Portable win 8 frequently loses connection wifi

Similar Questions

• Intermittently lose connection WiFi. XP Pro, Intel Pro/Wireless 3945ABG

  I recently recovered from a nasty virus and my computer seems back to normal except an annoying problem. Periodically, I lose my wireless connection. It happens on multiple networks, so I know it's the computer. I updated my drivers (all who were on the Dell support site specific for my service tag) and still not fixed. I used to be forced to restart, but now (after the driver update), I can use the Device Manager to disable, and then enable the wireless adapter and the connection returns every time... but its obviously annoying.

  Any suggestions would be helpful. I have a Dell Latitude D630 running XP Pro. The
  card is an Intel PRO/Wireless 3945ABG. Thanks in advance.

  You may not say anything on the power saving mode, but the link you posted has done. None of these things worked anyway.

  However, I found a solution that others may find useful. Apparently the Dell Web site is not exhaustive with regard to the pilots. I found a update for my driver wireless on a third party site, Drivermax.com

  After the update, the problem has been resolved. DriverMax is an application that is free to download and much appreciated on download.com

  Free version allows only download driver per day, so be sure to choose carefully.

  Lesson learned: sites Web of manufacturers is not always the best place to find updates driver

• My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  Hello BrooklynWM!

  I definitely want my iPad to stay connected to the Wi - Fi connection while I use it.  Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping.  We can try a few things.

  Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported

  After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.

  Best regards.

• All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  Tell us what event preceded "all of a sudden" - something to do with the software or hardware environment

• Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

  Try the following steps please

  The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• FP 6700: Hp 6700 loses the wifi connection

  Guard 10 Windows printer Hp 6700 lose the wifi connection that requires powering off the coast of the printer running and the cable/modem.  I tried the suggestion given in the forum, but does not solve the problem. The printer is located in 2 feet of cable/modem D5001 model pace and I have the latest software and firmware installed.

  Anyone have any ideas on how to solve this problem.

  Thank you.

  Move the 6700 further pace or connect an ethernet cable to the rhythm of the 6700.

• WiFi loses connection intermittently and the erasure of the arp arranges

  This has been asked before many times, but none of the above worked for me so far.

  I have a MacBook Pro with El Capitan on it. From time to time, usually 5 to 10 minutes,

  my connection drops and I can browse the internet. As:

  4 bytes of 8.8.8.8: icmp_seq = 7646 ttl = 53 time = 13,091 ms

  64 bytes of 8.8.8.8: icmp_seq = 7647 ttl = 53 time = 17,035 ms

  64 bytes of 8.8.8.8: icmp_seq = 7648 ttl = 53 time = ms 13,716

  Request timeout for icmp_seq 7649

  Request timeout for icmp_seq 7650

  Request timeout for icmp_seq 7651

  Request timeout for icmp_seq 7652

  Request timeout for icmp_seq 7653

  Request timeout for icmp_seq 7654

  Shooting, then turn on the WiFi will fix the problem, but I tried to limit the problem

  and I discovered that deleting IP of the route in the arp table will also fix connectivity

  immediately:

  $ sudo arp d 192.168.0.1

  Request timeout for icmp_seq 7718

  Request timeout for icmp_seq 7719

  Request timeout for icmp_seq 7720

  64 bytes of 8.8.8.8: icmp_seq = 7721 ttl = 53 time = 10,947 ms

  64 bytes of 8.8.8.8: icmp_seq = 7722 ttl = time 53 = 11,966 ms

  64 bytes of 8.8.8.8: icmp_seq = 7723 ttl = 53 time = 12,576 ms

  64 bytes of 8.8.8.8: icmp_seq = 7724 ttl = time 53 = 11,058 ms

  64 bytes of 8.8.8.8: icmp_seq = 7725 ttl = 53 time = 15,173 ms

  Deactivation of unicast arp has NO had no effect either:

  $ sudo sysctl-w net.link.ether.inet.arp_unicast_lim = 0

  Notes:

  -J' have two MacBook Pro at home. Other works without problem.

  -My phone and other devices work also with the same router with no problems.

  -The problematic MacBook works with other WiFi networks without any problem.

  What could be the problem?

  Yes, clear arp fix it. Very familiar with it.

