Possible for the host to read the files on virtual machines?

Similar Questions

• While trying to see Planner installation and operation, the test in local mode, the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  While trying to see installation and operation Planner, the test in local mode with only 1 VM the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  There may be a lot of problems in the desktop VM. Agent service see Planner is not running in VM Office. You can check in the event viewer to see what kind of error occurs. The most usual error missing file IP.txt c; drive or harness IP in the IP.txt produce if there is.

• Require a process step by step for the migration of virtual machines to new VMware ESX hypervisor

  Hello

  I'm looking for the method step by step for the migration of virtual machines to new host ESX Migration both cold and hot.

  Scenario - I have two data centers running ESX host stand-alone (with VM) in Europe. I need to build the new ESX host in new Dataceter to Singapore.

  Need prerequisites, the methods available for migrate VMWARE virtual has new host ESX (in the new data center) with minimum downtime.

  It will be great if you can enumerate the markets or redirect me to documentation that I can use to create detailed steps as the target host compatibility check on VMs and so on.

  Please advice

  Concerning

  AVI

  The steps are correct. The virtual machine must be turned off (step 3).

• PowerCLI script for the deployment of virtual machines via the model using customizations comments

  Hello... I hope someone can give me a script that will do the following:

  (1) provision VMs in vCenter template (I need 125 + VMs created in the next day or two)

  (2) use the existing customizations of comments in vCenter

  (3) let me enter data warehouses available to be created on the virtual machines.  Example: I want that VMs on warehouses of specific data as LUN2, LUN5, LUN6, LUN12, LUN1, etc...  However, the script must have the ability to know when a data store is near the threshold of capacity, say 90%, so it can use one of the other warehouses available, identified in the script... similar to storage profiles.  We still have to adopt profiles storage but plan to do so once upgraded us to v5.1 in the next month or two.  We hope that this will help us keep our replicated LUN more organized during the use of SRM and copy to remote groups, our team of storage's configuration on 3PAR.

  
  Additional information: I will use 2 styles... Windows XP and Win7.  Their respective sizes are 40 and 60 GB due to all applications for stable DR.  Data warehouses are ea 500 GB.

  Please let me know if additional information is necessary... Thank you!!!

  Charles

  No, unfortunately you cannot specify a folder like this.

  You'll have to do a

  $folder = get-file-name WinXP

  New-VM-$folder file...

  Remove the line of New - VM WhatIf switch if you really want to start creating virtual machines.

• options for the backup of virtual machines

  I intend to make regular backups of Backup Exec of my virtual machines as I normally would with a physical server.

  What other options do people use to make backups of their virtual machines?  I Imaging it has options of snapshot in vcenter, I could also take pictures on my SAN... anything else?

  VCB belongs to VMware, command line for most... There are a few 3rd tools part that you can watch that inspire the VCP, some add a GUI, they are expensive but one vRanger connection, look it up. Backup exec can work if you have installed the agent on the virtual computer, etc., but who receives only the files in the comments. Get a backup of the actual files that make up the virtual machine is a little more difficult... the VM must be suspended so to speak, in order to get a good backup files vmdk, etc, that's what can make the 3rd party tools.

  If you can not pass the dough, then search VCB. You will need to know some scripts, but there are tons of rescources here and there that can help you.

  I hope this helps.

  Jim

• Enable 3D Support box grayed out for Windows Server 2008 R2 vm, not for the Windows 7 virtual machine

  Hello

  IM wondering why the 3D feature is not available when I select Windows Server 2008 R2 as a type vm.

  For testing purposes, I have created a machine virtual 64-bit Windows 7 and the 3D box is not grayed out.

  I wonder why this is the case?

  Welcome to the community,

  3D support are not available for all guest operating systems. Please press the 'Help' button to find out what OS comments are supported.

  André

• Definition of reserves on the running JAVA Virtual machines

  I recently came across an overview of VMware performance that had a page essentially recommending reservations memory setting for the running Java virtual machines (see table). We have Java environments and did not have performance problems or complaints so, I doubt that I would implement any changes. However, I am curious to know if it's even a better practical recommendation, I could not put the date on the document so I wanted to see if someone had updated or current information for vSphere 4.X, 5.X environments.

  In General, we only use reservations memory to avoid the overhead administrative and operational increased. If we have never not a necessity, I prefer to use reservations to pool resources rather than granular level VM reservations.

  In my opinion, if you use the reservations are a regularity no exception in your environment, then you can use these rules.  That said, if you don't have no problem, I wouldn't change anything.  I've also linked a new document below.

  http://www.VMware.com/files/PDF/Techpaper/Enterprise-Java-applications-on-VMware-best-practices-guide.PDF

• looking for a little help with 'ownership' of a virtual machine

  Power surge through my apartment while he was working on a school project, (I know I know, im getting a smooth paste to the top soon!)

  Now the virtual machine I was working on the guard telling me that the virtual machine is already is use, which is not, asking if I want to take owenship and and use it anway. by clicking on confirm a get error message saying "cannot open the file 'I:\Virtual Machines\Windows 7\Windows 7.vmdk': insufficient permission to access file.»

