Positioning of a ButtonField in a screen fails with an exception for invalid argument... why?

Similar Questions

• While trying to see Planner installation and operation, the test in local mode, the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  While trying to see installation and operation Planner, the test in local mode with only 1 VM the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  There may be a lot of problems in the desktop VM. Agent service see Planner is not running in VM Office. You can check in the event viewer to see what kind of error occurs. The most usual error missing file IP.txt c; drive or harness IP in the IP.txt produce if there is.

• When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  It could be the browser problem because the site is up and running, could you please try another browser.

  If same thing happening there so kindly go to Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release. ProDesignTools and download the desktop here CC application.

  Note: Please follow the instructions very Important, otherwise the download does not start.

  -Pierre

• VMware Converter 4.3.0 - build292238 fails to convert the WSvr2K3 - failed with MethodFault::Exception: converter.fault.CloneFaul

  I managed to convert this WSvr2K3 with an earlier version of VMware Converter (version unknown - disappeared today and didn't is more free to download).  Now with VMware Converter 4.3, I made 6 attempts, and they fail to 19%. ESXi 4.0 host and the original client OS is WinXP.

  Here's what I see in the papers...

  VMware-converter-worker - 11.log:

  [#10] [2011-06-14 08:34:28.893 02780 WARNING "App"] [, 0] [NFC ERROR] NfcNet_Send: 272 requested, only 9 bytes sent
  [#10] [2011-06-14 08:34:28.893 02780 WARNING "App"] [, 0] [NFC ERROR] NfcFileSendMessage: hdr send failed:
  [#10] [2011-06-14 08:34:28.893 02780 WARNING "App"] [, 0] [NFC ERROR] Network error - could not send header message
  [#10] [2011-06-14 08:34:28.893 02780 error "task-10'"] Sysimgbase_Nfc_PutFile failed in H2MDiskCloneMgr with nfcError 3
  [#10] [2011-06-14 08:34:28.893 02780 error "task-10' '] before sesison farm...
  [#10] [2011-06-14 08:34:38.675 02780 error "task-10' '] hosted the managed disk clone failed: Sysimgbase_Nfc_PutFile failed
  [#10] [2011-06-14 08:34:38.675 02780 error "task-10'"] Clone disk failed with error clone Sysimgbase_Nfc_PutFile failed
  [#10] [2011-06-14 08:34:38.675 02780 error "task-10'"] TaskImpl failed with MethodFault::Exception: converter.fault.CloneFault
  [#10] [2011-06-14 08:34:38.675 02780 info "task-10'"] SingleDiskCloneTask [ward-Windows Server 2003 edition Enterprise x 64] host\Shared - \\vmware - Folders\VMwareSharedFolder\vmware_convert\ward-Windows Server 2003 Enterprise Edition x 64 Edition\WindowsServer2003EnterpriseX64Edition - cl1.vmdk--> [ward-Windows Server 2003 Enterprise edition x 64]-[datastore1] ward-Windows Server 2003 Enterpr / ward - Windows Server 2003 Enterpr.vmdk updates, States: 4, percentage: 19, xfer rate (bps): 3043327
  [#10] [2011-06-14 08:34:38.675 02780 info "task-10'"] DiskBasedCloneTask ward-Windows Server 2003 Enterprise edition x 64-> ward-Windows Server 2003 Enterprise edition x 64 updates, States: percentage, 4:19, xfer rate (bps): 3043327
  [#10] [2011-06-14 08:34:38.675 02780 info "task-10'"] CloneTask updates, States: percentage, 4:19, xfer rate (bps): 3043327
  [#10] [2011-06-14 08:34:38.675 02780 info "task-10'"] CloneTask failed
  [#10] [2011-06-14 08:34:38.675 02780 error "App"] Task failed:
  [#10] [2011-06-14 08:34:39.893 02780 info "task-10'"] Programmed timer cancelled, succeeds StopKeepAlive
  [#10] [2011-06-14 08:34:39.987 02780 info ' vmomi.soapStub [49]'] Reset Adapter stub server TCP:192.168.0.21:443: closed
  [#10] [2011-06-14 08:34:39.987 02780 info "App"] Completed task: the task-10
  [#10] [2011-06-14 08:34:39.987 01788 info "task-9'"] CloneTask updates, State worker: percentage, 4:19, xfer rate (bps): 3042304
  [#10] [2011-06-14 08:34:39.987 01788 info "task-9'"] TargetVmManagerImpl::DeleteVM
  [#10] [2011-06-14 08:34:39.987 01788 info "task-9'"] Reuse the existing connection of VIM to 192.168.0.21
  [#10] [2011-06-14 08:34:40.112 01788 info "task-9'"] Destruction of vim. VirtualMachine:480 on 192.168.0.21
  [#10] [2011-06-14 08:35:13.331 01788 error "App"] Task failed:
  [#10] [2011-06-14 08:35:13.331 01788 info "task-9'"] Programmed timer cancelled, succeeds StopKeepAlive
  [#10] [2011-06-14 08:35:14.940 01788 info ' vmomi.soapStub [48]'] Reset Adapter stub server TCP:192.168.0.21:443: closed
  [#10] [2011-06-14 08:35:14.940 01788 info "App"] Task completed: action-9
  [#10] [2011-06-14 08:35:14.987 02340 info "App"] [Converter.Worker.DiagnosticManagerImpl] [Task-9] Production job log bundle.

