Portege Z10t-A140 - battery and BIOS update question

Similar Questions

• Portege Z10T-A140: can I make to Win 8.1 and where to find the serial key

  Hello
  I have Z10T-A140.

  When I check the part number in the link: http://www.toshibamea.com/en/Compatibility-Matrix-8-1?SerialNo=pt131v-00h005ar

  told me is not compatible with win 8.1.

  but to under writing the page, it is compatible with win 8.1.

  Why the result is different?

  Another question:
  I can't have my serial number of Windows 8 and I can only see last 5 digit number.
  If my clear HARD drive and I need full new install winodws 8, where can I find my serial number for Windows 8.1?

  Thank you.

  > Why the result is different?

  Your laptop is a PT131V-00H005AR Portege Z10T-A140
  Of course, it s 8.1 Windows extensible and taken in charge.
  On the page of supported Windows update 8.1 models, you can find the Portege Z10T PT131V.

  > Other my question:
  > I can't get my serial number of Windows 8 and I can only see last 5 digit number.
  > If my clear HARD drive and I need full new install windows 8, where can I find my serial number for Windows 8.1?

  I recommend reading the user manual. You will find information on the Toshiba Recovery Media Creator.
  The recovery media Creator allows you to create a recovery disk. This disc install again the image of Toshiba on the laptop. The serial key is not necessary because the Windows 8 will be activated automatically using Toshiba image.

• Portege M800 no boot after BIOS update

  Hello

  I encountered some problems with my netbook (Portege M800-10W) after the BIOS update.
  The update of the BIOS program appears failed. Then my Netbook automatically rebooted and now I can't start my PC more.
  All the LEDs will light up but the screen remains black and after a few minutes, the beep 3 times (1 long, 2 cm) netbook.

  How do I restore the BIOS to the previous version (or plant)?

  Thank you.

  Adrien

  null

  Hi Adrien

  I think that Akuma is right. Your laptop must be verified by the service of Toshiba s. Let check your laptop and I hope they will help you with this.

• Configuration at the request of update Retriever to download only the drivers and BIOS update?

  I'm looking to automate the update of extractor and our organization doesn't want or need additional software such as SHAREit or WRITEit, just the drivers and BIOS update. Is it possible to retrieve only the BIOS and the driver for the repository updates?

  Thank you

  At one point AHA a little there, discovered that I can mark the drivers/software I want installed as test or hidden mode and ThinInstaller don't provide that updates available, which works very well for us.

  Thank you

• Portege Z810 and BIOS update 1.80

  What the BIOS for Portege Z830 update (PT224 / PT225 / PT22L), version 1.80 do?

  The description says fair + "This BIOS update adds functionality to your system." +, and I couldn't find anything about this website more Toshiba on. The update has been published on 24-05 - 2013.

  I assume that Z810 Portege European must be like us Z830/Z835 (PT224x/PT225x) so I ve checked the page American support for the update of the BIOS and here's the info on the BIOS updates:

  + Version 1.80 - 2013-04-25 +.
  + Optimized a BIOS setting to improve the reliability of hibernation RESUME. +

  + Version 1.70 - 2012-09-12 +.
  + Implemented the Intel specification for stability - put MEBX up-to-date at 7.0.0.0063. +.
  + V1.30 EC/KBC: ensures better stability. +
  + V1.30 EC/KBC: changed the method of detection of power supply error. +

  + Version 1.50 - 2012-02-13 +.
  + Add a boot LOGO sequence for ZAT (GPS) models. +
  + Improved: Control of the TPM on Intel TXT module enabled systems. +
  + Implemented a fix for a problem where the BIOS password can be entered when it is configured as follows: 1. wired USB keyboard is connected to the port replicator. Wireless USB mouse is connected to a USB port on the computer. 3. computer is docked in the duplicator. +
  + Implemented a fix for a problem where the BIOS password can be entered with some USB keyboards. +

  + Version 1.40 - 2011-11-15 +.
  + Improved: The TPM on Intel TXT control enabled systems. +

  + Version 1.30 - 2011-10-27 +.
  + Initial production BIOS for these models. +

  I hope this will help you.

• Portege Z10T-A140: Toshiba Health Monitor shows bad battery

  Hello

  near 1 week old I am a Z10T-A140 ultrabook.
  Then I active Toshiba Health Monitor and can view HARD drive status.

  But to see the battery, it's bad!
  Why my battery see the poor?

  Thank you.

  Hello

  It is not unusual for new batteries.
  You know that batteries must be calibrated first to achieve the best performance.

