Position of the active cursors

Similar Questions

• How to set the location of the active cursor

  I'm having trouble trying to put the asset "x axis" cursor without interrupting the other parts of the code. I have a graph of waveform and I want the window to be properly windowed to zoom in on the interesting part of my data. I also have cursors that I want this particular part of the processed data. Unfortunately when I try to set the cursor position and the display area of the code window will do either one or the other. I tried to change the order of the scale minimum and maximum x and beginning and end cursor x posts... all that I got is different combinations of window size/cursor positioning. I'm confused. Why the property node addresses some items and not others? How can I get my automatic zoom window and my Cursor for self-standing at the same time? Here is an example of the code...

  

  Ignore the rose as downstairs. It is not connected to the property node, it just happens to run behind him and it doesn't bother me to keep it there.

  Any help will be greatly appreciated! Thank you!

  Hello

  I'm not so sure... but why not try to use different structures for each process? Try to use highlight for execution see the order of what is happening in your software and then you could determine if you should use a sequence of plate or structure of the event.

• Using the XY Positions of the graphic intensity sliders

  Hey all,.

  I have an application that displays a graph of the intensity. I have two sliders on the chart that I use to make a box around parts of it to "zoom in". Right now, I manually type in the positions X and Y of two sliders in the areas of digital control, for use on the rear panel. Is it possible to use numbers without enter them into digital orders every time?

  Thank you

  LANL13

  You almost her, simply use the ActCrsr property to set the active cursor before reading the values.  Exploited property nodes sequentially up and down then write the value of ActCrsr on top, then pull down, then add the properties of cursor position.

  Standard workflow you get used to using the properties with graphics.  Set the cursor assets/plot then read/write of interest properties, often this is done in a loop For.

• active cursor game

  Hello

  I use a slider with two sliders control.  Click on control moves the active cursor to the location where you clicked (normal behavior).  My question is: can I check where the mouse click occurred, set the active cursor to those closest to you and move this one?

  For reference, here's a sequence of the example of the behavior I want.

  Sliders are at 10 and 100.

  Move the slider 1 of 100 to 160 (cursor 1 is the active cursor)

  Click on close to 5.

  At this point, I would like for slider 2 to spend from 10 to 5.  Instead, it's the 1 slider that moves because this is currently the active cursor.

  Any ideas on how this behavior can be achieved?  I think I'm able to do some, code that rather poorly designed, using a feedback loop and a large number of comparisons.  That compare the new value for the two previous cursor values and set them with force the cursor which "was closest" is one that moves.

  I think this might work, but it seems really sloppy for me and I am in the island there is a better way.

  See here:

  http://forums.NI.com/T5/LabVIEW/can-I-stop-the-auto-movement-of-the-slide/m-p/1038423#M462185

• Set the position of the cursor in the text added (to make the part of the text in index) in WORD using Report Generation Toolkit

  I would like to generate a report in WORD using the report generation toolkit.

  Whenever a text is added to the report, the program should put part of the text index. The problem I am facing with is to set the cursor position in the current location of the text.

  Any suggestions?

  Hello!
  I think that's what you wanted (see attachment).

  First, you must set position for each loop, so after adding the table, your cursor index need to increase the number of added characters. That's why I have included the text of the report, Append - to get the position of the cursor at the end.

  Indexing begins with 0, so you need to set the 3 and 7.

  Hope you get what I mean

• Set the Position of the cursor in the Console (console or Windows default or CVI) window

  Hi all

  I'm working on a project for my college class with a large amount of data acquisition. Unfortunately, the part of the assignment asks to do entirely in the console rather than through a User Interface.

  I've programmed in C++ and have used the command gotoxy(). However, this is not part of the ANSI C standard. I can't find any additional information about the position of the cursor in C or CVI standards. Is it possible to position the cursor in CVI? If I have to, I'll resort to create a matrix of character as a screen buffer and encode them manually.

  Thanks again!

