Portege R700 - missing rubber stopper, replacements?

Similar Questions

• Portege R700-172 how to replace SSD

  How can I replace the SSD by a standard HDD? Toshiba has used connectors in the R700-172.

  Post edited by: tron

  Hi tron.

  Can you post a screenshot of this special connector?

  AFAIK all SSDS on the market have the same connector, it s SATA port so that I can t imagine that you are not able to install a normal HARD drive, because they have the same port SATA SSD.

• Replacing the drive HARD on Portege R700

  Hello

  I just ordered a R700 and hope to upgrade the HARD drive of 320 GB for one SSD OCZ Vertex 2.
  Is it easy to replace the hard drive in the R700? Should I remove the keyboard is a Panel on the back?
  What size hard disk will - 2.5 "or 1.8"?
  A SSD will be simply connect using existing connections, or something else there?

  See you soon.

  According to the specifications of the laptop Portege R700 has 2.5 HARD drive is HDD with SATA interface, so I think that you should order 2.5 SSD with standard SATA connectors.

  HARD drive is placed on the bottom side near the cooling vent and it is fixed with a screw only.

  Remove the screws and HARD drive. You will see how the HARD disc is placed and how it must be removed.
  It's very simple and you can do it alone.

• Portege R700 - how to replace the optical disk drive?

  Hello
  I would like to replace the optical disc drive (ODD) with a Solid State Drive (SSD) on my Portege R700.
  So my first question is: what is the way to remove the STRANGE?

  And my second question is: can I replace it with a Caddy drive HARD ICY BOX IB-AC642 or Akasa AK-OS2SSA-BK?
  Interface SATA caddy fits with the WEIRD interface?

  Thank you for your answer

  Hello

  It s really complicated because the STRANGE is placed inside and remove it you must remove all the screws that fix the bottom cover.

  I wouldn't, because you will lose the warranty.
  More I doubt you could get the second HDD to work in ODD Bay.
  I think that this is not supported
  Just the laptop s as Portege M400, M700, M750, Tecra M9, S3 or S4 with a select Bay slim support would treat the 2nd HDD instead of ODD.

• Portege R700 - unit to replace DVD with SSD

  Hello world!

  This is my first post in this forum.
  I searched for an answer to my problem and I have not found it so I opened this post.

  I bought a Portege R700-PT311E there are a few butterflies and now I want to install an SSD in the DVD slot. -Does anyone know if it is - it possible?

  I want to install the OS on the SSD drive and let the 500 GB HARD drive to store information.

  Thank you very much in advance,
  Edu

  TrackSmart thanks for sharing this with us!

• Portege R700-19 t - new RAM-> start is no longer

  Hello together,

  so I bought two new RAM sticks for my old laptop
  Toshiba Portege R700-19 t

  But since I installed them, the machine does not start in an operating system more.
  The installed Windows 7 64 bit goes to a black screen before the windows at Startup logo (even in safe mode). And after a few seconds, the fans will quickly but nothing seems to happen.

  The next thing I tried was a (12.04) ubuntu live dvd. But it does not either. No error message or anything, just an automatic restart after a few seconds of black screen.

  The next thing was memtest86 + v4.20:
  It crashes immediately sometimes a black screen and sometimes at this http://i.imgur.com/eJqIyDp.jpg .
  I tested my new two sticks together and alone, still the same problem. The old ones that work perfectly and not crash of memtest.

  In the BIOS is the only thing on the memory and then it sees the correct "Total memory size 8192 MB.
  
  Plug portable-mem from toshiba:

  • Standard: 4 (2 + 2) GB
  • Max Speicherausstattung: 8 GB
  • Technology: DDR3 RAM (1,066 MHz)

  link to the Toshiba product description: http://www.toshiba.de/discontinued-p...tege-r700-19t/

  Cannes-old (work) ram:
  2 x Samsung 2 GB 1Rx8 PC3 - 10600S - 09 - 10 - ZZZ M471B5773CHS - CH9

  new RAM sticks:
  2 x G.Skill 4 GB DDR3-1333 (PC3-10600)
  link to the shop where I bought it: https://www.alternate.de/G-Skill/SO-...roduct/1154622

  In my understanding of both new sticks should work well with my laptop, or am I missing something?

  concerning

  For me, the question is clear enough; the laptop does not start because of new RAM modules.

  The new RAM modules are not totally compatible, or the RAM modules are defective.

  I recommend you test an other modules; for example modules manufactured by Kingston.

• Portege R700 - original recovery image re-failed installation

  Hello

  I have a Toshiba Portege R700 for years.
  As I have already some difficulties, I did a reinstall it a few years since the recovery partition. Directly.

  But, a few days ago, I had some problems with my portege.
  HARD drive seems to be broken because it making the noise and was really, really, really,..., very slow.
  Yes, after you perform a backup of the data for hours and hours (remember, it was really, really slow), I run a complete reinstallation of "recovery partition". It seems to be good, but... never finished the process, with the same noise from HDD and slower HARD drive IO.