  VMware-server-converter - 11.log:

  [2011-06-14 08:35:14.956 01512 error "App"] [task, 344] [LRO] Unexpected exception: converter.fault.CloneFault
  [2011-06-14 08:35:14.956 01512 info "App"] [task, 373] [task-6] - ERROR - convert: converter.fault.CloneFault
  {(converter.fault.CloneFault)
  dynamicType = < unset >
  faultCause = (vmodl. NULL in MethodFault),
  Description = "Sysimgbase_Nfc_PutFile failed", he said.
  MSG = ""
  }
  [2011-06-14 08:35:14.956 01512 info "App"] [diagnosticManager, 260] TaskInfo recovered to "converter.task.Task:task - 6" mapping to "converter.task.Task:task - 6".»»»
  [2011-06-14 08:35:14.956 01512 info "App"] [diagnosticManager, 300] The task with id = 'task-6' turned out to be a task 'recent '.
  [2011-06-14 08:35:14.956 01512 info "App"] [diagnosticManager, 314] No group of existing log not found for task with id = "task-6. The task is still 'young' so a bundle of newspapers going now is assigned.
  [2011-06-14 08:35:14.956 01512 info "App"] [diagnosticManager, 756] Recovery of the related tasks of diagnosis for the tasks of server with id = "task-6. ^
  [2011-06-14 08:35:15.237 02212 info "App"] Suspended 1 elements of Planner for employment (job-39) - Sub __thiscallConverter::Server:Job:JobProcessorImpl:SuspendJobAux(const_class_Converter::Server::Job::InternalJob_&,classConverter::VdbConnection_&) ("d:/build/ob/bora-292238/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:823")

  Of course I would appreciate some suggestions.  Is the MethodFault::Exception: converter.fault.CloneFault the problem?  And if so what does that mean?

  Do not use shared folders to access the virtual machine.

  Use a drive letter - or
  just start the virtual machine and use the remote clone function

• R12 post-installation checks fail with RW-50015 for HTTP, help, virtual directory, JSP Page and Login Page

  Hello

  I try to install EBS R12 for three weeks with the same result (after five fail post-installation verification).

  I tried to install Oracle Linux 5.8 32 bit and Oracle Linux 5.8 64-bit but end result is the same. When I installed Linux oral, I chose all the option packages. I also used the latest version of RapidWiz as suggested by some posts on the forum (and also in response to my other post by Hussein).

  Each installation attempt failed with the following text:

  (x) HTTP                                      (x) Help Page

  Virtual directory (x) (x), JSP

  Login page (x)

  It failed with "RW-50015: error".

  =========

  HTTP

  ====

  check the URL = http://prod.ebs1.com:8000

  RW-50015: error:-HTTP listener does not. The service may not be started on the port again. Please check the service and use the button try again.

