Portege R100 - can I configure it to WPA/WPA2?
My Portege R100 is an Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter, which is configurable for WEP only. Can someone tell me if I can improve it so that it is configurable for WPA/WPA2, please?
Thank you.
Phil
Hello
I checked the specifications of this WLAN card on the Intel site and it seems that this cap card WLAN key be configured for WPA.
In any case, is that you've updated the driver for the WIRELESS network and the BIOS card? Two updates that you can find on the Toshiba site.
Tags: Toshiba
Similar Questions
-
Autonomous AP521 can be configured for authentication WPA/TKIP with no radius server?
The AP521 can be configured for authentication WPA/TKIP with no radius server?
the datasheet, wpa with tkip and wpa2 with aes are supported.
you want to use (no RADIUS) wpa - psk with tkip. WPA2-psk aes and tkip not use.
-
Portege R100: Can't see dvd external drive
I just installed a new internal 40 GB hard drive in my portege r100, I partitioned the drive and formatted. I also installed the latest version of the bios (I think it is 1.6) but I can not now install XP to dvd because the portege r100 do not see the dvd drive external usb which I think is a LITE-ON 8 x
Any suggestions?
Using the supplied with the machine recovery CD? Also the machine will only start on a TOSHIBA USB dvd player. If it is not made by Toshiba, you will not be able to boot from it. Sorry
-
How can I configure my E3000 to WPA2 AES?
On the cisco connect (192.168.1.1) page, where can I change the WPA2-AES encryption scheme?
Personal WPA2 uses AES only.
WPA Personal uses TKIP only.WPA2/WPA Personal Mixed-Mode uses both.
For the best security and performance use WPA2 Personal only.
-
Portege R100 and WUXGA(1920x1200) external LCD display
I bought Dell 24 inch wide LCD display.
I thought that my portege R100 can support the resolution 1920 x 1200 because its maximum resolution is 2048 x 1536, but it's not. TT
Graphics chip is trident cyber xp4.
I already tried to use software PowerStrip, but it did not work for the chipset graphic trident.
Is it possible that I can use the resolution of WUXGA(1920x1200) using my portege R100 as regestry change or what ever?
Hello
I found the info that 1600 x 1200 is a resolution supported max for Portege R100. As much as I know there no way to change this through any changes to the registry. As you know the performance of the graphics card can not be changed.
Good bye
-
Configuration and closing the new disk for Portege R100
I just set up a new 40 GB HDD in my Portege r100. I think I need to format the disk before that it will work. How to do this please? I downloaded and installed the latest version of the bios
Hello
If the HARD drive is already detected in Windows Explorer, right-click on it and select format. If this isn't the case, you can use programs like Partition Magic or even your recovery CD to do a first formatting. If you use the recovery CD, the OS will install again, so you have to format the HARD drive again with Explorer.
Good bye
-
Can I use display of Portege 2000 or M100 on Portege R100?
Well, I have a Portege R100 with a broken screen I want to fix it. And I have a Portege 2000 and a M100 with screen work.
It will fit on my R100? They look alike!
Thank you fo of clues!Yes you can.
These notebooks, the Portege 2000, Portege M100 and Portege R100, use the same 12.1 "1024 x 768 TFT color.
I put t see problems with the replacement and fitting element -
Portege R100 - BIOS can't see 1.8 inch 2 GB PCMCIA HDD
Hello
I have laptop TOSHIBA PORTEGE R100, I wanted to reinstall win XP using PCMCIA HDD (MK2001MPL).It is easily detectable by Windows XP, but it is not detected by my BIOS v 1.3 (I changed the boot priority).
I should mention that I formatted FAT32 and saved, copied, but it still does not work. Is it possible to start the PCMCIA HDD with BIOS, or I can use it just as internal HDD.
There may be special driver or another method to solve my problem.Waiting for response, any advice would be helpful...
Hello
the problem is that the HARD drive is not supposed to act as a normal player. It s, more an extension and I'm not sure I have it would actually work in the BIOS as you describe.
I think that it wouldn work because the HARD drive need a driver that is not given when just the BIOS is loaded. BIOS loads network PCMCIA cards, but I've never heard of a PCMCIA HDD which was used as a bootable disk. Maybe USB but no PC Card.IMHO, I think you should drop your thoughts on using the card as a bootable drive and use it as a normal internal memory expansion.
In the opposite case: google is your friend :)
Welcome them
-
Can I use restore with disk CD external non-Toshiba - Portege R100?
Hello
I'm trying to recover a Portege R100. Y at - it another way to do it rather than using a player "Recommended Toshiba", I already have three external drives and don't really see any point in buying another.
Any help would be appreciated
Nick
Hello
I think that this should be possible. I mean, why not? Why toshiba reduce to their own records?
Just use one of your hard drives external and gives maybe a little report how it worked.
Welcome them
-
Portege R100 - CPU usage 100%
Hello!
Everyone knows about this problem?
My Portege R100 after installing the new copy of Windows XP and directly after the installation of the display driver, Trident (reboot) bizarre behavior.Welcome screen goes white on the lower part (when the first yellow line is). Then I have some software problems.
When to start records search engine, when I update the list of wireless networks and I explore the files by clicking on 'My computer', (this does not happen when I right click on START and 'Explore') displays CPU usage 100% and everything is so slow that I can barely move a cursor.
Everything goes back to normal once I closed above applications.
I can install all drivers and all right, but after Trident display it is bad.This is the driver I use since I bought the laptop, I do not know that is fine.
