Satellite Pro L670 - 11 d is not an external keyboard

My Satellite Pro L670 - 11 d is not an external keyboard (PS2 connected via a USB adapter). When connected, the keyboard lights blink once and that's it. The keys do nothing. This happens if the connection before or after the start. I use Windows XP. Any help is appreciated!

Hello

You need to update drivers chipset makers of these functions:

http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

Choose your model and download, install it and restart

Tags: Toshiba

Similar Questions

  • WiFi for retired on Satellite Pro L670 - 11 d

    My Satellite Pro L670 - 11(d) does not connect to internet (Internet Explorer) wireless despite a good connection to the router. Router works wirelessly with other laptops and it connected with a cable. It has been lowered to Windows XP and downloaded wireless network adapter is Broadcom. Any ideas/suggestions?

    Is the card properly installed wireless (Device Manager)?
    You can activate using the FN + F8 key combination?
    Have you checked all the WLAN settings?

    What did you already get this working correctly?

  • New Satellite Pro L670 - 14 M turns on if the charger is plugged?

    Hi all

    New to the forum so grateful for any help on this matter.

    I bought a brand new laptop Satellite Pro L670 - 14 M last week. Now it works fine up until today. The last time that I used it while just running the battery was Monday night. I was working on the laptop, send email etc. today, and I decided to change rooms. For some reason, I still have to discover that I disconnected the charger from the wall (instead of simply unplug the charger from the laptop) so that it was plugged into the laptop and the laptop just turned off much to my shock. It was sparking that I saw the decision-making that I removed the CAP, but now the laptop lights not unless supply current is connected. If I unplug the charger, the computer does not illuminate.

    Now, my first thought is I (crossed beams) killed the battery, but the strange thing is, when the laptop is plugged in and turned on and I'm on my screen and I click on the battery icon in the taskbar it States 94% available (plugged in, load)

    While I wait for some answers I hope I shut down the laptop and leave the charger plugged in to see if the battery has loaded more than 94%

    Hello

    I think that the BIOS update would be worth a try in your case. Take a look at the Toshiba driver download page:
    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

    But before you start the update: make sure that you are logged on as administrator and close all running programs. Unzip all files from zip archive first.
    After update successful BIOS load default settings in the BIOS.

    Are you using the original Toshiba battery and AC adapter or they are 3rd parties gone?

  • Vista drivers for new Satellite Pro L670 - 14L

    So I have been serching for a laptop of decent game and found: Toshiba Satellite Pro L670 - 14L to be a good combination power/price
    but after reading some reviews, I discovered that many people's complaint that the toshiba drivers are not updated.
    that seems to be true because the latest drivers for my P300 with 4500 m are 2008!

    So, I checked for L670 Vista display drivers and did not find one! Even for Win7 do not seem old already,
    is that mean Toshiba is not compatible Vista more? I have to use windows 7 only?

    I can see in the specifications of the laptop your laptop came with WIN7 64 BITS HOME PREMIUM.
    Can you confirm this?

    Why are you asking about the Vista drivers if you got the new OS to Win7. You want to use Vista or what?
    I want to say Win7 is much better than old Vista OS so I put t understand what you exactly want. To use Vista or you ask here for more recent WIn7 display driver?

  • Satellite Pro L670 - 11 d and Dynadock U10 problem re-docking station

    This my first post on this forum - I hope I have the right category.

    We have a user with a Satellite Pro L670 - 11 d attached to a port replicator Dynadock U10 USB.

    Everything seems fine, except when press us the disconnect button (or select eject Dock) the laptop leaves the great.
    However when we try to anchor (for example after a meeting of bureau) it does not recognize the usb connection and docking station won't. We usually have to restart at this point. We are attentive to reconnect to the same usb port.

    Has anyone seen this problem and know a fix?

    Thank you

    David

    Hello

    Have you noticed this problem only under this Dynadock U10 or perhaps with the external USB HDD too?
    In my opinion, it sounds a bit like the issue of the BONE and not like the Dynadock question.

