Portege M200 Tablet Edition, IIS installation through Control Panel error

Similar Questions

• Need to restore disk for Portege M200 tablet pc

  Dear all,

  I need a copy of the disk original restoration for a Portege M200 Tablet pc.
  Just found out that Toshiba does not sell these disc more. (?!)
  Too old... I'm in trouble!

  Can someone help me please? Anyone got one?

  I tried ebay but without success for me.

  Thanks in advance.

  An owner of desparate M200 in Holland.

  Hello

  This is a really silly situation. I have no such media, but maybe you should contact the nearest authorized service provider. Maybe they have this CD.
  I put t have much experience with the tablet PC, but up to what you expect you should try installing WXP Professional and all offered drivers Toshiba, tools and utilities.

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Child can disable Windows Live Family Safety on notebook child through Control Panel

  Hello
  My 14-year-old bought her own laptop.  I installed Windows life family safety (WLFS).

  He informed me that he can turn it off via the control panel > user accounts and Family Safety > Parental control > provider Elite > [click on "None" or "WLFS"].

  Suggested family security forums I set up an adult user and make me an administrator and my son a Standard user.  I tried, but his computer become unusable because it was not able to perform the same tasks such as access to the files he needed for the programming, install/uninstall a software, or perform maintenance on the system.

  So, I removed the adult user and made my son admin. Now I have to go on trust.

  Q: what other solution is there?  Is there another software that I can install it on his computer which will follow his activity but does not appear as a 'provider' in the Parental Control Panel?

  It will not uninstall it, because then his computer should be removed.  I want to just keep him off for 2 minutes to check an adult site and then turn it on again - which is what he can do with the Windows parental control.

  Why don't block you websites of the wireless router... theres some kind of startup Web page configured for the netgear an others as well...

• Impossible to access A add or remove in the control panel error ""C;\WINOWS\system32\rundll.exe"

  original title: cannot access Add or remove in the control panel

  Access cannot add or remove in the control panel.  When I try this i get could not find "C;\WINOWS\system32\rundll.exe".

  Hello

  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.

  Method 1: Follow the steps mentioned in the article below

  Cannot find the Rundll32.exe file when you open Control Panel

  http://support.Microsoft.com/kb/812340

  If the problem persists,

  Method 2:

  The issue could also come from Virus/Malware, download and run Microsoft Safety Scanner and check if this is useful.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• cant open Control Panel/error/RPC server is unavailable

  When I try to open the system restore, I get this error code... Class not registered (0 x 80040154)

  If I try to open the control panel I can not and I get... The RPC server is unavailable

  What can I please?

  Hello

  System restore depends on the RPC Server service that could be the reason why you can not run the system restore.

  The Remote Procedure Call (RPC) Services service must be started and startup type must be set to automatic.

  (a) click Start, type services in the start search box and press enter.

  (b) in the Services window, find a remote procedure call and do a right click on it to select Properties.

  (c) under the general tab, make sure the Startup type is Automatic and the Service status is Started.

• Control Panel error windows explore stopped working.

  When I click on start, then Control Panel button, a control panel with whitened with lime but visible content window with the following error dialog box: "Windows Explorer has stopped working" and some more text indicating that I close the program.

  I know there are a lot of other people who have this problem but I have not found the solution.  Please let me know what that is or point me to it.

  I have Windows 7 Home Premium.7600, clean install, 64 - bit

  Thank you!

  When I click on start, then Control Panel button, a control panel with whitened with lime but visible content window with the following error dialog box: "Windows Explorer has stopped working" and some more text indicating that I close the program.

  Hello

  Windows Explorer crashes is mainly caused by an incompatible Shell Extension.

  You can download this reg from my SkyDrive file:

  http://CID-128fc518635be2dc.SkyDrive.live.com/self.aspx/.public/Ms%20Foren/registry/WER%5E_Explorer.reg

  and double click on the file to import. If you are unable to do this, run regedit.exe and import the registry file here!

  When the Windows Explorer crashes, Windows Error Reporting Service [1] creates a dmp under C:\Localdumps. Please download the file to your public Skydrive folder [2] and post the link here. I take a look at the discharge with the debugger, maybe that I can see what Shell extension is the cause.

