Portege M100 - Dvd drive IDE 1 error

Similar Questions

• IdeaPad Y560 dvd drive ide or sata?

  Is Y560 dvd drive ide or sata? I want to replace it with a hard drive so I need an IDE HDD is ide?

  _Aurora_ wrote:
  Thank you very much for the answer BUT, I took out the DVD player and its connection to the motherboard does not resemble regular connection of HDD at all.

  Hello

  All connectors/ports sata may not look the same but will serve as the data transfers. The Sata ports are different for different devices, for example the odd and HDD.

  You can see the attached picture in the spoilers below.

  Link to photo

  This a port hard drive

  Link to photo

  I hope you get now why the odd port and the port of hard drive are different.

  Concerning

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

• Satellite 1800-911: error #1 - C2502 CD/DVD drive IDE

  PC: satellite 1800-911 BIOS V.2.1.

  I try to fix the problem with my DVD/CD COMBO drive (all of a sudden do not read any kind of CD).
  I tried to update the firmware from 1313 to... I don't remember. I get now, before XP pro SP2 start, the "IDE #1 ERROR" message and the operating system do not recognize any DVD/CD.

  BIOS recognize, ligth blinks and you can use the eject button. When XP is from that of the ligth is disabled and the eject button do not work.

  Now, if I try to go back to firmware 1313 (from boot floppy BACK) I get an error TYPE ROM INCORRECT.
  Can I fix this?

  > BIOS recognizes, the light will blink and you can use the eject button
  That means nothing!

  If the IDE 1 error message # appears it means that the BIOS does not recognize the device (CD/DVD drive) that is connected to the IDE 1 controller.

  I think that you used just a bad firmware and flashed settings preinstalled with the wrong firmware!
  Now the master\slave\c-salt settings have been changed and the BIOS cannot access to ODD.

  I don t know where did you get the firmware, but in my opinion this firmware is certainly false and not supported!

  I found this drive here on the Toshiba page but the firmware is missing
  http://www.storage.Toshiba.EU/index.php?id=8&PID=99&SID=3

• Satellite 1800-712-CDRW/DVD Combo IDE #1 error

  SR-R2102 original stopped reading discs, bought a new SD-R2102 on Ebay but the laptop does not recognize the drive. Error IDE #1 shows the boot and the player does not display in the material in (the old watch of failed disk) Device Manager. The new disc has Compaq sticker on it. Read other posts on the forum, seems the disc is not compatible, even though it appears to be an identical replacement. Any way to get it to work? Hoping someone can help.

  Hello

  Each CD or DVD drive cannot work properly with each laptop model. This is the same model of car, but it has been used by another producer of laptop. Normally it should be adjusted to be slave. Perhaps is there some difference.

  In my opinion, you can try to update BIOS. If the error occurs again, that is not compatible drive and you can contact the Service partner and ask them for some advice.

• Portege M100 - need driver ethernet

  Hello!

  I need driver for my laptop ethernet. It's the Portege M100.
  I have download all the drivers from the drivers download, but still ethernet does not work.

  Thank you!!!

  What you mean with network does not work?
  Brands you yellow in Device Manager?
  Can connect you to a network?
  Please explain this more accurate.

  Did you download the driver here?
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  It would also be interesting what OS you have.

• Re: Cd/DVD drive problem - code error 39 on Satellite P series

  Hello

  It is my first request for assistance.
  My CD/DVD drive is most recognized, and when I go to Device Manager and click on CD/DVD I'm informed that the cdrom.sys file is there but cannot be loaded.

  An error number 39 is reported.
  Any advice would be greatly appreciated, but please keep things simple to the actions of a single line if possible.

  Of course, you can get a few tips ;)
  I think you might find faster if you are looking for first in the forum, but I'll try to help you too.