    I would recommend this control by using a USB HDD.
    Connect the USB HDD to the USB port as well.
    Then, disconnect the USB HDD and unplug the laptop HARD drive. Reconnect the HARD drive and check if the HARD drive would be connected again.
    If the same thing would happen with HARD drive, you should check the USB port
    Maybe the chipset driver will need to be updated

    But if the HARD drive is raccorderaient ok and if the question does not seem to be using the HARD drive, then, it would be necessary to check the Dynadock maybe reinstall the Dynadock from the software again.

  • Which hard drive Solid State for Satellite Pro L670?

    I have a Satellite Pro L670, I need to configure for presentation and having to re - load operating system anyway.

    Rather than write the existing drive too much, I thought that it would be best to get a second to adapt instead.
    Replace the current (obsolete) rotation drive with a solid state, it seems to me the best way to go.
    Has anyone equipped with a hard drive to a Satellite Pro?

    For budget reasons, I plan to go for a capacity of 120 GB that will be enough.

    However, I've yet to discover at Toshiba they could recommend. Anyone else gone this route?

    Hello

    Theoretically, any SATA SSD drive should be compatible because the laptop supports a SATA controller.
    But in some cases, it might be possible that an SSD would not be treated properly. In such cases, SDD drive manufacturers provide different firmware updates

    So before buying an SSD drive check the support pages of the manufacturers of SSDS for more details would perhaps have a firmware update

  • Satellite Pro L670-103 screen is dark - external monitor ok

    Hello

    Screen goes black in my Satellite Pro L670-103 while playing games. It is not completely off, but very very dark.
    System is activated and works while its happening. No flickering, changing colors.
    On the external monitor (TV via HDMI) everything works fine (so I guess that the GPU is very well).

    The beginning I had to restart the laptop and screen was once again but now it does not work and I have to wait a few more hours a sound goes on again just by itself (im leaving laptop on).

    I only use the approved oryginal drivers.
    System Windows 7 pro 64
    I guessed it might be the display inverter, but someone from the point of laptop repair told me that because my screen is RUN there is no converter and problem is with the screen itself.

    I spent hours reading various forums and UPS has been my best guess.

    Post edited by: Cezar_1

    Hello

    I think that its problem of converter FL.
    The FL inverter controls the backlight of the internal display.
    I think I get m with my suggestions because the external monitor looks ok.
    So it may not be a driver issue not a GPU problem

    Get in touch with the service in your country then must check this part

  • Satellite Pro L670-18F - pilots missing after updating BIOS

    I have a Satellite Pro L670-18F and I recently updated the BIOS to version 1.5, recommended by the site, but now my internet speed is VERY slow and I have some devices in the Device Manager without drivers related to the bios (from Googling) and so I realized that the bios has been a problem.

    Does anyone know this laptop came with to downgrade the BIOS version? Also, if I reinstall windows will I receive a new bios version or will it would not affected?

    Hey,.

    Did you download and install the correct version of the BIOS of your laptop? Satellite Pro L670-18F belongs to the series of PSK3FE AFAIK, so have you chosen BIOS for this series of model?

    In addition I recommend you load the default settings in the BIOS. Just press F9 key if you are in the BIOS Setup.

    If you reinstall Windows, the BIOS will not be affected. BIOS and Windows are different, you will always have the latest version of the even you change your operating system.

  • Satellite Pro L670-18F - plasticky rattle on the lower part of the keyboard

    Brand new L670-18F a plasticky rattle on the bottom of the keyboard and the whole area of the keyboard.

    Anyone experienced this?

    Hello

    I m not Satellite Pro L670 owner but in my opinion it of difficult to discuss these issues without seeing and hear it.

    From my own experience, I can say that I have two laptops Toshiba and I can t view all rattle plastic. Everything is ok, the quality is perfect.

    If you think that it s something wrong, you should get in contact with a service provider authorized in your country. Guys can take a look at your notebook and tell you if it of ok or not. :)

  • Satellite Pro L670 - 16Z BSOD after start and an external monitor

    Hello!

