Portege M200 with external DVD drive

Similar Questions

• Boot camp with external dvd drive

  How it is possible to install Windows 7 on my old MacBook Pro Mid 2009 using an external DVD drive?

  Because my SuperDrive drive is broken.

  Yes, there is a way, I remember that when I swapped my Superdrive for a disk hard while my old Macbook could not start Windows USB.

  you need vmware Fusion and refined installed

  It's a little tricky because not apple USB drives do not work when booting the operating system, but it works if you read carefully. basically the process starts as usual, put the DVD in the DVD USB drive and start to Boot Camp, let to create the BootCamp partition, instead of restarting create a VM with the mapping of physical disk, begin the installation, restart Windows and finish using DVD USB.

  Here is the guide, a bit outdated but might help. Be sure just to what disk you format in the virtual machine, because you are working with the physical disk where you have installed OS X:

  http://www.andrewsavory.com/blog/2011/2156

• [S12, Intel] play video DVDs with external DVD drive possible?

  Hello!

  I am planing to buy an Ideapad S12 (version Intel, ION NOT!).

  Is it possible to play DVD movies using an external DVD drive? (Standard DVD, Blue Ray no)

  Up to what quality (360 p, 480 p, 720 p) is possible to Watch youtube with ION flash videos no S12?

  Thank you!

  <4711>

  I have the S12 Intel and can watch DVDs ok with an external liteon drive, he also plays bluray but the S12 won't.

• Portege M200 with external monitor - what is the best resolution?

  As a result of a recent post on using an external monitor with the M400, I have a question on the use of one with the M200. I realize that the M200 uses the graphics card Nvidia rather than the graphics card Intel in the M400 - is it better with regard to the use of an external display is concerned? The M200 manual says that it will support up to 1600 x 1536 resolution on an external display. I want to use my M200 in a docking station with an external monitor to the extended desktop.

  What would be the best resolution to go with externally? Should I go for 1400 x 1050 screen LCD M200 match? Or could I go for a 1600 x 1200, that should the graphics card (!) be able to cope? Or, finally, if I went to a widescreen 1680 x 1050, how would the face Nvidia card? The screen is not as clear as with the 1600 x 1050 screen?

  What are the chances of work at all? I see in the M400 manual which she is supposed to support 2048 x 1536 on an external monitor, but this seems to be a problem, judging from the other post.

  Any help appreciated - thanks

  Hello

  Well, the resolution of the screen depends primarily on the graphics card.
  If you want to use a display resolution that the graphics card must support. In addition, the graphics card driver is important. If the graphics card will support the resolution of the screen, BUT the resolution is not listed in the graphics driver, so you will not be able to choose this value.

  To my knowledge, if you use the docking station you will get Supportepar as the notebook display resolutions.
  The resolution of the external display also depends on the external display. If the material of the monitor will not support the resolution so you will not be able to get all the images on the external monitor.

  I think the best way is to test that the resolution is the best. Some people prefer the high resolution of small icons and other blind ;) like low resolutions (1024 x 768) because of the large icons

• Satellite A300 - how to use the recovery with external DVD drive disc?

  Hello

  I bought a toshiba Satellite A300 - 15 d

  FTM the tsscorp drive that is installed in the camera no longer works (does not detect any type of media what so ever). ) need to recover the laptop, so I used a USB DVD drive to boot from the restore disc, but after that the charges of recovery console it says waiting for media in the f: drive, which is the tsscorp drive although I used an external drive to load the disc.

  What files should I edit to make it to load from the drive externally and if this isn't the solution, what do I do?

  Thanks in advance

  Hey Buddy,

  Unfortunately I think that it of not possible to use the recovery with external CD/DVD drive disc. Therefore, place the internal for use the recovery disc.
  You can get a new drive to an authorized service provider.

  But if the original OS from Toshiba is installed, you can use the function of disk recovery HARD reinstall Windows as well. Go to the advanced boot menu (F8) and select Repair my computer :)

• Portege M200 error - CD/DVD drive problem - Code 39

  I have a problem. I would like to perform a recovery on my m200 Tablet System.