  He error code 39 is very common issue and can be resolved easily.
  See this MS knowledge base article:
  http://support.Microsoft.com/kb/314060/en-us

  So first of all remove the CD/DVD drive device manager.
  Then access the registry using the regedit command and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop and wait until the CD/DVD drive has been installed again.

  That s it. ;)

• my cd/dvd drive is corrupt error code 39. My computer is vista syatem. I can't download any software. Help, please

  Hello please help retorw my Cd / Dvd drive because it is corrupt and the error code is 39. Now, I can not download any software from a disc. What should I do?

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/driver-is-missing-or-corrupted-error-code-39-USB/6aeba33e-07fb-446e-9602-2fcc4b8103a9

  It will be useful.

• Missing CD/DVD drive, code 39 error

  Original title: My DVD recorder is in the bios at startup, but in the management system is a $Error39 driver damaged or missing conflicy $ how to fix

  My dvd cd burner is in my BIOS boot and in the management of my device that has a yellow flag with a code errow (39 driver damaged or absent also, it does not appear when I look in the readers, readers of storage C F G only no. CD DVD drive listed.)

  How canI install a new driver

  Hello

  I understand that you get an error code 39 and CD/DVD drive is missing from the computer. I understand the inconvenience.

  I suggest you perform the steps mentioned in the article.

   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• CD and dvd drive code 39 error in Windows XP

  I write on behalf of a client when the client uninstall Norton 360 V5 system loses sight of my dvd players and cd.  The drive letter is no longer seen and I can't read or write on the part of readers. The operating system of the operating system is
  XP, but it also happened when running windows mobile phone of the customer home premium 7.  The customer was able to solve the problem using the troubleshooter in windows 7, but could not find a similar convenience store on XP.  Can you help me?

  Hello

   
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
  Run the fix it tool for the article mentioned below and check if this can help fix the problem.
   
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

• My laptop does not recognize the cd/dvd drive, gives the error message 19 and cannot load/reload driver TSST. Any suggestions?

  Device Manager says: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19).»  Mr. Fix - it (Microsoft) indicates the CD/DVGW TSSTcorp TS-L632M ATA Device drivers & filters are corrupted or damaged.  Mr. Fix - it could not download the updates/drivers for TSST.  Mr. Fix - it has been able to get the computer to recognize, but unable to take the function of CD/DVD.

  Hello

  Perform the following methods and check if it helps.

   

  Method 1:

  Please run the difficulty of following article and check if that helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

   

  Method 2:

  You can read the following article to see what might cause this problem.

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052/en-us

  If you had recently upgraded the computer to the Vista operating system or install the Service Packs, then try the steps as described in the following article.

   

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/  

  Hope this information is useful.

• Won disc '; t eject the DVD drive. No error code

  I can't eject a disc I burned my DVD player. Dell XPS M1530 running windows vists. Disc plays but won't eject.

  You may have a hardware problem with your CD/DVD drive.
  Use the trick of trombone below to open it.

  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  http://www.ehow.com/how_2093458_remove-stuck-CD-from-CD.html

  http://www.insidemylaptop.com/remove-CD-DVD-disc-from-not-working-laptop/

  See you soon. Mick Murphy - Microsoft partner

• Portege M700 - DVD drive fails during the recording of discs

  Hello

  I tried the Disc Creator that came pre-installed and also Nero 9.2.6.0. All this on Vista 32 bit.

  The latter seems to have no idea about the problem, as it says smething like unknown failure.

  The creator of disc mentions error code 380381-26-BF040304.

  The problem occurs only at the beginning, I tried with three discs, so I don't think that the disks are the problem. In any case, they are DVD + R DL Verbatim and support up to 8 x, while the recorder goes only up to 4 x for the double layer, so I think I'm ok.

  My suspicion is that maybe the firmware in the DVD version needs update... He mentions Hw 1.00, 1.10 Fw. Other manufacturers of laptop as offer updated firmware DVD for her, but I couldn't find one of TOSHIBA.

  Any ideas?