    I have a strange problem with two Satellite Pro L670-16Z. I connected to an external monitor. After changing the settings to extend the windows desktop, I rebooted the system.
    Then I gott a blue screen. I disconnected the screen external, nut, this is not enough. The system does not start. I always get a blue screen.
    Systems running Windows XP. I have this with both of them with different external monitors.
    I can boot a BartPe. I did correct the systems yet. The systems are very cool, works only for 14 days.

    Any suggestions?

    Concerning

    Stephan

    Are you using the original recovery image Toshiba WXP?
    Can you start Windows XP Home edition in safe mode?

    The port on which you are using to connect the external monitor?

  • Satellite Pro L670 - 18F PSK3FE Webcam works become "unknown device".

    The * webcam * on my * Satellite Pro L670 - 18F PSK3FE * who is running * Windows 7 64 - Bit * a well worked until this week. My notifications bar started to say * "unknown USB device" * and when when I went to use the webcam it no longer worked.

    When I disabled the webcam in the BIOS the notification has stopped, but when I turned it on the notification came back again to the top. The unknown device is clearly the webcam.

    I updated my BIOS and tried the system restore.

    I also downloaded the driver for the webcam of http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK and have tried running that - + but it NEVER seems to complete the installation. + I have will continue to try to reload the driver and see if that helps, but from now on, I do not think that the pilot will help.

    If it is just a driver problem, someone could suggest how to get the driver to install really :-(

    I am now at a loss. I'm not sure what to do now. Suggestions?... + Please! +

    Hello

    Unknown device means that the driver is not installed.
    I think that the installation of the webcam driver should fix it.

    As face recognition also use the webcam, I recommend you to uninstall this tool as well as the older version of the software of the webcam.
    Both (or just face recognition) should appear in Control Panel-> software

    Now download both applications to the driver page.
    Start with the installation of the webcam driver:
    (1) unpack the webcam driver package

    (2) the TC30049700N.exe may also be decompressed (right click-> extract here)

    (3) now you should see different files exe, dll, and others attempt to run setup.exe to start the installation. If this does not work, go to Device Manager, mark (webcam) unknown USB device and install the driver pointing to the folder that contains the files of webcam driver. The system should automatically recover dll files.

    (4) restart the laptop and follow with face recognition software.

    Good luck

  • Satellite Pro L670 - 14 M and SATA 6 GB/S Support

    Hello

    I recently bought an SSD (Crucial M4) for my Toshiba Satellite Pro L670 - 14M. He behaves well and certainly improves performance. However, when I test my SSD benchmarks, it reaches only about 230 - 260 MB/s reading speeds on sequential when it needs to get up to 500 MB/s as advertised.

    I'm assuming it's because my SSD is running via SATA 3 gb/s, so I ask, my laptop does support SATA 6 Gbps? If not, this isn't a big disappointment, although it would be great to have up to 500 MB/s sequential read speeds for this performance gain.

    Someone can confirm on the question of whether my laptop (Satellite Pro L670 - 14M) supports SATA 6 Gbit/s or not?

    Hello

    The laptop is equipped with a Mobile Intel HM55 Express Chipset and the Intel Core i3 - 330 M processor.

    That's why the SATA II controller agreed that 3 Gbps

    Welcome them

  • Satellite Pro L670 - battery - more control

    Is it possible that I can have my laptop plugged in with the battery not charged inside? In many laptops, for example my Dell Latitude E6500, there is such an option.

    I don't see a Toshiba Satellite Pro L670, but there may be some software? I have not found anything like this until now.

    Sorry for my English.

    Akuma is right.
    On Toshiba laptops, you can use the standard power settings available in options power and additional power options are available in advanced in the tool of Toshiba Power Saver, power options but there is no option for something like this.

  • Satellite Pro L670 - size of the Excessive recovery partition

    Hello

    New to this forum I have just bought a new laptop of Toshiba Satellite Pro L670, is great so far, but I have a question I'd like to solve.