  -Bryan

  CVI 8.5

  These functions are part of the windows kernel. simply #include . If you get a link error, these functions should be in 'kernel32.lib' comes with LabWindows/CVI: Add kernel32.lib to the project and everything should be good (search folder x:\Program NIUninstaller Instruments\ to locate, its complete location depends on the version of the CVI you use).

  of course, this means that you must install the Windows SDK: it is an option in the installer of LabWindows/CVI. (you can also download the Windows SDK from the microsoft Web site, but you would be better with one that comes with CVI).

  a short guide on the documentation for the Windows SDK: each function is documented in a single page on every page of documentation for function, there is always a short summary at the end of the page telling you how to use the function: which header file you include, what library file, you must link with and on what version of Windows , the function is supported. Unfortunately, until the CVI 8.5.1 (I don't know for the CVI 9.0), the documentation for the SDK does not include the table of contents, which prevents to find something useful, unless you know what you are looking for the function.

• Position of the cursor Set for TextInput

  Does anyone know of a method that I can call on TextInput focus to define the position of the cursor or select certain passages in the input field? I try to get the cursor always start typing at the end of the pre-populated text.

  I tried these, but they do not seem to be valid methods for TextInput (I wasn't expecting to work because they are not in the documentation, but worth the try):

  mytxtInput.setSelection(mytxtInput.text.length, mytxtInput.text.length);
  

  OR

  mytxtInput.selectRange(mytxtInput.text.length, mytxtInput.text.length)
  

  Any help would be greatly appreciated!

  Thank you to all members of this forum for everything that they great posts! They have really helped answer many of my questions.

  Hey,.

  you have the right idea, but instead to apply the method setSelection on your TextInput object, you must apply to the internal textField property reference to the textfield inside.

  Here is a code example of an old NET that selects all of the text into a TextInput object:

  package{   import flash.display.Sprite;  import flash.display.StageAlign;  import flash.display.StageScaleMode;  import flash.events.FocusEvent;   import flash.events.MouseEvent;
  
    import qnx.ui.buttons.LabelButton;    import qnx.ui.text.TextInput;
  
    [SWF(width="1024",height="600",backgroundColor="#CCCCCC",frameRate="30")] public class TextInputTest extends Sprite {
  
         private var myInput:TextInput;
  
        public function TextInputTest()       {         super();
  
            // support autoOrients            stage.align = StageAlign.TOP_LEFT;            stage.scaleMode = StageScaleMode.NO_SCALE;
  
            myInput = new TextInput();            myInput.setSize(300,50);
  
            addChild(myInput);          
  
            var newBtn:LabelButton = new LabelButton();           newBtn.label = "Click Me";            newBtn.setPosition(325, 0);
  
            newBtn.addEventListener(MouseEvent.CLICK, selectMyText);
  
            addChild(newBtn);
  
        }     private function selectMyText(e:MouseEvent):void      {         stage.focus = myInput;            myInput.textField.setSelection(0, myInput.textField.length);      } }}
  

  This line is where it does the trick:

  myInput.textField.setSelection(0, myInput.textField.length);
  

  the first parameter is the selection of the starting points and the last parameter is how much it should be chosen.

  Here is the link to the thread that the code comes for more details:

  http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-Air/how-to-select-all-text-with-QNX-T...

  hope that helps. Good luck!

• Is there a "shortcut" that will bring the mouse cursor to a position of 'home' on the screen

  We currently use Windows 7 and extended desktop in a dental practice that allows us to show images on another screen.  Often you "lose" the cursor on the screen when it is accidentally pushed above the extended desktop.   Y at - it a function that allows you to designate a «shortcut"that when pushed, will automatically return the cursor «before and at the centre"in the main screen?»   We already use it the function of 'location circles', but this is not enough in this situation.

  Thanks for your help, everyone.

  You can of course.  I adapted the instructions below on the following page:

  http://flamingkeys.com/2011/03/moving-the-mouse-cursor-with-Windows-PowerShell/

  And it works well.  Here's how.

  1. Open Notepad and paste these 3 lines.

     Add-Type - AssemblyName System.Windows.Forms
     $screen = [System.Windows.Forms.SystemInformation]: VirtualScreen
     [Windows.Forms.Cursor]: Position = '10', 10

  2. Save the file with a .ps1 name (it is a number at the end, not an I or L), taking care in the box save to select "all files (*.)" *)"in the menu file type to the bottom when you save it.  Example:
     

     You can save this file anywhere you like. I recommend your C:\ drive or something, because this is not the file that someone will actually use directly.  You must create a shortcut instead.  I'll assume that you have saved under C:\MoveMouse.ps1 for the rest of this post.

