T430 to 6300 Centrino ultimate upgrade detects the network but cannot connect

Similar Questions

• X 200 wireless problem - detects available networks, but cannot connect to them.

  Hi all

  I have a weird and annoying problem. My X 200 can detect wireless networks but refuses to connecto to them.

  It's a brand new computer that I just received.

  Some info:

  ThinkPad X 200 7454-2HU, running Vista x 64.

  Downloaded latest drivers installed, all using the autopilot to Lenovo download application.

  The driver has detected in the Device Manager is: Intel Wifi Link 5100 AGN.

  There is no problem with the wireless network (the other computers connect to it without any problems).

  I tried to cancel the option "n", leaving a "b/g", but it did not help.

  It is problematic that only one device in Device Manager, and it's "Controller of Bus SM" (cannot understand what it is and update windows or Lenovo update does not solve this problem).

  When I use "Intel ProSet/Wireless Tools" diagnose, I get:

  Test equipment: managed (wireless hardware is enabled)

  Pilotass. Driver is loaded. NET w5v64 Versio: 12.0.0.82

  Radio test: past. The radio is on.

  Scan Testass. There are 12 networks available to connect.

  Association test: failed. No partner.

  When I look at the statistics, it seems that the card receives bytes (nothing is sent).

  What do you think? Is it a hardware problem or software?

  No idea what can be done if it is a software problem?

  S.

  
  

• Satellite 1410 S102: WLan card detect the SSID but cannot connect

  I have no PA3458U-1MPC installed part of the mini-map wireless in my PC Toshiba 1410 S102.
  The card works well, that it detects wireless (SSID) but the problem is that I can't able to connect to my router and also there is no light wireless ON my laptop. Thanks in advance for the help

  Check if the device that you have added to your laptop is working properly. To do this, go to control panel - system - device manager.
  Your wireless network adapter should be listed here.

  Note that you must enter the security key for your router to access the wlan. Another thing you could try is to check the settings of your router or if installed firewall, not that there is any set of restrictions, preventing you to connect.

• I can connect wirelessly to the network, but cannot connect to the internet.

  Ethernet to wireless connection?
  
  

  Hello. I have a Dell Dimension 2400 desktop computer and bought a 50M USB WiFi Wireless LAN 802.11 n/g/b adapter so that I could move my desk in another room and a wireless connection.  I was able to connect it to my wireless printer but am not able to connect to wireless internet.  Is this possible with this computer? If so, how?

  Hey DLD

  Try this link. A lot of good things that have worked for me.
   http://www.SevenForums.com/tutorials/55419-Internetwork-Troubleshooting-Guide.html

• Windows cannot access \\RIPSERVER. You are not allowed to access \\RIPSERVER... I can see the \\RIPSERVER on my network but cannot connect.

  Windows cannot \\RIPSERVERaccrss. You are not allowed to access\\RIPSERVER... I can see the\\RIPSERVER on my network but cannot connect. I'm running with 3 computers XP Pro windows SBS 2003 domain and a Windows 2000 (\\RIPSERVER) runs a computer to plate system that I use every day. I just added a new computer Windows 7 Professional and can see everything on the network (domain), I can access the server drives (where we keep the file sbs 2003), but when I click on the\\RIPSERVER I get error (cannot access...) If I do the same with any of the XP computers that he connects very well. Please help as I cannot connect I have to make my new computer an XP and I wanted to start to learn the Windows 7 operating system. Please let me know if you need more information on my systems.

  Thanks in advance for your help.

  Hi RC383,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum.

  Link, please refer to:http://social.technet.microsoft.com/Forums/en/itproxpsp/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Acquire the msg network but cannot connect to the internet?

  I Tower IBM 'Think pad' and when I try to connect to the internet, it is said ' acquisition of network and it connects don't not in the network, the bars keep fluctuating between 2-4 bar, but still won't connect, a 'fix' I tried it same thing... will to "acquire the network but does not connect."

  What seems to be the problem, what do you suggest to please. It was working fine until last night.

  Have you tried restarting your wireless router? It off for a few minutes, then turn on and wait a few minutes and then restart your computer.

  I hope this helps.

• WIFI on my C850 Satellite can detect the network but will not connect

  I just bought a satellite C850 - PSKCCA-02D00M

  The connection to the LAN works fine however the Realtek RTL8723AE without wireless/Bluetooth will not connect to the network. It can can detect them just does not connect. I used the troubleshooting, and he cannot sort.

  All other devices connect very well as Iphones and Kindle

  In the config is doctor says that the adapter is enabled in a domain and in the adapter another status is down.