  ==========

  Help page

  =========

  check the URL = http://prod.ebs1.com:8000/OA_HTML/help

  RW-50015: error:-Help Page does not. The service may not be started on the port again. Please check the service and use the button try again.

  ========

  Virtual directory

  =================

  RW-50015: error:-Http virtual directory server is not responding. The service may not be started on the port again. Please check the service and use the button try again.

  ==============

  JSP

  ===

  check the URL = http://prod.ebs1.com:8000/OA_HTML/jtfTestCookie.jsp

  RW-50015: error:-JSP does not. The service may not be started on the port again. Please check the service and use the button try again.

  ==============

  Login page

  ==========

  RW-50015: error:-Login Page does not. The service may not be started on the port again. Please check the service and use the button try again.

  ==============

  I did find a lot of information to solve this problem.

  Help, please!

  Best regards

  Well, I must fix it in next (trying to start Apache (adapcctl.sh) casts a ' error while loading Shared Libraries: libdb.so.2' on RedHat Linux 5 (Doc ID 879522.1)).

  Once you run the commands in the MOS Doc, stop and start the services than those mentioned above and it should seem so

  Thank you

  Hussein

• run_job fails with permission denied for an executable work as a non - dba user

  I am running Oracle 10.2.0.4 on RHEL 5.5 32-bit and seeks to convert some of Oracle Scheduler cron tasks, but get a permission denied error during the execution of the work.
  
  To simplify things as much as possible, the below shows a work with a call to an executable shell script. The shell script was simply a calendar of Unix command, however, so it works from the command line, as well as the command-line as 'oracle' user, I get the following error:
  
  TEST: OPS$ BATCH_USER > exec dbms_scheduler.run_job ('my_test_job');
  BEGIN dbms_scheduler.run_job ('my_test_job'); END;
  
  ERROR on line 1:
  ORA-27370: slave to the job could not launch an EXECUTABLE type work
  ORA-27300: dependent operation of the OS system: access to the wrapper of extjob failed with status: 13
  ORA-27301: OS Error Message: permission denied
  ORA-27302: an error occurred at: sjsec 3
  ORA-06512: at "SYS." DBMS_ISCHED", line 150
  ORA-06512: at "SYS." DBMS_SCHEDULER', line 441
  ORA-06512: at line 1
  
  I noticed that if I create work under another account Unix which is the dba group and update the externaljob.ora run_user and run_group = s/n, the task runs without error.
  
  I assume that it is possible to run executable tasks in o/s as a group of users outside the dba (or oinstall)?
  
  Below are the details of what I did. If you would be grateful if someone can point me in the right direction. My apologies if I'm missing something obvious here...
  

  Create simple job
  
  TEST: OPS$BATCH_USER > !cat create_test_job.sql
  begin
    dbms_scheduler.create_job (
      job_name            => 'my_test_job',
      job_type            => 'EXECUTABLE',
      job_action          => '/home/batch_user/dba/v2_dba_tasks/run_script.sh',
      start_date          => NULL,
      repeat_interval     => 'freq=daily; byhour=8; byminute=30',
      end_date            => NULL,
      enabled             => TRUE);
  end;
  /
  
  TEST: OPS$BATCH_USER > @create_test_job
  
  PL/SQL procedure successfully completed.
  
  File permissions...
  -rw-r--r-- 1 root oinstall 1537 Feb 28 13:38 /u04/oracle/product/10.2.0/db_1/rdbms/admin/externaljob.ora
  -rwsr-x--- 1 root   oinstall 871282 Aug 22  2010 /u04/oracle/product/10.2.0/db_1/bin/extjob
  -rwx------ 1 oracle oinstall 871282 Aug 22  2010 /u04/oracle/product/10.2.0/db_1/bin/extjobo
  -rws--s--x 1 nobody nobody   871322 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extjobO
  -rwx------ 1 oracle oinstall 871322 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extjoboO
  -rwxr-x--x 1 oracle oinstall  29910 Aug 22  2010 /u04/oracle/product/10.2.0/db_1/bin/extproc
  -rwxr-x--x 1 oracle oinstall  30130 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extprocO
  -rwxr-xr-x 1 oracle oinstall    327 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extusrupgrade
  
  
  For testing, I'm just doing a Unix calendar command...
  [batch_user@test v2_dba_tasks]$ cat run_script.sh 
  #!/bin/sh
  
  /usr/bin/cal
  
  
  Contents of $ORACLE_HOME/rdbms/admin/externaljob.ora...
  [root@test admin]# grep '^run' externaljob.ora 
  run_user = batch_user
  run_group = comp
  
  The Unix account is not in the dba or orainst group ('comp' group only).
  
