Portege M700 - water in the screen

Similar Questions

• Portege Z930-10F - broken the screen twice in just 3 months

  I am user of laptop for 12 years. On 30 July, I bought my Portege Z930, thinking it was my best decision for many years.
  Less than a month later, at the opening of the screen during a flight, it s simply broken the screen, it is impossible to use the most.

  After sending to the official service in Spain, told me it was my fault and bad usage, so I had to pay more than 300 ($ 400). I told the customer, explaining about their excessive flexible top and rigid screen support and nothing again.
  It's only my fault.

  Last October, 11 again at the opening of my top, this time by using a label of band fixed by myself, in order to avoid the mixing of the screen, it scraped again.

  I can't afford it is only my fault, but it's a real design problem, for the lighter ultrabook in the market.

  If someone can give me the support for this serious problem, it will be very appreciated

  Hello

  It's really amazing story and I think you're the first person who says something like that.
  Portege Z930 has long been on the market and I have never heard of these issues.
  Please don t get me wrong, but it is really strange that happening already three times.

  I saw this machine and all the construction seems pretty stable for me. When you open the screen, I hope that your fingers are placed in the middle of the display panel and not by the side. The pressure on the hinges of the screen coverage must be the same. If you want to display on one side only, I can imagine that something like this can happen, but it shouldn't t.

  Portege series is one of the best portable Toshiba s business so I think that the Toshiba and technicians designer take very seriously and I can't imagine that they make this mistake of design.

  I still have some old Portege 2000 and it was lighter for laptop at this time with very sensitive display and the hinges of the screen cover, but there is no problem at all.

  We can discuss here everyday and I really hope that someone with the Portege even can post experiences, but all of that, that you try to clarify with Toshiba. Be careful when you open and hold the display in the Middle only.

  Good luck.

• Portege M700: Cannot use the fingerprint reader after update for Firefox 3

  Hey

  I have a Toshiba Portege M700 Tablet and with the truesuite software on a fingerprint reader and password Bank plugin.

  It's all working fine and dandy with firefox 2.
  Then last night I went and updated for firefox 3 and now I can't log in to Web sites with the fingerprint reader.

  No error messages, nothing. I can say that the truesuite or Bank password software is not detecting firefox 3. I've updated to the latest version that I could find, 2.0.2.0.

  I found this thread by telling me the process of update of firefox it breaks and I should completely uninstall and reinstall firefox, which I did.
  That didn't fix it.

  Then I completely uninstalled and reinstalled truesuite. That did not help either.
  Its still broken.

  Anyone know a workaround or a way to fix this, or should I wait and see if there is an updated version of the password database? (I find it unlikely because this isn't really a standard program)

  Hello

  I think that the new Firefox version is not fully tested and possibly it s not completely compatible with the 3rd party applications.
  I remember the same problems with older versions of firefox. Finally, it has been resolved.

  But why you don t use internet explore? As far as I know the fingerprint works without a problem

  In any case if you want to continue to use the browser firefox 3 so I think that the only solution is to wait for an update.

  Concerning

• Portege M700: Question on the fingerprint log-in

  Hello

  I have my own Portege M700 today and I decided to perform a clean installation to remove the bloatware.

  Now, I installed an OEM Vista Business 32 bit and I installed all the drivers and software to make it work properly, for all, but a function.

  The connection option.

  How to configure application/toshiba fingerprint utilities into letting me have the option to type my password or drag my finger to log on?

  The default value of the factory were the two options available, but now I'm stuck with only 1 choice, and it bothers me a lot.

  Thanks in advance for your help.

  Hi Tristan

  It would be very interesting to know if you have found the answer to your question.
  Feedback would be appreciated ;)

  See you soon

• Portege M700/106 enter the BIOS Setup

  Hello
  How do I enter the BIOS to my laptop Toshiba Portege M700/106? Delete and F8 didn t work?

  Try with the ESC key.