  I took back to the initial power and installing and unistalling and reinstalling the adapter using the driver on the website.

  Any help is welcome. I don't want to have to take back just for this issue

  See you soon

  Your WLAN is locked? Can you connect WIFI if you delete the WIFI password for two minutes?
  Have you tried to reboot your router?

• Windows Vista Business ed. reformat - my computer detects the network but will not connect to Internet

  Can someone help me, I can't reformat a laptop compact with a windows vista Business edition OS. I was wondering if I could use the recovery partition or do I have to use an installation CD. And by the way, just to give you a head I'm just a beginner and badly needs help. the problem I had is I get a strong signal for my WiFi, but again it is not connect to the internet it connects sometimes but then after I reboot my phone it comes back with the same problem, it connects to the internet, but I detect my network, someone told me to just reformat the entire system. I hope someone can give me a help step by step on how to do it. and also I do not see the product key for my system. your help would be greatly appreciated thanks

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Formatting/reinstalling is overkill. A bit like buying a new car because you have a flat tire.

  To reinstall, you can use either the volume of recovery or the recovery disc, both should work pretty much the same. In general, the product key is located on the system like a sticker (on laptops usually on the bottom). If you can't find yours, you should contact the provider or your network administrator (and in fact, if there is a working system, you should contact them before doing anything).

  Before you do this right, you can try this: click Start and type CMD. Right click on the menu entry that appears and choose "Run as Administrator". Click on continue in the UAC prompt. From the command line, run:

  ipconfig/release

  ipconfig/flushdns

  ipconfig / renew

  Allow everyone to finish (return to the command line) before proceeding to the next. When you are finished, close the command prompt. See if that helps with your problems of connection.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Able to detect the wireless network but cannot connect

  Help, please!

  I have a HP Pavilion DV6 using Windows Vista 64-bit.

  My network wireless adapter intel is able to detect wireless networks three on my College campus.  I know that these networks is currently (I can access it on other devices and my suitemates can view them on their laptops.

  When I double-click a network dialog box appears and informs me that the laptop is currently connected to the network.  After about 30 seconds it says it is unable to connect and an opportunity to try the troubleshooting options (which, alas, never work).  I recently tried to download the latest drivers for the network adapter, but also, it does not work.  The adapter is turned on via the switch on the keyboard and the HP Network Assistant.

  What should I do?

  Hello

  You have a few options in my opinion please try these steps can help you solve your problem.

  (1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.

  (2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.

  (3) try to do a system restore to the date where unit was working fine.

  (4) Please update the Bios driver & wireless from the HP website.

  (5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.

  (6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.

  If you still have the same issue then you need to call HP tech support and get the replaced part.

• installed Firefox depending on the instructions on the screen, but cannot connect. Have now added the new user name. How to complete the installation?

  I can't connect or open Firefox. Uploaded by on screen instructions but still cannot connect or use firefox.

  Installation of Firefox is not dependent on the signing in. You don't need a username / password for Firefox.

  Please explain what works and what's not more in detail.

• NB200 can connect to wireless networks, but cannot connect to the internet

  I could connect my Win XP netbook to my network wireless secured to the House, other networks and public networks such as the library and McDonald's. This week, I am away from home and discovered that while I can still connect to a number of different wireless networks, I can't connect to the internet with Internet Explorer.

  I had this problem once before and fixed by reinstalling Windows XP and all my other software. I have no idea why it happened again. I'm hoping for a less radical solution to the problem... ?

  Hello

  You can try to renew the IP address.
  Got to RUN and type CMD.
  This would start the console (DOS window)

  Here, you use the command: ipconfig / renew

  It s also advised to update the Wlan driver. I've noticed some problems with older drivers for Wlan
  Here you can get the most recent:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• My XP laptop sees the officejet 6500 on the network but cannot print on it.

  The diagnostic says HP drivers print program are not installed, but they are. My office windows 7 print very well.

  Hello

  Thanks for posting,

  In order to solve the problem, please check the IP address of the printer and then back to the computer and open the browser. In the address bar eenter, IP address of the printer and click GO or press ENTER. If the XP computer and the printer are connected to the same network, the printer page opens.

  If the printer pages opens, please close the browser and click on start and click on printers and faxes or click on the control panel and click on printers and faxes. In the fax and printers, window, please right click on the printer icon and click Cancel all documents. Right-click on the printer icon, and then click Properties. In the Properties window, please click the ports tab and click Add port and select Stanard TCP/IP port and click New Port. This will launch the TCP/IP Wizard, click Next and in the printer name or IP address, enter the IP address of the printer and click Next and follow the on-screen instructions and click Finish. Click on apply, and then click OK in the printer properties window. Then try to print and check.