  3. On your desktop, do a right click and make a new > shortcut.  As the location of your shortcut item, use the following:

     PowerShell.exe c:\MoveMouse.ps1

  4. Right click on your newly created shortcut and go to properties and assign a keyboard shortcut.  I used Ctrl + Shift + M to mouse.

  That's all.  Now, whenever you press Ctrl + Shift + M, this script batch file executes and move your mouse to the location 10.10 on the screen (just inside the upper-left corner of the screen).

  Take advantage of :)

• How to add text to the position of the cursor in HTMLEditor in JavaFX

  I know how to add new button to HTMLEditor and I want all of my action button to paste text at the current position of the cursor.

  
  

  //HTMLEditor html;
//String IMAGE_URL = "http://...";
Node node = html.lookup(".top-toolbar");
if (node instanceof ToolBar) {
   ToolBar bar = (ToolBar) node;
   ImageView graphic = new ImageView(new Image(IMAGE_URL, 32, 32, true, true));
   Button myButton = new Button("", graphic);
  bar.getItems().add(myButton);
  myButton.setOnAction(new EventHandler<ActionEvent>() {
   @Override
   public void handle(ActionEvent arg0) {
   //needs code
   }
   });
}

  Use the webkit API, so this isn't something you want to use in production since there is no guarantee that JavaFX will use webkit in the future. Really, the HTMLEditor should have an API editor that makes all of this transparent.

  You will need to import javafx.scene.web.WebView, com.sun.javafx.webkit.Accessor, and com.sun.webkit.WebPage;

              myButton.setOnAction(new EventHandler() {
                  @Override
                  public void handle(ActionEvent arg0) {
                      WebView webView = (WebView)htmlEditor.lookup("WebView");
                      WebPage webPage = Accessor.getPageFor(webView.getEngine());
                      webPage.executeCommand("insertText", " World Cup Soccer ");
                  }
              });
  

• Offset from cursor position to the fields (in an iFrame) only on the Apple iPad

  Hello, I made an animation that once completed, it displays an iFrame that has a few fields.  The entry fields have very well on a laptop pc or mac computer, but when I use an Apple iPad, the positions of the cursor are far outside the fields as I type.

  Here is the Web site page: http://pbpromos.com/ipad-input-fields-error/

  Here I have the same iframe, one inside the border and the other outside edge.  Both work fine on a pc or a mac, but if you try to use an Ipad, you'll see that edge, we show the cursor in the input field down and outside the box.

  You can see for yourself, I put it to you to test and see this error.

  The animate oam file is: https://www.dropbox.com/s/hvydp2x61f6aq13/test-ipad-input-fields.oam

  Here is a link to the files of edge, the .a and java files:

  https://www.dropbox.com/sh/5ljxhc81gu97bcn/zphJ6pMc2J

  Very much appreciate everything you can do on this!

  Appreciate greatly all what you can do for me, because I'm pretty desperate for a solution or a workaround.

  Gotcha - have - try you with sensitive scaling disabled? After looking at this seems to be the culprit. Worth a try to isolate the problem.

  Sarah

• Problem to find the Position of the cursor by using Java Script for an input TextField

  Hello
  
  I have a problem to find the position of the cursor in a field inputText component.
  
  The following code of java script to achieve. The same functionality works fine if I run in a simple html page. But when it is used the same javascript inside the jsff does not the position of the cursor.
  

  var adfComponent = AdfPage.PAGE.findComponentByAbsoluteId("r1:1:it3");
  var adfComponentClientId = adfComponent.getClientId();
  var div = document.getElementById(adfComponentClientId + '::content');
  div.focus();
  var docSelectionRange = document.selection.createRange();
  
  docSelectionRange.moveStart ('character', -div.value.length);
  
  var iCaretPos = docSelectionRange.text.length;
  
  alert("iCaretPos --> "+iCaretPos);  ---> This statement always returning '0'. Instead, i want the cursor position inside the text box.