  Calibration means that the battery must be fully charged and discharged and then until it s completely empty. This procedure should be repeated several times in the line. After that, you can check the status of the battery provided by new health monitor

• Tablet and Portege Z10T-A140 - different serial numbers - dock

  Hello

  I bought 2 pieces Z10T-A140.
  Then I opened the package include the serial numbers on the packages is different with serial number on the docks.

  Thank you.

  and where is the problem?

  The two parties (dock & tablet) are separate devices and so each party has obtained different serial number.

• Portege Z835 - need help with BIOS update

  Hello.

  I have a Portege Z835, with a battery problem: do not load. The battery indicator says "3% connected load" but it doesn't load the battery.

  Some forums said that the solution is updating the Bios. I have a Bios Update v.1.60 ready to install. When I try to install, we get the message "the battery power is not enough.

  My power cord is still connected. If I unplug the power cord, the laptop is turned off.

  Please, what can I do?

  Thank you.

  F.

  To be honest I don't think it's the related issue of the BIOS. AFAIK battery must be charged, even if the laptop is turned OFF so why BIOS update if the battery can not be charged at all.

  To me that sounds like hardware related issue.

  How old is your Portege?
  Warranty is still valid?

  Maybe you should contact Toshiba service and ask for help or even their opinion.

• Satellite L40 PSL48L: No noise and Bios Update after installing XP

  Hai guys

  I have a toshiba laptop psl48l-0200u and lowered the score on XP Professional, but realtek audio does not work.
  At the launch of the facility, there is an error message "realtek audio installation failed.

  I think that this may have to do something with bios - then I downloaded Bios for XP and extracted into a folder - but the update of the bios.

  Help, please
  Thank you

  What to first say if you installed XP on your laptop, then you should also update the BIOS to the version of Win XP.
  The BIOS update must be performed on Windows XP!
  Simply run the exe file and follow the instructions on the screen.

  Regarding the sound issue.
  Well this problem is not related to the BIOS, but you have not installed the XP patches!

  Have you checked this forum for a similar question? I don t think so.
  I found this example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=59&ThreadId=25916

  or this

  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

  As you can see, you need fixes KB888111 and KB835221

  Good bye

• BIOS update question

  Hi, I recently got a ThinkCentre M52 8113-E7U TC series

  My question is about the BIOS update.

  If I update to the latest version, this is includes all fixes from previous versions?

  I noticed, that I can not boot from USB more than flash drives 2 GB, I see it as a fix in an update of the earlier BIOS, so if I update to the latest version of BIOS will it also include this fix?

  Thank you

  Rick

  Hello and welcome,

  The BIOS updates are cumulative and include previous fixes and improvements.

  Z.

• CPU and BIOS update problem

  I have a M57P 6395 33 M system and some time ago I added an E8500 CPU, I thought it would work even if Lenovo not listed the E8200, E8400. I was a little disappointed and I still wonder WHY lenovo gets SO specific with CPU connection. I don't see why she accepts only 2 CPUs and no other?

  Well, I bit the bullet and found an E8400 to put in the machine. I added CPU, removed the MB battery and left out for a while then went back on the new shoe, set all the necessary info. The first part of the BIOS screen mentions that there lies an E8400 (as he did for the E8500) but when it goes through the boot process it is said AGAIN that the CPU code is not enough to recognize the E8400. I am now confused.

  When I updated the BIOS, I used the that I've been led to believe was the GOOD .54KT23AUS (through the windows), but I still get the error 0167. It would be better for me to put the back E8200, re run the BIOS update using a CD?

  and there is another update of BIOS listed for the M57P 2RKT64A, I wonder if it would be better? It is not for use on 6395 but, the FIRST thing listed for THIS update is an update of firmware of CPU.

  I know that this means not much to all the world and I hear people say 'why bother? ' but I would use the machine as I'm n ot offer a more recent machine as I am a pensioner.

  A little help please.

  Thanks a lot for the quick response. I tried Flash via the CD with the E8400 in and it would not allow me to do when he came up with the error of CPU to half way through. I have since updated the E8200 back and did the BIOS update through the CD. The machine seems to have taken the update of the better BIOS this time but, the E8400 still does not work

  As for the E8400 CPU, I have an Intel CPU program on the computer and deepening classified by it for the E8400 says it's A07? However, I can't find any info on it. I guess I either will set up with hitting the F2 key when I start with the E8400 inside or just keep the E8200.

  I finnd the info on these rather confusing processors. The Intel CPU app I have gives me different information from a site like CPU world. The TDP of the processors are 65W but the ONLY thing I see different is the deepening of the base. The E8200 is listed as C0, while the E8400/8500 are E0. Why who would have much effect on the use of the more major? You would have thought that Lenovo engineers could make the system accepts the E0 revision or what is Lenovo wants to sell a new machine?

