Portege M200 with Windows 7

Similar Questions

• Portege M200 with external DVD drive

  I have a M200 with external drive DVD COMBO Slimline PX1055E-1NST.
  I've upgraded to VISTA and it will reinstall the devicedriver. Where can I find a driver that works with VISTA?

  Hello

  Your player is connected to the PCMCIA slot. Am I wrong?
  Unfortunately, at the moment that these drivers don't exist! :(
  I didn t find on the page of the Toshiba driver.

  Try searching for any 3rd-party PCMCIA drivers for Vista. Maybe you're lucky.

• The driver install Portege 4000 with Windows 2000 Pro

  Hi all.

  I'm having a small problem with a reinstall of windows 2000 on my portege p4000. Everything seems to work fine except for the wireless. All drivers are in and there is nothing in Device Manager is listed as unmanned, the wireless client shows the connection to my router, but ipconfig shows that there is no link at all.

  If I installed drivers and utilities in the wrong order? I would use my recovery CD, but they are damaged.

  Is anyone know the correct order to install drivers or where I can get this information?

  Thank you very much

  Rob.

  Hello

  The order of the Portege 4000 W2000 facilities:

  -Windows 2000
  -Chipset utility
  -Display driver
  -Audio driver
  -Toshiba Software Modem
  -SMSC IrCC NDIS Miniport V5.1.2500.0 device driver
  -Logitech Mouseware
  -Toshiba Common modules
  -Toshiba Power Saver
  -Toshiba Utilities
  -Toshiba Mobile Extension
  -Toshiba Console
  -Toshiba controls
  -Toshiba Hotkey Utility for display devices
  -Toshiba SD Card Driver
  -Toshiba internal LAN Driver
  -Driver LAN wireless
  -Toshiba Client Manager
  -Switch Device network
  -Toshiba Wireless Hotkey
  -Bluetooth Stack for Windows by Toshiba
  -Windows Media Player 7

  I hope this helps.

  Good bye

• No sound on Portege 3490CT with Windows XP Home edition

  Hello

  I bought a Portege 3490CT on eBay. Everything works fine except there is no sound available. I use WinXP SP2. I know there is a problem with the service packs, but the same problem exists after installation of Windows XP without service pack: it seems to be, that there is no audio devices available. The Windows Device Manager indicates only something a device "legacy". I think that it does not find the real device of Yamaha.

  Install the new driver of Toshiba homepage gives only a "driver not installed" error message.
  In the BIOS there is no option to disable the sound equipment.
  It is perhaps damaged?

  I hope someone has an idea...

  Thank you and best regards
  Mirko

  Usually the legacy term device is used to refer to any device that is not Plug and Play compatible.
  I can only suggest why it doesn't and I think it s a driver problem.
  The sound card that is installed on this laptop is compatible with Sound Blaster Pro and Windows Sound System.
  The computer uses a YMF744B. The YMF744B integrates master audio bus PCI, 64 optical interface of synthesis wavetable, AC-2 interface and control AC97 CODEC.
  In case you would recommend for Yamaha YMF752 or the driver that supports the chip YMF752 you are looking for the most recent driver.

  Check this box:
  http://www.softwarepatch.com/utilities/Yamaha-acxg-driver.html

• Portege M750 with Windows 7 - Screen Rotation button not working not properly

  I installed new Windows 7 on a Portégé M750 and everything seems fine except the buttons on the screen to manage the features of the tablet. The only thing I really want to work is the orientation of the screen one. I looked for drivers, but can't find anything in order to control the tablet buttons. I read that for the M700 you need to download the driver for the Tablet because it contains the drivers for the buttons, but there is no driver for the M750.

  All devices are ok in Device Manager with no need of drivers.

  Any thoughts/ideas/suggestions are welcome.

  Hello

  The Toshiba Euroepan driver page offers two different packages with added value.
  It is version 1.2.40 and the other is the 1.2.28_64 version - 2
  Check both!