  Please let me know what I'm missing.
  
  For your reference, sending the sample page html that works fine with the same kind of code.
  

  <html>
   
   <body style="font-family: tahoma; font-size: 8pt;">
   
    <script language="JavaScript">
   
     /*
     **  Returns the caret (cursor) position of the specified text field.
     **  Return value range is 0-oField.length.
     */
     function doGetCaretPosition (oField) {
   
       var iCaretPos = 0;
            alert(oField);
       if (document.selection) { 
   
         // Set focus on the element
         oField.focus ();
   
         // To get cursor position, get empty selection range
         var oSel = document.selection.createRange ();
   
         // Move selection start to 0 position
         oSel.moveStart ('character', -oField.value.length);
   
         // The caret position is selection length
         iCaretPos = oSel.text.length;
       }
   
       // Firefox support
       else if (oField.selectionStart || oField.selectionStart == '0')
         iCaretPos = oField.selectionStart;
   
       // Return results
       return (iCaretPos);
     } 
    
   
   
    </script>
   
    <form name="blah">
   
     Text Field: <input type="text" name="nameEdit" value="">
     <input type="button" value="Get Caret" onClick="document.getElementById('where').value=doGetCaretPosition (document.forms[0].elements[0]);">
  <input id="where">
    
   
    </form>
   
   </body>
   
  </html>

  Thank you and best regards,
  Kiran kristelle
  
  Published by: Kiran kristelle on February 6, 2012 12:00

  ... had the chance to look at the source code of the sample. ADF Faces renders text as HTMLTextArea fields when the value of the rows property. The JavaScript code used in the example of client works differently for FF and IE if the input is a text box. This could be a problem in IE or just used JavaScript code. The rows back to a single line (remove) property makes the text as HTML input feldworking with the JavaScript for IE and FF.

  Frank

• How can I enable the display of the position of the cursor?

  I just noticed that my cursor position does not appear when I work in illustrator.  I looked through all the settings and tried to find information on the web but experiencing problems.  I use CS5.5.

  Thanks for your help.

  Suzette

  Shown in what way?

  The cursor position is displayed in the Info Panel (window > info)

  Or if you show up on some guides (view > SmartGuides) you'll see things like positions of anchor or distances when establishing, but this isn't really the position of the cursor more precisely.

• Flex TextInput to get the current position of the cursor

  TextInput component in how to get the current position of the cursor? Because I want to record a loss of focus on the location of TextInput dynamically add text.

  Here:RichEditableText is a part of the skin of the class spark TextInput and is what is doing all the text in the editing/rendering of work. If you need to make all text advanced operations, they need to go through the property here. Because it is a part of the skin, you need to make sure that is not null before doing anything on this subject.

  Fixed typo: it is the property here is, not textInput

• Select the text of the position of the cursor at the end of the story

  Hi scripters

  I want to cut, copy and paste text from the position of the cursor at the end of the story in a new block of text?

  How can I do this?

  Thanks in advance

  concerning

  a you are the

  Hi Arul,

  Here's an example for you. You can change the position and size of the text box according to your requirement.

  If (app.selection [0].constructor.name! = "PointInsertion")

  {

  Exit();

  }

  MyPage var = app.selection [0] .parentTextFrames [0] .parent;

  App.Select (app.selection [0].parentStory.insertionPoints.itemByRange (app.selection [0] .index, app.selection [0].parentStory.characters [-1] .index))

  App.Cut ();

  var FO = mypage.textFrames.add ({geometricBounds: [0,0,100,100]})

  App.Select(TF.insertionPoints[0])

  App.Paste ();

  Shonky

• Column position of the cursor

  Among the interesting features of Homesite is that you can in addition to dsiplaying line numbers, you can click anywhere in your code (or text file), and the lower left corner of the screen will indicate the column position of the cursor. This is useful when parsing text files and debug javascript that gives you a line number and column position of the error code. I have line numbers enabled in Dreamweaver, but is there a way to determine the column position of the cursor (the number of characters in the line)?

  Thanks, I did a feature request.