  Like I said, it's a shame that Lenovo is so affected by these machines with tunnel vision. Well

• Equium M40x-189 and BIOS update

  There are updates of bios for my laptop, and so I thought I would try a flash update. I can only find the Trad version and not the flash version of Win.
  the problem is that the traditional flash update file asks you to create a bootable cd for the update procedure. Software CD, Toshiba in their wisdom have provided a cutting of the version of "save now". Guess what this special version of toshiba cannot create a bootable cd you have to spend £25 for the full version.
  Someone knows, there is a version of the flash upgrade Win

  Hello Andy

  As far as I know just BIOS updates listed on the download from Toshiba site are available. I guess that your unit is a relatively new. If you have any problems with this device do not do any BIOS update. Only if there is a problem the update of the BIOS by using external devices or something like that is recommended.

  Good bye

• Compaq dc7800: DC7800 CPu id and BIOS update probem

  Hello

  My first post here, I hope you get what I'm trying to say.

  Well, I have this old compaq dc7800 sff and I managed to level it's OS to Windows 10.

  And now, I would like to update its bios and CPU id, but I can't run those exe, I downloaded on the cd7800 support site.

  I know that these bios update programs and so forth are not published for Windows 10, but I thought that windows7 versions would work.

  But they did not.

  For some reason, I got the the messege that "software publisher has refused to run this program on this computer.

  While this mean?

  I can't run these programs even with administrator privileges, I get the same messages?

  Because of Windows 10? Or what?

  The reason why I came across this problem was that I tried to update the CPU of the Q6600 to Q9550 and I got the error of CPU - ID firmware.

  Hello:

  It is very easy to update the BIOS on a dc7800 without being under Windows.

  In the menu of the BIOS on the file tab, there is a rom flash system command.

  All you have to do is put the BIOS files on a USB stick formatted with the FAT32 file system.

  Rather than go though all the steps to get the BIOS files, I've zipped or less than joint under attachments.

  Unzip them and copy the content of the file of the folder (not the folder), for your USB flash drive.

  Plug the flash drive into your PC and restart it, tap the F10 key to access the bios, select the file menu and on this list will be a rom flash system command.

  What to choose, and the PC will 'see' the files on the flash drive.  Follow the instructions on the screen to Flash the BIOS.

  I have attached files to the latest revision of the BIOS (1.32 Rev. A (6 Dec 2011)).

  If you still get the microcode error after updated the BIOS with the latest version, let me know, because then update the firmware, and it is a much more complex process.

• Satellite U300 maximum PSU30E of expandable RAM and Bios Update

  What is the maximum expandable ram for the U300? The last update of the bios will allow two sticks of 4 GB of ram for a total of 8 GB?

  Only, I ask this because there is no history of clear version with the Bios Toshiba updates.

  I appreciate all the advice, thanks in advance.

  Hi Bob

  I'll try to help. Let's go:
  > What is the maximum expandable ram for the U300?
  Satellite U300 with model number PSU30E-xxxxxx can handle with 4 GB RAM max.
  > The last update of the bios will allow two sticks of 4 GB of ram for a total of 8 GB?
  N ° BIOS update has nothing to do with it. There is limitation chipset.

  If you have any other questions let us know.

  Good bye

• Battery and general order questions for the MacBook Pro 13 inch retina (2015)

  I just bought a MacBook Pro of the retina (100% Brand new) as my first product Mac and I love it! I want to keep this laptop for as long as I can especially for the price I paid for it. Battery is my number one concern, and I want to keep the health of the battery as healthy as possible.

  On a daily basis, I tape regularly documents, surf the web, watch YouTube, movies and videos, and non-intensive games like Flash games.

  Here are my questions:

  If accidentally you unplug the charger and plug it back immediately, this indictment as a load sprays? What defines a cycle?

  Is it safe to use your laptop while he's in charge?

  What are some tips to keep the battery a longer period for general use?

  What are some tips for maintaining the health of the battery?

  Why is it important to calibrate the battery each time in awhile? How can I do?

  What are things which reduce the wear of the battery and how to avoid them?

  What applications are useful to monitor and maintain the battery?

  What are your thoughts on getting a replacement battery for Apple laptops?

  What are your personal recommendations on set make the laptop last as long as possible?

  Thank you very much for the help!

  Answers to most questions can be found here.

  https://support.Apple.com/en-us/HT204054

  Modern battery of Macbook didn't need to be calibrated.

  You can use your Mac while being charged.

  I use app battery of nuts of coconut, but not necessary.

  Best.