  Run from O/S...
  [batch_user@test v2_dba_tasks]$ ./run_script.sh 
     February 2011    
  Su Mo Tu We Th Fr Sa
         1  2  3  4  5
   6  7  8  9 10 11 12
  13 14 15 16 17 18 19
  20 21 22 23 24 25 26
  27 28
  
  Run as 'oracle' user...
  [oracle@test v2_dba_tasks]$ ./run_script.sh 
     February 2011    
  Su Mo Tu We Th Fr Sa
         1  2  3  4  5
   6  7  8  9 10 11 12
  13 14 15 16 17 18 19
  20 21 22 23 24 25 26
  27 28
  
  But running from scheduler results in error...
  TEST: OPS$BATCH_USER > exec dbms_scheduler.run_job('my_test_job');
  BEGIN dbms_scheduler.run_job('my_test_job'); END;
  
  *
  ERROR at line 1:
  ORA-27370: job slave failed to launch a job of type EXECUTABLE
  ORA-27300: OS system dependent operation:accessing extjob wrapper failed with status: 13
  ORA-27301: OS failure message: Permission denied
  ORA-27302: failure occurred at: sjsec 3
  ORA-06512: at "SYS.DBMS_ISCHED", line 150
  ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
  ORA-06512: at line 1

  Hello

  The run_user specified in externaljob.ora don't have to be a member of the oinstall group.

  I think you can run into a problem specific to run_job with use_current_session-online set to true when the local OS user running sqlplus is not a member of oinstall.

  The same error occurs with a background task run (for example use_current_session-online fake)? Occur if you are using sqlplus from another machine?

  Thank you
  Ravi.

• Update failed with error 0x8020000E for update XP (KB898461)

  My system has been updated to SP3 automatically earlier. How ever the system crashed due to virus attacks and had to be recovered using recovery provided by the OEM CD.

  After that recovery, windows updates may not install and my system is not updated with SP2 to SP3 preinstalled level.

  In addition, cannot install Internet Explorer 8.

  Any suggestions to fix this?

  Error 0x8020000E is: BG_E_VOLUME_CHANGED

  "The destination volume changed. If the disk is removable, it might have been replaced by another disc. Reinsert the original disk and return to work. »

  Occurs usually when a score has been changed, resized, cloning, etc.

  Hot flushes sometimes the C:\Windows\SoftwareDistribution folder fixes this error.

  Rename/Delete the C:\Windows\SoftwareDistribution folder, you will lose your history of WU list (not important). If everything works fine once again, you can delete the renamed folder C:\Windows\SoftwareDistribution.

  Rename the folder C:\Windows\SoftwareDistribution
  
  Click Start, choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click on stop.
  Stopping the service will take a moment.

  Rename the folder "C:\Windows\SoftwareDistribution":
  a. Click Start, click Run, type %any and then click OK.
  b. right-click on the C:\Windows\SoftwareDistribution folder, and then click Rename.
  c. Type SoftwareDistribution.old, and then press ENTER to rename this folder.

  Click Start. Choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click Start.
  Starting the service will take a moment.

  How to solve Internet Explorer 8 installation problems
  http://support.Microsoft.com/kb/949220

• Update of CRMI against COE Oracle 10 G server fails with the error message Invalid Date of creation

  I have an application that performs an update of a piece of content via CRMI. The element is specified viaA content ID. Since UPDATE_DOCINFO is the service DOC_INFO needs service is executed first to get it.

