My deskjet d1455 printer only prints one line at a time, every 30 seconds

Similar Questions

• HP deskjet 5150 does only print one line at a time

  My deskjet 5150 worked very well until another paper went through and stuck.  I was able to pull the tail of the outside before he completely crossed, thus eliminating the document.  After that, the printer went from normal to print to print one line at a time, with long breaks between the two, such that a journal would take several minutes to print.

  It happened before, and it seems that one of the many random things that I try finally works (striking out the cartridges, etc.), or he decides to forms and works correctly at some point anyway.  I don't know what is the actual active ingredient.  However, it has recovered from such behaviour several times before.

  I should mention that this malfunction/recovery routine began and most recently occurred when connected to my old iBook G4 Mac computer.  I have just this week has changed to a MacBook Pro, the latest operating system running, and the printer is not different.  It prints one line at a time.

  I don't know when this has happened to the other HP printers that I had in the past, I just put away, not realizing that they still had plenty of life in them left.  This one, I have "revived" several times already.  But how, I'm not sure!

  You have any ideas?

  Hi there chitownchic,

  I suggest paper paper jam for the troubleshooting steps that are recommended for the jamming problem you had. Generally a very good cleaning of the rollers will help a little, and also a power reset.

  "Paper jam" Error Message on the computer

  I hope that helps!

  Have a great day, thanks for posting in the community

• My deskjet 3522 print horizontal lines with no printing on the lines

  My deskjet 3522 print horizontal lines with no printing on the lines

  I solved prolem with horizontal lines with no printing on the printer cleaning lines and lining up and will leave no paper in the tray to dust cllect

• Can I install Acrobat Pro DC on two computers with one subscription? I have my mac for the trip, but a PC for my office. I only use one device at a time - don't want to buy two subscriptions. Thank you

  Can I install Acrobat Pro DC on two computers with one subscription? I have my mac for the trip, but a PC for my office. I only use one device at a time - don't want to buy two subscriptions. Thank you

  Yes, your license allows this.

• printer started printing slow (one line at a time all the settings seem to be right

  My hp1200 worked OK started what seems like printing a single line at a time to stop for long periods between the lines. A test page printed out at a normal speed and seems OK. Queue is set correctly.

  In addition to suggesting Elizabeth23, you can check the link below,

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c01940312&JumpID=reg_r1002_usen_c-001_title_r0002

  And if that doesn't work, try it

  Doctor of printing HP and scan.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03287318&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0001

• trying to enter user name on the Web site and it only accepts one digit at a time

  try to open a secure Web site and the user name only accepts one digit. It replaces the 2nd digit, then the 3rd, etc. How do I erase everything that makes that?

  Is what site this?

  Unfortunately, I am not quite understand your description of what happens.

• print one line of output to two lines - Possible or not?

  Hi all

  Could you please tell me is below possible approach or not?

  Requirement: -.

  I want to display the result in two rows, with the data in a row.

  Example:

  Select l_output1, double l_output2;

  Then my output should appear as:

  l_output1

  l_output2

  (Not as l_output1 l_output2)

  I tried like below, but it does not.

  Select l_output1. Chr (10) | the double l_output2

  but it is still printing on the same line. (Chr (10) for the new power line)

  Thanks in advance.

  Kind regards

  UVA

  Simply replace the spaces with a jump of line as:

  SQL > select REPLACE ('abc def GHI ',' ', 10 double;)

  REPLACE('AB)

  -----------

  ABC

  def

  IGS

  The above output is sqlplus in Unix, other tools may appear differently, but line breaks will be there.

  John

• iPad will not update - will be only update one application at a time

  I have a curious problem. Recently, I noticed that I have available updates for applications all the time that have not been downloaded. I see a red circle with a number on my App Stpre app - this didn't use to be the case because the iPad would be updated automatically.

  If I go to the App Store manually and hit all the updates on the updates page waiting all the buttons update app turn to the circle download for a minute and then just go back to update buttons. Nothing is updated.

  Here's the first twist:

  If I try to update by using the UPDATE of each unique application, it will work as long as I don't need to update the application at the top of the list.

  This is the second twist:

  If I update all apps agree only a first, then I remove that first, the next time that the iPad gets new updates to download the top app will get stuck again (some app is) and I have to go and manually update again. So it doesn't seem to be the result of an individual 'bad app.

  Anyone know what I can do to try to get my iPad to begin the auto process

  It's one of the most bizarre App Store update problems I've seen in a while. I guess you trid steps basic troubleshooting, but just in case you don't have it, try the following steps and do them in this order.

  Force close the App Store App. Press twice the House quickly. You will see small glimpses of your applications recently used. Swipe to find the app store App shot upward on the overview of the application to close.

  Next force restart the iPad. No data is affected by this. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  If this does not help, try this. Reset all the settings. You won't lose any data, but most of the settings of the device will have to be entered again in the settings app. This includes passwords for WiFi network, paper settings painted. SIri, privacy settings, etc.. Settings > general > reset > reset all settings.

  If all else fails, you can restore the iOS software. Backup your iPad before you restore, and then restore the backup when you are finished. If this doesn't always help, restore your iPad like new and all over again. Most bought content can be downloaded again free of charge as long as you use the same ID Apple and as long as the content is always available in the store.

