Z3 Compact screen is "out of control".

Similar Questions

• Screen flickered out of control. I stopped him, it's OK on the restart, but now what?

  Is this a HD failure? (I've replaced twice over the years). It presents the motherboard? Somethings obviously lacking. Apart from the backup, what can I do?

  Perhaps unrelated: I wonder constantly updating my browsers (doesn't matter which). I am running 10.6.8 I need probably put first before update of Safari, Chrome, Firefox...

  End of 2006, MacBook Core Duo; 3Gig (667 mhz) HD is 750 GB; running OS 10.6.8

  Hardware can have a fault that could be the cause of the shimmering screen.

  So maybe it's something to watch. There may be utility Console logs of

  the exact time of day (hours, minutes, seconds) with details about this situation.

  You can try to reset the computer by using the SMC reset instructions; the part of what

  can help is to be able to reset... In addition, a different reset NVRAM can have another effect

  and they cause no harm. This could be seen as part of troubleshooting, as it

  does not offer a cure for failing to display components or other material exhaust.

  • Reset the management system (SCM) controller on your Mac - Apple Support

  read this document to support before trying anything.

  • How to reset the NVRAM on your Mac - Apple Support

  Some users leave computer chime three times, reset, the use of this. Make sure that the audio is not muted.

  Given the age of the computer, there may be a UPS or any other room display could be

  exhaust. There are a few parts that could cause this symptom; and let the flicker

  occur when moving the display (open/close), there is a circuit of the logic board to display

  which may be replaced by a new cable or other part. And if the computer is still using

  the original hard disk drive which at is a moving part (rotation with pens) & could be replaced.

  • How to download and install Firefox on Mac - using Mozilla Firefox:

  https://support.Mozilla.org/en-us/KB/how-download-and-install-Firefox-Mac

  The browser. You should have no trouble using Firefox, because they have a version for use

  in Snow Leopard 10.6.8. That's probably the only browser to update for Mac Intel processor number now.

  A computer repair may involve the display inverter or other components, best contact

  a service provider authorized Apple working on older models of MacBook vintage and that

  can get the parts. The Apple Store is not going to fix the vintage computers, options exist.

  Or you could read up on some of the problems most currents & answers to see if your skills can

  be sufficient attempt a DIY repair. (Or use the guide to see what it can lead to repair?)

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider

  Although an Apple Store Genius appointment can be useful if they could test or review the unit

  unless he has a strange behavior during a visit, they may not be able to offer suggestions; generally

  a manager of the Apple Store Genius visit has little or no cost for advice. Former computer problems are

  usually outside their current Applecare, parts and warranty flow. And with some models,

  product knowledge is better an authorized Apple specialist or a well-known service location.

  They would be more likely to have sources of parts and knowledge on how to fix older models.

  • Core 2 Duo MacBook repair guides - iFixit.com:

  https://www.iFixit.com/device/MacBook_Core_2_Duo

  There are online repair guides, such as those of the iFixit.com site for Mac repairs and do this

  give you a good look inside the computer & parts appear as well as takeapart sequences.

  Sources for parts and service are companies that accept laptops during the expedition

  to their repair facilities; These can vary and are across the country. (Or several countries).

  Two I read on the United States, are not exclusive, but serve as examples: wegenermedia.com

  and powerbookmedic.com - I sent an Apple laptop to Alaska wegenermedia

  based on the good reputation of a few years. they did a pretty good job when I am the

  portable back (he was in very good condition, with original and software box) I finally sold to a

  type more aged 30 miles away who had never owned a computer before. He's 85 years old & used 5 years.

  I have provided two years of support (like a neighbor in a small, sparsely populated area) & helped him learn.

  And did not offer to have helped him understand the internet, wireless, printing and so on.

  If the computer you may be worth the cost to check it out to the course, or you might get another almost

  like that, already repaired for what companies can charge to the difficulty that one. I have a MacBook

  (MB1.1 1.83 GHz 13 inches) with 2 GB of RAM, disk HARD 160 GB, OS X 10.5.8; and it flickers sometimes.

  The unit still works better if open and set up as a desktop with USB keyboard & mouse so unit

  the screen does not move much. So that much less flickers in this situation. You mileage may vary.

  Good luck & happy computing!

• Satellite Pro 6100: cursor moves out of control on the screen

  Hey guys,.