  DOC_INFO returns information very well. However, when UPDATE_DOCINFO is executed, it always seems to return an error message stating that creation Date is not valid. The element content updates without this error via the Native Web INTERFACE. My code works when pointed at an Oracle 11 G Server COE.

  I tried:

  1. Adding did so to a new DataBinder, without dCreateDate
  2. Adding did so to a new DataBinder, with dCreateDate
     • Add dCreateDate as a date object (from DOC_INFO response I've tried)
       • through thegetDate()
       • manual conversion with DataObjectEncodingUtils.decodeDate() (w / get() )
     • Add a string
       • convert with SimpleDateFormatter similar to how RIDC encodes (w / getDate() )
       • manual conversion with DataObjectEncodingUtils.encodeDate() (w / getDate() )
       • as «»
       • as null
       • get()Instead ofgetDate()
  3. Directly using DOC_INFOresponse Binder
  4. With the help of the library of CRMI 11 G (3 above) 5 using the RIDC 10 G (1-3 above) library

  All listed approaches have returned the same error message.

  Here's the method I use for the update. The commented code is the thing I've tried that does not resolve the issue.

  public ServiceResponse executeByContentId (String szContentId, map < String, String > updateHMap)

  throws RemoteException

  {

  If (log.isDebugEnabled ())

  {log.debug ("the execution of an update:" + szContentId) ;}}

  get the RIDC context - guess the context RIDC has already been created.

  IdcContext = RIDCApp.IDC_CONTEXT_LIST.get context (getUsername ());

  Download the client

  Customer IdcClient = RIDCApp.IDC_CLIENT;

  create the command object to run

  DataBinder dataBinder = client.createBinder ();

  film for convenience

  Binding EDAMDataBinderWrapper = new EDAMDataBinderWrapper (dataBinder);

  Binder. DOC_INFO_BY_NAME();

  binder.putDDocName (szContentId);

  binder.putRevisionSelectionMethod (RevisionSelectionMethod.Latest);

  ServiceResponse rawResponse = null;

  Try

  {

  log.info ("About to RUN: (previous update) \n" + binder.toString () ");

  rawResponse = client.sendRequest (context, binding);

  DataBinder responseBinder = rawResponse.getResponseAsBinder ();

  log.info ("Found: (previous update) \n" + responseBinder.toString () ");

  used to get the result

  EDAMDataBinderWrapper docInfoResult =

  EDAMDataBinderWrapper (responseBinder) new;

  //used for the update

  EDAMDataBinderWrapper updatebinder =

  EDAMDataBinderWrapper (client.createBinder ()) new;

  //new EDAMDataBinderWrapper (responseBinder);

  //required fields!

  DocInfoSet of the DataObject = docInfoResult.getResultSet ("DOC_INFO")

                                                                          .getRows () .get (0);

  updatebinder.putLocal ("dDocName", szContentId);

  updatebinder.putLocal ("a", docInfoSet.get ("dID"));

  updatebinder.putLocal ("dRevLabel", docInfoSet.get ("dRevLabel"));

  updatebinder.putLocal ("dSecurityGroup", docInfoSet.get ("dSecurityGroup"));

  updatebinder.putLocal ("dDocAccount", docInfoSet.get ("dDocAccount"));

  //updatebinder.putLocal ("dCreateDate", docInfoSet.get ("dCreateDate"));

  //updatebinder.addDate ("dCreateDate", docInfoSet.getDate ("dCreateDate"));

  //updatebinder.putLocal ("dCreateDate", "");

  //updatebinder.putLocal ("dCreateDate", null);

  //updatebinder.putLocal ("dCreateDate", docInfoSet.getDate("dCreateDate").toString ());

  DCreateDate //Date = docInfoSet.getDate("dCreateDate");

  / * BEGIN - Encoder Date average Java * /.

  //example format: 2012-05-16 15:35

  SimpleDateFormat sdf = new SimpleDateFormat ("yyyy-MM-DD kk:mm:ss");

  updatebinder.putLocal ("dCreateDate", sdf.format (dCreateDate));

  //END - encoder Date average Java * /.

  / * BEGIN - Encoder Date Oracle COE medium * /.

  updatebinder.putLocal ("dCreateDate",

  DataObjectEncodingUtils.encodeDate (dCreateDate));

  //END - code way Date Oracle COE * /.

