Install Windows 8 will fail with white screen

Similar Questions

• Windows backup will fail with the error code: 2147942402

  Hello

  I'm trying to run a backup on a Windows SBS Server 2008 using Windows Server Backup to an external 2 TB USB hard drive - I chose the backup once and personalized with "activate System Recovery."

  This fails with an error message "the system cannot find the file specified" after having transferred about 28.23 GB of data.

  The Event Viewer error code: 2147942402

  I tried to run the backup to another device (a disk on a PC on a network) and it successfully without any problem which seems to me some kind of problem with the USB key.

  I came across these links: http://support.microsoft.com/kb/979281 and http://support.microsoft.com/kb/976972 - but the server I use does not have a USB Host Controller NVIDIA - instead, there "Intel(r) ICH9 Family USB Universal Host Controller" - so I'm hesitant to try this fix.

  I'll reformat the USB drive to see if that helps...

  Thank you very much

  Adrian

  Hi Adrien,.

  The question you posted would be better suited in the TechNet Forums since we have dedicated to this support; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Keep us updated on the status of the issue.

• Windows Update will fail with the error: error code 80072F78

  Original title: windows update failed, it says 'Error code 80072F78' even if I already ran Microsoft FixIt and fixed the problem.

  Windows update failed, it says 'Error code 80072F78' even if I already ran Microsoft FixIt and fixed the problem.

  Hello
   
  1. who is the software antivirus installed on the computer?
  2 did you have any software or changes to the material on the computer before this problem?
   
  Method 1:
   
  See the steps in the following links.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
   
  If the problem persists, see the steps from the link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997
   
  Registry warning
  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
   
  Important: While performing the check disk on the hard disk, if bad sectors are found and if it attempts to repair this area, all available on which data can be lost.
   
  Hope the information is useful.

• Windows 7 Pro: crashes with white screen after login

  Dear community,

  I have an annoying bug with Windows 7 Professional (64-bit version) and could not find any problem even until that or other forums.

  After logging in (choose user and entering the password), the "Welcome" screen appears for a few seconds. Then there is a blank wallpaper (i.e. According to the user settings) and the system is blocked. Everything you see is a mouse cursor (a regular), who move, but not possible interaction.

  It does not work to get the Task Manager with CTRL-ALT-DEL in that State, and at least until 30 minutes just don't get past/changes. However, there is ongoing activity of hard disk, according to the LED. Only way out is to cut using the power switch.

  The accident happened exactly regularly, but about every start of the second. Sometimes more often (i.e. it takes 3 or 4 attempts to open a session) or sometimes less often (i.e. up to 3 or 4 boots without problem).

  Other than that, it is once you have successfully connected, the system works very well.

  I tried to remove the user and re-create it, but the bug reappears immediately after.

  Any ideas? Or advice where I could find what program/process is actually blocked?

  Hi Ruth & all,

  Thanks for your suggestions.

  Troubleshooting took a long time, because I do not use this PC every day and sometimes you can't tell if the problem is really gone or the boot just happened to work several times in a row...

  After all, using the clean boot and the reactivation of services/startup items one by one, it seems that I could single out the Internet of G-Data as a cause security suite. I'm trying to do, with their support, if this is a known bug.

  Best,

  Colin

• When I try to download the windows update, download 2007Microsoft Office suitService Pack3 SP3 275,7 MB 1%, it will fail with error code 80072EFE

  When I try to download the update of windows, download 2007Microsoft Office suitService Pack3 SP3 275,7 MB 1%, it will fail with error code 80072EFE, Please HELP

  Hello

  1. are you able to install some other updates?

  I suggest you try the steps from the link below and check if it helps.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update: http://support.microsoft.com/kb/836941

  Hope this information is useful.

• After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.

  After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.  Try to understand the problem.  Can I try to reinstall? Problem is on flashing screen cannot do anything.

  Original title: Windows 10

  Hello

  Thanks for posting in the Microsoft Community.

  (1) do the Windows 10 installation process is complete?

  (2) you are able to view the Windows 10 desktop?