  See you soon

  Hello

  There are several disks for Portege M700, they are compatible. Usually in the user manual, you can find a list of supported CD/DVD players they are pre-tested by Toshiba and work correctly.

  If you have any other questions about a new drive, ask the service provider authorized in your country. They can offer you a compatible player.

• The CD/DVD drive power calibration error - Satellite A100-646

  Hi all

  I have a problem with the DVD-RAM of my laptop. I can not burn cd/DVDs, show error message is "power calibration error".
  Can I fix it myself?
  I tried to change the blank media (CD/DVD), cleaned the optical lens. S.O. Vista Home Premium
  The unit of DVD - RAM, it is MAST * A DVD-RAM UJ-850 s ATA Device Ver = 1.10 firmware

  Tanks a lot
  Best regards

  Fabrizio

  > I can fix it myself?

  Do not think that you will be able to solve this problem, because according to the error message, lens driver cannot calibrate in the right position and that's why the drive can't burn any DVD or CD.

  This is a mechanical problem and to my knowledge, the drive must be replaced.
  For assistance, please contact the ASP in your country. They should replace the disc with the compatible and supported a.

  If the warranty is valid should be done for free.

  Good luck a cheers

• What CD/DVD drive is compatible with the Satellite A10 S103

  I use the laptop Toshiba Satellite A10 S103 and I am about to replace the CD/DVD-ROM drive of origin by a new who can also write CDs and DVDs.

  However, I got a notice, that after the installation of the new DVD to drive the "IDE #1 error" message may appear. According to my knowledge, this error can be avoided by replacing the old disk with a new one which requires the same Primary/Secondary Master/Slave/cable select settings like old.

  Can you recommend a drive of DVD - RW which could replace the old DVD - ROM drive and would work without any additional adjustment of HW?
  The new DVD - RW drive should be similar to know
  [http://www.sonynec-optiarc.de/en/exhibits/slim-line-drives/ad-7540a.html].

  However, I was not able to decide that if this device will be or does not work in my computer that I don't know the parameters of the original DVD.

  My original Toshiba DVD drive information as follows:
  ' 1. ' "model SD-C2612
  2 "ROM worm." 1315
  3 'serial No.' 394N002659
  ' 4. ' 302 ' version number.

  The computer is already out of warranty

  Thank you.

  > However, I got a notice, that after the installation of the new DVD drive "IDE #1 error" message may appear. According to my knowledge, this error can be avoided by replacing the old disk with a new one which requires the same Primary/Secondary Master/Slave/cable select settings like old.

  You are right. FDI #1 error is displayed because the BIOS doesn't recognize the new internal CD/DVD drive because of the wrong master/slave/c-salt settings.
  Usually, these settings are fixed and cannot be changed on the external sides with another position of the rider.
  The firmware controls the notebooks internal parameters ODD.
  The use of ratings taken in charge and compatible is so very important.

  Sorry, but I didn t find details of compatible CD/DVD players.
  Did you look in the user manual of your laptop series?

  In my manual, I found some info on my laptop-compatible players.
  So maybe you are a lucky man and your owner's manual will provide useful information.

• Satellite 2450-401: "IDE 1 ERROR" after installing the new NEC AD - 7543A thin disk

  I have a Toshiba 2450-401 and I buy a slim NEC AD - 7543A labelflash drive.
  When a reboot my Toshiba raise an error: "IDE 1 error".
  This is a message of incompatible equipment? There is a solution for this error?
  How can I solve this?

  Hello

  What to say dudea? ¦a? ... seems you have made a big mistake and purchased a bad CD/DVD drive.
  This error message is only displayed if the drive supports bad master\slave or c - salt settings!

  You should know that not all readers are compatible and can be used in the laptop!
  AFAIK the operating manual provides information on some readers supported!

  But if you na? t know this drive is compatible, try to contact the service provider allowed in your country and order the support one new!

  Good luck