                  /*

  String dCreateDateString = docInfoSet.get("dCreateDate");

                  try

                  {

  updatebinder.addDate ("dCreateDate",

  DataObjectEncodingUtils.decodeDate (dCreateDateString)

                                                  (. getTime());

                  }

  catch (ParseException exception ignored) End Sub

                  */

  String xAssetSubType = docInfoSet.get("xAssetSubType");

  //log.debug ("setting in"xAssetSubType":" + xAssetSubType);

  updatebinder.putLocal ("xAssetSubType", xAssetSubType);

  / / Set the values of metadata

  for (String szFieldName: updateHMap.keySet ())

  {updatebinder.putLocal (szFieldName, updateHMap.get (szFieldName)) ;}}

  updatebinder. UPDATE_DOCINFO(); to say the next request to perform the update

  //now that we have result - try the update

  Return the response of update of the document

  log.info ("About to RUN: (updated) \n" + updatebinder.toString () ");

  If (log.isDebugEnabled ())

          {

  log.debug ("update fields");

  for (entry entry < String, String >: updatebinder.getLocalData () .entrySet ())

                  {

  log.debug ("Update: '" + entry.getKey () + "' to '" + entry.getValue () + "'" "");

                  }

          }

  ServiceResponse response = client.sendRequest (context, updatebinder);

  log.info ("Found: (updated) \n" ")

  + response.getResponseAsBinder () m:System.NET.SocketAddress.ToString ());

  return response;

          }

  catch (Cie IdcClientException)

          {

  log.error ("Error updating the Document", sea ice);

  //throw new RuntimeException ("Error updating the Document", sea ice);

  //throw new RuntimeException ("error updating the Document-" + ice.getMessage (), ice);

  throw RuntimeException (ice.getMessage () new, ice);

          }

  //something gone wrong

  //return null;

  }

  I could solve the problem.

  The answer is proven be setting the parameter UserDateFormat on the RIDC Binder that I used to make the update request.

  Then I got just to make sure that all of my dates been serialized using this same format.

• Acrobat installation fails with the error message: invalid in the specified key State

  Here is the information from the computer system: Windows 7, 64 bit.

  Found the fix. Thanks Nat deer!

  Go to the control panel.

  Select uninstall a program (or programs and features, according to the options you gave).

  Click on the link at left to view installed updates.

  In the search window in the upper right corner of the window, locate KB2918614.

  Uninstall this security update.

  If you have a Windows Update set to automatically install updates, this update will finally get re-installed and you will have this problem again. To prevent this, you will need to go back to the Control Panel, go to Windows Update, see important updates are available by clicking on the link that says "x important updates are available" and uncheck the check box for the security update that you have uninstalled just (it will have the same KM number in brackets (: KB2918614).

• Generation Android fails with plugin urban airship cordova

  PhoneGap generation for my application fails with plugin urban airship cordova. Here is the log of the build errors. ID of the application: 1491664

  Don't know how to solve this problem. All the world is facing something like this before?

  Retrieve the plugin "urbanairship-cordova" through the Museum

  Installation of "urbanairship-cordova' to '5.3.0' for android

  --------------------------------------------------------------------------------

  COMPILATION OUTPUT

  --------------------------------------------------------------------------------

  Build the option-"unrecognized (ignore).

  Running: / project/gradlew cdvBuildDebug b /project/build.gradle-Dorg.gradle.daemon=true - PcdvBuildMultipleApks = false

  FAILED: Build failed with an exception.

  * What went wrong:

  There was a problem the root project configuration 'project '.

  > Cannot resolve all the dependencies configuration ': _debugCompile'.

  > Not found com.google.android.gms:play - services-location: 9.0.2.

