Portege R700-19 t - new RAM-> start is no longer

Similar Questions

• Portege R700 - change order of remote start

  Hi all

  Is it possible to change a Toshiba Portege R700 BIOS remotely? -Specifically to change the boot order to a PXE boot (instead of HARD drive).

  I intend to deploy images on our laptops using SCCM 2007 but it takes a utility to change the BIOS settings. HP and Dell, both allow you to do so, as Toshiba?

  Thanks in advance

  Hey,.

  As I know that it is not possible to change the BIOS settings remotley s but what you can do is to use a Windows remote connection or another remote control based on Windows of the program and then use the preinstalled Toshiba HWsetup tool. Tool for configuring the BIOS, where you can change the boot order and other options based on this Windows s BIOS.

  It should work! :)

• Satellite L30 10Y does not start with the new RAM modules

  Hello
  regged just with this forum I have a problem to upgrade memory.

  I read through a few problems of memory here and all users that it is a problem of memory comaptible. I got Hynix 512 MB RAM in my laptop and I bought 2 x 1 GB memory Hynix these two are match sticks to the installed memory, but when I installed my laptop wouldn't boot at all. It would only boot if I had a stick in both.

  I tried to switch ports top and btm and even when a stick was installed it says in XP, Vista and Windows 7 (yes I tried all systems) 896 MB of available space. I even tried to use my other Hynix stick, but he won't start and showed more stick of 1 GB (896 MB usable in Windows 7). After reading all the threads I wonder if it is a hardware failure or is there a fix in the world of Toshiba or perhaps in the world of Toshiba, the L series is almost obsolete and not worth to help people who unwittingly bought their goods.

  I apologize for being slightly down on Toshiba but a laptop that shows what he can work and is not a company should hold his hand up and say that Yes, there is a fault and help deal with the problem.

  You see 896 MB, because the rest is reserved for VRAM for graphics card.

  Sometimes RAM may simply be incompatible, because of incompatibilities of calendar or RAM chip/controller design differences.

  What speed and timings is your original RAM?
  PCxxxx / DDRxxx =
  Schedules CASES/RAS =.

  What speed and timings is your new RAM?
  PCxxxx / DDRxxx =
  Schedules CASES/RAS =.

  You can display this information using a utility called CPU - Z
  http://www.CPUID.com/cpuz.php

• Failed to start process after inserting the new RAM. PC3200 1 GB 512 MB.

  I've just switched to new RAM from 1 GB to one of the slots on my desk. It goes through the boot process (showing the IDE controllers and etc.), but the screen is blank when I'm looking for the Windows XP login screen. I restarted my time, even trying to start in "safe mode". But NO luck. Help!

  1. Windows XP should consider in a Windows XP forum, as this forum supports Vista you may get advice that applies to your operating system.

  2. that said, is the system startup if you put memory old back in?  That would mean that the new memory is faulty or not compatible with your system.

  writing in the new message: * e-mail address is removed from the privacy... *

  I've just switched to new RAM from 1 GB to one of the slots on my desk. It goes through the boot process (showing the IDE controllers and etc.), but the screen is blank when I'm looking for the Windows XP login screen. I restarted my time, even trying to start in "safe mode". But NO luck. Help!

• Cannot use 8 GB in Portege R700

  Hello

  I had 2 x 2 GB PC3 10600 ram in my R700 (i3) running Windows 7 x 64.

  I have a few sticks of 4 GB of ram, I wanted to update my laptop 8 GB total.

  I put in the memory which consists of:
  1 x 4 GB PC3 12800
  1 x 4 GB PC3 10600

  The laptop comes on the screen where it says "Starting Windows" and looks like it freezes before windows animation.

  If I try to use 1 x 4 GB (two speeds) and 1 x 2 GB, then Windows starts fine, but there is a problem when I use both the 4 GB sticks.

  I tested the ram with Memtest and they pass the tests.

  If I put the bars of 4 GB of RAM in a R840 (Windows 8.1 Pro), it starts very well.
  If I put the bars of 4 GB of RAM in a R700 (i5 running Windows 8.1 Pro), this also starts very well.

