updates.

  2. In the left pane, tap or click change settings.

  3. Under important updates, click the following option:

     Download updates but let me choose whether to install them.

  4. Under recommended updates, select the give me updates in the same way I receive important updates recommended , and then click OK.

  Manually install the Windows updates and find the problem causing the update.

  I hope this helps.

• iPhone and iPod is not charging on the computer of Windows 8

  Original title: iphone and ipod problem

  my phone and ipod are not being charged by my computer. and they are not picked up by itunes.

  Ive tried all my usb ports and 3 different cables and still nothing. my cables work perfectly well in wall Chargers.

  But my computer is doing to make the noise of a camera being plugged in but after that else nothing happens at all.

  Hello Teo,

  Thanks for posting your query on the Microsoft Communities.

  It might be difficult when things don't work the way it should be on your computer. Power management problems or iTunes can lead to such problems. However; We will try to refine to see what is causing this problem and try to fix it.

  Please follow the steps mentioned below:

  Method 1:

  I suggest you run the troubleshooter of material and check the status of the issue. The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps:
  a. press the Windows key + W.
  b. type Troubleshooting in the search box and press enter.
  c. Select material and audio in the utility window.
  d. Select material and devices under devices option.
  e. follow the instructions on screen.

  Method 2:

  Follow the steps mentioned in the blog and check following:

  http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/08/help-after-installing-Windows-8-1-my-USB-device-doesn-t-charge-or-it-disconnects-and-reconnects-frequently.aspx

  Important: the above article contains steps that tell you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow these steps from the following link: http://support.microsoft.com/kb/322756/en-us

  Method 3:

  If the problem persists, I suggest you follow the steps in the following link:

  iOS: device not recognized in iTunes for Windows

  http://support.Apple.com/kb/TS1538

  Please answer us on the State of the question to help you further.

• Reflections on the single port USB - C on the new MacBook

  Personally I'm not a fan. I hope they put several on the new MacBook Pro. What happens if you plug in a monitor and an external hard drive during loading and also a key usb and SD card?

  There are products from Apple and other companies that give you more ports and capabilities that include docks for a desktop computer.

  I'm fine with things as they are, but I also have other systems. For me the point of the MacBook is something with size and weight more like a Tablet and capabilities beyond a tablet. My MacBook is new, but so far the high scores.

  So far, my experience with the MULTIPORT USB adapter - C is good.

• Multi-port USB adapter for the MacBook USB - C Port?

  Hello

  I'm in pain, trying to find a USB adapter multi-port for my MacBook 2016, which only has a single port USB - C which is also like a power port.

  I already done is connect the WD My Passport drive external HARD to the MacBook via an adapter HooToo, that to see any HARD drive mounted in OS X.

  OS X makes a sound when it is connected, but apparently the adapter provides insufficient power for the HARD drive needs to be loaded.

  I got Belkin USB multi-port here:

  http://www.Apple.com/us/search/USB-ports?SEL=accessories & src = SERP

  But it is not certain if one of them provides enough power, so I would try rather than a person has used successfully with a MacBook and an external HARD drive,

  If not, opt for a multi-port adapter USB brand Apple.

  Please let me know about your experience or an Apple adapter.

  Thanks in advance

  My Apple 3 port works as advertised. The USB port has a perfect compatibility with the old and readers USB 3, my adapter Ethernet USB Apple and Trendnet USB adapter that I use in series. This includes the perfect function with a 10 VM Windows via VMware Fusion.

  A non - Apple C to an adapter that I bought works fine too. I don't see the brand on this subject but he chose via Amazon ratings. There were some with higher ratings, so that's how I made the choice.