  Search in the following locations:

  https://repo1.maven.org/maven2/com/google/android/gms/play-services-location/9.0.2/play-se services-location - 9.0.2.pom

  https://repo1.maven.org/maven2/com/google/android/gms/play-services-location/9.0.2/play-se services-location - 9.0.2.jar

  https://jcenter.bintray.com/com/google/android/gms/play-services-location/9.0.2/play-servi CES-location - 9.0.2.pom

  https://jcenter.bintray.com/com/google/android/gms/play-services-location/9.0.2/play-servi CES-location - 9.0.2.jar

  file:/Android-SDK/Extras/Android/m2repository/com/Google/Android/GMS/play-services-Locati on/9.0.2/play-services-location-9.0.2.pom

  file:/Android-SDK/Extras/Android/m2repository/com/Google/Android/GMS/play-services-Locati on/9.0.2/play-services-location-9.0.2.jar

  file:/Android-SDK/Extras/Google/m2repository/com/Google/Android/GMS/play-services-locatio n/9.0.2/play-services-location-9.0.2.pom

  file:/Android-SDK/Extras/Google/m2repository/com/Google/Android/GMS/play-services-locatio n/9.0.2/play-services-location-9.0.2.jar

  Required by:

  : project: not specified

  I noticed that UrbanAirship pushed a new version of their plugin recently that upgrades several dependencies (see the diff). Some of them is not yet supported on PhoneGap Build. Lock your AU plugin to 5.2.0 and everything should work as before:

• Failed to start. Screen with black error "Loadkey failed with error 1450" when starting.

  Original title: Loadkey failed with error 1450

  Windows Vista does not load on HP Pavilion. Is just a black screen and Loadkey failed with error 1450. What is the solution?

  Hello

  1. Since when are you facing the issue?

  2. what exactly do you mean when you say that Windows Vista will load not Hp Pavilion?

  3 are you referring to the built-in software or you are facing problems of not being able to boot to the desktop?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest that you try to perform the file system Checker analysis on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Method 2:

  I also suggest you to download and install the latest drivers from the manufacturer's Web site.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or you can also use the link provided:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Hope this helps and provide us more information if you need more assistance.

• Windows 7 clean install fails with ACPI.sys and error blue screen stop: 0x0000007E.

  I'm trying to do a clean install of windows 7 Professional (32-bit) on my laptop ASUS X61SL. Initially there was Vista Home Premium (32-bit) running on this laptop.

  After the start of the boot and windows 7 by loading files and starting windows comes the blue screen saying:

  STOP: 0x0000007E (0xC0000420, 0x8EB256C6, 0x8A386640; ox8A386170)
  ACPI.sys - address 8EB256C6 base at 8EAD7000, Datestamp 4CE78F21
  I tried an update of the BIOS already and a full erase of the disk which has been recommended by the ASUS support. Nothing worked, and not even the ASUS support has other ideas how to get Windows 7 to run.

  OK, how much RAM have you?

  I found this information:

  However, I remembered seeing something on the Internet about Microsoft 64-bit being unhappy with 4 GB of ram during the installation process of the systems... .then I got 2 GB of ram and the installation went OK! I will give the memory later.

  Source:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/a-clean-install-of-win-7-fails-with-acpisys-and/edca086c-D798-4b78-805d-301dcc8535a0

  I know - you try to install the Win7 SP1 32 bit only, but you can try it.

  LC

• Install Windows 8 will fail with white screen

  Hi all

  I am trying to install Windows 8 32-bit on an Acer Aspire 5710 G. The installation goes very well and resets, 1 - 2 times normally. Happens to the configuration of the devices and about 73% then the screen is blank. I leave for a few hours, but it just not right. When I walk, it reports on the electric installation has failed and restores the installation (BTW really nice feature).
  The symptoms are very similar to this post, but my hardware is very different. http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/blank-screen-at-the-very-end-of-Windows-8/8427b0c0-ccf0-46CB-B274-6af2a31eefdb
  The laptop is old for a few years, but past fine Upgrade Advisor. Specifications of the laptop are:
  -Intel Core Duo T2450 (2.0 GHz) 1
  -ATI Radeon HD2300
  -3 GB RAM
  I tried the following installation combinations:
  -Upgrade files now.
  -Update do not keep files.
  -Boot from DVD and remove my existing partitions.
  After some research, I also tried:
  -Connect an external monitor and the TV where the video was going to a different output.
  -Check the BIOS updates - I'm using the latest version and given the age of the machine do not expect not yet updated.
  -Disconnect all the extra material with the exception of a USB mouse.
  -Check the settings of the BIOS for NX etc but there is nothing that seems useful. BIOS Acer has very few options.
  Someone at - it any other suggestions? Or know of any incompatibility with the above material? I wonder if the laptop is just incompatible with Windows 8, and Upgrade Advisor simply doesn't know about yet.
  Thank you
  Brett.