  Also, I searched published for other series of protected M780 and pilots found Package of Extension Tablet Win 7 32 bits and added value Package v 1.2.34

  Maybe you should try the two series M750 software

• Portege R700 with Windows 7 64-bit: Windows Explorer fails to update

  It happens regularly after using my laptop for a while (1 hour more?) that Windows Explorer is no longer refreshes one of its windows. EG., delete a file and it is always displayed and disappears only after pressing the refresh (F5) button.

  Anyone who has had this experience, knows the problem, may suggest a solution (with the exception of maintenance by pressing F5 and possibly restart in frustration, which helps during some time)?

  It's very strange. I tested it on my Win7 64 bit-Satellite P500. I ve open two windows explore with in the same place, so I got the same content in both entities. When I delete a file or folder in the left window the right showed immediately that certain document has disappeared.

  I m really surprised that describes the problem may occur.
  Are you using the original OS that you got with your laptop?

• Portege M200 with external monitor - what is the best resolution?

  As a result of a recent post on using an external monitor with the M400, I have a question on the use of one with the M200. I realize that the M200 uses the graphics card Nvidia rather than the graphics card Intel in the M400 - is it better with regard to the use of an external display is concerned? The M200 manual says that it will support up to 1600 x 1536 resolution on an external display. I want to use my M200 in a docking station with an external monitor to the extended desktop.

  What would be the best resolution to go with externally? Should I go for 1400 x 1050 screen LCD M200 match? Or could I go for a 1600 x 1200, that should the graphics card (!) be able to cope? Or, finally, if I went to a widescreen 1680 x 1050, how would the face Nvidia card? The screen is not as clear as with the 1600 x 1050 screen?

  What are the chances of work at all? I see in the M400 manual which she is supposed to support 2048 x 1536 on an external monitor, but this seems to be a problem, judging from the other post.

  Any help appreciated - thanks

  Hello

  Well, the resolution of the screen depends primarily on the graphics card.
  If you want to use a display resolution that the graphics card must support. In addition, the graphics card driver is important. If the graphics card will support the resolution of the screen, BUT the resolution is not listed in the graphics driver, so you will not be able to choose this value.

  To my knowledge, if you use the docking station you will get Supportepar as the notebook display resolutions.
  The resolution of the external display also depends on the external display. If the material of the monitor will not support the resolution so you will not be able to get all the images on the external monitor.

  I think the best way is to test that the resolution is the best. Some people prefer the high resolution of small icons and other blind ;) like low resolutions (1024 x 768) because of the large icons

• Is it safe to use Portege Z830 with Windows 8 Pro?

  I have upgraded to Windows 8 pro on my Z830 - 10 M a few days after the release of win8.

  Today, I closed windows8 (all LED's off), closed the computer and put it in a computer bag.
  50 minutes later, when I took out the z830 it was burning hot.

  So hot that I couldn't hold it in my hands without protection.

  After cooling the computer, the battery was at 0%.
  It was 80% when I shut down the computer.
  (I use using the Toshiba, only loading the battery to 80%).

  Do I have to go back to win7 or just hope that my z80 won't burnout the next time it happens?

  > Today I closed windows8 (all LED's off), closed the computer and put it in a computer bag.
  > 50 minutes later, when I took out the z830 it was burning hot.

  I think the laptop is not stopped correctly.
  The fact that the battery was empty confirm me my hypothesis

  So always make sure that this laptop has been disabled properly before you put it in the back.

• Portege M200 - weird display with docking station problem

  Hello

  I use a Portege M200 with MS Windows Vista and the Toshiba docking station. Whenever I connected the system closed down it will start with low light and different screen resolution. The brightness can then be adjusted in Vista.

  To solve the problem, I have to disconnect it, then put it in PC Mode and finally stop Vista. With the next offline boot, it works correctly and can be re-docked. Maybe it's just a lack of understanding of the system? It seems that with a rooted boot, nVidia somehow takes place or is there different profiles?