  I have a dvd external drive (as the m200 has not built into the player) and the correct recovery disk.
  However, because of a problem that occurred some time ago, there is a problem with the driver (+ Windows cannot load the driver for this hardware device.

  The driver may be corrupted or missing. (Code 39) +), and so I can't start the recovery.

  If someone knows a way I can fix the driver, or another way to perform a system restore, it would be extremely useful!
  A solution to the problems of one or two would be great.

  Thank you very much!

  Hello

  > The driver may be corrupted or missing. (Code 39) +), and so I can't start the recovery.
  Are you sure about that? This code appears in running the operating system but recovery doesn't run under the operating system currently running.
  Please try to start the recovery procedure and let me know exactly what is happening.

• I don't have a 93 years old goat needs to answer. I want to buy an external dvd drive, but don't know which is compatible with Windows XP, any help would be appreciated

  I don't have a DVD player on my computer, check the Net tells me tht I would need an external DVD drive that must be compatible with my computer which is Windows XP. I'm pretty stupid on computers and since I'm home linked to diabetic neuropathy, a broken femur that stands with 4 screws a nd a replacement hip and you tell the truth, I don't know what allI must tell you as I said I'm stupid on computers. Please let me know what else, or how I can find something else that you need. Thank you for your help.

  Hello

  Most of the USB 2.0 DVD burners will be compatible XP (be sure to get a burner so you can make CD
  and DVDs and not just play).

  A very good source of information would be supported by the manufacturer of your system and their forums (if any).

  Another good source would be your local computer store or even a major retailer like Best Buy
  or the FRY.

  This is good, but there are many good brands.

  ASUS
  http://USA.ASUS.com/Optical_Storage/External_Slim_DVD_Drive/DVDRW

  ASUS BluRay Combo
  http://USA.ASUS.com/Optical_Storage/External_Slim_Bluray_Drive/BDCombo

  Toshiba external DVD - regular and bluray
  http://www.toshibadirect.com/TD/B2C/accessories.jsp?category=multimedia#1308773303147

  Amazon announces
  http://www.amazon.com/gp/search/ref=sr_st?keywords=USB+DVD++external&qid=1308773384&rh=n%3A172282%2Ck%3AUSB+DVD++external&sort=-price#/ref=nb_sb_noss?url=search-alias%3Delectronics&field-keywords=USB+DVD++burner+external&rh=n%3A172282%2Ck%3AUSB+DVD++burner+external

  If you select a contact that he maker to ensure that it meets your needs.

  I hope this helps.

• Need to retrieve using an external dvd drive for Portege R series

  i've got criptolocker virus, I need to format the computer to load back up, my dvd player is broken, because the computer has drop down in the past. I put the recovery on an external dvd drive CD, but I'm not able to work, it detects the dvd drive in F:, but is not read

  I have format my protégé R700 1 2 but I have lost my recovery disc
  Come posso fare devo formattare it portable mio protected R700 1 2 e non trovo piu' I disco di ripristino. Dove posso find lo. ?

• Dynadock U with USB powered external DVD drive

  Toshiba dynadock U PA3575A-1PRP
  Iomega superslim DVD 31785700 dvdrw8x-u
  ASUS U36J laptop Windows 7 64 bit
  latest updates for Windows and installed Dynadock

  Hi, this external DVD drive has 2 USB connectors (data and power) and no power supply.
  The dynadock has alternating current.
  When I connect the DVD directly to 2 USB ports on the laptop, it works.
  When I connect an external hard drive to the Dynadock USB powered it works
  When I connect the Iomega DVD drive to the dynadock, it doesn't work and I get an error message "power surge on hub port."

  I tested a second dynadock and DVD player (same model) and the same problem occurs.
  I also tested all of the USB ports on the dynadock, front and rear.
  I looked online for limitations on the dynadock, but found none.

  I look forward to any constructive suggestions or information.

  Hello micjam,

  the Iomega DVD drive also not functioning, it is linked to the dynadock?
  No mouse, keyboard or other usb devices?

  Have you tried plugging the dynadock to a different usb port on your computer?