  After having no luck here or via Acer I have renounced the upgrade to windows 8. Called the MS store and got my refund processed today.

• Can't do dmg file in the folder - "operation failed with status 1"

  I have a 1 TB hard that often went around. There are some personal files here although I am trying lock creating a DMG using disk utility and turning on encryption. However, whenever I try to do that, I always get an error code - status 1 to be exact. Note that it only does on some records. I had about 15 cases work this way with success, but I get this error a LOT... probably about 40% of the time. "Whenever I try too search ' operation failed with status 1," nothing appears! So frustrating! Any help at all is greatly appreciated! Please see the photos to see more. Thank you! Information... Files in JPEG areinformation1st picture2nd photophoto 3

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• HPDM deployment fails with the error code: 14031022

  Hello everyone,

  I ve a strange problem with a new repository of child I ve created two weeks ago. Following situation:

  We have a master and (until now) repository repository a child for two locations. Capture and deployment on each side works fine. Now we're getting a third place, so we need another hpdm gateway and a child repitory to this place.

  I've added and configured as one worked and insert the IP address of the gateway again to a thin client to the new location. When I deploy an image on this client, I get the following error in the console of hpdm:

  2014-12-16 11:02:09 Assign repository: repository child name repository
  2014-12-16 11:02:13 synchronized correctly Completed.
  2014-12-16 11:02:14 task sent to the device management gateway
  2014-12-16 11:02:17 task has been retrieved from the agent.
  2014-12-16 11:02:58 deploy the image ready using the repository: repository child name guard.
  2014-12-16 11:02:58 running common-task failed.
  2014-12-16 11:02:58 Errorcode: 14031022, error details: download the file (s) failed.
  2014-12-16 11:02:58 running common-task failed.
  2014-12-16 11:02:58 Errorcode: 14031022, error details: download the file (s) failed

  Agent of Thin Client Gateway: 4.5.3660.18502

  HPDM bridge officer: 4.5.3660.19.503

  agent update task works.

  I ve configured the shared folder and FTP access. Both are available from thin client. Configuration of the repository the two test passed successfully.

  Repository of child synchronize all the data from the master repository with success.

  Usually, I use FTP in IIS services, but filezilla I ve installed (disabled FTP IIS) for the best connection.

  Connects to the deployment task:

  000027) 16.12.2014 11:02:27 - (not connected) (10.32.2.52) > connected on port 21, sending the welcome message...

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > USER test

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > 331 password required for the test

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > PASS *.

  16.12.2014 (000027) 11:02:27 - test (XX. XX. X.XX) 230 > connected

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > FEAT

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > QUIT

  16.12.2014 (000027) 11:02:28 - test (XX. XX. Goodbye > 221 X.XX)

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > disconnected.

  Next, I get the above error HPDM. The server log HPDM said next.

  2014-12-16 11:11:35 [line 2] WARN Util - revertNumericString fail: k.A.

  2014-12-16 11:11:35 [line 2] WARN Util - revertNumericString fail: k.A.

  Mhh not a lot of information.

  I Don t really get what could be the problem. You have an idea? Do you need more information (newspapers, error message TE) for assistance?

  Concerning

  Martin

  After the coup of controller.conf and the screen of the dialog editor repository that you set, your master repository was not configured this way:

  ReposPath has the value "C:\Inetpub\Ftproot\HPDM" in controller.conf (assume C:\Inetpub\Ftproot is the root directory of the FTP server)

  In the Master repository Editor dialog box:

  Implement FTP path to ftp: / //HPDM - he WS ftp: / /<>/. your screenshot.

  This is the reason that all of your linked FTP task failed with the same error code.