Control Panel error windows explore stopped working.

Similar Questions

• Windows Explorer stops working whenever I have connect a USB flash drive and try to access

  Hello. I use Windows Vista.

  I had a particular problem. Whenever I have plug in a USB key and try and access it, I get a pop saying "Windows Explorer has stopped working." the file is closed. If I wait a long time (i.e. 10 seconds), I might be able to get into the drive without any problems, but even when there is no guarantee. The problem persists in each USB slot I use. In addition, it is not that the computer is not able to detect it. It can detect and identify that it is a USB flash drive. It's just that whenever I try to access (or the folders inside the flash player), windows Explorer stops working and restarts.

  Does anyone have this problem before? And any help is appreciated. Thank you.

  The mistake made reference the MSVCR80.dll, which is a Microsoft file, but it may be another third party file, causing the problem.

  DivX is installed?

  If so, can you uninstall DivX and see if the error resolves.

• Windows Explorer stops working on start up

  Windows Explorer stops working at startup is also other programs stop working

  Hi taz62,

  Follow the instructions in the link below that may help you resolve the issue.

  Error message when you log on to Windows Vista: "Windows Explorer has stopped working".
  http://support.Microsoft.com/kb/937093

  Check whether the problem is resolved.

  If the problem persists, please follow the instructions below to start your computer in clean boot mode.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  You can check the event viewer for error codes.
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• My windows Explorer stops working when I try to use the file menu on a file.

  My windows Explorer stops working when I try to use the file menu on a file. If a file is selected in a folder that windows Explorer will be display Windows Explorer has stopped working the message box. This occurs only if a file is already selected and you click on the file option in the menu bar. All the other menu items work well if a file is selected or not, and if no file is selected the menu file works fine. I already ran SFC/scannow from the command prompt, but it returns no violation.

  Hello

  Thanks for posting your question in the Microsoft community forum!

  I understand that you are having problems with Windows Explorer. I'll help you solve the problem. To be able to understand the question in a better way, I would like to ask you a few questions.

  (1) did you make any changes before the show?

  (2) how often does the problem occur?

  Method 1:

  Step 1: You can check if the same problem occurs in safe mode.

  Please follow the link on how to start the computer in SafeMode below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Perform a clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  See also:

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Note: Choose a date before that the problem occurred as your restore point while performing a system restore.

  WARNING: Perform a restore of the system can change your settings and delete your unsaved data. Do it at your own discretion.

  Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.

• Windows Explorer stops working when USB drive is ejected

  Hi all

  I'm having a problem with the windows Explorer. When you eject a USB device, windows Explorer stops working and must restart. It also stops working when trying to get the properties of the USB device. I watched "Event Viewer" and there is an error log that says this:

  The failing application name: Explorer.EXE, version: 6.1.7601.17567, time stamp: 0x4d672ee4
  Name of the failed module: SHLWAPI.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c9ab
  Exception code: 0xc0000005
  Offset: 0x000000000000ae81
  ID of the process failed: 0xa3c
  Start time of application vulnerabilities: 0x01cd974c8a303440
  The failing application path: C:\Windows\Explorer.EXE
  Path of the failing module: C:\Windows\system32\SHLWAPI.dll
  Report ID: 0d06c054-0346-11e2-ad84-00248c7a3b78

  Now, I had this problem on my home computer and tried to replace the file SHLWAPI.dll with whom I had the internet, but it bugged my computer and had to re - install windows. Now, this computer works fine. I would get a solution to what keeps all my files and programs since to reinstall all my programs and backup my files on my computer to school will be a big hassle.

  Thank you
  Riley S

  Hello

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Also visit the web site of the manufacturer of the computer support and search for Windows 7 drivers for your specific model number. If you have Windows 7 drivers then download to a folder on your hard drive and install them all, starting with the drivers card mother/chipset, SATA, USB, Audio, LAN, etc.

• Equium A210 - Windows Explorer stops working

  I have a laptop Equium A210. Why does windows Explorer stop working and restart all the time?

  > Why windows Explorer does not work and restart all the time
  Who knows?  :|

  Maybe you have messed your OS and now OS doesn't function properly.
  Have you tried to restore the operating system from the recovery CD?

  If this isn't the case, then do it. The whole HARD drive will be formatted and the recovery CD to install the image of Toshiba which contains the OS, driver, utility and software tools extra.

  This should help.

• Windows Explorer stopped working/Windows restarts.

  Windows Explorer stopped working/Windows restarts. I tried the recommended fix, that is 'Sfc/scannow' and "no problem of integrity" this seems to be a problem of user a lot and it's a pain in the neck. MS certainly needs a fix.

  Hello

  Please start a new thread in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  We can certainly help you solve the problem.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I just download aa3 game without problem, uninitialized probs, but as soon as I start the game a window appears saying "error, windows has stopped working", what is wrong?

  I just download aa3 game without problem, uninitialized probs, but as soon as I start the game a window appears saying "error, windows has stopped working", what is happening, please help.