  André

  [1] http://msdn.microsoft.com/en-us/library/bb787181%28VS.85%29.aspx
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65 [2]
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Portege M200 tablet - screen brightness controls F6/F7 does not

  We bought one of these machines, but had to install our own special Tablet build PC in order to comply with the specifications of safety of our society. Now the F6 and F7 brightness controls do not work.

  Can someone tell me what Toshiba Utilities, I need to download and install to get this working.

  Thank you

  Laurie

  Hello Laurence

  From my experience, you need the Hotkey Utility for display devices. The new version is v2.6.0.000. You can find this tool on the Toshiba site.
  Please take a look at this site:

  http://EU.computers.Toshiba-Europe.com

  Please check this and that you post the result

  Good bye

• my scrolling on the touchpad of my laptop does not work, I tried to fix it on the mouse settings through Control Panel, but nothing works... Help?

  I really need help cause I really need my roll to rework. His frustration.

  Please think to install the latest drivers for mouse/input of the website of the manufacturer of your laptop.

• How can I find/get drives of Installation of Windows XP Tablet PC Edition for Toshiba Portege M200? Toshiba has none.

  Hello

  Can someone please tell me where and how can I find/get a set installation discs for "Windows XP Tablet PC Edition" for a laptop Toshiba Portege M200/tablet?  Repair laptop customers, but I'm in need the installation discs for tablet PC and touch screen features may work correctly.  I, ve contacted Toshiba and they do not have any OEM system to sell records of restoration, so am now need to find a legal set.  I bought a set of disks that were supposed to be the Toshiba Windows XP table PC Edition, but they were false records.  In any case, if someone could help me I sure would appreciate it.

  disaksen

  Hello, Disaksen,

  If the manufacturer does not, while Microsoft can't as well.

  to obtain a replacement disc, Microsoft's orders to the (800) 360-7561 service, phone and ask that your damaged disk. If you are outside the United States, contact the Microsoft subsidiary for your area. To locate your subsidiary, visit the following Web Microsoft World Wide Offices Web site:

  http://www.Microsoft.com/worldwide/
   
  How to get the installation discs for Windows XP for installation of boot floppies - download link included
  http://support.Microsoft.com/kb/310994
  Who should download the installation diskettes? You must download the installation diskettes if all the following conditions are met:
  • You install a new version, full of the retail Windows XP.

    Note An upgrade to Windows XP installation does not require the installation diskettes.

  • You have a working CD drive, but you cannot start your computer from your CD-ROM.
  • You can start your computer with a floppy drive.

• Portege M200 - device unknown in Device Manager

  I did a clean install of Windows XP on my toshiba portege m200 (Tablet). I have most of the devices drivers installed, but there is one that I can't understand. The device manager says I have an "unknown device" on my "Intel 82801 dbm lpc interface controller.

  What is it? I thought it was the chip set, but I had installed the Intel chipset drivers (twice, just to make sure that I really did), but it still reads as 'unknown device' on ' Intel (r) 82801DBM LPC Interface Controller - 24CC.

  To resolve this issue go to the device, right click on the unknown device, Manager and then select set to update driver.
  When the Hardware Update Wizard appears, select the advanced option.
  From the next window, select the 'don't search. I will choose the driver' option
  Now, go to the Intel announcement and select good "82801DBM LPC Interface Controller - 24CC.
  Click OK and now it should work.

  Also, be sure you have all the drivers installed from Toshiba Web site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Portege M200 PPM21E: shock electric metal

  Hello

  I recently got a toshiba portege m200 tablet but I realized that when the AC adapter is plugged in a small electric shock is given to any person touching the metal housing, I heard someone it could be my ac adapter that is causing the problem, but I wonder if someone on this site has an idea of the problem. Thank you

  more information if necessary:
  Tablet of model number: PPM21E-0260Z-FR
  The charger product number: PA3282U-1ACA

  Hello Thomas

  It seems to be some serious electrical ptoblem and please take it seriously. I recommend you contact the authorized Service partner as soon as possible. They must check the DC-in port and see if something needs to be exchanged.

  Please be careful about this. Maybe you should not use the laptop until this issue is clarified.

