Portege M200: No COM-port after connection Replicator 3 +.

Similar Questions

• Portege M800 - the system hangs after connecting to fingerprint

  I just got my Portege M800 weeks ago and frankly speaking, this model has been giving me a lot of trouble. Earlier, it's heat problem in the palm rest and there is no solution for it.

  Now I am facing another problem with the connection of fingerprints. I'm running on Windows XP. I put the system must be locked after 5 minutes of inactivity. So normally after 5 minutes of inactivity, the system will have to be me to scan my fingerprint to open the windows. But there are moments which, after analysis of my fingerprints and put in correspondence with success, the screen will be just white (only show the desktop wallpaper). Not the desktop icons, no taskbar windows and nothing. Press Ctrl + Alt + Delete to bring up nothing and no answer even not a button. I tried to put the system to Hibernate by press the power button once as no response.

  So I have to finally press and hold the power button to reset the laptop.

  No matter which can help or give any idea of what was going on? Thank you!

  Hello

  I believe that these issues are in the past fixed with the new version of the fingerprint reader. Have you tried to install the latest version or you already have?

• Matter of finding the resources function VISA after COM port disconnected

  I have an application in which I use two COM ports for communication, both only is active.

  Between testing a com port gets connected and disconnected dynamically. I am able to connect and disconnect without problem.

  Now after my com port dynamic disconnected, its not visible in device as Manager, but if I search all the com port available using VISA find resource once it disconnects, then dynamic port COM is also visible in the list.

  Name of the USB interface is USB Serial Port and the com port is dynamic which will be disconnected. VI attached

  Any suggestion please

  
  

• Unable to connect to the physical COM port

  In my region of lab, I use VMware ESXi 3.5 on an HP ML350 G6 server.

  The server has a physical COM port but when I try to add a serial port to a guest VM 'Physical serial Port on the host of the use' option is greyed and unavailable. Other options are available by I don't need them.

  Any other virtual machine uses the COM port.

  How can I enable the use of the COM port to connect a modem to my VM guest?

  Concerning

  Marius

  The device series host feature is not available on ESXi hosts.check Administrator's guide

  Lige, VCI, VCP3, VCP4, VSP, VTSP

  Please note, if your problem or your question has been resolved, please mark the thread as answered and award points.

• Get the error message about the COM port at startup

  Original title: COM port occupied at startup

  We get busy COM port when the system has been started and given are incoming on port.

  The COM port is connected to a PLC which retransmit if he didn't get a response.

  In this case our application cannot connect to the port.

  Is it possible that we can avoid this or is there a way to release a COM port?

  Thank you

  HR

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

• Pair several devices on the same COM Port that use the stack for windows by toshiba bluetooth?

  I have several instances of the same device...

  I wish that they all use the same COM Port when connecting to my Toughbook.
  The application that will receive data from these devices will only monitor a single COM Port assigned to.

  I have only one active connection both for couples... That's why Ifeel, this should be possible.

  Any help would be greatly appreciated

  Thank you

  Hello

  Please contact the Microsoft Community Forums. I understand you want to pair multiple devices on the same COM Port using Bluetooth.

  Unfortunately, it is impossible to pair multiple devices on the same COM Port using Bluetooth as it is by design.

  With the help of Windows-related issues feel free to post on the Forums of community of Microsoft, we will be happy to help you.

  Thank you.

• Portege M200: serial port does not work with port replicator

  Hello
  I have a Tablet m200 and the top mentioned dock/replication PA3314-1PRP port.
  As the M200 has no serial port (rs232), I want to use the one on the docking station, but it is not recognized as a device on my tablet.

  Thew network connections and usb ports all work fine and the lpt port is shown in Device Manager. I have restored the Tablet and it still does not recognize the serial port.
  How can I get this port recognized so that I can use it.

  Thank you very much
  Lee

  Hello Lee

  I just, I can confirm that when you use the Replicator port advanced III with Portege M200 several ports do not work. Problem is that Portege M200 does not support these interfaces.

  This is a technical limitation and the port of mouse PS/2 port keyboard PS/2, serial port, I.Link (Firewire) port and DVI port will not be supported when Portege M200 is anchored on the Advanced Port Replicator III. :(

• Portege M200: big screen via the port replicator

  I have a Portege M200 with APR III. I realized that the DVI Jack does not work with it, even if for some reason any, even though they are not supposed to all other ports don't. EACH of them!