  I'm seriously going crazy right about now... my problem is the following:

  I have a Toshiba Satellite Pro 6100, Windows XP Professional with SP2, memory: 512 MB.

  About two weeks ago my cursor began to move up and down whenever I pressed the space bar. It has gotten worse since. My cursor moves out of control across the screen (there are usually in the upper right or lower left) and I can not recover. I know for a fact that it has nothing to do with my external mouse (optical), because this problem also occurs when I use my pointing device. Even in safe mode.

  The thing I've tried:
  Ran Spybot: Search and Destroy
  Ran Adaware
  Xoftspy RAN
  A ran Symantic Antivirus 10 (complete analysis of the system in safe mode)
  New keyboard
  New motherboard

  Nothing helps. I'm this close to format my pc. Does anyone have a suggestion of what to do?

  Thanks in advance!

  Hello

  I put t he understand. You have changed the keyboard and the motherboard, but you did not recover the OS with the Toshiba Recovery CD.
  The first procedure that you should do is the new installation of the OS before you change or replace anything on the laptop.

  Unfortunately, it is not easy to say why it occurs. A friend of mine has a similar problem with the cursor. The cursor has jumped on the screen and it was not possible to open applications. It has (or service) resolved with the replacement of keyboard.

  If the new installation OS doesn't fix this strange cursor, so I recommend you contact Toshiba.

• Portege R600 - the touchpad cursor is out of control

  I have problems with the touchpad on a Portégé R600 running Windows 7.
  The cursor is out of control.

  When I'm scrolling a page and you have to push the slider on the page, the screen scrolls down out of control.
  Sometimes I can fix it up by double tapping the touchpad, but also often, it does not work.

  When I type the cursor will jump to another area of the page and insert the typing it.
  The combination of these problems sometimes makes the laptop almost unusable.

  I noted that several forum users have brought up the variations of this problem, but received no response.

  Anyone can shed light on how to fix?

  Hello

  I think that it s a temporal question regarding the sensitivity of the touchpad settings and the Microsoft windows OS.

  First, you must change the settings for the touchpad as PalmCheck sensitivity and sensitivity to touch.
  You can do this in Control Panel-> mouse-> tab-> settings the touchpad device settings

  In addition, you must make sure that the operating system is clean and that some background process don't affect the functionality of the touchpad. In many cases the touchpad don't work properly because of system overhead.
  Clean the registry with CCleaner, don't disable some no necessary process in msconfig and at least update the touchpad drivers.

• color laserjet 2840 scrolling out of control control panel

  My HP color laserjet 2840 Control Panel scroll out of control.  The screen lights up and you can read "Hewlett-Packard", but nothing else.  Under the words "Hewlett-Packard" that seems to be something (probably the word "Ready") scrolling to the right on the left of a way very fast, unreadable.  I can't print with this problem.

  I recently installed a mod for additional memory, but preinted fine a few days before, so that's not the issue.

  If anyone has any idea how I can return to the "Ready" State, I would really appreciate it.  Thank you.

  Thank you for the reset option.

  Since my original post, I called HP support and they told me that they don't support any more of my printer.  I was even unable to discuss the issue, which has been quite disappointing.

  I ended up out the memory mod that I mentioned in my post and the screen of the printer stop scrolling.  I had the feeling that it was the question, because it was the only variable, but it was the good mod, so I wasn't sure.

  In the meantime, I was forced to buy a new printer because I needed one and now I have an extra.

• Use the Spotlight UC is out of control without reason

  I find more and more Mac running 10.11.4 where Spotlight is just out of control without no reason that I can discern.

  If nobody is logged on, Spotlight uses no processor.

  As soon as someone connects, Spotlight resumes the process of using CPU number one.  He is currently at 166,4% (of multiple cores).

  No matter if I disable mdutil and kill Spotlight... Spotlight returns and eats CPU.

  Reboots don't matter.

  10.11.4 reinstall combo did not help.

  Clearing the cache didn't help. / System/library and / users.

  Create a new user and login, Spotlight jumps to first place.

  Secure startup, Spotlight pops up.

  Network cable, no difference.

  First aid was clean when it is started from the recovery Partition.

  What the hell is happening here?

  Two things come to mind:

  1) restart mode without failure, then normally again

  (2) force Spotlight to reindex

• Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Hello...