  Thank you!

  Alexander

  Hello

  At first, I must say that Portege M200 is old enough laptop model and I really wonder that Toshiba supports this model of laptop for Windows Vista. You are really lucky in this regard.

  In any case very important is info which edition of WXP Tablet Toshiba offered tools for/disconnect. If I remember well, it was utilitarian Toshiba Mobile Extension. Using this tool you has been able to use different settings for Bay service as well as for output screen to choose the correct resolution.

  Under Vista it is controlled by Vista and, AFAIK, Toshiba does not have any special utility for this. You must also understand that procedure/disconnect (power switching power supply) is controlled by Vista and I can imagine that under Vista it does not work perfectly.

  My opinion is that there is not much to do, but I hope I'm wrong on this issue. Let's see what else users of forum about this.

• Portege M200 - pen does not work with the screen

  So I bought a pen for M200 and reinstalled the operating system.
  Now I M200 with Windows XP Tablet PC edition, a utility Screen Rotation and usefulness of the stylus button. Now Pen buttons work fine with my new pen, but the screen itself does not work. I mean, the stylus does not work with the screen.

  I have a mouse, and another menu pointing devices in Device Manager and it includes the following submenus:

  HID compatible mouse (I use the random DELL mouse)
  Mouse PS/2 Cimpatible (?)
  --------

  I think there must be something else...
  Please tell me, forum, what drivers should I download to get the pen to work?

  Stand by. Are you using the original image of recovery Toshiba (operating system) or you have installed your version?

• Portege M200: Rotation utility does not work with the new driver

  Hello

  I have a Portege M200 with the Gforce 5200Go. Since the last officially available graphics driver is the 46,44 I changed the 93.71 and installed. But the Rotation Utility does not work with this driver.

  When I use the driver nv for the rotation of the screen the tabletpen's is more synchronized: move the tabletpen left results in movement of the mouse to the top etc.

  Anyone any ideas?

  Hello

  You must use the page of the Toshiba driver graphics driver and not the original on the graphics card manufacturing site

• From a Portege M200 battery mode screen

  Hello, first sorry for my English, I am not totally bilingual.
  So I got a Portege M200, with the model number: PPM21E-02QFZ-FR, serial number: 55893043G

  This work of the computer laptop but fine * when I unplug the AC adapter black screen come *, when I reconnect light screen again (he continues to work, but without screen because it serves not next).

  I have try the Fn + F5 combination, not worked, try to change performance settings in windows, without change.

  When I go into the BIOS I can make it happen this problem even if the AC is plugged by changing the value of the field 'battery saving mode' to 'full power' to the other (when I change the screen turns off the coast).

  do you know how to fix this?
  Thanks in advance

  > This laptop work well, but when I unplug the power of the screen in black, when I reconnect light screen again (he continues to work, but without screen because it does not fuel nearby).

  Sorry I mate m afraid I did not understand it correctly.
  If you unplug the AC adapter, the screen turns off.
  But what happens if the power adapter is connected again? You say that screen lights up again, but then said you that you can work but no screen.

  So I'm confused now

  In my opinion, you should check the Windows power options.
  Usually, if the AC adapter should be disconnected, the laptop will switch to another power plant (battery mode).
  In my opinion, you should check the settings of the power station, which is used if the AC adapter is disconnected.

• Portege M200 - CPU runs only at 598 MHz! Basic BACK Toshiba Service tool

  Portege M200 - CPU runs only at 600 MHz

  I have a Portege M200 with a Dothan Pentium M 725 supposed to run at 1.6 ghz, but posts a 598 Mhz
  frequency. I updated the bios to 1.8.

  I read in a previous post "locked"...:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63390

  .. He's supposed to be a base of BACK of Toshiba utility to fix the problem. .
  It is said that this is not a Bios problem...

  Can someone direct me to this utility?

