Portege R500: login screen don't work with fingerprints

Similar Questions

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.

• Any REFLEX Cannon is 29 min video stop and don't work with cards sdxc fornat Exfat No 4 GB

  Any REFLEX Cannon is 29 min video stop and don't work with cards sdxc fornat Exfat no limit 4 GB?

  For the VIDEO?

  Thank you

  Almost all of the Canon 'Vixia' line of cams are less than 1 k $. The Vixia HF G30 $1150 and it is the only model over $1 k.  Here are all the models to consumer prices.  (X XAnn, XFnnn, & XCnn series is top of the line, and of course the EOS film bodies are much more expensive.)

  As far as I know, they all supports SDXC cards.

• X230T - buttons under the screen don't work - help?

  

  I love my ThinkPad, but the buttons under the screen don't work to rotate the screen etc. I can't find a solution. Help?

  Welcome to the community.

  the first thing is to check that you have the drivers latest tablet installed button.

  If you look at the matrix driver here: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073838

  Look in the selection 'mouse and keyboard' and select the version to match your operating system and open the readme file. It will tell you how to determine your version and the latest version fixes and how to install it. Note that the matrix is generally more current than tvsu.

  Please post when you had the chance to watch and we will try to help others.

  Cheers.

• ADF Mobile: Custom Login screen does not work

  JDEV: Build JDEVADF_11.1.2.4.0_GENERIC_130219.1415.6370

  I replaced the default connection as a result of my own using:

  I copied the default page to deploy folder public_html Application Controller.

  Then changed all references of javascript to... /... /.. /www/ and it looks similar to the following:

  "< script type =" text/javascript"src ="... /... /.. / www/js/base.js "> < / script >"

  "< script type =" text/javascript"src ="... /... /.. / www/js/phonegap-1.0.0.js "> < / script >"

  "< script type =" text/javascript"src ="... /... /.. / www/js/adf.mf.device.integration.js "> < / script >"

  The deployment of the app for the ipad:

  The login screen comes up with the following on this subject error message:

  Unable to load the JSON resources: js / profile - login.json: empty response

  Error: a profile is required to configure the basic page

  If I use the default page, then it works fine.

  No idea what is happening here?

  Vik

  OK, so the documentation missed the point that all the css and js are necessary to be copied as well with folder www login page.

  After having done that it solved the problem

• Portege M200: Rotation utility does not work with the new driver

  Hello

  I have a Portege M200 with the Gforce 5200Go. Since the last officially available graphics driver is the 46,44 I changed the 93.71 and installed. But the Rotation Utility does not work with this driver.

  When I use the driver nv for the rotation of the screen the tabletpen's is more synchronized: move the tabletpen left results in movement of the mouse to the top etc.

  Anyone any ideas?

  Hello

  You must use the page of the Toshiba driver graphics driver and not the original on the graphics card manufacturing site

• Re: Portege R500 - FN keys no longer works

  Hello

  I have a laptop Portege R500, and suddenly the fn keys stopped working. I looked for off site Web from Toshiba, but no pilots have had no luck and also tried reinstalling the common Modules (I just re-installed, it is necessary to uninstall anything before hand?).

  I use the OS is XP SP2. I tried a system restore and don't really want to do a full system restore.

  Basically, I just want to get them working again.

  Any help would be appreciated and thanks in advance.

  Matt

  Hello

  The common Modules should be resettled in too, but it would also be necessary to reinstall the Hotkey utilities for display devices.

  By the way; You must clean the registry using the free program called CCleaner.
  You can download many Web sites. Google simply

  After use of this applications reinstall the common Modules and the Hotkey utilities for display devices.

  Good bye

• The mouse works in the login screen does not work after logging in

  I have Asus new laptop with touchpad mouse.  First two weeks worked satisfactory mouse.
  The mouse works now, after booting the computer login screen (i.e. the scrolls of the mouse on the screen and can use the mouse buttons to select the user).  However, once connected, the mouse does not move.  Just it centered in the screen.
  Manager device indcates unit operate properly.
  Thank you!

  The laptop is new, contact Asus.

• Portege R500 - blue screen after installing Windows XP SP3 home edition

  * computer toshiba Portege R500 laptop *.

  * non-modele ppr50e00j00fs4 *.

  SP3 installed via update-site, received successful message SP3 installed restart... now bluescreen an impossibility to restart! Not even in save mode!

  If I try to start with the InstallationRecommandations, I get the following message:

  STOP: 0X0000007E (0XC0000005, 0XF79ED8EB, 0XF79ED7F4, 0XF79ED4F0)

  Can someone help me please?

  Hmmm. seems that this is a known Microsoft issue because I found these MS knwoldge base article:

  How to troubleshoot a Stop error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182/en-us/

  Microsoft has stated that:

  + These problems may occur if a system thread generates the error handler catches not an exception. You receive this error message if one or more of the following conditions are met: +.

  + If this issue occurs after the first restart during Windows Setup, or when the Setup program is finished, the computer does not have a sufficient disk space to run Windows. +
  + If this problem occurs after the first restart during the installation of Windows, or once the installation is complete, the computer's BIOS may be incompatible with Windows. +
  + Incompatible video card drivers. +
  + A chauffeur service or system device damaged. +
  + If the problem is associated with the Win32k.sys file, it can be caused by a control program remote third +.

