Portégé M 200 - on screen pointer is out of control

Similar Questions

• Satellite T130 - 10G Touchpad screen pointer gets stuck in random patterns

  Satellite T130 - 10G Touchpad screen pointer gets stuck in random patterns and laptop computer must be restarted to restore functionality
  The center of the causes of "touchpad button" toggle switch by pressing the touchpad pointer to enter a random State like two fingers to zoom.

  Sometimes, he'll be back to normal, but most of the time the computer should be put to sleep or restarted to restore functionality.

  a. I tried turn off all touch pad feature one item at a time and all, he still has some weird random State.
  (Did not try the impossible combination need $ to be interested but went to the 90% level)

  b. I tried disable the touch pad buttons offending and only using the mode tap the buttons and the problem still persist.

  c. Finally, tried bending the entire keyboard instead of pressing the buttons and it has also created the problem.

  This leads me to believe either the power key or flexion of the entire keyboard is originally is

  a. flexion of the touch pad causing the driver getting into a crazy State or require a recalibration.

  b. electrical connections causing the driver enter a crazy State or require a recalibration of bending.

  Note: I have reinstall the latest version of the driver.
  Also: American Toshiba support site that this problem exists in the notebooks of May.

  Also: The touchpad is too sensitive, which makes it very unusable!

  CAry

  Have you tried to install the operating system and check the functionality of the touchpad with the factory settings?
  Recovery image contains tested the touchpad and right and I don't think that helps the driver installation.

• Satellite Pro 6100: cursor moves out of control on the screen

  Hey guys,.

  I'm seriously going crazy right about now... my problem is the following:

  I have a Toshiba Satellite Pro 6100, Windows XP Professional with SP2, memory: 512 MB.

  About two weeks ago my cursor began to move up and down whenever I pressed the space bar. It has gotten worse since. My cursor moves out of control across the screen (there are usually in the upper right or lower left) and I can not recover. I know for a fact that it has nothing to do with my external mouse (optical), because this problem also occurs when I use my pointing device. Even in safe mode.

  The thing I've tried:
  Ran Spybot: Search and Destroy
  Ran Adaware
  Xoftspy RAN
  A ran Symantic Antivirus 10 (complete analysis of the system in safe mode)
  New keyboard
  New motherboard

  Nothing helps. I'm this close to format my pc. Does anyone have a suggestion of what to do?

  Thanks in advance!

  Hello

  I put t he understand. You have changed the keyboard and the motherboard, but you did not recover the OS with the Toshiba Recovery CD.
  The first procedure that you should do is the new installation of the OS before you change or replace anything on the laptop.

  Unfortunately, it is not easy to say why it occurs. A friend of mine has a similar problem with the cursor. The cursor has jumped on the screen and it was not possible to open applications. It has (or service) resolved with the replacement of keyboard.

  If the new installation OS doesn't fix this strange cursor, so I recommend you contact Toshiba.

• the iPhone screen will come out, may be due to the battery which distort in shape

  the iPhone screen will come out, may be due to the battery which distort in shape

  Make an appointment on the Apple store nearest to have rated free iPhone.

  Once the diagnosis is made, staff will explain your options.

  Make a Genius Bar reservation

  http://www.Apple.com/retail/Geniusbar/

• Lower third of my screen has blacked out. What should I do?

  Lower third of my screen has blacked out. What should I do?

  Hello

  1. what version of Windows is installed on the computer?

  I suggest you try to execute this fixit and see if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  It will be useful.

• Z3 Compact screen is "out of control".

  Hello world

  A few weeks ago my Z3C started having some minor freezes and screen has been banging typos causing occasionally, which is very annoying on a daily use.

  Yesterday, weaher cold (-7 ° C) just made it worse. My screen has become literally our control, as you can see on this vid:

  https://Vimeo.com/152559032

  The screen returned several times while I was handling in its normal position. Flippering black screens are actually the screen jump
   
  Android version 5.1.1
  Build number: 23.4.A.1.264
   
  Any solution?

  Thanks for your help!

  Try to repair the phone with Sony PC Companion.
  http://support.sonymobile.com/GB/tools/PC-companion/

• Problem with SG-200 and access point on VLAN

  I'm having some problems with the configuration of VLANS on the SG-200 and the WiFi access point. The access point (a TP-Link WA801N) is able to access the internet when it is plugged into a port that is on the default VLAN (1 PVID). If I plug it into one of the other VLAN then all clients connected to WiFi to lose access to the internet and can not access on the local VIRTUAL network devices. I've used this configuration with a Cisco WAP4410N of first generation.

  I'm not sure if it's something wrong with the way I configured the switch or a problem with the access point.

  The setup I have is:

  Modem/router ADSL (7800N billion)

  |

  -------------------Port 1--------------------

  |                                               |

  |               SG-200 08 |

  |                                               |

  ---3---port 8 - port

  |                    |

  Access point |

  (TP-Link WA801N).

  |

  SF - 100 D

  The port configurations are

  Port Mode PVID membership

  1 general 1 1U, 7U, 666U

  2 general 1 1U, 7U, 666U

  3 general 7 1U, 7U

  4 General 7 1U, 7U

  5 General 7 1U, 7U

  6 General 7 1U, 7U

  7 general 1U 666, 666U

  8 General 1U 666, 666U

  Iain,

  You have virtual local networks put in place on your router? The subnets that you use on each vlan? The router will give DHCP for each vlan?