  You can check the help below article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/troubleshoot-screen-flickering

  If the problem persists, you can reinstall Windows 10 by downloading an ISO image file to create installation media.

  To download an ISO image see the link below:

  https://www.Microsoft.com/en-us/software-download/Windows10

  To create an Installation media check out the link below.

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

  It will be useful. Please get back to us with the State of the question.

  Thank you.

• System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

  Original title: svchost (1020)

  Event type: error
  Event source: ESENT
  Event category: general
  Event ID: 490
  Date: 2010-10-19
  Time: 14:51:34
  User: n/a
  Computer: ROB
  Description:
  Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.".  The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hi Robrw,

  1. when exactly you receive this error?

  2. don't you make changes to the computer before this problem?

  You can try to rename the catroot2 folder and check if it helps.

  Step 1:

  a. Click Start and in run type C:\windows\system32 and click ok

  b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

  If you are not able to do the normal mode, try to start in safe mode and rename

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

  See the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Step 3:

  You can also try to temporarily disable third-party security software and firewalls and check what is happening.

  Note: Activate the security software after the resolution of the problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite L750 sometimes lit with white screen after hibernation

  When I got the system, sometimes awake hibenate with white screen!

  I noticed, when this happened, 'toshiba eco utility' is frozen.
  So, I think that: Toshiba Eco Utility is crushed, put into hibernation system and the awakening of the race, but screen blink.

  This time I push the power button, the system go to sleep and next push is normally awake!
  I don't know why. I use this app Eco Utility, but I'll delete it.

  Anyone?

  You deleted the Toshiba eco utility of the system now?
  Did you notice the same problem when you Hibernate your laptop using other profiles of power?

• I would like to know how to re - install windows on a laptop with the product key on the back of the laptop.

  install windows with the product key

  someone I gifted an old laptop with a lot of things about what I don't want and stuff I want is missing. I would like to know how to re - install windows on the laptop with the product key on the back of my laptop.

  or, even better, if someone could find me a way to get a disk to restore to factory without purchasing information, which would be awsome.

  I thank you for your time and have a good day.

  If the laptop is one of the well known brands, he may well have a restore partition.  If you do not have a manual to the user of this computer, then go to the manufacturers website and look for the documentation.  At the very least, you should be able to find information about how to restore the laptop from the recovery partition.

  If the restore partition has been decimated, the manufacturer may still have available for a nominal cost of installation diskettes.

• Tried to install KB2447961. This failed with the error code 770.

  Tried to install KB2447961. This failed with the error code 770.

  http://support.Microsoft.com/kb/2447961

  How to get help and support for this security update

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  http://support.Microsoft.com/common/international.aspx?rdpath=4           

  North American customers can also obtain instant access to unlimited free support by email or unlimited individual chat by visiting the following Microsoft Web site:

  http://support.Microsoft.com/OAS/default.aspx?&PRID=7552           
  UTC/GMT is 19:27 Saturday, September 17, 2011

• KB26865509 will not be installed, offered guard but fails with the 0xf0f4 error

  KB26865509 security update will not install on my system!

  KB26865509 is not a valid update or KB number.

  Assuming you meant KB2686509, you are not alone!

  See the RESPONSE of two 2 messages in this related thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115c-419d-ac37-03ff8927b79c

• Installation of Windows Vista Service Pack 2 (KB948465) will fail with the error code 800F081F

  Hello

  I tried to install windows service pack 2 for vista via windows update, but it fails everytime with error code: 800F081F. I tried to run Microsoft FixIt and systsme even update the tool but no luck. even the system tool update crashes while ' installation of hotfix for Windows (KB947821) (update 1 of 1)...» ". No online solution proved to be correct in my case. Help, please.
  Thank you

  Hello

  System update readiness tool will take some time, so I suggest you wait a while until the process is completed.

  You can find newspapers by accessing this folder.

  c:\Windows\logs\cbs\checksur.log

  I would suggest trying the following steps and check.

  Method 1:

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry - http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Methods 1 and 2 require changes in the registry to do. Make sure that you back up the registry before you proceed.