  What I'm asking today is how the hell can I get the laptop out on the big screen through the APR? I tried everything, it has the chipset nVidia go 5200 FX (which is able to output DVI according to nVidia)

  I just got a Philips 20 "widescreen TFT and got tired of watching her in the stretched standard resolutions.

  One of my friends has also Tosh lappy, but it's a Tecra 9100, which will be released on the big screen without any questions whatever it is standard, it appears as an option in the Billboard settins. In addition, nVidia say that this chipset is capable of custom resolutions, but I can't find it in the updated anywhere driver.

  Can anyone help?

  Hello

  Well the Tecra9100 is not a Portege M200. Are completely different books.
  The M200 protected does not support these interfaces.
  This is a technical limitation, that the port of mouse PS/2 keyboard PS/2 port, serial port, I Link (Firewire) port and DVI port
  will be not supported on the Advanced Port Replicator III, if a protected M200 is moored.

  The following ports are supported and can be used:
  Line-in Jack, taken Line-out, USB port, port external monitor, parallel port, taken Modem, LAN jack, DC IN 15V, housing for security lock, locking the computer.
  In the documentation for the Advanced Port Replicator III is a 'fact sheet for III Advanced Port Replicator"sheet where this limitation is descripted.

• Portege A600-133 - Slim Port Replicator III does not entirely

  Hello...

  I just got a Slim Port Replicator III (model PA3681E-2PRP) and annexed a number of devices (a VGA monitor, a USB keyboard and a USB mouse), according to the user manual.

  The unit, however, does well with my laptop (a Portege A600-133). Specifically, the laptop battery does not, the devices are not recognized and docking led remains off. However, the laptop turns on and off of the port replicator power switch, and the ethernet port also works very well.

  Clues?

  Thank you!

  Dimitris

  Hello
  I also had problems with the Portege A600 and Slim Port Replikator, when I just connect, works all good! Maybe it's too you, when you try to connect to the port Slim R. you: with your hands the laptop with Slim Port R. extra press together in the Air about where the connector is, one when she makes "Clack" and then a right is connected!
  Sorry for my English

• Portege M200 - bought on Ebay and frustration comes

  Hello

  I m new here and I want to ask for a warm welcome. I purchased a M200 on Ebay and he received two days before. The M200 hasn t had a DVD player and I have no recovery CD or software for my Toshiba. I have a Toshiba external slimline PCMIA CD-ROM, but more of him later.

  I found a lot of information based on this topic, but really nothing has worked for me, that article why I ask my questions here. So far, I'll tell you what I tried...

  I bought VISTA Home Premium and want to install on my M200.

  On my M200 FreeDOS short.

  I tried:

  1. use my USB drive as a floppy using a HP tool that simulates a USB drive as a disc of floppy (FDD). I ve a copy all the contents of the Vista DVD for my USB. Then I ran the BIOS on the M200, select FDD as first boot option, but nothing happens, it still start FreeDOS.

  What I'm doing wrong, Boot USB (diskette) works on the M200?

  2. as there is an external Toshiba CD Player included in my M200, I thought the first installation of a Windows XP disk. In the first period the player seems to not work, but after some time, it worked and I put my Windows XP on it. He loaded the disc, and the typical blue screen for the start-up of the plant came. But after a few seconds he stopped and said "could not read the data xxxxxx.xx, error 7. I tried two more times and same error appeared, only that it was another file that could not be read, and another error number.

  I read and I don't know if it's true:

  I have red somewhere that I can only install Windows XP which was used on the recovery CD from Toshiba (that the CD was not included in my M200). So I can't use for OS install the recovery CD and any other normal XP CD?

  Or is there an error with my external CD drive? Currently, it doesn't work again...

  3.

  I have red the following link to install Vista on M200 by a PXE server:

  http://flimflan.com/blog/InstallingVistaOnYourToshibaM200.aspx

  and this one

  http://home.allegiance.TV/~joem298/

  The first link says I can go point 13 of the second link:

  Umbrella and that's what bothers me. They tell me. Turn on your Toshiba M200 and press F2 to select the network. I press F2, but nothing happens, I see the Toshiba logo but nothing happens... If I press on enter, then come back to FreeDOS...