  Force restart your iPhone > press on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  Then try to add a card again > define and use the Apple pay on your iPhone

  And make sure your bank / card is accepted for use with pay Apple > Apple pay participating banks and store card

• I have Toshiba laptop with Windows Vista Home Premium. my cursor keeps going out of control and autour jumps, I'm not very computer and need someone to talk me through any help! ____

  How can I stop my cursor jumping out of control, I have windows vista home premum pack use a touchscreen Tablet

  Hi Mypoppy,

  Exactly when this happens to you (using a particular application or game)?

  The same thing happens if you use an external mouse?

  Contact Toshiba technical support to check if there is no update touch pad software. Follow the link given below to Toshiba support

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my screen is out of wack after, I tried to install winow 7

  After that I tried to install Windows 7, (he failed because my computer is not equipted with so much) now my screen is out of wack. any help

  I fix, with hammer lol

• HP Pavilion Dv4 Touch button is out of control

  Hi, I am new to HP and all that, but there is something wrong with my laptop. My laptop, HP Pavilion DV4, tap the button when out of control. Especially my volume control. The volume when up and down while I'm trying to hear my songs or watch a video. I hope you can help me with this. Thank you.

  Hello

  Try the following.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• My update screen shows the last control updates has been 14.6.16 to the 08.01 and the update to install has been KB3035583 on 25.5.16 to 23.02.

  * Original title: look for the updates ms7

  My update screen shows the last control updates has been 14.6.16 to the 08.01 and the update to install has been KB3035583 on 25.5.16 to 23.02.  Since 14 June I repeatedly ran checks the updates, but these controls are never successful as never - end research I just saw the "check updates" message, but the check never ends.   Why is this?

  The Windows Update client cannot manage a KB3161664. Download and install it manually in advance. Links provided here:

  http://Wu.krelay.de/en/

  Be sure to not do a search running in background.

  Best regards, VZ

• Portégé M 200 - on screen pointer is out of control

  When I right-click on a document, the worksheet, the image, in a folder, or cut/copy/etc, the pointer on the screen sometimes goes haywire. I have no control of the mouse or pointer. If the pointer on the button of the drop then for awhile, this function becomes highlighted, usually I have to press ESC and then right click again.

  This happens only once per document, after he made his "thing haywire" mouse / pointer behaves normally, although other documents, spreadsheets, etc. in the same folder will show the same problems as we, for once. This happens in any folder, or on my network drive.
  This experience of other users to 200 M?

  Hello

  It's a very strange problem.
  I don't know why this is happening. But I guess it must be something wrong with the hardware. Maybe the mother or the keyboard.
  In the past I had a very strange problem on my laptop. It was not a Toshiba laptop. The unit will stop if I opened a site in HTML. It happened only with HTML sites. I know it's strange but true. I contacted the service and he changed the jury.

  Well well, since the motherboard, replacement of all work fine. But I mean, it's a lot of strange problems occur without knowing why. I think you should contact Toshiba service in your country.

• g-mail screen too big, none controls don't like file Favorites see the

  Controls the downloaded new email from Firefox, now the screen is too large to display the file, or no label on top, can't close, browser etc information

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  If you are in full screen view then hover over with the mouse upward to make the bar appear Navigation and tab bar.
  Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

  You can check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Screen blacked out how I can restore

  my screen has blacked out how to restore it

  Try to force your iPad to restart. Press the sleep and home for about 20-30 seconds. If you see the silver Apple, let go and let him complete restart and see if your screen at the back

• iPhone 6s more screen freaking out/no answer

  My iPhone 6 s more about 2 weeks ago and I have this problem that after having unlocked the phone or after a time random usage display freaks out or just not responding. I lock and unlock the device, and I hope that I can use it for a few minutes. I noticed that it often freaks out after the use of 3D Touch, but even in this case, the problem appears. I did the reset with and it did not help. I also did all that apple wrote on their website. I wonder if it's a hardware or software problem. It's very annoying and I'd appreciate any help. I was eager to make my iPhone after fight with android and now I'm pretty disappointed. (And Yes, my screen is nice, clean and dry)

  Take the test/diagnosis. There is really no way to diagnosis remotely your question. I suggest a visit to the store rather than to have to lose you time trying things that might or might not help.

  Barry