Ports in firewall for VMware Converter 3.0.3
Hello
We have ESX 3.5 Update 2 and we use VMware Converter 3.0.3
What firewall ports must be open on the firewall of ESX for this converter?
Hello
Look here http://www.vmware.com/pdf/VMware_Converter_manual.pdf on page 20.
MCP, VCP
Tags: VMware
Similar Questions
-
Which TCP port is used for VMWare Infrastructure Client?
Hello, my ESXi server sits on the private network, and I'm trying to PAT so that I can access the external network using VMWare Infrastructure Client Server. Does anyone know what port is VMWare Infrastructure Client listen? Thank you.
Priscilla
Do the external network for VMware NAT
I guess you mean that your server is located in the internal network and Client is on the outside.
If the customer does not have to "listen" for connections it opens TCP ports - HI 1024-65535 to servers as follows.
Servers (including GSX) TCP ports: 8222, 8333, 902
If you have ESX (i) then TCP ports: 80, 443, 902
T:OMI
Psalm Points, please
-
What NAT ports in the firewall for VMware View Server Security?
We have a Cisco ASA and I wonder what are the ports I need NAT from the outside to the Security Server? I'm assuming that port 443, but don't know if this is correct or if maybe other ports must be open.
Thank you!
Brian
This KB should help you, http://kb.vmware.com/kb/1027217.
-
Suggestions for VMware Converter running on internet
Hi everyone, I'm looking for a bit of advice
Currently using VMware Workstation 9 and things go a lot, I P2V had a couple of local machines on the network using the VMware vCenter Converter Standalone Client (5.1) and had no problems at all.
What I am looking to do now however turns out to be somewhat difficult.
I have a web/database server located in a data center I want P2V. The server is running Windows 2008 Server R2 edition and I can connect to the server by using remote desktop. I have access to the firewall on the server (it has the default value / built in Windows Firewall) and I have access to the firewall at the office here.
The server is limited to space, two as physical disks:
C: 30 GB (2.7 GB of free space)
D: 16GB (5.1 GB of free space)
The lack of local disk space naturally prevents me from running the P2V and storing the img locally then uploading via FTP or similar.
Therefore, I would ask what are my options...
It would be possible to try to perform the P2V of Office (bandwidth is 30 MB downstream, 3 MB upstream)? If so, what preconditions would be necessary regarding the firewall ports or maybe even of VPN connections?
Any other suggestions on how best to P2V this machine would be welcome
Just a quick update.
Yesterday I installed on the server, I wanted to P2V, then using a client computer local win7 I connected via VPN to the RRAS server (ironically, the customer of Win7 is a virtual machine). With VPN in place, I did a full installation of the stand-alone converter on the host server and the client computer. I then had the server to connect to the Win7 machine and set the P2V process.
9 hours and 58 minutes later it was over and I now the P2V is the machine running here on my computer 9.
It seems that the impossible is indeed possible
-
Ports and Destination for VMware View Client
Hi all
I'm looking for a quick bit of help if possible please...
Environment: VMware View 4.5
Question / Info needed:
Two companies having a bond of trust between data transfer etc. and resources share. We need access to a site through their firewall in the bond of trust to connect to the VMware View VDI Office. Customers using VMware View Client.
The question is, if we get the site to enable port 443 to our broker connection I assume this will not be enough? It must be possible to:
443 to connection broker
32111 (redirect USB) to?
9427 (multimedia redirection) to?
4172 (PCoIP) to?
3389 (RDP if used) to?
This may all sound a bit novicy but I need to be 100% before you go test.
Thanks in advance.
So using the brokers of the connection in direct mode without any security server. I think that it would look like this.
443 to connection broker
32111 VDI Desktop
9427 multimedia redirection) to?
4172 VDI Desktop
3389 VDI Desktop
-
Documentation for VMWare Converter
Hello
I did it in the past with other companies. However, I was wondering if anyone can point me to a good documentation on the use of P2V Converter. We have physical machines in our current work, which must be converted to virtual machines. I'm looking for solid documentation that may expose all measures to transform them. Thank you.
Hello
You mean like the User Guide?
Which can be found here:
http://www.VMware.com/support/pubs/converter_pubs.html
Hope this helps,
--
Wil
_____________________________________________________
VI Toolkit & scripts wiki at http://www.vi-toolkit.comWriter to the blog www.planetvm.net
Twitter: @wilva
-
Ports in firewall for updates Adobe CC
A number of Mac computers on our network is not able of to connect/download updates from Adobe.