• My laptop connects to the network but has no access to the internet.

  Another 169.254.x.x problem...

  I watched a lot of discussions about this problem and I tried methods in them, but still no go.

  Laptop Toshiba Satellite P300-061 / SP 2 / Vista Home x 64

  I've been connected wireless with my laptop and my desktop (with an adapter) with no problems at this cottage for about 3 to 4 days.
  Last night, I turned off the ability to laptops to detect the networks with the small button on the side, as I sometimes do.

  I turn it back on today and the laptop detects the network, but it doesn't connect to the internet. If I have limited connectivity.
  I restarted approximately 3 - 4 times and the laptop doesn't always connect. I am currently connected wirelessly on this network with my office and it works fine so that indicates that it is related to the laptop and not the router.  At first, I thought it might be a hardware problem, the laptop detects the network in the list, but it also detects the surrounding networks, which means that the wireless card works.

  ---

  Things I've tried so far.

  1 netsh winsock reset / netsh int ipv4 reset
  2 ipconfig / renew & enough & / flushdns & / registerdns
  3 Rename the connection
  4 restart / complete closure
  5. deletion of the network in the list and return the password
  6 disabling ipv6
  7 try to put the news in ipv4 manually, even though I'm not sure I did it correctly
  8 turn off the firewall
  9 uninstalling the wireless card and reboot
  10. system restore

  I'm really in the ideas and I would appreciate help, maybe I'm not the steps in the correct order, or something.
  I tried my best to search the net for a solution but they do not seem to work, and I'm really in ideas.

  Thank you for taking the time to read my thread and to help me.
  -John

  Edit: I would also add that it gives me the IP 169.254.x.x over any wireless network, I connect to.

  Hi modsiw and VioletStar,.

  You guys might already made with Gloria but give it another go on your system

  Clear ARP table

  Use the NetShell (netsh) command to erase, delete, or refresh the cache of the ARP (Address Resolution) protocol using the following steps.

  1. Click the Start button.
  2. Click the command run and type Cmd in the box text run, and then press ENTER. For Windows Vista, type Cmd in start search and press Ctrl-Shift-Enter keyboard shortcut
     to force the administrator privileges. Enter the Administrator user ID and password and allow any request for authorization when you are prompted.
  3. In the command prompt window, type the following command, and then press ENTER.
     netsh interface ip delete arpcache

  The command works in Windows Vista, Windows XP and Windows 2003.

  RESET TCP/IP ATTACH IT TO THE TOOL

  http://support.Microsoft.com/kb/299357

  REPAIR WINSOCK RESET TOOL

  http://support.Microsoft.com/kb/811259

  Let us know if this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista can connect to other computers on the network, but not to the internet

  I have a Vista computer that I just reinstalled and it is connected through a router Thomson to a Win7 machine and internet (or at least it should be).  For some reason any Vista machine refers to the network as a public network that I can change this private and turn on discovery.  If I do that, then the machine Vista can see the Win7 machine through the router, but cannot connect to the internet.

  I tried to use the disk driver for the Thomson router on the Vista machine, but at the time wherever he tells me to connect cable internet installation program does not detect that the cable has been connected.

  Troubleshooting with software Vista suggests simply reboot the router (that I tried without success).  Needless to say that the Win7 machine connects to the internet fine.

  I was wondering whether to try to remove the connection and start again, but unable to do so because when the cable is plugged in tells me you cannot delete an active connection and when I disconnect the cable network connection disappears and so cannot be deleted.

  Grateful for pointers

  Ian

  Hi IanRC,

  Try the following steps.

  Step 1

  You can try to disable the antivirus software on your computer and check if it works. Activate antivirus once you check the status.

  Note An antivirus program is designed to help protect your computer against viruses. You must not download or open files from sources that you do not have trust, visit Web sites that do not trust, or open attachments when your antivirus program is disabled.

  Step 2

  Try the Microsoft Fixit. Open the link below and click it on the Fixit button.

  http://support.Microsoft.com/kb/928233

  Check if it works and post back the result.

  Bindu S -Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• iPhone 5 c cannot detect the network.

  Since the last 9.2.1 update my iPhone 5 c cannot detect the network.  Constantly 'finding '.  It took to the local repair shop and he told me the imei is missing and only Apple can help.  Any ideas, thank you.

  A missing IMEI is a fatal error which cannot be set. This is usually the result of the attempt to jailbreak or hack the phone unlock illegally, but not exclusively.

  Where, exactly, do you have the phone? It was jailbroken? Never 'unlocked' by one person other than the carrier, so it was initially locked?