  Also on the second link, I tried to start from the point 1. But in point 5, the word:

  Unzip the contents of "BFD package full v1.0.7.zip" in a temporary directory. Open a command prompt and navigate to the temporary folder. Run the command "bfd msnet" in order to create the startup disk.

  I don't have a floppy drive. They tell me to run bfd.msnet from the command. Cmd.exe command is? If Yes, what should I type in to get bfd.msnet run?
  ---------------

  I knew that installation would be very difficult and I kindly ask for personal assistance. If you can speak German, it would be nice to answer in German.

  Up to now
  Ahmed

  :/

  Hello

  As you can see in this thread, you can install Vista on the Portege m200 and it works fine:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=73510𑼦

  The point is you need a PCMCIA compatible CD/DVD drive to boot from the Vista DVD.

  This thread will show you how to install OS without using the external CD/DVD drive:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232

  It describes the procedure for Portege R100, but it should also works on an M200

  Good luck

• Re: How to connect to the mobile phone via the com port

  Hello
  I have problem with connecting my Nokia n82 (s60) phone to bt via COM port. I want to connect mobiola webcam and need it. Can U help please?

  Hello

  Satellite A300 Vista preinstalled
  Battery Bluetooth version 6.10.07
  Motorola Razor V3 mobile phone

  Not the same mobile phone, but the principle is the same.
  Without doing anything special, I connected my phone to the laptop in a minute.

  Allow BT using FN + F8
  Open Bluetooth settings, click the BT symbol in the taskbar
  Click on new connection
  Select the Express Mode > mode activate Visible on laptop > click OK
  On the new connection wizard, choose phone list and click OK
  When offered choose security PIN (for example, 1234)
  Check connection on mobile phone and enter PIN security
  After the PIN CPM40 control port will be enabled

  Then now is your phone connected to your laptop and you can, for example, transfer files from the phone to the laptop.

  By the way: what model of laptop do you have and which version of battery Bluetooth?

• My device used to be included in the device under the turbine BP & COM port section manager now it is hub USB root and I can't connect with my camera. Help

  I have a machine that uses a USB to serial connection, after I installed the driver in my computer, it finds the machine and load the device in the ports COM & LPT, but this morning for some reason, he shot my device in the USB root hub system. How to get out of there and recognized him as a COM & LPT device since it is a USB to Serial Port that I can discern the number COM port so that my computer can communicate properly?

  Hello
  
  1. What is the model and brand of the device?
  2. do you see any red or yellow bangs in Device Manager?
   
   
  a. in device, right-click on the Device Manager and select Properties.
  b. now in the Properties window, click on the tab General Post back the message found underdevice status.
  
  Open the Device Manager

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Which is connected to my Tecra A3 COM ports?

  I want to know if there is a way to know what devices use my port com 1, 2 and 4. I know that the com port 3 is used by the internal modem. What about the other 3? The reason is that when I connect a serial port adapter full USB port, it is immediately assigned com port 5.

  Hello

  Please check this page http://www.microsoft.com/downloads/details.aspx?familyid=69ba779b-bae9-4243-b9d6-63e62b4bcd2e&displaylang=en Microsoft. I hope that this little tool can help you.

  Good bye

• Access keys stopped working after update Win XP on Portege M200 and M400

  After having invited to do, I recently upgraded to Windows XP two my Portege m400 and m200 notebooks.
  Since then, I've noticed as hotkeys that i.e. Fn + F1 - F12 has stopped working.
  Outside the windows updates, I only use and change a lot on the m200 so I am sure this has to do with the Xp updates.

  Can someone help me restore the m200 and m400 hotkeys?

  Hello

  Try reinstalling the common module for Win XP edition filed.

  The common module for Poretege you can find on the European driver Toshiba page:
  Laptop-> Portege-> Portege M Series-> Portege M400

  The common module for Portege lies in
  * ARCHIVE *-> Portege-> Portege M series-> Portege M200

  Welcome them

• Portege M200 - where to find T & D Utility FD after replacement motherboad

  I just replaced the motherboard on a Portege M200.
  Installation guide States, you must run the FD T & D after replacing the motherboard and run the initial configuration option.

  Nobody knows what is and where can I find this utility?

  Its also equally useful for the definition of DMI information.

  Hello

  As far as I know these utilities are special tools that are not designed for public use. Only the Toshiba authorised service provider got such tools and utilities.
  Because of this, I put t see another option to contact the ASP in your country and ask for help.

  Greetings