  Hello
   
  Follow the suggestions and see if it helps.
  Method 1
  You can check if the problem exists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 2
  If the problem persists, you can uninstall and reinstall the game.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can provide the event logs in Event Viewer.

  You can provide the exact error in the Event Viewer logs to find out what caused the problem.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  You can also see the article for more information.
  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems

• Windows Explorer stopped working/restart, it continues to appear randomly.

  I have a new computer with Windows 7 and I'm starting to wish I had kept the old one. I get the message Windows explore stopped working folled by the one who says it will restart. There is no reason for it but I can't see at the end of a chapter of an assignment without him doing this and close all programs. Can it be fixed or is at - it something wrong with my computer?

  I would appreciate all the help I'm losing patience with her.

  Thank you

  Laura

  The steps that I want to tell you is not worth with vista

  Try to use the System File Checker to scan your operating system for missing/corrupt files, perform the following steps:
  1. start and type cmd in the box start the search.
  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.
  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista CD.

  Hope this helps you. Let us know anyway. Make it a great day!

• my window explore stop work af by clicking on a mkv.file how to remove on my download folder?

  my window explore stop work and restart my laptop after clicking on a mkv.file how to remove on my download folder? I use a window 7.

  If your browser crashes as soon as you click the mkv file.

  You can delete this file mkv via the command prompt.

  (1) open the command prompt. (Click the Startbutton .) In the search box, type command, and then prompt in the list of results, double-click command prompt. )

  2) navigate to the download folder where the mkv file is present, using the "cd" command.

  For example, if your file is present in the "C:\Users\user1\Downloads".

  Type cd C:\Users\user1\Downloads and press enter in the command prompt.

  (3) Delete (Remove) the file name using the "del" command.

  For example, if your mkv file name is "Sample.mkv.

  Led Sample.mkv type and press enter in the command prompt.

• Windows Explorer stops working at random times while browsing files.

  Windows Explorer stops working at random times while browsing files. I tried to fix this by doing a start-up in minimal mode, but without any result.
  It all started with a similar problem, Explorer windows stops working at first upward and restarts and stops working again and restarts again and keeps it doing. I've tried several things like do a clean boot, by safe mode, but even there it happened the same thing but this time, stop once and restart it once, and then it worked normally. When I started windows normally, it did the same thing, so I tried and inplace upgrade and did not work, so finally I did a cover, but only on the first partition, which is the operating system, now I have this problem, Explorer stops working at random times while browsing the folders, it restarts, but then the same thing happens.
  Please help me I am running Windows 7 Home Premium 64-bit and sorry for my bad English.

  Hello
  I tried your methods, but still did not work. In the meantime, I did a full restore to two partitions, and it worked. I guess the problem was I uninstalled a few unwanted games, which came with the pc and the anti-virus of the trial.

• Control Panel System Windows Explorer has stopped working

  When I press on the Control Panel, system, I get an error "Windows Explorer has stopped working" and then control panel stops. I get this error every time I have to perform this action. When I run my PC on Safe Mode, it works fine and I get no error and I'm able to run the options that appear when the 'Systems' option is selected. Other tasks in the control panel seem to work correctly.  I also noticed that I get similar messages "windows Explorer or the program has stopped working" periodically when I perform other tasks in internet explore, etc.

  I tried all the recommendations described in of KB/269949 and KB/929135 knowledge articles and many items in the Microsoft community, Microsoft and the Internet site. For example, update the video driver, auditor of file system (CFS), Virus scan, Mode safe, clean boot, memory RAM test, etc.. I also tried all the relevant actions I could think under the Microsoft Fix tool. Each of them has not solved the problem.

  I have a laptop Acer Aspire 5742 G with ATI Mobility Radeon HD 5470 with 8 GB of memory, running Windows 7 with all the latest updates installed, so all drivers have been updated. I also use the last IE 11 with all updates.

  If anyone knows a similar problem with Windows 7, Windows Explorer and Internet Explorer 11, or has a recommendation how to fix?

  Hi Ravi,

  This is an update to my problem. It might be useful to others with similar problems.

  My problem has not been resolved, but I decided to live with it. It was a difficult decision after a major disaster, I almost lost everything on my PC to try and solve the problem.

  I put the finger on the problem with the graphics ATI Mobility Radeon HD 5470 version 8.741.1.5000 dated dated 25/08/2010 driver. I noticed that when I check for an update using Control Panel, Device Manager, select the graphics card above and updates, windows comes back with a message indicating that it is the best available driver.

  I made the mistake to check the AMD website to see if there is a newer driver. According to their instructions and download their program, they recommended a more recent drive using the catalyst for AMD. The new driver is Version 14.301.1001.0 dated 15/09/2014 date. The same driver is also selected if I the Slimdrivers application user. With this new driver, the problem disappeared. In other words, I was able to use the Control Panel, System menu and access the submenus system without any problems. I thought I had solved the problem. I repeated the process and checked for the driver from the Windows Control Panel, Device Manager and look for the updates. Surprise. This review of windows update back to the original version of the 25/08/2010. The problem is back again. I repeated this process with re-installing Catalyst from AMD with the same results.