  Perhaps there is an update of the bios available for your computer.

  Check this box

  Best regards

• Satellite A660 - do not find external DVD drive

  Hey guys. Newbie displaying in total despair of and needing help! I posted in other forums without success. I bought a Samsung SH-D162D DVD drive in a USB enclosure to connect to my Satellite A660 via USB.

  I can't get Windows 7 to find! When I plug in the USB cable, the ball comes up to say that it has been installed (sometimes), I can see it on for about 1 or 2 minutes then he falls. It is not listed in my hardware or anything. Its not found in disk management or my devices, so it is not a case to change the drive letter - I can't find the drive to change. I also tried to find upper and lower settings in regedit. Could not find them so couldn't remove them as suggested in other posts of this nature.

  It is set to master, the IDE connector and power connectors are very good. Its got to be a cause of problem of Windows 7 it comes very briefly. In the minute or 2 sound, I can't do anything with it. It crashes right although it will open and close. I've google it and can't find anything. Mainly of registry issues, but they did not help.

  Ive also connected to another laptop with XP and had no problems so I know the DVD Rom works very well and all the cables are ok. Ive tried all 4 USB ports on my laptop and also disabled all the parameters of energy. All with no luck. And I also all Windows 7 update.

  This is exactly what happens to the power out of the Cabinet.

  1. I connect the USB cord then turn on the enclosure.
  2 - I quickly click Start, and I can see the DVD Rom E player beside my computer laptop dvd rom.
  3 - the green bar above starts to fill to the top, from left to right and gets to half way then suddenly disappears icon of DVD Rom and makes the green bar.
  4. He then flashes up in computers laptops DVD Rom icon with a player of Local E drive, but only for a fraction of a second.
  5. sometimes a balloon comes up saying peripheral installation, then the installed device successfully... but not every time.

  And that's all. I'm at a total loss and the cant work, so any help is really appreciated!

  Hi Smee,

  So if you have already connected the external hard drive on another computer, and it worked correctly, it seems to be a driver or compatibility between your external DVD drive problem and and your Satellite A660

  It will be connected to the port USB then you tried to remove all the USB ports on the Device Manager? After that, you must restart your computer and the USB ports will be recognized automatically from the Device Manager. In addition, I would also try updating the chipset driver. New version, which you can download on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Have you also tested other devices on your A660 if they work properly?

• AT100: can I connect external DVD drive & can I get a car charger?

  I received one of these when my friend bought a laptop.
  I've never used before.
  I've read all the literature and surf the net, but I'm still a little confused. A newbie and more I'm afraid.

  * 1 *-I want to use in the car for playing DVDs in the back seat. Can I use the Toshiba external dvd drive?

  * 2-* is there a car charging/adapter plug or anything like that?

  * 3 *-my stereo bluetooth, USB and ipod has access to-what options there are to store & playing music on the Tablet via these

  * 4 *-wifi is possible? I already connected it to a wireless modem; would need a modem separated in the car?

  Anything else I should know to use drive

  Anyone with the patience to help me that would be a popular Christmas gift.

  See you soon,.
  The f

  Hello

  > * 1 *-I want to use in the car for playing DVDs in the back seat. Can I use the Toshiba external dvd drive?

  No, you can't attach an external CD/DVD drive to the AC100.
  The USB port supports the external USB HDD (FAT12/16/32/exFAT) and a memory flash USB (FAT12/16/32/exFAT) for copying data.

  > * 2-* is there a car charging/adapter plug or anything like that?
  Yes, google for cigarette lighter Thrive AT100. Otherwise, you can order part comatibel of ASP in your country.

  > * 3 *-my stereo bluetooth, USB and ipod has access to-what options there are to store & playing music on the Tablet via these

  Take a look in the Android market and search of HiFi Android app.
  But as far as I know if you want to stream music from tablet to sorrows, both must be connected to the same network.