  If I try to put in the sticks of 2 x 4 GB of ram in the R700 i3 and trying to install Windows 7 or Windows 8.1 then happens to the screen that says "Windows is loading files" and the progress bar ends but then the screen goes all white and the fan runs but nothing else happens.

  I have 8 GB of ram in the R700 i3, so I don't know that it supports. The BIOS detects it has 8 GB of ram when I inserted them and the BIOS is updated to the latest version which is 2.20 iirc.

  Anyone can shed light on the problem?

  Hi Borito

  If the specification states that your model of laptop can handle with 8 GB of RAM, that we should not discuss this topic.
  By RAM upgrade is important to use 100% compatible and two modules of identical RAM (same specifications).
  I tested it on my machine using too much standard and a cheap RAM and my machine was dead. With two modules of identical RAM, everything is OK.

  Can you please send the name of the exact model of your laptop Portege (R700-xxx) and I'll try to find the exact reference for 4 GB of RAM for this model of laptop.

• Portege R700 - quick as lightning!

  Despite some reports of 'flaky' and similar operation, I decided to tear off my HARD drive and slap a SSD and W7 Pro 64 bit on my portege R700-184

  flippin heck its the thing to the top fast!

  I used a base of sandforce OCZ Vertex 2 120 GB drive and the Retail Media to install the 64-bit windows. It's with any other firmware or software update for the SSD or Laptop, so right on the box

  Before starting from cold to 95 seconds, down to 23 seconds on the SSD used! and he wakes up from his sleep in 4 seconds! VERY impressed!

  Similarly the 64-bit operating system has improved my WEI scores the CPU is 6.5 to 6.9, the RAM of 5.4 to 5.9 and obviously the SSD took a hard drive of 5.9 to a burning 7.4 :-)

  excellent upgrade in the embryonic stages, I will present long-term stable after that I have all my drivers and running upward and restore my files!

  Ben

  Post edited by: 1994F7PT

  > I decided to rip off my HARD drive and hit a SSD and W7 Pro 64 bit on my Portege R700-184

  I have improved ever one of my laptops with an SSD, but according to your post, this should improve the performance of cell phone lot to known this thanks for sharing this info!

• Portege R700 - external DVD Player compatibility

  I have a problem with a Samsung external super-multi drive 2 year with my new Portege R700-1F3, which does not come with a DVD player. The USB powered Samsung dvd player works fine with all other computers that I have access to:
  * MacBook with OS X 10.5
  * Samsung NP - X 360 laptop computer with Windows XP 32-bit
  * Dell Inspiron Zino HD computer desktop with Windows 7 64 bit

  The symptoms are:
  * When the dvd player is plugged in Portege, the green light on the dvd player goes on and out.
  * This happens in the BIOS, and once that Windows 7 32-bit support.
  * In Control Panel Windows 7 devices & printers, the DVD alternately appear & disappear constantly.
  * When it appears, it shows up as "USB storage device" with a yellow! warning icon.

  I tried all 3 USB ports. The power cable is plugged Portege. I tried the turn of the digital signature when starting upwards. The external dvd came free with my old laptop from Samsung and is the model AA-ES0N09B.

  Any suggestion that this is a hardware or software problem and how to fix it?

  Thank you
  Lola

  Hi Lola,.

  Have you tried other USB devices on your Portege R700 if they work properly?

  If peripheral USB do some problems I would try to remove the USB ports from the Device Manager (right click > uninstall) and restart your computer. After that, the USB ports will be recognized again and you are able to use them.

  If it doesn t help I would try a driver update from the official website of Toshiba chipset. http://EU.computers.Toshiba-Europe.com/

• Portege R700 - SSD devrais I buy?

  Hi I'm new to the forum and I was wondering if people can give me advice on what disk hard solid state to buy for my laptop Toshiba Portege R700?

  I heard that a number of readers can give problems Starter such as some Ocz and Corsair models.

  Ideally I'm looking around 256 GB of storage space; any advice would be greatly appreciated.