  Thank you!

  Gary

  The answer is here... thanks all and who is responsible for:

  http://forums.Toshiba.com/T5/Qosmio-laptops/598-MHz/TD-p/194566

  The key is a utility called 'pom200t1 '.

  You will need the following.

  A floppy disk or if you do not have an external floppy drive, or if you are common sense to be able to boot a file from a CD player.
  You must also WinImage, as all files that you download come as .ima files
  Download pom200t1 - V1.5.zip and pom200t1.zip (if if doesn't work either).

  You can find them here:

  http://www.stormpaintball.com/Toshiba/pm765.bin (this one is a ditch last attempt).
  Then follow the instructions on the site I posted before:

  Symptom: CPU remains constantly 598 MHz.

  * Process: *.

  (1) boot in the BIOS. (Press "Esc" during the boot process, before the loading of the operating system, but after having entered your password, if you use the startup password protection).

  2) look under 'Other' category.

  (3) if the motherboard does not have enough information about the CPU, the category 'Dynamic CPU frequency Mode' appear on (you won't see it).

  If the laptop is in this state that he won't ever faster than 598 Mhz until you perform the following procedure.
  Note: Although this utility said it's for a Toshiba Portege M200, the particular difficulty you need may work on other Toshiba laptops.
  He has worked on 3 different Toshiba Satellite Pro M15 S405s, but * USE at YOUR OWN RISK *.

  (1) start Windows and create the startup disk in the pom200t1.exe file.

  (2) boot from the diskette you just made.

  (3) in the menu, select the initial repair option 2 "set config".

  (4) in the following menu, select option 1 'Initial cofiguration"(misspelled)

  (5) after a few seconds, you should see "Writing a file is over!" and the laptop restarts automatically without asking for confirmation.

  (6) when restarting the laptop go back into the BIOS and look under 'Other' category. You should now see the "dynamic CPU frequency Mode". Make sure it is set to "Dynamically switchable" for the CPU limitation.

  7) restart Windows and make sure that the CPU can throttle in normal conditions. The Intel SpeedStep technology icon should now be in the systray. Go to the Toshiba power management / Power Saver Properties and update all of your methods to save power to use technology SpeedStep that you prefer (fixed or automatic) and mount all caps speed processor, or you can go above 798 MHz because cursors will always be to their previous settings (4 or less), while they can now go up to 7. Let me know how you go.
  I have fixed the CPU now just need to find out why my fan only works when I activate it manually!

• Portege M200 does not start

  I have a Toshiba Portege M200 with Microsoft Windows XP Tablet Edition. When I turn on the computer, I get the following message is displayed:

  PXE - E61: Media test failure, check cable of
  PXE - MOF: Exit Intel Boot Agent
  Insert system disk in drive.
  Press a key when you are ready.

  When I insert the recovery and Applications/drivers DVD Portege M200 Series, the same message will reappear.

  What is my next step?

  Thank you.

  This message appears only if the safe portable couldn t of the other sources and tries to boot from LAN.

  The question is; Why the Portege M200 doesn't boot from the HARD drive?
  In my opinion, there are two possibilities; There is no OS on the HARD drive or the HARD drive died.

  I think that this should be checked first

• Portege M200: How to rectify failed update Bluetooth Stack

  I was upgrading from the Bluetooth stack in my portege M200 with drivers on the Web from Toshiba website. in the end, my laptop has hung up. Had no choice but to resatart the same.
  Eversince that features bluetooth watch errors whenever I am train to reinstall or unisntall the incomplete installation, I get a message ' looking for Bluetooth Stack for Windows Toshiba.msi ' because there is no trace of installtion of the same.
  Now neither I can uninstall installation of half of the upgrade niether can I re - install the upgrade.
  I'm in trouble and need help?
  Is there a way to fix this problem

  Hello

  try to reinstall the older driver. If this does not work, I think that you need to restore the system.

  Good bye