  I would have you look at the article-

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2-

  I would have you look at the article-

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997#appliesTo

  Note: The Chkdsk command will try to fix bad sectors on the hard drive. All the data on these areas could be lost in the process. It is also possible for the computer to enter in a start State no.

  Proceed at your own risk.

  In addition, see the reference article-

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Answer if you need more information on this, and we will be happy to help you.

• Update Windows again me that there are 11 important to install updates. It fails with the error 80070490, Code and Code 80073712.

  Original title: update Windows problem on Vista 64-bit

  My Windows Update repeat me that there are 11 important to install updates. It fails whenever I have try running with 80070490, Code and Code 80073712 error.

  I tried the Windows analysis tool, the difficulty it tool Microsoft and the web site Microsoft Fix It I have have also run a registry cleaner and that he would follow the instructions of Microsoft to solve the problem of Windows Update by editing the registry, but I get 'Access denied' when ordering fast, even though I checked all permissions.

  The updates are:

  Update for Windows Vista for x 64-based systems (KB972145)
  Update for Windows Vista for x 64-based systems (KB2633952)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2572075)
  Update security for Windows Vista for x 64-based systems (KB2564958)
  Update for Windows Vista for x 64-based systems (KB970430)
  Update security for Windows Vista for x 64-based systems (KB2378111)
  Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista for x 64-based systems (KB968930)
  Update for Windows Vista for x 64-based systems (KB2345886)
  Update security for Windows Vista for x 64-based systems (KB967723)
  A security update for .NET Framework 3.5 SP1, Windows Vista SP2 and Windows Server 2008 SP2 for x 64 systems (KB2518866)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2633874)

  I realize that these are not critical updates, but am concerned that, if there is a problem with the update, it will not refresh the critical updates either.

  Any help would be greatly appreciated. Thank you.

  Etherlass

  Hello again,

  Thought I would let you know that I've finally sorted this! :)

  In another forum I read a post from someone who had a similar problem and solved it by uninstalling the "failures" updated, restart the PC and then re-run the update. It worked! It had not occurred to me to try what I've assumed that 'impossible' meant that they had not installed at all, not that they didn't had simply not installed correctly and must have become corrupt.

  I hope this will help someone else who has the same problem, I've had!

  Best wishes

  Etherlass

• Windows 7 Professional with white screen and the mouse cursor

  I have a Dell Latitude E4310 running Vista professional 7.

  It worked fine with no problem except when I turned it on this morning.

  He went through his normal boot sequence (Logo Microsoft...) and then instead going to my office for display, the screen stayed black with only my visible mouse cursor.

  I can boot into safe mode and my desktop is visible.  I don't know what to do at this point and would be grateful to anyone who helps.  Thanks in advance!

  Hello

  Do a Safe Mode system restore to before the problem.

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  __________________________________________________

  If that does not fix it:

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• Windows 8 installation fails with the error "the product key entered don't match any available to install windows images.

  I have a Sony Vaio SVE1113M1EB provided with pre-installed Windows 8. Yesterday, my laptop won't start and recovery tools did not work. Then I deleted the partitions in stock and tried to install Windows 8 on DVD. He said: "the product key entered is not one of the images available for installation windows." I wrote my product key. How to install Windows 8?

  Original title: Installation of Windows 8

  Hi Qadir,

  The issue could be due to the supplied product key does not match the press which is used to install Windows. The product key that is provided can be a file without assistance, in a. EI. CFG file, in the PID.txt file or in the BIOS firmware. Windows OEM 8 machines ship with the product key in the firmware, and if this product key does not match the press, then you will see the above error message.

  I suggest you to change the product key to the correct for the media you are trying to install. If the system has a product key in the motherboard (o. a. 3.0 [Activation OEM] provides an OEM product key in the firmware), you use an Unattend file, file (EI.cfg) edition Configuration or the product ID file (PID.txt).

  You can check the link:

  «Windows 8 or Windows Server 2012 installation may fail with the error message: the product key entered does not match any of the images available for installation Windows.» "Enter a different product key"

  http://support.Microsoft.com/kb/2796988/en-us

  I hope this helps. If you have any other questions, we will be happy to help you.