  OK, my own diadnostic: change the HARD drive.
  This done, and by using the recovery DVD Toshiba just bought (Yes cannot find the DVD of burn of factors), I have the same question.... The recovery process does not end even if im waiting for days...
  And I have the same HARD drive noise. With the new!

  In order to have an MSDN license, I installed a Win7 Pro 32 bit, but not the Toshiba one.

  And he is running for days without any problem!

  But I have to reinstall all the drivers and software supplied by Toshiba.

  Obviouly I prefer to find what exactly is the problem with this Portege and reinstall the version of Toshiba Windows 7 Pro.

  So, if someonre read the story until the question is: NO IDEA?
  How to do a HW diagnosed? How to identify the exact problem?

  Thanks for your help.

  Joel

  It is really strange. You bought brand new HARD drive or you use a old and used as a replacement?
  Have you used recovery disks in the past with success? I mean maybe it's the recovery disc a troublemaker.

• Portege R700 - Malware with software pre-installed?

  I recently bought a Portege R700 - very well designed and built with an excellent specification. All is let down by the obnoxious behavior of collusion with Microsoft to send malicious software in the software loaded from Toshiba. It is absolutely inexcusable and unacceptable to load software that removes several times my IE8 homepage settings to replace it with MSN and the bling search engine. I hope I've stalked finally how to remove this MALWARE by editing the registry and delete the entries of thugs.

  (Especially from Toshiba) anyone know how I can ensure it is permanently deleted?

  Can someone give me a good reason why I should not report this behavior for the Commissioners of the European Union for violation of the antitrust settlement with Microsoft?

  I am completely disgusted.

  Hello

  To be honest, I never heard malware with software/OS preinstalled Toshiba or Microsoft.
  I m sure all software that will run are tested for the virus, malware, etc. so I put t think you have malicious software installed on your computer.

  I also use the version preinstalled Windows from Toshiba on my two laptops and all the settings, I've defined in IE8 or other programs have never changed.

  I recommend to install an antivirus program before going online.

• Portege R700 does not illuminate

  Hello

  I have a Toshiba Portege R700. The last day or two he was intermittently showing battery low message power when it is connected to the electric network. This morning, he made similarly then closes.

  I put him in charge, but now it does not start if I press the power button (nothing happens). If I unplug the power cord, press the power button, nothing happens. If I remove the battery then replace it, then press the power button, the fan starts momentarily and the screen lights up showing the "Toshiba leading innovation" then it shuts down. I hope that makes sense! I d be very grateful for any advice or opinion.

  Thank you very much.

  What happens when you remove the battery and try to start the laptop with AC power only?

• Portege R700 internal to screen very dark but can use the external monitor

  Hi guys,.

  just had a question about my Toshiba Portege R700 as the screen went white and I couldn't see the screen or sometimes I could and it was very dark!

  However, the laptop could start up as normal and I could use it normally through an external display!

  Subsequently, I replaced the screen and it started working again (happy days)!
  However, a few weeks down the line the same problem again apparently did screen dies.

  I take off again and disconnect and reconnect the screen just to see if that would solve the problem and he did, back and working again. I even tried the old screen I swapped and that works too!
  So I paid £140 + for a new screen that I didn't need, my question is what is the problem?

  Could not find anything else on this topic so would appreciate any help thanks

  Ross

  Hello

  It is difficult to say what might be wrong here usually black screen can be related to a faulty FL inverter.
  But laptop computer s display supports a backlight Led FL inverter should not be a problem here
  Maybe some loose contacts caused this

• Portege R700-1hd: installation of Windows 7

  Trying to reinstall Windows 7 on my R700-1hd but I'm coming through the formidable, select the driver to install page.

  Ive installed s OS on many systems before so know looking for a Sata driver or a chipset.
  However, I can't seem to find, maybe im missing something?

  If anyone could enlighten us about situation or me in the right direction for some drivers would appreciate it a lot

  Thank you

  Chris

  Hello

  All the drivers for Win 7 for Portege R700 PT311E are available on the European driver Toshiba page.

  

• Portege R700 - cannot activate the top modem mobile broadband

  Hi all!
  I have a big problem with my Portege R700 with Broadband Modem built-in.

  I installed the laptop with the Original CD recovery with Win 7-64 bit - all works well but if I press FN - F8 I only activated wireless and Bluetooth but noch Mobile Internet Modem Mobile Broadband is not displayed in the hardware Manager.

  Where the new driver for FN Options?
  How is the correct name of this option?

  I tried to install all the drivers I found here: https://aps.toshiba-tro.de/wlan/?page=3gdownloads

  None of them worked! I did a clean install, once again - no modem, indicated in the hardware Manager.
  He worked perfectly but after the installation of the new 2 weeks no chance.

