Portege R700-185 - software to use direct access keys Fn

Similar Questions

• Satellite 4080XCDT: need XP driver and software to use the Fn keys

  Hello!

  I get a software to use the fn Satellite 4080XCDT.
  I use the laptop under Windows XP.
  I am looking for a driver package or software for Windows XP.

  Sorry for my English!

  Unfortunately, Toshiba European page does not have XP drivers for this good old classic.
  I checked this page under the Archives section and there is only an update of the BIOS. Nothing more :(

  So it seems that you will have to renounce the FN key feature!

• Can I download and activate the software, but use the license key in the box?

  I bought a new laptop. However, there is no CD or DVD drive. I bought Photoshop CS3 and Acrobat Pro8 with my old laptop. Can I download the software from the Adobe site and enable it with the key to the software on the box?

  Adobe does not keep older versions of download, but another site only.  You can download trial on the linked site below and then use your order number to activate.

  http://prodesigntools.com/tag/DDL

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download on this site.

• Portege R700 - Malware with software pre-installed?

  I recently bought a Portege R700 - very well designed and built with an excellent specification. All is let down by the obnoxious behavior of collusion with Microsoft to send malicious software in the software loaded from Toshiba. It is absolutely inexcusable and unacceptable to load software that removes several times my IE8 homepage settings to replace it with MSN and the bling search engine. I hope I've stalked finally how to remove this MALWARE by editing the registry and delete the entries of thugs.

  (Especially from Toshiba) anyone know how I can ensure it is permanently deleted?

  Can someone give me a good reason why I should not report this behavior for the Commissioners of the European Union for violation of the antitrust settlement with Microsoft?

  I am completely disgusted.

  Hello

  To be honest, I never heard malware with software/OS preinstalled Toshiba or Microsoft.
  I m sure all software that will run are tested for the virus, malware, etc. so I put t think you have malicious software installed on your computer.

  I also use the version preinstalled Windows from Toshiba on my two laptops and all the settings, I've defined in IE8 or other programs have never changed.

  I recommend to install an antivirus program before going online.

• Cannot install Webroot software error: problem of direct access component - should close. incompatible tfswct.exe

  Original title: Direct access component problem - must close. incompatible tfswct.exe

  I uninstalled Shield Deluxe, restarted, then tried to start installing Webroot SecureAnywhere Essentials from the installation CD.

  I did not demand the product key so no Webroot software is installed.

  How to solve the problem of tfswctl.exe?

  Hi DW_758,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Install the applications as an administrator.

  HOW TO: Use the RUN AS command to start a program as an administrator in Windows XP

  http://support.Microsoft.com/kb/305780

• Cannot use 8 GB in Portege R700

  Hello

  I had 2 x 2 GB PC3 10600 ram in my R700 (i3) running Windows 7 x 64.

  I have a few sticks of 4 GB of ram, I wanted to update my laptop 8 GB total.

  I put in the memory which consists of:
  1 x 4 GB PC3 12800
  1 x 4 GB PC3 10600

  The laptop comes on the screen where it says "Starting Windows" and looks like it freezes before windows animation.

  If I try to use 1 x 4 GB (two speeds) and 1 x 2 GB, then Windows starts fine, but there is a problem when I use both the 4 GB sticks.

  I tested the ram with Memtest and they pass the tests.

  If I put the bars of 4 GB of RAM in a R840 (Windows 8.1 Pro), it starts very well.
  If I put the bars of 4 GB of RAM in a R700 (i5 running Windows 8.1 Pro), this also starts very well.

  If I try to put in the sticks of 2 x 4 GB of ram in the R700 i3 and trying to install Windows 7 or Windows 8.1 then happens to the screen that says "Windows is loading files" and the progress bar ends but then the screen goes all white and the fan runs but nothing else happens.

  I have 8 GB of ram in the R700 i3, so I don't know that it supports. The BIOS detects it has 8 GB of ram when I inserted them and the BIOS is updated to the latest version which is 2.20 iirc.

  Anyone can shed light on the problem?

  Hi Borito

  If the specification states that your model of laptop can handle with 8 GB of RAM, that we should not discuss this topic.
  By RAM upgrade is important to use 100% compatible and two modules of identical RAM (same specifications).
  I tested it on my machine using too much standard and a cheap RAM and my machine was dead. With two modules of identical RAM, everything is OK.

  Can you please send the name of the exact model of your laptop Portege (R700-xxx) and I'll try to find the exact reference for 4 GB of RAM for this model of laptop.

• Portege R700: Cannot use the two SVGA HDMI on the Port PA3838E-1PRP Port Replicator

  Dear all,

  I have a Portege R700 series (PT311E) and a high speed P/N PA3838E-1PRP port replicator.

  Today, I tried to connect two external monitors on the VGA port and the second HDMI port replicator port.
  Unfortunately, I was not able to configure the laptop / duplicator to * work with external monitors stand *.