  Good bye

• Portege M200: Pen stops writing to the screen

  I have problem with pen.
  Feather do not write on the screen.
  Help, please

  Could you give more details?
  Have you changed something? What screen mode do you use?

  Have you checked the pen settings in Tablet and pen settings in Control Panel?
  The parameters are placed in the last tab called Pen Options

  Check it out.

• I can't restore the default scale (96 DPI) after editing it in custom scale (144 DPI) via Control Panel

  On my LG, running OS Vista business notebook, I tried a larger screen, through control panel\personalization, font then decided I preferred the default size after all, but after changing the size of return, by clicking OK and then by restarting the machine, the machine always starts with the largest font size I tried.  It may or may not have a report any with how I disabled the touch-pad through the windows Mobility Center, and now I can't get back no more.  The touch-pad is a LG customization, so may not be something to do with windows, but the screen font size seems to be a bug in windows.

  Hello

  Try adjusting the resolution first. Control the display of the Panel/customize/settings, move the slider to the left.

  As for the touchpad, you may need to reactivate by Device Manager before that he'll be back.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Windows Search / Immersive Control Panel / AppData Error Message

  I have a new laptop HP Envy delivered pre-installed with Windows 8.1 on a hard drive traditional.

  Immediately on starting it the first time, I connected a SSD to the laptop via a USB cable and used imaging software to drive provided by Samsung to the HARD whole to the new/empty SSD disk image.

  Returned & replaced the HDD SSD w / in 1 Bay drive, followed by placing the original HARD drive (but now secondary) in the 2 Bay drive.

  I wanted to re - map the 'My Documents' folder on the SSD to store files in this folder on the secondary HARD drive, so I remapped this ("c:\users\Brad\Documents") folder to point to 'f:\users\Brad\Documents' instead.

  "So move on, for some reason, when I go to the desktop search item and try, for example, to search for"Remove Apps", which translates by he find something like"Uninstalling apps to save hard drive space"or something like that, and I click on uninstall apps to save hard disk space", I get a message similar to the following :

  [Window title]
  C:\Users\Administrator\AppData\Local\Packages\windows.immersivecontrolpanelcw5n1h2txyewy\LocalState\Indexed\Settings\en-US\Classic{4026492f-2f69-46b8-b9bf-5654fc07e423}.settingcontent-ms
  [Content]
  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  I'm not sitting on my laptop right now, but I found the info. top online and there are very close to the error msg. I get, except that instead of "c:\Users\bmccollum\AppData\...". ", the title of the GMS. I get begins with "f:\Users\bmccollum\AppData\...". ». I don't remember remapping anywhere at all outside the location of 'My Documents', then why is this research activity trying to seek the "AppData" folder on my hard drive secondary now?

  This same error msg occurs when I am looking for another couple of points, but above all what I find and click work.

  For two items that I seek and I click on the element are, and I get this error message, if I go to the elements of the "long way" but just clicking 'Control Panel' or anything else and keep them on the street from there, items open fine, it's just when I try to click on a few items after that I looked for something they are not w / the same error msg from above.

  I searched around online and have tried the trick of "rebuild indexes" and this seems to fix errors related to research for just a little, then a few minutes later I can look for the same thing that was previously the 'Immersive Control Panel' error and bam, it is back again with this similar to one already mentioned msg.

  Something seems to be pointing to "AppData" being on my drive 'f' (secondary) when I don't think I moved anything but my "my documents" of primary transmission 'c' to secondary drive "f".

  I'm quite lost. Any other ideas on what may be the cause/solution for this?

  Thanks in advance.

  Hey @zildjian ,

  Welcome to the HP Forums!

  I understand that you are having problems with the paths to files on your Envy laptop.

  The most important thing here is that looks like you have cloned the drive, but not the format of the original HARD disk. This will cause a plethora of problems because you now have 2 boot managers and repositories of operating system file. Windows will have a fit over this.

  I suggest copy important information from the HARD drive to an external drive or for SSD and formatting the drive. This will wipe the Windows installation and free up additional space. From there, you can create a Documents folder and map the folder accordingly.

  You remap F:\Users\Brad\Documents by adding it to the document library or did you use the move feature tab in the properties of the Documents folder location?

  Please try the original function of HARD drive and test development shaped.