  * Issues: *.
  *.) don't see a modem mobile broadband in hardwaremanger *.
  *.) FN F8 show no option to activate the modem

  Help me please - it is an urgent problem because I need this laptop for businesses. :(
  KR
  Philipp

  > do not see the modem mobile broadband in the hardware Manager

  The question is: did you buy a Portege R700 with a module 3G?

  I m asking because different Portege R700 were released with different specifications.

• Portege R700 - impossible to pass to Windows 10

  I have a Portege r700 with original Windows 7 OEM installation.

  Windows 7 is updated and program update Windows upgrade me to Windows 10 offer.

  The upgrade process begins very well, download & pre-configures all the stuff, and then finally ask me to reboot the system to continue with the upgrade.

  After a few seconds, the restart process is launched and load... the current Windows 7 system, saying that there was an error during the upgrade process.

  I did some tests; I'm also a fan of Linux, so I tried to boot the system with a LiveCD of my distributions preferred: after loading of the quick menu asking what I want to do (the liveCD boot, installation, diagnose, etc), it restarts... and show me again the quick menu (quick menu is GRUB, kernel functionality has not been loaded right now).

  I understand that 'something' (and I guess it's system restore Toshiba) let me start on something other than the original partition, preventing the upgrade of Windows 10.

  Any idea?

  I was offered the free update on my R700-12U and R930-1DK Toshibas--and did the updates without any problem. However, if I understand it right, the R700 is not on the list of evolutionary units, but it has worked very well on my own, from up-to-date W7.
  concerning
  / Anders

• How to reset the sensor of fingerprint on Portege R700-174?

  Hello!

  my "problem":

  on my portege (r700-174), I run a win7 (which was preinstalled on your laptop), a victory for 8.1. and for some is true the technical preview of win10

  all systems are protected by password and fingerprints.

  also the win10-test system (for test prints digital-utility in win10)

  now, I deleted an old generation of win10 and do a new install with the latest version

  Unfortunately I forgort to cancel the registration of the fingerprint I had entered with this old win10 - so now this finger cannot be used
  to be entered for the new win10 (or any other system)

  My question

  is it possible to reset it completely (clear all the fingerprints for all systems) the fingerprintscanner out of one of my systems running or to cancel the registration of the
  Fingerprints for this system, which does not exist anymore on my portege?

  Thanks for the tips

  Kurt

  The fingerprints are stored on the fingerprint sensor and you will need to follow the instructions of this Toshiba document to remove your scans of fingerprints.
  http://www.MyToshiba.com.au/support/items/FAQ/386

  In the case that this procedure does not work, only the Toshiba certified maintainer would be able to erase fingerprints users digital related privacy information on the fingerprint sensor fingerprint flash.

  See also another thread:
  https://Forum.Toshiba.EU/showthread.php?75917

• Portege R700-S1321 - cannot set the resolution of 1366 x 768

  I have exactly the same problem, as shown in:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64809

  The resolution of the laptop to random times and intervals seems to support a maximum of 1280 x 700, which translates into a 2 inch black bar on the right side and the button start Windows 7 off the screen.

  Currently its stuck in the resolution of the screen and no matter what I may not make it back to normal 1366 x 768.

  External monitors very well with the laptop work.

  Its 2.20 BIOS execution that seems to me later.

  It seems that the intel driver must get some information that is incorrect.
  Research on different forums and using moninfo, I see that the internal display does not support EDID and settings appear to be set by the registry somehow.

  I also tried to make an EDID override by creating an inf file that is customized with Moninfo, but appears not to the question of the effect.

  I also tried to restore from the recovery many times discs without success.
  During the installation of windows occurs, the screen is fine.
  When Toshiba additional programs are added to the screen returns to the 1280 x 700.
  I suspect that what happens when the graphics driver intel is installed.

  If I boot the laptop in safe mode resolution is 1366 x 768, which seems to suggest that it is the driver who has a problem.

  Anyone else had this issue and understand how to fix it? I see also that intel do not support EDID override.

  Any idea is appreciated. Thank you.

  > If I boot the laptop in safe mode resolution is 1366 x 768, which seems to suggest that it is the driver who has a problem.

  I think you are on the right track, and I think that his untimely pilot.
  That's why I recommend you to uninstall the Intel graphics driver in Device Manager.

  PORTEGE R700-S1321 was equipped with the Intel® Core i5 - 520 M processor and this processor supports the Intel® HD graphics card

  The latest Intel HD driver can be downloaded directly from the page of Intel:
  [Driver for Intel Core with Intel HD Graphics processors | https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Graphics& ProductLine = graphic + portable + pilots & ProductProduct = Intel % C2% AE + Core E2% 84% A2 + processors + with + Intel % 2 C % AE + HD + Graphics & ProdId = 3231 & LineId 1101 = & FamilyId = 39]

  I need to download the zip package.
  Then you can install the driver through Device Manager by using the Advanced installation procedure. This allows you to link directly to this zip package. Windows system would automatically take the driver. After restarting again you that would have settled the last drivers and you should change your resolution.