  The SG200 isn't a fully managed layer 3 switch, it's just a "smart switch" so you can not actually be able to do simply only switch. A sg300 mode layer 3 would be able to do this because it is a fully managed switch.

  If the router is configured with the VLAN, vlan 1 unidentified, the rest the tag, the router-> SG200 port is trunking and the others as access ports on their vlan respective. Once the router is configured, this video contributor forum albums and Cisco employee David Hornstein is very useful to correctly configure the switch.

  Best,

  David

  Please evaluate the useful messages.

• Magic Mouse connected but no display on screen pointer

  Just pass on my iMac and Magic Mouse and not even connected. Mouse as connected but shows there is no pointer arrow on the screen. Please notify. If the mouse is broken how can I shut down the computer?

  What happens when you connect a USB mouse, if you don't please borrow or buy one, they are very cheap.

  Also, did you follow the troubleshooting steps in https://support.apple.com/en-us/HT204621

• Satellite X 200-252 screen flickers on desktop

  Hello
  I really want to upgrade my laptop to Windows 7, I tried RC front, x 64, and x 86. Now, I bought x 64 ultimate for my desktop so I decided to try it too on Toshiba Satellite X 200-252. Everything works perfectly, except for the video driver.
  PROBLEM: screen flickers on the desktop without reason. This happens even when I do nothing, all the seconds for example just to read a pdf file or watch the nice wallpaper I.
  -with the original preinstalled Vista Home Premium x 86 I try to update display driver is more recent than the 7.15.11.7605
  -with windows XP and drivers downloaded from nVidia
  -with windows 7 all versions, nVidia drivers, tried several
  -with windows 7 drivers of Toshiba U.S. site X 205 model (cost installation, no upgrade of Windowses)
  Glitter for me means one of the following:
  -for a fraction of a second, a part of the screen deforms
  -a few lines unexpectedly appear and disappear on and off screen for no reason
  -l' screen becomes black, in whole or in part and turns on OK once again, while a few milliseconds.

  What I tried to do:
  -the ONLY driver that works correctly under vista is the original and most recent 7.15.11.7605 of Toshiba, dated June 25, 2008. NO driver work correctly under Win 7 or XP.
  -Toshiba links to the nVidia site, where I can download newer drivers - supposedly I can, but screen flickers on all windows.
  -Model drivers Toshiba X 205 for Vista or Win 7 from the Web of Toshiba U.S. site also exhibit this behavior. This product is identical to mine both chipset and gpu.
  -Toshiba Software to install - (does not include video driver anyway, as far as I could tell)

  What I expect:
  -Si Toshiba could identify all they put tweak under their "last good"original driver, it would be good to know about this, although X 205 driver did not work.
  -Also if anyone successfully installed any driver newer than one mentioned display, please leave me a comment with a version or if they had need special tips AND if the display is stable.
  -A method to test the graphics card / memory on my computer to find errors, something in memtest 86 + flavor.

  Concerning
  Krzysztof

  Hello

  The Satellite X 200-252 was equipped with the graphics card or similar, as the Toshiba P200 of Satego European PSPBEE series.
  Try the display driver released for this series too.
  Maybe you could use a driver Vista Win 7 OS.

  The drivers are located on the page of the European driver Toshiba

  Good luck

• BlackBerry Smartphones error 200 + white screen due to the software update incomplete

  Hello.

  I was updating my Blackberry device software but I don't know if the update was successful or not, but it seemed to be the error because the data cable was leaked & he says I should go to www.blackberry.com/507.

  Then he handed over by itself, but it showed the error 200 with white screen behind. I have tried resetting clicked & remove the battery then re-inserted, but kept it appears error 200.

  Please help me, what should I do?

  Data cable was leaked?  Whatever that means, correct it or don't do it again and then reinstall or upgrade the operating system.  The following link should be helpful.

  http://BTSC.webapps.BlackBerry.com/BTSC/ViewDocument.do?externalId=KB10144&sliceId=2&cmd=displayKC&d...

• Smartphones blackBerry "BOLD" "App Error 200 (reset)" screen after update software phone

  Constantly received instructions to update for the software device/requirements, even if the device had been updated before with these updates. Hoping to avoid continuous requests to update the phone software, I went through the update phone software and "out-clicked" list items that were clearly not necessary (Hebrew, Norweigan etc.) and then the phone went into the screen "App Error 200 (reset).  I looked through all the reset options, including the removal of the battery and Alt/Ctrl and the led, but nothing works.  I have applications loaded on the phone too (garmin, etc.), but am willing to perform a complete reset (other form) in order to get the phone after «App Error 200» display (reset)  Tried all activities with the Device Manager, but nothing helps, phone not connected but Device Manager tries to continue his search when the phone is on the screen "App Error 200 (reset)", it is just stuck there - help!

  did you try this?