Can anyone provide info on how mac retrieves updates? What is http?
Please refer to the following document: troubleshoot Adobe Creative cloud download, install and update questions
-
List of Ports TCP UDP VMware Converter 4.0.1 P2V DMZ servers?
Can someone list all TCP/UDP ports required to run VMware converter through a firewall? This is so that we can P2V Windows DMZ servers specific to both ESX in our DMZ servers.
How about you use this instead?
VMware vCenter converter required ports
http://KB.VMware.com/kb/1010056/
Kind regards
EvilOne
VMware vExpert 2009
NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.
-
VMware converter 4 support for partitions on dynamic disks
I currently have a server physical windows 2003 which has its system and data partitions defined as dynamic disks (C and D partitions lie on disk 0-dynamic) not well why it's set up this way, it was built just like that.
The goal is to convert this virtual server and I read many forums stating that dynamic disks are not supported for vmware converter, but some cases have succeeded where the target score was a record time-basic-but-now-dynamics.
Is this the case? and if so, what alternatives can be tried to virtualize the server.
Dynamic disks are supported for Windows. The resulting virtual machine will only basic disks in a hot clone.
I would just suggest that you make a clone of hot regular and do a slight reduction in the size of the disc resulting (even if it is 1 MB).
Second, ensure that the system starts out of the c:\ partition and it is marked as a partition active and has a file boot.ini in the root.
Kind regards
Jonathan
B.SC., RHCT, VMware vExpert 2009
NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.
-
Hello
Not sure if this is the right place for this question, but I need to create an image of VM to a Windows NT computer. I was hoping to use the Converter Standalone package, until I realized that it was not compatible with NT. Then I read that an older version (3.0.2) of the converter work with NT, but was crushed to learn that he was no longer available for download. Can anyone offer any suggestions?
Thank you
Glen
glenikins wrote: I checked this and v4.0.1 does support Windows NT (SP6) but only for a machine virtual source, not to a conversion powered physical machine. It's a physical Windows NT machine that I need to convert it to a virtual machine. Do I have any options for this?
Yes, there are always options. The manifest is for VMware converter - 3.0.3 - 89816.exe is no longer available for download on VMware, however, it can be downloaded from elsewhere. Don't say that I recommend that, however, it is an option and if you choose that route then ensure that the SHA1 checksum: 29ed0cc664df0a7caba542ad1d3e18eb3aed4e96
Another option might be to use imaging software to create an image of the pHDD to a vHDD in a virtual machine and then see if the converter can handle the VM image to start correctly and install VMware Tools.
Then the other option is similar to the second option that after imaging P2V start the virtual machine with the appropriate ISO Image and manually inject the necessary Mass Storage Controller and keyboard driver and settings in the Windows registry to enable the virtual machine to start and then install VMware Tools.
-
VMware converter temp directory
I'm sure this has been asked before, but I can't find.
How can we change the directory temp for vmware converter 4?
My eggs files are too large to restore apparently.
Thanks in advance.
Pat
How can we change the directory temp for vmware converter 4?
Change the tmp variable % and Windows %Temp% - it may be enough to do so by the user.
Just curious - why do you not use the egg files?
___________________________________
-
Hello
I'm doing a P2V with vmware converter standalone 5.5
The source is the same machine that hosts the vmware converter 5.5
The operating system is W2003 which acts as a domain controller
VMware converter is launched by the administrator account.
The error that I see on the balls of vmware - converter.worker is:
2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
2014 02-13 T 17: 36:41.155 + 01:00 [warning 04344 'Default'] attention: no attached disks have been detected.
2014 02-13 T 17: 36:41.155 + 01:00 [04344 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
2014 02-13 T 17: 36:41.170 + 01:00 [info 04344 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
2014 02-13 T 17: 36:41.170 + 01:00 [04344 error "Default"] unknown exception when calling VMOMI method queryComputerInfo
2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
2014 02-13 T 17: 36:56.155 + 01:00 [05648 WARNING 'Default'] attention: no attached disks have been detected.