  Do not work in this way portable stand and port replicator becomes useless.
  Although it is a default installation on other products manufactured without drivers and special parameters will be needed, I hope that in our case a key combination or a driver may resolve this problem.

  To be even more precise, I don't want to also use the laptop screen. I want to just connect laptop closed and turned off in the duplicator, to turn on the laptop the power button of the port replicator and to have the image on two external monitors.

  Thank you for your quick responses,

  Best regards

  Cristian

  Hello

  What R700-xxx you have exactly?

  How to connect two monitors? Are the two monitors connected only to the Port Replicator or is one of the monitor connected to the laptop and the other monitor is connected to the duplicator?

  Could you please post this?

  I'm not quite sure of HDMI and Port Replicator (PA3838E-1PRP) but many laptops equipped with support DVI dual video output (VGA and DVI) port using Advanced Port Replicator III (PA3314E-1PRP) or Advanced Port Replicator III more (PA3474E-1PRP).
  But this is only possible if the laptop itself supports the simultaneous use of RGB & DVI too.

• Portege R700 internal to screen very dark but can use the external monitor

  Hi guys,.

  just had a question about my Toshiba Portege R700 as the screen went white and I couldn't see the screen or sometimes I could and it was very dark!

  However, the laptop could start up as normal and I could use it normally through an external display!

  Subsequently, I replaced the screen and it started working again (happy days)!
  However, a few weeks down the line the same problem again apparently did screen dies.

  I take off again and disconnect and reconnect the screen just to see if that would solve the problem and he did, back and working again. I even tried the old screen I swapped and that works too!
  So I paid £140 + for a new screen that I didn't need, my question is what is the problem?

  Could not find anything else on this topic so would appreciate any help thanks

  Ross

  Hello

  It is difficult to say what might be wrong here usually black screen can be related to a faulty FL inverter.
  But laptop computer s display supports a backlight Led FL inverter should not be a problem here
  Maybe some loose contacts caused this

• If I create a form using the free trial software, will I be able to use and access the form, after the trial period is over?

  If I create a form using the free trial software, will I be able to use and access the form, after the trial period is over?

  Yes, you can access the project that you created after the trial is over, but you need to back it up.

  Concerning

  Stéphane

• How to remove the trial version of Acrobat DC 30 days that I have somehow on my MacBook Pro?  I don't want the dang thing, and it prevents me from using my Acrobat Pro 11 software.  Trying to access using the tree without end of support for Adobe is reall

  How to remove the trial version of Acrobat DC 30 days that I have somehow on my MacBook Pro?  I don't want the dang thing, and it prevents me from using my Acrobat Pro 11 software.  Trying to access using the tree without end of support for Adobe of really making me cranky.

  Hi thomh65004143,

  You simply drag the Acrobat DC application from the applications folder to the trash to uninstall.

  Then restart your system & install Acrobat XI Download Adobe Acrobat products. Standard, Pro | DC, XI, X.

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• Portege R700 - original recovery image re-failed installation

  Hello

  I have a Toshiba Portege R700 for years.
  As I have already some difficulties, I did a reinstall it a few years since the recovery partition. Directly.

  But, a few days ago, I had some problems with my portege.
  HARD drive seems to be broken because it making the noise and was really, really, really,..., very slow.
  Yes, after you perform a backup of the data for hours and hours (remember, it was really, really slow), I run a complete reinstallation of "recovery partition". It seems to be good, but... never finished the process, with the same noise from HDD and slower HARD drive IO.

  OK, my own diadnostic: change the HARD drive.
  This done, and by using the recovery DVD Toshiba just bought (Yes cannot find the DVD of burn of factors), I have the same question.... The recovery process does not end even if im waiting for days...
  And I have the same HARD drive noise. With the new!

  In order to have an MSDN license, I installed a Win7 Pro 32 bit, but not the Toshiba one.

  And he is running for days without any problem!

  But I have to reinstall all the drivers and software supplied by Toshiba.

  Obviouly I prefer to find what exactly is the problem with this Portege and reinstall the version of Toshiba Windows 7 Pro.

  So, if someonre read the story until the question is: NO IDEA?
  How to do a HW diagnosed? How to identify the exact problem?

  Thanks for your help.

  Joel

  It is really strange. You bought brand new HARD drive or you use a old and used as a replacement?
  Have you used recovery disks in the past with success? I mean maybe it's the recovery disc a troublemaker.

• Portege R700 - external DVD Player compatibility

  I have a problem with a Samsung external super-multi drive 2 year with my new Portege R700-1F3, which does not come with a DVD player. The USB powered Samsung dvd player works fine with all other computers that I have access to:
  * MacBook with OS X 10.5
  * Samsung NP - X 360 laptop computer with Windows XP 32-bit
  * Dell Inspiron Zino HD computer desktop with Windows 7 64 bit

  The symptoms are:
  * When the dvd player is plugged in Portege, the green light on the dvd player goes on and out.
  * This happens in the BIOS, and once that Windows 7 32-bit support.
  * In Control Panel Windows 7 devices & printers, the DVD alternately appear & disappear constantly.
  * When it appears, it shows up as "USB storage device" with a yellow! warning icon.