I installed it several times before and I have a few copies of it, which I've already tried so it must be good.The cross thing only my mind is a hardware failure.
Someone of you knows than before?Thank you...
It has nothing to do with your computer - this is the trident driver problem - there is a work - around
Try changing your display configuration-(1) right click on your mouse to the desktop to bring up the display property, and then click Advanced - here, you will see a tab say somethng like 'graphic acceleration.
(2) reduce the rate of acceleration - move the tab to the left - make sure it is not full
(3) this trident driver can cause the BONE to redraw the screen whenever you move your mouse with some applicationsIf my post is not detail for you
Try google with the keyword "how to turn off the graphics acceleration in windows xp" - you will get some good instructionsThat will solve your problem!
Good luck and enjoy your nice laptop!
Arthur
-
Portege R100 - how to install after Exchange of HARD drive?
Hello world
I'm new to this forum and I want to know exactly where I'm wrong. I have this portege r100 laptop and the hard drive gave a few days ago. Because I am a novice when it comes to computers, I left the laptop with an engineer, that I found on Kijiji.
Unfortunately, the engineer could not load any operating system on it. I go through this forum and loads found useful answers, but alas, still the same problem.
Could someone guide me in the right direction. I would be really grateful that I have exams coming next week and really need the laptop.I don't have any CD-ROM compatiable only an external floppy drive.
I tried to install using the windows startup disk (x 6 downloaded from the microsoft Web site), but after the 6 disc it asks me 3 options.1. press ENTER to install
2. recovery console option of
Output 3.F3When I press on enter is not superimposed my cd rom which I figured out is not compatiable. If I leave the connected cd rom it says unmountable boot disk. It gives me a bsod. Is there another way, I could install the operating system using only the FDD.
I'd appreciate it really all the help of the experienced members of this forum.
Thank you.First of all, you can not use any external CD/DVD drive... you must use a compatible and recommended by Toshiba.
Secondly, I you could try to connect the HARD drive to another computer using the USB caddy.
Then copy the i386 to the HARD disk folder.
Then, you can run the winnt.exe file to start the Setup program.Once configuration is complete plug the HDD to the Portege and tries to start
It is only theory, but maybe it won't work -
Hi all!
I want to update the bios of my Portege R100, I downloaded this trought this site:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_bios.jsp?service=EU
unzipped and started install2.exe but I receaved this error:
"* [Error] BIOS update is failed. "BIOS is not able, updated on this configuration."
Windows xp sp2
No installed external deviceCan someone help me?
Thank you
Hello
You can download another version of the same-update bios here:
http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_dtlViewDL.jsp?soID=1153942&MOID=385411&RPN=P PR10U
This file contains more information on the execution of the update, see the readme file
You can do an update directly in XP or make a bootable floppy or bootable CDIf the "live update" in XP does not work, you will need at least a key-USB-fdd, most of them is easily recognized by the bios (hold F12 during startup and choose the fdd)
-
USB 2.0 blue screens on Portege R100
Hello
I have a Portege R100, when you insert a USB 2.0 device it blue screens and you can t do something. But if you insert a USB 1.1 device, he is very well, I tried the upgrade to Windows XP sp2 and this t hasn't helped any ideas.Thansks
Hello
Try to remove the USB entries in Device Manager, and then restart the device. The ports should be recognized and installed correctly. In my view, it cannot happen without any reason. It will be interesting to know since when this problem started.
-
Portege R100: Duplicate UUID
I recently got a few laptop computers Portege R100 Toshiba back after repair.
It seems that some of them have the same UUID and this causes problems with our asset management system that uses as primary search key.
Does anyone know of a tool that I can use to reset the UUID on a Toshiba Portege R100?
Hello
Perhaps these URLS will help. It contains a UUID generator and a brief description of the UUID!
http://Kruithof.xs4all.nl/uuid/uuidgen
Sammy Bye
-
Dear friends,
I have a problem with my newly purchased Portege R100. When I try to switch (or in hibernation mode, in fact), it starts the process and then stops and displays an error message saying that it is in conflict with the keyboard player and I might need to update this.
Of course when I try to update, it shows not any update for the keyboard drivers.
I was wondering if anyone has experienced the same problem and how you solved it.Thank you
RiccardoHi Riccardo
As far as I know, this problem may occur if you use the external keyboard because for now what laptop enters standby or hibernation to stop all active processes. Now there may be some conflicts because many programs or processes can make the problems by putting off circuit.
The external keyboard?
Maybe you are looking for
-
Vista SP1 on Satellite A210 problem
Hello I just install the SP1 of Vista and since my laptop is not restart or shut down properly. If I choose "shut down" the closing screen appears, but the laptop will not turn off. Then the screen turns black and that's it.Enyone has encountered the
-
HP Envy printer 4500: don't know what mean icons for ink levels
When I want to check my ink level, what happens with two different icons for which, I suppose, is the ink cartridges. It has an oval icon below it, and the other which seems to be a symbol of infinity. I'm not sure what each represents. Once again I
-
The Surface will have the ability to run Windows like Word and Excel programs?
The Surface will have the ability to run Windows like Word and Excel programs?
-
How can I change the recipients suggested during the composition of messages in Windows Mail?
The drop-down list of recipients proposed in Windows Mail has multiple entries of the same name and the number of obsolete entries. Where it is stored and how to remove old and unwanted contact names?
-
I get a Mode not Optimum / recommended Mode 1920 x 1200 on my game and he's not coming how to get down off the coast?