• 7 years said she d ' t but now admits that she did... spray some water on the screen of the PC I let him in her room!

  Well went and at the bottom of the screen are three black circles.  An about 1 '' 1/2 acoss and two smaller approximately 3/4 "overall.  I put him on the witness stand and after that interview was made, I discovered she sprayed water on the monitor and then pushed with his fingers and thumb in circular motions as she was wiping. (elle a d'abord laissé de côté le facteur eau) who took an hour to get into evidence.) I thought I was just facing a 'matter of finger pressure.

  So it's a flat screen LCD, nice 20 inch I think.  It will have to either live with it that she can because it's downstairs.

  But... I think she does this to his scetch of e etche once and it was not fixable... What do you think on this issue?  There is no way to open it in the back. It's a monitor Optiquest ViewSonic LCD flat screen.  3 or 4 years. Any ideas?  Or is he just grounded for 2 weeks and off Club Penguin?  Thank you...

  You have already inspected and determined the extent of the damage on the monitor. It's your call.

  BTW, what is your problem with Windows Update?

  TaurArian [MVP] 2005-2011 - Update Services

• Portege Z830 - backlight of the screen remains off after sleep

  Hello guys!

  As described in the topic, the display backlight remains always off when my PT225E z830 returns from sleep mode. It's the only backlight, because I can see the image weakly if I have the screen against a light. Also using FN + F7 does not alter this State. The only thing that works is to restart.

  Y at - it an update of the display driver? Or is there any workaround to get back the backlight of the screen?
  Moreover, the bios is up-to-date with the version v1.60.

  Thanks for the reply!

  Hello

  Have you noticed this problem on the first day of use, or later?
  Have you changed anything, installed additional software or maybe your own version of the OS?

• Portege 4010 - brands behind the screen

  Hello
  I, ve just had two of them, and they all have two points behind the screen. Almost looks like mold or a spill inside the surface, they are not trademarks of electronic type (pixels dead etc.). Can I access the back of the surface before disassembling the lid or isolating this part of some kind of glazing.
  considers that Mick.

  Hello

  I can just imagine what it could be. I checked a few websites on this unit but I put t found no point. If you think that it s a hardware fault, so you should ask ASP for more information and help.
  But you shouldn't t open or remove covers on your device

• Portege M700 - replacement of the battery - replacement work?

  The existing block will charge is no longer. It's a Li - ion PA3191U-5BRS - 10.8V 4700 mAh. I have a spare battery almost new for my earlier Portege with idenitcal fittings but with 4600mAh 10.8V. It is not a model of Toshiba and said that it was to replace PA3176U-2BRS. Can I use it in my M700 without risk of damage or loss of performance?

  Hello

  To be honest, I doubt that it will work because the requirements are different.
  In your case I Don t try, in the worst case, you destroy the computer.

  It would be better if you buy a new battery with the exact specifications. Service provider authorized in your country may make you an offer for it.

• Portege M700, Windows 7 and touch screen

  The Portege M700 was feature touch screen before I upgraded Vista to Windows 7. Now it does not, any more than the features of two fingers that W7 is supposed to offer. Any ideas on how to recover the touch screen feature?

  Hello

  I think that you need to install the driver for the Wacom tablet.
  The driver is placed on the page of the European driver Toshiba
  The WACOM Dual Touch driver for the integrated tablet is required to use the features of the tablet.

  There is also the Extension of Tablet PC Package.
  This package installs a range of important public services.
  Utility _TOSHIBA of rotation: _ define the orientation of the screen by default as the system to be used in the transition from the PC to Tablet mode, or vice versa.
  _TOSHIBA tablet PC buttons driver: _ you can dedicate tablet buttons to perform common tasks so that you can easily use your tablet PC away from your workstation. For example, you can dedicate a button to open a program or to change the orientation of your screen.
  _TOSHIBA accelerometer utilities: _ these utilities are a set of material utilities that work with the integrated motion sensors you machine. With the accelerometer, your machine will be able to detect how you're holding it at one point. You can set the machine to perform a specific function when the device is tilted quickly left or right, either at the front or back. You can also take control of the cursor in some applications and move by leaning the PC in a certain direction.