  I recommend checking the solution proposals published on the website of Ms.

  Good bye

• Portege M200: serial port does not work with port replicator

  Hello
  I have a Tablet m200 and the top mentioned dock/replication PA3314-1PRP port.
  As the M200 has no serial port (rs232), I want to use the one on the docking station, but it is not recognized as a device on my tablet.

  Thew network connections and usb ports all work fine and the lpt port is shown in Device Manager. I have restored the Tablet and it still does not recognize the serial port.
  How can I get this port recognized so that I can use it.

  Thank you very much
  Lee

  Hello Lee

  I just, I can confirm that when you use the Replicator port advanced III with Portege M200 several ports do not work. Problem is that Portege M200 does not support these interfaces.

  This is a technical limitation and the port of mouse PS/2 port keyboard PS/2, serial port, I.Link (Firewire) port and DVI port will not be supported when Portege M200 is anchored on the Advanced Port Replicator III. :(

• Portege R500 - Flashcard Toshiba has stopped working

  Hello

  I get this error "Toshiba Flashcard has stopped working and will be closed" when I start my laptop Portege R500.
  What is the cause?

  I'm running Vista and my PC continues to run even if it does.

  See you soon,.
  Elty

  Hello

  It's not easy to say what causes this problem.
  In most cases to other parts of the software may affect the functionality of different applications.
  For example, my flash card stopped working after Vista ran some updates.

  I simply removed the old VAP (value added package) of the system.
  I cleaned the registry and the system using CCleaner (free tool) and reinstalled again the VAP.

  Now everything works fine.

  I think you should try the same too.
  Remove the VAP and installed as the new VAP downloaded from the page of European driver of Toshiba.

  Check it out!

• Portege R500 - DVD is no longer working

  Someone at - it ideas why my DVD drive has stopped working?

  I have a Portege R500 - 11 c and in Device Manager I have a yellow exclamation mark against Bus USB controllers / USB Mass Storage Device
  When I click through for more details, he said:

  Location: Port_ #0004.Hub_ #0005

  "This device cannot start. (Code 10)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Search for Solutions has the answer.

  It is strange because it is power to the player, when I put a disc in I can hear him pull up, but it becomes visible to the machine!

  Pointers would be useful.

  see you soon,
  David

  If a yellow exclamation point appears in the device, close the USB hubs\controller Manager, then a USB driver problem would be possible.
  In most cases, a new installation of USB might help to get rid of this annoying problem of USB.

  -Remove and disconnect all external USB devices that are connected to the laptop.
  -Go to the Device Manager and remove the USB hubs and USB controllers.
  -reboot the machine.

  New OS reboot should reinstall USB drivers, and the operating system should recognize the USB ports again. After this short intervention, connect the external USB CD. DVD player and check if it would show up in my computer

  Good bye

• Apparently the login screen does not work...

  I run windows 7. When starting, I get to the login screen. I can move the mouse, but nothing is clickable. The text box seems to have a cursor fixed (not flashing). So I suspect it's maybe an image, but I am not sure. Any help would be appreciated. In addition, I apologize in advance if this is in the wrong section.

  Logon works on safe mode. What's next?

  Given that your machine is running in Mode safe, the problem is caused by something that you load in normal Mode. Run msconfig.exe while in Mode without failure, then uncheck the items under the Startup tab until you find the culprit. I would like to start by unchecking the lot. This will not prevent the machine to start.

• Satellite U920T touch screen does not work with Windows 10

  Hello everyone
  I've updated to win 10 on my laptop & since I've lost the ability to touch my screen, it now works like a normal monitor.
  I searched for several weeks on the net for a solution, but I realized that Toshiba does not care to solve the problem so any who found a solution? It seems to be a driver or software related issue to win 8.1 & 10.

  Hello.

  Even as Dr. Joe... I also upgraded Windows 10 lost touch screen and camera. I returned to Windows 8.1 and I still haven't get touch screen. I seem to have lost my drivers HID Touch Screen as well.

  Anyone have any ideas on how to restore touch screen drivers? I can't find them in the download section of driver Toshiba after hours of research.

• Portege Z20T: Windows 10 - change the orientation of the screen don't work

  Hello

  in the instructions:

  Change the orientation of the screen
  When you use the computer in tablet mode, you can change the orientation of the screen of the computer on the side routing. The screen orientation automatically changes depending on the angle of rotation detected.

  But he won't!
  The operating system is windows 10.

  What can I do?

  This response from Toshiba is a scandal.

  Tut mir sehr leid, dass Sie eine negative Erfahrung mit your Toshiba Gerät machen track.

  Hotel der Themen-Komplexitat und moglicher necessary aufgebaute können Anfragen zur configuration und von the Installer (Treiber, operating system etc.) nicht immer completely by email where werden. WIR bitten daher UH Verstandnis.

  This use Sie bitte unsere umfangreichen online Supportangebote oder wenden Sie an unsere expert unter 0900-18674422 (1.56 Euro/Minute).

  If Sie noch questions haben, zögern Sie bitte nicht, Rubis mit each Kontakt aufzunehmen. You can reach each Montag bis Freitag von 8.00 Uhr bis 18.00 Uhr unter der 52 40 40 00 (0 21 31) telephone

  MIT thank wurde.

  A.i. EMI Service

  Who can help you, what does not help support? ??????????