  Thanks a lot :)

  Hello

  You can buy any SSD drive that supports the SATA interface.
  It is possible that you need to update the firmware, but this should be verified with the manufacturer of SSDS

• Portege R700, Windows 7, mounted sudden fan/cpu, freeze and force stop

  Hello

  I have a persistent problem that starts to become annoying... Portege 700 running Windows 7. Normal use (office, WMP, IE anything heavy)

  No apparent reason (no new requests started for example), there is a sudden increase in the speed of the fan which should be max (looks it takes off) and I suspect use of the processor at the same time. And it's that it's not simply to stop (I left for awhile on occasion) and does not match an input (keyboard or mouse). The only 'solution' is to use the power button to force a shutdown. (And then I lose all cookies etc. when starting again).

  I did a lot of Googling on that. Thought it was WMP network sharing Service and has taken measures to see, but have recently disabled that service and still the problem occurs... (I checked that it is always disabled when just rebooted).

  I keep as 'clean' as I can (have AV installed, use ccleaner regularly etc etc) so would be surprised if a virus/worm, but am running a scan again just in case...

  This happens quite often be a pain - and I have no idea what is the cause, if any ideas gratefully received.

  Thanks in advance.

  Tim

  Hello

  I m no owner on the site Web of Toshiba Portege R700 but I found an article that describes EXACTLTY the same problem. High activity of its use and CPU fan, then it freezes :(
  Here is the link to this article:
  http://APS2.toshiba-tro.de/KB0/TSB0C032L0000R01.htm

  As you can see, update the fingerprint software could help get rid you of this problem. :)

• Portege R700 internal to screen very dark but can use the external monitor

  Hi guys,.

  just had a question about my Toshiba Portege R700 as the screen went white and I couldn't see the screen or sometimes I could and it was very dark!

  However, the laptop could start up as normal and I could use it normally through an external display!

  Subsequently, I replaced the screen and it started working again (happy days)!
  However, a few weeks down the line the same problem again apparently did screen dies.

  I take off again and disconnect and reconnect the screen just to see if that would solve the problem and he did, back and working again. I even tried the old screen I swapped and that works too!
  So I paid £140 + for a new screen that I didn't need, my question is what is the problem?

  Could not find anything else on this topic so would appreciate any help thanks

  Ross

  Hello

  It is difficult to say what might be wrong here usually black screen can be related to a faulty FL inverter.
  But laptop computer s display supports a backlight Led FL inverter should not be a problem here
  Maybe some loose contacts caused this

• Portege R700-17Z - upgrade to Windows 7 64 bit

  Hello

  I currently have a Toshiba Portege R700-17Z.

  I want to increase the amount of RAM from 2 GB to 8 GB, and therefore I want to run 64-bit Windows. I was planning on running a clean reinstall, but 64-bit Windows built into this machine? Or I need a disk full?

  If I need a drive in its own right, any ideas on how to do it without an optical drive?

  Thank you very much!

  The first news on RAM upgrade: you're right. You can upgrade your Portege up to 8 GB and 4 GB compatible modules have part number PA3677U-1M4G.

  According to the specifications of the laptop your Portege shipped with WIN7 32 BIT PROFESSIONAL, but it is supported for Win7 64 bit. 64-bit drivers and tools specific to Toshiba and utility can be downloaded from the Toshiba download page.

  Now what is your decision? If you need assistance with installing the OS let us know.

• New RAM not working not not on iMac 2010

  Hello

  I have a 21.5 ' mid year 2010 i3 iMac, and, after all this time, it was time to upgrade the RAM.

  I bought 2 x 4 GB Patriot SODIMM PC3 - 10600 1333 MHz 204-pin, by following the instructions in the Web page of Apple memory upgrade (install memory in an iMac - Apple Support).: 4 GB RAM SO-DIMM memory DDR3 SDRAM 1333 MHz. I installed it according to job with factory 2x2gb RAM Samsung sticks. After a reboot, everything worked beautifully for about 6 minutes. The identified computer sticks again and showed me a full 12 GB available. Which was great, since Yosemite + a few browser windows and Spotify only lasts up to 3GB. I have enough to spare. However, it restarted and again and again and again.

  I decided to test only the new RAM and started with the combination of Patriot 8 GB. It froze on reboot and fully started once, but it restarted less than 2 minutes later.

  Result: now I'm back to the original combination of 2x2gb. Always deal with the lack of memory and without understanding what's wrong with the new RAM I bought at Fry's. What about compatibility? Is there an another specification? Of course, I know, there may be a malfunction of hardware, but I would like to address this issue before making another run to the store and risking another model or brand.