  But all of these tools are released for Vista when perhaps they will work with Win 7 too check it!

• Portege M700-130 + Portreplicator + external display

  Hello

  We have a Portege M700-130 with the PA3508E-1PRP portreplicator and have a problem with the external display (monitor) connected to the portreplicator.
  The OS is Vista Business. The external monitor is an EIZO S2401WE-GY.

  Now the question:
  * Can you just place your Portege in the portreplicator, start it with the key to the portreplicator and get an image on the external monitor to the connection of the operating system image without doing anything on your laptop? *
  It would already help us if someone with the Portege even and a portreplicator can give us his experience about it.

  Because we can't, but we have absolut want to achieve or better should. We have tested all the settings in the power and hardware configuration options. The point is: when the Portege gets started without portreplicator and is remplace replaced offshore in the portreplicator, then began with the portreplicator the external monitor goes black when loading of the connection of the operating system image. Only after that the laptop screen is fliped open, we get an image on the external monitor.

  Help or an answer, I'd be very appreciated. Thanks in advance!

  Hello

  One of my friends has tested this on the Portege M700 Vista OS.
  It connected the external monitor using a VGA (analog) and DVI port.

  It seems that it works as you suggest in your ad.
  The Portege lid is closed and connected to the external monitor.
  You do not need to touch the Portege M700. He should start by pressing the key of the duplicator.

  Welcome them

• Hibernation and Novatel Wireless Mobilink - Portege M700

  Hello!

  I have a little problem with my UMTS through Novatel Wireless Mobilink connection. If I establish a connection and my Portege M700 leads in the idle state (hibernation), I can't establish a connection after the idle state longer. It seems that the UMTS device would be disabled.

  The button to connect/deconnect-in MobiLink is disabled.

  Does anyone have similar experiences?
  Maybe someone can give me a tip?

  Many greetings
  Steffen Bischoff

  Hmm I m not a protégé M700 owner and I don t use the 3G connectivity, but I read about the problems of Hibernate with Win Vista and XP
  In my case I couldn't t connect WiFi after the reactivation of hibernation.

  My solution was; Windows update, updated the driver WLan, updating the BIOS and disable the option in the properties of the energy saving device.

  That's all I can suggest...

• How to disable the Portege M700 touch screen?

  I have a Portege M700 tablet.
  I would like to disable the installation of the touch screen on it (but not writing or drawing ability activated by the stylus).

  Is this possible?

  My friend has a M700 and it has disabled the touch screen feature, so it is possible.

  I don't know exactly how do it, check the user manual, or go to the control panel and watch in the utility of the tablet.

• How to activate the touch screen of the toshiba portege M700

  I just upgraded my toshiba portege M700 vista home premium to vista ultimate. Finger touch screen is now turned off and I can't turn it back on.

  I went to the pen devices and entry in Control Panel and the relevant tab isn't there.

  Hi Iain K,

  I suggest to install the latest drivers from the computer and check if the problem persists.
   
  For support contact Toshiba using the following link below:
   
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1927814&RPN=PPM70U&modelFilter=M700&selCategory=3&selFamily=1073768662

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Portege M700 will not change the screen orientation

  I installed the driver for the webcam for the M700, and every time I install it, I get the same error message:

  "Open Webcam driver fail - please restart camera or computer."

  I reinstalled the drivers of many times, and it still does not work.

  Therefore, I tried the msconfig method, disabled all the startup process and then reactivated their.

  The webcam shows the same error message, and now the screen will not change orientation when I rotate the screen.

  You try to use Windows XP Home edition or what? Generally, each laptop comes with preinstalled and configured operating system.