2014 02-13 T 17: 36:56.155 + 01:00 [05648 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
2014 02-13 T 17: 36:56.155 + 01:00 [info 05648 "Default"] scheduled timer cancelled, succeeds StopKeepAliveThis had already happened with another server (also W2003 DC), but the hardware was completely different; Unfortunately, I wasn't able to solve this year here.
Any help or advice would be appreciated, thanks in advance
Thank you for all your help
I finally found the guilty service.
It was pcmonitor monitor/remote control software. Once I stopped it is service vmware converter could get the capacity of the physical drives.
It is rather curious because I made several servers P2V conversions using this software (so far the last one two weeks ago - the difference between that server and this one was that the first was not a domain controller).
Hopefully this thread will help others in the future.
-
VMware Converter Standalone 5.5 does not display a Drop Down Menu for the Type of Destination
Hi people,
I try to use VMware Converter Standalone 5.5 for use with VMware Player and am not able to select the Type of Destination of my choice (I like to choose "VMware workstation" or another VMware virtual machine in the drop-down menu "Select the destination type"). Please see the image below where the combo box is not there at all. Thanks for your help. Hai
This isn't a bug, it is a limitation of the converter. It is stated in the documentation. Converter considers that any machine under tension like physics. It cannot convert powered on Linux machines to hosted (i.e. Workstation/Fusion) destinations.
A solution would be to convert it to ESX and then convert the (from) power off the VM power to the workstation.
HTH
Plamen
-
Where is 'Create a separate record for each volume' past? in VMware-converter - 4.0.1 - 161434 (independent). Option is not more than 4 converter?
Hello.
When you get to the third tab called "View/Edit Options", choose the Edit option for 'Data to copy.' Then choose the option advanced at the end of the menu "data copy type" and then use the options on the page layout tab target to assign separate discs.
Good luck!
-
is not cold p2v windows 2000 for ESX 3.5.4 with vmware converter 4.0.2U3
Hello
I met a problem today, with the cold p2v windows 2000 sp4 server
stop process to 2% saying unknown error occurred
Here is the log of error-content (agent):
NfcNetTcpRead: the time-out waiting for data
NfcFssrvrRecv: failed with code = 9
NfcFssrvr_DiskIo: have not received response from e/s
DISKLIB-LIB: RWv failed ioId: #69 (5666) (34).
DiskLib_Write has no sector 40960 HA - nfc: / / [Local_Storage_
1_elcvmw02] vlzwwc02 / [email protected]:902! 52 98 d dd 00 99 72 6 b4-66 82 23 be cc 20 31 f1 with error invalid NDB error code.
NfcNetTcpWrite: bwritten:-err 1: 10053
NfcFssrvr_Close: failed to send a close message
NfcNetTcpWrite: bwritten:-err 1: 10053
NfcNet_Send: asked to 264, only 8 bytes sent
BlockLevelCloning::task: Image Processing task a ISP
LED with MethodFault::Exception: sysimage.fault.DiskLibConnectionFault
BTW: I tried several ESXs target and I also tried a migration cold with vmware converter 3.0.x
No idea what is the problem?
Thanks for your help guys
Best practices for using and troubleshooting VMware Converter
* If you found this information useful, please consider awarding points for
"Correct" or "useful."
Maybe you are looking for
-
Hello my MacBook Pro model (MacBook Pro (15 inch, early 2011 am Dubai bought the Sryalsh C02FD2CPDF8 number and I am in Iran that MacBook Pro not enter the device screen when I turned on the pink vertical lines can be seen, the problem is agitated an
-
Laptop HP flow 11-R014WM: my HP laptop will not light
When I turn on my laptop (laptop) the power button just flashes. The screen won't come at all. My father and I have tried to remove the battery, but we couldn't do this in broad back. Can someone help me please? I have need for this coming school yea
-
My deskjet d1455 printer only prints one line at a time, every 30 seconds
How can I fix?
-
How can I disable game mode in windows 7 for my Kaspersky anti-virus update
When I try to update my anti-virus Kaspersky 2016 he won't make any difference. It says that the game mode is activated, I never turned it on and it seems that when I try to do something with Kaspersky it just turns and turns but never does anything.
-
Custom MessageArguments?
Hello I'm doing something like function "tell a friend". The user can click the button and a screen to email new message will appear. By using very basic code like this Invoke.invokeApplication(Invoke.APP_TYPE_MESSAGES, new MessageArguments(MessageAr