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB14115&sliceId=2&docTy...

  If it still does not work, I will try and help you find alternative

• How the help file c PORT pin [link] to start screen?

  QHM help file is packed for 64-bit Windows 8 by Canon corp. I have a QHM help file for my Canon printer, and it seems to work very well, but...

  Robert Aldwinkle forums seemed almost about to find a way, but everything he thought evaporates.

  C PORT behaves strangely in 64-bit Windows 8. Hold SHIFT and right-click, copy as path copy anything. Send to peak to almost everything in this universe, but there is no shipment to start; and so, we could accept Robert's initial find nothing sends anyway.

  In addition, you can have 2 two shortcuts to a file QHM named the same shortcut! Normally Windows should be able to name the second shortcut MP830 manual Visual (2). Oh no, there is no given name of Manual - Visual MP830 shortened when the shortcut is created by all means possible. The names Windows shortcut simply Visual MP830 manual.

  Yet, double-click Visual manual MP830 and the Canon utility Help opens. Is it only a feature of region 3, or is this global behavior? Is c PORT a help file in format CHM owner? East HARBOR master, a structure of link opening the content of help elsewhere? So many questions.

  How to paste a link to a file QHM help on Windows 8 boot screen?

  Hi Mark,

  I would like to inform you that executable only files that end with .exe file format can be pinned to start screen, the other files whose file formats such as .txt, or ".chm", "section" etc... cannot be pinned on the screen of Windows 8 start.

  If you have additional questions, feel free to post, we will be happy to help you.

• X 200 gel screen black tablet, Win7, sleep

  I posted about it before and never got any more far away yet, but as I found some new info I would repost.

  So I have a 200 x up, load (1.86 GHz, 4 GB of ram, Intel 5300, fingerprint, webcam, card reader, multitouch enhanced (multi-doigt)) with windows 7. It was fast, but I still have serious problems when it comes to sleep/hibernate implementation.

  Using the reliability monitor monitor, about 5 times a day (excluding the 10 times I might need sleep/hibernate) trying to sleep by closing the lid or using fn + f4, windows stops responding.

  Some info I get on this State:

  The status LEDS remain active. By pressing the buttons occationally will cause the hard disk activity, using the external wifi switch will always turn on and turn off the wifi, so windows still works.

  I can not connect by office remotely. It connects, allows to connect you, but then I see is a black screen and a blue circle of spinning and have to disconnect

  Very strange: Shortcuts seem to fail BEFORE it is a problem. Windows key + L, ctrl + alt + del, ctrl + shift + esc all seems to fail. I know when my sleep will not work by testing these first. I tried to use microsoft process Explorer to kill any running process, and none seemed responsible. So, it's probably a driver or a service related issue.

  I've spent most of my drivers to c:\SWTOOLS as recommended by the forums, tried disabling all non-essential hardware, uninstall anything I could. Still stuck and frustrated after a month.

  -Matt

  
  

• NB 200, white screen at startup

  Hello fellow toshibans!

  I have been using a nb200 of toshiba for about a year now. its been fine, I take good care of it, but when I tried to put it on the other day... the computer does not start.

  I have the toshiba logo... then the screen turns white with a small cursor flashing at the top left. WHY?
  my warranty is two weeks after the date... I took it to a specilist who took 40 books. for tell me, everything seems fine! ... the hard disk works and is recognized in the bios.

  I changed the order of bios etc... but I get a "check cable" message during boot.

  now, I understand that there are updates available bios...?

  (1) WHAT THE BIOS UPGRADE PACKAGE I USE IT BECAUSE I SEE A LOT?
  (2) HOW ON EARTH I HAVE ADD THIS UPGRADE WHEN MY COMPUTER DOES NOT LIGHT? -iv tried to add the bios upgrade latest for my USB... but at the start... it says "error".

  I hope someone can help as I have a month to work on it, my deadline is Thursday, and it's very serious for me.

  I thank for your time and effort and look forward to hearing from you soon.
  Mr. Aymen I have

  null

  A blinking cursor often means that Windows is damaged.

  You may need to use your recovery disk NB200 to reinstall Windows.
  If you do not have the time to create the recovery disk / USB key, you can order one on the Toshiba site.

  You can run Memtest to check the RAM for stability. www.memtest.org

• Does not begin with satellite L350D-200 - white screen

  Like similar cases:

  Turn on, hear the HD not spinning, nothing else, screen remains empty, no BIOS

  Checked and an external monitor
  Removed the battery ca > 1 hour, does not help.
  No SW/HW update, I'm aware off (other than the automatic updates)

  It looks like a failure of HW-> ASP?

  PZ

  Hello!

  > Looks like a failure of HW-> ASP?
  Yes, it seems that Yes! :(

  I m not a technician for laptop, but you've done everything you can do: remove the battery for an hour and checked with an external monitor.
  To me, it looks like a hardware malfunction

  The Satellite L350 is a new laptop and I guess that your laptop is still under warranty. The repair should be free.
  I think that it of the best way because the laptop technician can check each physical part of the laptop to determine the cause of this problem.

  Good bye