  > * 4 *-wifi is possible? I already connected it to a wireless modem; would need a modem separated in the car?
  AT100 supports LAN wireless

• Satellite M30 - restore the external DVD drive

  Hello
  I have a Satellite Pro M30. There is a problem with the drive DVD internal Multi - replacement will take a month or two to get here. I need to perform a restore on this machine. I connected an external DVD drive to the machine. When I start the machine starts on the restore CD but seems so looking for a Player X, I get the following messages displayed on the screen of the BACK:

  Device name: TOSCD001
  Number of units: 1

  CDR101: Not ready reading drive X
  Quit, retry, fail?

  Insert the recovery CD #1!

  What should I do?

  Kind regards
  Sameer

  Hello Sammer

  Unfortunately the recovery media is created to be used as internal drive only. I put t think you will be able to use it with an external device. On the restore CD there is a ghost image and it is not easy to fix it for use with an external device.

• External DVD drive no longer recognized

  I have been using an external DVD drive for HP for years. About 2 months ago I finally exchanged my tragically old iMac for a recent model directly on the Apple Store and have been using the DVD player with it successfully. I do not use the everyday player, but I use it regularly.

  Last night, I put a DVD in the drive, and it worked fine. Later, I got another in the drive and nothing. The drive spins up and down constantly, but the Finder does not recognize anything. Any DVD doesn't appear in the sidebar or on the desktop, the DVD player application does not start. There is simply nothing.

  When it happened first, I removed the disc that would not play and put in the previous drive who previously worked. It worked again, so I leave the app, ejected Disc #1 and put the #2 drive in. #2 drive still does not work and has no other disk since. Not #1, not disk #2 disk, no disc worked. I tried to put in an old OS 10.6 Snow Leopard install DVD just to see if the iMac would recognize it, but it's not.

  I tried to disconnect & reconnect the drive by connecting the drive directly to the iMac instead of in the USB hub, restarted the iMac with a DVD in the drive, etc., but nothing works. System Profiler recognizes not that the player is even when it has a disk in it and turning. Disk utility does not recognize anything.

  I did not perform any software updates or any setting between replace disc #1 Disc #2. Something that worked a minute literally stopped working and I have no idea why.

  While it is true that the DVD player can have mechanical problems, I don't think so and I have no way to test this because I don't have another computer I can plug the drive in. And really, it sounds like a software problem. The drive does not sound hard, or anything like that. I think that the drive reads discs, but the iMac just does not see any longer, so the reader just guard spinning up and down, waiting to be recognized.

  Apologies if other threads have taken into account this. I searched, but I have not found any matches.

  Please make a LANDAU and SMC reset by iMac SMC and PRAM reset and then test again.

• I'll be able to use the external dvd drive on microsoft surface?

  I like really the surface so far and I was wondering if I'll be able to use an external dvd drive on the surface because there only 1 usb port.

  Yes.

  You can attach an external USB hub or port replicator and connect USB devices to one. And, if connected to the network, you can use the DVD player on any other computer network with any active permissinns and sharing.

  http://www.StorageReview.com/samsung_intros_wireless_optical_drive_and_portable_bluray_writer

  In addition, there are at least a DVD player wireless.

  Tom Ferguson

• Satellite A660 - cannot install Win 7 using the external DVD drive

  Hello!

  Not so long I asked help to reinstall win 7 on my laptop.
  The only option was actually in the restoration of order dvd what I did. Today, it has arrived.

  Problem is, or was that some of the CD or the DVD couldn't be read for some reason any.

  Now it won't boot from the cd, it says faulty hard drives.

  So what I did I have pluged my detached external DVD drive and it started from that.

  But just after a few seconds, she told me to '1 support recovery' and open the drive in the laptop. Tried to insert the disc - nothing, like its not inserted, tried to disable computers portable cd - nothing please help

  Hello

  You should first check if the external CD/DVD drive is recognized as a boot device.
  Connect the external USB CD/DVD drive and switch on the device.
  Press F12.

  Now, you will see all bootable devices. Generally, the CD/DVD USB drive should appear if his support. If it does not appear, you will not be able to boot from the external USB CD/DVD drive.

  In this case I recommend you to create a bootable USB flash memory and install Windows 7 from USB flash memory