  I tried all 3 USB ports. The power cable is plugged Portege. I tried the turn of the digital signature when starting upwards. The external dvd came free with my old laptop from Samsung and is the model AA-ES0N09B.

  Any suggestion that this is a hardware or software problem and how to fix it?

  Thank you
  Lola

  Hi Lola,.

  Have you tried other USB devices on your Portege R700 if they work properly?

  If peripheral USB do some problems I would try to remove the USB ports from the Device Manager (right click > uninstall) and restart your computer. After that, the USB ports will be recognized again and you are able to use them.

  If it doesn t help I would try a driver update from the official website of Toshiba chipset. http://EU.computers.Toshiba-Europe.com/

• Portege R700 - 1 DL built in Webcam

  Hello world

  How can I access the built-in Webcam in my Portege R700 with third party software Polycom PVX, for example, in the control panel of this software, I can choose the webcam of toshiba as a video device, but it does not work (no image)

  Thanks in advance for your help

  Hello

  To be honest, I've never heard of this problem, but if you want to use the webcam with external software such as Skype, you must first close the webcam software. Example of webcam starts with Windows and that you should close it before starting, it is a 3rd party program.

  Check this box!

• Portege R700 - gel & fan

  Hello

  I have an older Portege R700 for two days and it has developed a problem of freeze and fan. Actually, he launched the first day.
  Basically the screen freezes and kicks the cooling fan speed and nothing else responds until you make the stop & on again thing. Its happened a couple of times now on two different days.

  Any ideas?
  Send it back?
  Download a little amazing software, I currently don't know?
  Persevere on the toshiba site, until I have find how to contact Toshiba directly instead of you good people?
  Just ignore it and hope it goes?

  Any advice welcome. But please make it as simple as possible because I am a novice regarding the technical stuff.

  R
  (Just in case you think about overheating, based in the United Kingdom and is not a hot day and there is airflow around the laptop. The second gel happened after only about 2 hours of use).

  It is not easy to discuss these issues.
  1 / we don t know what OS you are using
  2 / the operating system configuration is not known to us
  3 / who knows what additional software do you use and what is running in the background
  4 / this occur with AC, battery or both power supply

  I put t really know what to say so at the moment. What you can do, if possible, contact nearest service, visit them, explain the situation and see what they say about all this.

• Portege R700-S1321 - cannot set the resolution of 1366 x 768

  I have exactly the same problem, as shown in:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64809

  The resolution of the laptop to random times and intervals seems to support a maximum of 1280 x 700, which translates into a 2 inch black bar on the right side and the button start Windows 7 off the screen.

  Currently its stuck in the resolution of the screen and no matter what I may not make it back to normal 1366 x 768.

  External monitors very well with the laptop work.

  Its 2.20 BIOS execution that seems to me later.

  It seems that the intel driver must get some information that is incorrect.
  Research on different forums and using moninfo, I see that the internal display does not support EDID and settings appear to be set by the registry somehow.

  I also tried to make an EDID override by creating an inf file that is customized with Moninfo, but appears not to the question of the effect.

  I also tried to restore from the recovery many times discs without success.
  During the installation of windows occurs, the screen is fine.
  When Toshiba additional programs are added to the screen returns to the 1280 x 700.
  I suspect that what happens when the graphics driver intel is installed.

  If I boot the laptop in safe mode resolution is 1366 x 768, which seems to suggest that it is the driver who has a problem.

  Anyone else had this issue and understand how to fix it? I see also that intel do not support EDID override.

  Any idea is appreciated. Thank you.

  > If I boot the laptop in safe mode resolution is 1366 x 768, which seems to suggest that it is the driver who has a problem.

  I think you are on the right track, and I think that his untimely pilot.
  That's why I recommend you to uninstall the Intel graphics driver in Device Manager.

  PORTEGE R700-S1321 was equipped with the Intel® Core i5 - 520 M processor and this processor supports the Intel® HD graphics card

  The latest Intel HD driver can be downloaded directly from the page of Intel:
  [Driver for Intel Core with Intel HD Graphics processors | https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Graphics& ProductLine = graphic + portable + pilots & ProductProduct = Intel % C2% AE + Core E2% 84% A2 + processors + with + Intel % 2 C % AE + HD + Graphics & ProdId = 3231 & LineId 1101 = & FamilyId = 39]

  I need to download the zip package.
  Then you can install the driver through Device Manager by using the Advanced installation procedure. This allows you to link directly to this zip package. Windows system would automatically take the driver. After restarting again you that would have settled the last drivers and you should change your resolution.