    It has a 500 GB hard drive, which will be more than enough for some time yet, but I'm not satisfied with the way it is partitioned, usable space is divided into 232 C: and 232 GB D: that has the data folder HDDRecovery on it. Now, I know that I can still use the partiition for data, but I prefer to keep all my files in one place and the usual locations of Windows on the C: drive.

    What is the best way to recover all my hard drive space, Windows allows me to shrink the D. partition, but cannot extend the C: partition into free space created as the recovery folder is in the way. Thought copy output folder then recreate a smaller partiiton D: but he did not like me trying to move the folder either!

    ID of burn recovery DVDs can I safely delete the D: partition? I prefer to keep the disk but with a bigger drive C: is the highest priority!

    Congratulations to all

    Steve

    Hi scoobasteve,

    > What is the best way to recover all my hard drive space
    There is no better way. There are many options for the creation of new partitions because some people prefer a single partition, other people using a lot of partitions.

    Don t worry folder HDDrecovery!

    For example, I installed all my programs/games on the first partition C: where I installed Windows as well. This partition uses 50% of HARD drive space.
    Then I have a second partition D: with HARD drive recovery record. He s using the other 50% and on that, I've stored my files like photos, videos, music, documents, etc. No program, but all other files.

    In my opinion that s ok because I have to run HARD drive recovery, only the C: partition is removed. My important files are still on the D: partition after recovery of HARD drive. In addition, each week, I create a backup of all files on D: partition wait folder of HARD disk recovery. That's why I use Acronis True Image, it records the image on an external DRIVE connected via USB drive.

    Then why delete disk HARD recovery file?
    Of course, you can remove it but create the before recovery disk! After you delete the folder, you are not able to do this more!

  • 8 GB ddr3 on Satellite Pro L670 - 14L installation is possible?

    I would buy this laptop and I need to know something about its capabiliities of upgrade:
    -Can I replace the module 2 GB with 2 modules of 4 GB (8 GB total)
    -can I mount a second HD on this model?

    > - Can I replace the module 2 GB with 2 modules of 4 GB (8 GB total)

    After it's specifications:

    http://UK.computers.Toshiba-Europe.com/innovation/product/Satellite-Pro-L670-14L/1086890/toshibaShop/true/

    standard: 2 048 MB
    maximum extension: 8 192 MB
    technology: DDR3 RAM (1 066 MHz)

    You can spend up to 8 GB DDR3

    > - can I mount a second HD on this model?

    I'm not familiar with this model and do not know if there is an available slot. but you can use the external hard drive.

Maybe you are looking for

  • Satellite A80 - video controller (VGA Compatible) driver missing

    Hello Recently, I reformatted my laptop Satellite A80 recently and after you have reinstalled Windows XP, the video controller (VGA Compatible) driver is missing under my devices. I tried to search the Internet and the Toshiba site, but found nothing

  • format string IF (always kHz)

    Hello I'm reading values from rates to sample different RF bands DBL and using the value to create a file header to store binary data complex 32IQ to the file. I use the format based on string to do, but I still want to be represented in kHz, the sam

  • Windows Vista is not working or booting from CD

    This ISN'T THE START OF THE CD OR ANYTHING.I DON'T KNOW WHAT TO DO.  AS HE IS NOT RUNNING THE BOOT CDSHOULD NOT BE F8 KEY OR F12 OR F2 IT DO NOT TAKE ANYTHING.  Thank you. Original title: WINDOWS VISTA 32-BIT HB DOES NOT AT ALL

  • History files is displayed in IE

    All my history files are in my registry and I have my history files configured to record for 20 days.  When I go to my history tab in IE only a few items always appear on the hundreds that are there. Does anyone know what might prevent the view histo

  • AppName-debugging features in Simulator

    I did a search on the forums, but couldn't really find anything, so I was wondering if someone else using Burrito has faced this problem. Basically, I give my app a name in the - app.xml file, but when I run the Simulator name appears under the name