  However, I noticed that the AMD Catalyst, never finished the installation and the installation crashed. Updated the driver before it crashed.

  My major problem occurred when I tried to restart the PC with the new driver installed by AMD Catalyst. My PC and Windows would not start. He gave me a number of errors that the problem cannot be corrected. I tried all the solutions, Safe Mode, point to restore, System Restore and all the choices given in the articles from Microsoft. None of them worked.

  Finally, after many hours, days and nights that I was able to use an Acer recovery disk, I created when I bought the laptop. One on the Image worked system recovery options and I could get my PC to a more ancient date. The driver is the original edition of 2010 the year with the same problem.

  Therefore, I decided to live with the problem. I can access the submenus of system using startup and entering in the auxiliary system option in the search box. I wrote these submenus.

  WARNING TO OTHER USERS. DO NOT TRY to UPDATE THE ATI Mobility Radeon HD 5470, 8.741.1.5000 driver version dated 25/08/2010, using catalyst of MCDA.

  Furthermore, my assessment is that if I try to restore my PC to the factory default condition, once all windows updates are installed and I install my apps, the same problem will occur. If I did think I would lose a lot of useful applications, which I'm not sure that I can restore. I have a lot of useful data that I use for more than 20 years and I can't afford to lose their jobs. I would live with the problem until something more grand occurs. In this case, I would by a new laptop. I would make sure that there no AMD ATI products on this topic.

  Thanks again for the time. There is no reason to answer, unless as described above, you have seen something new.

• Windows Explorer stops working when I try to access a drive mapped on my FTP server on the internet.

  I just changed web pages (using Crimson editor) and instead to save the files on my hard drive I just left open and "hibernating" my machine overnight.  After 3 days of having an FTP connection (opened by a mapped drive) setting on my computer hibernation, I accidentally hit Shut Down, and I lost all my work, ARGH! (Yes, I know, I should have better). In any case, now when I open my computer and click on the FTP of the mapped drives, I get the message that Windows Explorer has stopped working.  And if I go to Internet explorer (7), enter ' ftp://mysite.com it brings me to a root FTP page where it says: to view this FTP site in Windows Explorer, click Page, and then click Open the FTP Site in Windows Explorer. " I do that and it brings up a window of the Explorer windows momentarily and then I get the message. Explorer Windows has stopped working.  Any ideas? I hope I don't have to reinstall the operating system.  I did a system restore to 4 days ago. It did not work.

  Hi SewNSew,

  To refine the question, I suggest you try the following steps:

  Step 1: Set the clean boot computer and try to access the drive

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software

  Important: n ' forget not the computer to start normal follow step 7 in the link

  Step 2: The utility of Auditor (SFC) for the file system allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  You can still run a SFC scan on the windows vista computer. To run a scan suite SFC as follows:

  (a) click Start and in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  (b) at the command prompt type sfc/scannow , and then press ENTER.

  If the problem persists,

  Step 3: Disable control (UAC) user account and make sure to do this, follow these steps:

  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on Turn User Account Control on or off.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Select the use User Account Control (UAC) to help protect your computer, clear the check box to disable UAC, and then click OK.

  Important: It is not recommended to disable UAC; We just try to limit the question. Please, enable UAC after the test is performed. See the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  See the link below for more information

  Error message when you log on to Windows Vista: "Windows Explorer has stopped working".

  http://support.Microsoft.com/kb/937093

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Explorer stops working, then restarts

  Windows Explorer, not Internet Explorer stops working, then restarts whenever a windows in the start menu program is closed. In some programs in the start menu, such as Documents, pictures, music, games, computer, control, devices and printers, ect. The error message indicates that windows Explorer has stopped working and controls a solution. Then after about 10 seconds, all the desktop icons disappear, and then looks like windows Explorer restarts itself. I am running windows 7 since an upgrade of Vista. I reinstalled windows 7 upgrade kit and done all the recommended solutions to various web pages, but the problem persists. I talked to tech support and they say that, perhaps, some of the registry files are corrupted. The problem does not occur when I start the computer in safe mode. I have updated all drivers and updates of the window. I don't have a disk of Vista orginal software. Can I fix this on my own?

  Hi Michaeldaz,

  As the problem does not persist in safe mode, I suggest that you perform the clean boot procedure to check whether a third-party program installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Explorer stops working when I search my drive hard Western digital ext.

  I already looked at some of the patches but Thatcher do not correct it.  I was working very well before microsoft - so what did you fact?

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Note 1 : when you perform the clean boot, then follow step 7 to reset the computer to start as usual after the boot process.

  Note 2: Make a backup of all your data on an external drive before you perform an upgrade in-place, as this could result in loss of data.

  Hope this information helps.