  I had this problem for 2 years and more than 2 or 3 MacBooks, on El Capitan, Yosemite, and Mavericks.   I Googled it every 1-2 years months.  I captured packets and tested several access points... The best fix so far... is the arp compensation, and I have the automated at the moment:

  in a terminal:

  While true; make sudo arp - da; sleep 2; fact

  When the window is open, every 2 seconds, my arp table gets undervalued... and if I lose connectivity, the maximum cut is 1 to 2 seconds.

  I noticed that in some places, I don't have the problem... its as if my laptop reacts badly to some other customers on the same WIFI network.  This question makes me crazy, and I can't imagine how was such years.  If I don't fix it manually, I find myself for 30-120 seconds every few minutes.

• Satellite C660 loses a wifi connection when unplugged from charger

  I have a problem with my C660, when the charger is connected wifi works well, however, when I unplug the charger wifi loses connection within 30 seconds. This happens every time. I've updated the BIOS and no difference.

  It's the second C660 with this problem when I bought the first laptop, that was happening, so I brought curries and they replaced the faulty laptop, however, the same question with the second unit.

  We have 3 other laptops in the House and this problem happen with others, if this isn't a problem with my router.

  Forum search function and read some threads in the forum WiFi category could help you find the solution ;)

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59379&TSTART=0

• Possible PC portable HP Pavilion 15 15-e090se to connect WiFi 5 GHz?

  Hello

  I just want to check if possible PC portable HP Pavilion 15 15-e090se to connect WiFi 5 GHz?

  No. E3Z44EA3ABV

  Thank you

  Ajdee20

  Hello

  Go to Page 6 in this manual:
  http://h10032.www1.HP.com/CTG/manual/c03939658.PDF

  All the compatible wireless adapters listed for your model in the manual are adapter single band and operates on the 2.4 GHz ONLY band.

  Go to Device Manager and expand network adapters. You will see the names and model numbers wireless adapter.

  If the suffix of the wireless card description ends in bgn, then this is the only map of a single band (2.4 GHZ). If it ends in abgn or agn, then this is a wireless card dual band (2.4 GHz/5.0 GHz).

  Computers in most portable consumer HP are equipped with single band card.

  You can use the dongle USB wireless adapter Alternatively.

  Concerning

  Visruth

• Connection WiFi guard fall on my new laptop of HP ENVY m6-k025dx Sleekbook.

  Hello

  I just got my laptop new HP ENVY. Name of product: m6-k025dx. It works on 64-bit Windows 8. I feel a sudden loss and frequent my Wifi connection. When it disconnects, I don't even connect it to cursor (that slides off the right side of the screen and displays the network list) by clicking on the network down button to the right of the screen. I have to restart my laptop to connect again and after 5-7 minutes, I lose again.

  I have tried many suggestions on the amendment to the Plan of power for maximum performance and uncheck "Allow the computer to turn off this device to save power", but nothing seems to work.

  The network driver is Intel Centrino Wireless - N 2230. I have also updated the driver and off Bluetooth and ethernet as part of suggestions found on the web.

  I don't know if it is a problem of Windows 8 / Intel / HP. Help, please.

  Nadeem

  From my own research, if you have an intel centrino N - 2230 network adapter and use 8 64-bit windows, you need a new driver. This adapter has connectivity wifi which are known for problems intel. Check here: http://www.intel.com/support/wireless/wlan/sb/CS-025332.htm and then contact an HP tech via chat and they correct Web site, download and install the new driver from intel. I tried to do it myself, and it did not work. The technology did for me by online chat and remote assistance. Do it for what they tell you it's a hardware problem. It's a problem of network adapter that requires an updated driver. Let me know if it works for you.

• Firefox frequently loses focus of the window

  It seems that Firefox frequently loses focus of the window when I opened a new page. It can be a bookmark, a link open in a new tab using CTRL-click left or whatever. The following scenario always translates into the window loses focus (for me).

  1. Open Firefox.
  2. Open this link and save it.
  3. Close, and then reopen Firefox.
  4. Open the page just a bookmark using the bookmarks list and do not touch the window.

  I read this page a day, so when I launch Firefox and open the page, I click on it in order to scroll, etc...

  Firefox 13, Windows 7 Home Premium 64-bit

  I wish this site had 'Preview' for its positions. Geez Louise.

  This can be caused by a recent update of Flash 11.3.