  For reference: I've tried it before, but because of the lack of information from the seller, I was conquered by a stick of RAM 1x8GB, which is not supported by my model. So I replaced it with the 2 in question.

  Thanks for any help.

  It is generally recommended to stick with quality RAM to buy from a seller that tests and ensures their RAM to work with Macs - the two most recommended are OWC (macsales.com) and Crucial. They both offer helps you determine which RAM you need and offer the lifetime warranty.

  http://eShop.MacSales.com/shop/memory/iMac/2010/DDR3_21.5_27

  That should be your - sure.

  I'll be back on the RAM for a refund.

• Portege R700 - cannot activate the top modem mobile broadband

  Hi all!
  I have a big problem with my Portege R700 with Broadband Modem built-in.

  I installed the laptop with the Original CD recovery with Win 7-64 bit - all works well but if I press FN - F8 I only activated wireless and Bluetooth but noch Mobile Internet Modem Mobile Broadband is not displayed in the hardware Manager.

  Where the new driver for FN Options?
  How is the correct name of this option?

  I tried to install all the drivers I found here: https://aps.toshiba-tro.de/wlan/?page=3gdownloads

  None of them worked! I did a clean install, once again - no modem, indicated in the hardware Manager.
  He worked perfectly but after the installation of the new 2 weeks no chance.

  * Issues: *.
  *.) don't see a modem mobile broadband in hardwaremanger *.
  *.) FN F8 show no option to activate the modem

  Help me please - it is an urgent problem because I need this laptop for businesses. :(
  KR
  Philipp

  > do not see the modem mobile broadband in the hardware Manager

  The question is: did you buy a Portege R700 with a module 3G?

  I m asking because different Portege R700 were released with different specifications.

• Portege R700 - impossible to pass to Windows 10

  I have a Portege r700 with original Windows 7 OEM installation.

  Windows 7 is updated and program update Windows upgrade me to Windows 10 offer.

  The upgrade process begins very well, download & pre-configures all the stuff, and then finally ask me to reboot the system to continue with the upgrade.

  After a few seconds, the restart process is launched and load... the current Windows 7 system, saying that there was an error during the upgrade process.

  I did some tests; I'm also a fan of Linux, so I tried to boot the system with a LiveCD of my distributions preferred: after loading of the quick menu asking what I want to do (the liveCD boot, installation, diagnose, etc), it restarts... and show me again the quick menu (quick menu is GRUB, kernel functionality has not been loaded right now).

  I understand that 'something' (and I guess it's system restore Toshiba) let me start on something other than the original partition, preventing the upgrade of Windows 10.

  Any idea?

  I was offered the free update on my R700-12U and R930-1DK Toshibas--and did the updates without any problem. However, if I understand it right, the R700 is not on the list of evolutionary units, but it has worked very well on my own, from up-to-date W7.
  concerning
  / Anders

• How to reset the sensor of fingerprint on Portege R700-174?

  Hello!

  my "problem":

  on my portege (r700-174), I run a win7 (which was preinstalled on your laptop), a victory for 8.1. and for some is true the technical preview of win10

  all systems are protected by password and fingerprints.

  also the win10-test system (for test prints digital-utility in win10)

  now, I deleted an old generation of win10 and do a new install with the latest version

  Unfortunately I forgort to cancel the registration of the fingerprint I had entered with this old win10 - so now this finger cannot be used
  to be entered for the new win10 (or any other system)

  My question

  is it possible to reset it completely (clear all the fingerprints for all systems) the fingerprintscanner out of one of my systems running or to cancel the registration of the
  Fingerprints for this system, which does not exist anymore on my portege?

  Thanks for the tips

  Kurt

  The fingerprints are stored on the fingerprint sensor and you will need to follow the instructions of this Toshiba document to remove your scans of fingerprints.
  http://www.MyToshiba.com.au/support/items/FAQ/386

  In the case that this procedure does not work, only the Toshiba certified maintainer would be able to erase fingerprints users digital related privacy information on the fingerprint sensor fingerprint flash.

  See also another thread:
  https://Forum.Toshiba.EU/showthread.php?75917