  Restore iPad to factory settings

  http://support.Apple.com/kb/ht1414

  Download last purchases

  http://support.Apple.com/kb/ht251

  Restore factory settings may seem exaggerated, but it could end up being what you need to do to finally solve the problem.

• Since installing an add-on of the editing icon, I can't open more tabs / I can only use one tab at a time.

  Since I installed the add-on Favicon Picker 2 which allows you to change icons of bookmark, I can't open the tabs more. The second tab is open, but if you try to access a site, the FIRST tab redirects to this site. Basically, I can use a tab at a time. Is it possible that I can keep this add-on and use tabs?

  What app you have installed? Was it an extension? If you try to turn it off, your problem goes away?

  Read Uninstall modules to find out how to disable an extension.

• My indicator shows only the first line of the string

  Hi all

  I'm having some trouble with chains, could you help me?

  I use a device connected to my computer in a RS-232 port.

  I configured the VISA series correctly. When I write a command to my device, the answer is something like this:

  "XXXXX."

  YYYYYY

  2222

  44444

  WWWW.

  The problem is when I try to read this response. The channel indicator shows only one line at a time every single loop. And the other orders received are stored in the buffer until their time to be displayed to come. I mean:

  In the first loop device XXXXX responses.

  In the second loop the device responds YYYYYY but now I stored what must appear:

  2222

  44444

  WWWW

  XXXXX

  YYYYYY

  2222

  44444

  WWWW

  In the third loop, the device responds 2222 and stores again:

  44444

  WWWW

  XXXXX

  YYYYYY

  2222

  44444

  WWWW

  XXXXX

  YYYYYY

  2222

  44444

  WWWW

  How can I configure my blocks to display the full string?

  Thank you

  Murilo

  Post your code and we can better understand what is happening.

  My first is however you spend only the corrent, reading of the indicator.

  You use a chain shift reg with a knot to concatenate a String?

  

  Your zip code and we'll have a glance.

• HP Deskjet 2540 All in One: can I send a fax to a HP Deskjet 2540 printer all-in-one? I have a VoIP phone line.

  Can I send a fax to a HP Deskjet 2540 printer all-in-one? I have phone line VoIP 'Basic Talk'... are not currently connected to the printer.

  Hi @Sunny9,

  Thank you for joining the HP Forums!

  I understand you're wondering if you can fax with the printer HP Deskjet 2540. I am happy to answer this question!

  According to the user's guideof this printer, the printer cannot send fax. It can only print, scan and copy.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that answers your question!

• PRI all-in-one HP Deskjet 3520: Deskjet 3520 printer all-in-one copy, but will scan and print computer

  This printer has always worked well... used only occasionally. The cartridges are fine.  Everything prints out fine computer, it scans very well, but does not copy.  Looks like it's copy, but shot out a blank page.

  Welcome to the HP community @273frustrated,.

  I understand that your 3520 Deskjet is no copy making more correctly however, you can print and scan without a problem. I will do my best to help! I might be far away but I suspect that there could be a problem with the printhead and it printing black ink. I say this because when you print from your computer, normally the ink colors mix to create a composite black, and when you print copies, it's only the black ink cartridge that is used.

  I want you to try a power reset and make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Please also try the procedure described in this guide and get back to me with the results when you're done and I hope that we can reach a resolution!

  Testify of my answer by hitting the thumbs up below and press the button "accept as Solution" if I have you helped a resolution!

  I hope this helps you!

  • Printer prints a blank Page or doesn't print black or color ink for the series of e-all-in-one-HP Deskjet Ink Advantage and Deskjet 3520 printer

• Test page will only print a line of text, not the full page

  Hi all

  I am new to the forum and have joined today.

  I have HP Deskject 1510 printer running system 8.1 Win.

  I installed my system with a driver update from HP to enable victory support 8.1. But now I can't find my tab driver in Device Manager. The printer works fine, but only

  Hi Kindji,

  Welcome to the HP Forums!

  I understand that you are able to print, but the test page will print only one line of text and not the whole page. Please start with the print and Scan doctor to help use to identify and possibly solve the problem.

  Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

   

• Just bought a Deskjet 3520 e-all in one printer but moving to the United Kingdom, can I still use it?

  It says in the guide specifications power:

  Power adapter: CQ191-60017

  Input voltage: 100-240 VAC

  Input frequency: 50/60 Hz

  I recently bought the deskjet 3520 printer, printer all in one, but was accepted to school grad to the United Kingdom, I obviously want to take my printer with me but wonder If it will take a power adapter with a UK plug adapter? and if yes where can I get a.

  Hello

  Yes, but the problem is not different power, you only need an adapter for $ 5 you can find many airports or tourist shops. The problem will be inks. You may not be able to use the ink cartridges sold in the United Kingdom. You should contack HP to reset the printer. Please read this:

  http://support.HP.com/us-en/document/c02558798

  Kind regards.

• HP Deskjet 6310 all in one: Deskjet HP 6310 all in one wireless printing functions

  I have a HP Deskjet 6310 printer all-in-one and want to know if this printer has wireless capability (i.e., can this printer receive orders for wireless printing)?   (Note, I have a new MacBook Air wireless with send feature).

  @NickC3

  Your printer:

  All-in-one printer, HP Officejet 6310 range

  The printer specifications indicate the printer works with 2 USB, a wired Ethernet connection and - with an adapter - with Bluetooth to be printed.

  Thibault system requirements:

  • USB 2.0 full speed, front and back ports