  See:

  • https://support.Mozilla.org/KB/keep-Flash-up-to-date-and-troubleshoot-problems
  • https://support.Mozilla.org/KB/Flash-crashes-or-does-not-load-Firefox-13
  • http://forums.Adobe.com/thread/1018071?TSTART=0
  • http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

  You can also try 11.2 Flash you can download it via this link:

  • http://fpdownload.Macromedia.com/pub/flashplayer/Current/Licensing/Win/install_flash_player_11_plugin_32bit.exe

• loss of connection WiFi

  Hello! I have a mac book pro 13 inch with piece of retina it a month or two ago, processor: 2.9 GHz Intel Core i5 memory: DDR3 6 GB MHz 1867 chart: running intel Iris Graphics 6100 1536 MB OS X 10.11.3 and I have tried to download league of legends (game) of the website of the game for a few days now , but whenever I try, wifi loses connection and then will start! (really, I can't even turn off wifi if I wanted to connect to a new network) it gets really annoying... anyone have an idea how I could fix this? also, when it does not download, it's extremely slow! the internet is surprisingly fast, it will download entire albums off iTunes in 30 seconds or less and netflix charges faster than you imagine! Please, someone who has an idea to help would be most appreciated!

  The guarantee gives the right to the free phone support for the first 90 days of ownership.

• Time Capsule loses connectivity

  I read several threads about people having problems with their wifi and their Time Capsule.  Son as:

  Problem WiFi fall on Time Capsule

  However, my problem seems to be just a little different and I was wondering if anyone had any ideas on what is the problem.  Sometimes I lose a wifi signal as the thread above suggests, but most of the time he manifests a little different.  In my case, I have a TC of 4th Gen (A1409) I have been physically power cycling about 5 times a day due to lost connectivity.  The TC in these cases never stops a broadcast signal, but the internet connection is lost.  This happens on all my devices (MacBook Pro, iPhone, Kindle, etc.).  The green light is on the front of the TC, which means everything is good, but its obviously not.  If I turned off the TC, then return on power, everything works again.  Because I have a success rate of 100% for connectivity at the time where the power cycling the TC, I am quite confident that this isn't the cable modem.

  Until I followed the instructions to reset the TC and decommission the FW to 7.6.1 on the other thread I just want to check that the proper action to take for this problem as well.  So, any help would be greatly appreciated.

  On a side note, I find it very disappointing reviews suggest these CT only last about 3 years until they flake.  It seems absolutely ridiculous given the cost of these things.  If I bought a router generic $15 maybe, but how can Apple do not have a product that lasts for more than 3 years?  If this is the case, I almost certainly will not replace it with a new TC... I'll opt for a standard wireless router and attach a network drive for half the price.

  I need to clarify my previous post a little.  I have my entire House wired Ethernet, although 95% of the vehicles used are wireless in the House.  That said, I have an AirPort Extreme, located upstairs in my house (the TC is in the basement).  AirPort Extreme is wired in the TC and acts as a bridge that runs from my network wireless in my house.  I named it differently, making it easy to know that I'm connected to point access.  When I lose the connection, wifi signal generated by the TC (AppleNet/AppleNet 5 GHz) is no longer detectable.  The wifi signal generated by my AirPort Extreme (AppleNet2) is detectable.  But even if you are connected to it, there is no internet connection.  Thus, not only the TC is down its wireless signal, its apparently lost all connectivity even for cable connections.  If it was just a wifi problem, whatever it is connected to my Airport, which is wired to the back of the TC, would probably stay connected, but they do not.

• My PC loses connection local and Internet after waking from sleep/hybernation.

  My PC loses connection local and Internet after wakes up from sleep/hybernation. The problem is solved by resetting the network card, but it is frustrating to have repeated resets every time the system in place to wake up. I am looking for a patch, I searched all the support sites and forums where there are similar problems that have been offered to different patches over time, but each of them has failed.

  Vista 64 SP2

  Hello

  Check the updated drivers for the NETWORK card and WiFi.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat above for network card (NIC) and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Also, check the power supply for the device management settings in device - double click Manager
  the device and the power management tab.

  ==============================================

  More if necessary:

  Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• WIRELESS DOESN'T WORK DOES NOT DIRECTLY PORTABLE WIN 7

  Cannot connect by using direct wireless portable Win 7. The printer is Envy 4500. Connection there is no Android device and is fully functional.

  Hello @RNC4899 and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have direct problems wireless.  I would like to help!

  I would say uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!