  If anyone has a solution for this would be great!

  go to the directory of the virtual machine

  Delete all directories whose name .lck
  You can also find files whose name .lck - they must be removed as well

• How to list files in virtual machine?

  I have two hard drives on my Vmware host. There are virtual machines on a SATA drive, how can I list the files of virtual machines?

  Thank you!

  George

  You must locate your target VM data store and navigate from there. See attachment below:

  

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• How to prevent the appearance of "Failed to open Document" "Please check if you have read permissions for the file above.  This problem occurs when I try to convert a word in a PDF doc.

  How to prevent the appearance of "Failed to open Document" "Please check if you have read permissions for the file above? This problem occurs when I try to convert a word in a PDF doc.

  Hi [email protected] ,

  Please try to follow the steps mentioned in this thread with a similar problem: Impossible to open the document. Please check if you have read permissions for the above file.

  Also, let us know the acrobat version you have and the version of the OS on your system.

  Let us know if that helps.

  Concerning
  Sarojini

• Cannot open the document. Please check if you have read permissions for the file above.

  System:

  • Adobe Acrobat X Pro, 10.1.2
  • Windows 7 Enterprise, 32-bit
  • Badass de Core Quad CPU
  • 4 GB OF RAM
  • MS Word 2010 (Office 2010)

  I installed the latest version as an administrator and as an administrator. I have all the rights to all the files on the PC.

  When I try to create a PDF file from any Word document, if. DOC or. DOCX, I get an error window everytime:

  "Cannot open the document:

  "[document location]".

  'Please check if you have read permissions for the file above.'

  This occurs after the notice appears little "start of the application that created the document...". »

  If I open Word and create a PDF to the Ribbon, it works. It still only allows me to create from Acrobat.

  It creates a PDF file of Excel files, but not the DOC files. I looked for alternatives, but found nothing. I found that July 2011:

  "I have discovered Adobe support that it is a known problem with Office 2010 SP1 installed. It is news for someone of another encounter this problem, remove the SP1 and it will work ok. They said an update to fix this will be coming in the next quarter. »

  I have updated to the latest version 10.1.2 and I still have this problem.

  This is a major problem because it also fails on the batch conversions, which is what I really need for 100 or if the documents which must be PDFed. I'm not going to open each individual file and save each word.

  This is a KNOWN PROBLEM with Adobe, and if you look through the forums, you will find a lot of people having this problem, and so far, I have seen no solution.

  If anyone has found a solution, please report it here.

  Thank you!

  B

  Thus, the conversion does not work the first time if you remove the Normal.dotm? You have group policies that change your path models user (for Word) on a network drive?

• Write delay failed unable to save all the data for the file $Mft

  Have a frustrating problem.  Help is greatly appreciated.  Learned the hard way and lost a dwg important issue which was unrecoverable.  Bought a new drive external hard seagate.  Could not back up the entire system with software pre-installed.  Download acronis true image home 2011.  Tried to backup system.  Receive error when trying to backup messages; 'Delay to failure of Scripture; Reading of the sector; Windows was unable to save all the data for the file $Mft. The data has been lost.  Have tried many fixes.  Unable to disable write caching method (grayed out / unclickable).  Played regedit 'EnableOplocks' is not listed to select.  Attempted to run microsoft 'fix it' and got the blue screen of death.  Short hair out of my head.  Suggestions appreciated.

  I don't know where Microsoft 'Technical support engineers' get their information.

  Write caching without a doubt "does apply to external hard drives", but it is usually disabled to prevent to sort the problem you are experiencing.

  I've seen several positions reporting to the same question that you do.  All of these positions were with SATA drives.  Is your Seagate eSATA drive?

  The disc is recognized as an external drive in Device Manager?  In Device Manager, go to the drive properties dialog box and click the policies tab.  An external drive should have two options: "Optimize for quick removal" and "Optimize for performance".  An internal hard drive shows the options as gray (with 'performance' selected), but there should also be a checkbox "Enable disk write cache" under the second option.

  What shows in your policies tab?

  If I understand correctly, "writeback" or "write behind" is implemented by disc material or its pilot.  If the option is not available on the drive properties > policies tab, I would suggest to contact Seagate support.

• I set up ftp in iis for the file transfer. On the pc that I am currently in place I cannot transfer files to it via ftp. He says that the password is not accepted.

  FTP problem

  I set up ftp in iis for the file transfer.  On the pc that I am currently in place I cannot transfer files to it via ftp. He says that the password is not accepted.  When I look in the properties of the default ftp sites ftp I noticed that the Directory Security tab is not there as on the other pc.  How to return this tab or is it the windows software that's not fair.  I am running windows XP 2002 SP2 on it and I've updated to SP3.  I have no idea.

  Hello

  I suggest you to send your query to the link for assistance.

  http://forums.IIS.NET/

• Receive error message when you open Outlook; the path specified for the file G:\outlook...pst is not valid.

  I recently exported my outlook to a pst file and saved on my external hard drive.  Since then I get this message when I open Outlook "the path specified for the file G:\outlook...pst is not valid.  How to stop?

  NEVER use the. Functions of export/import PST in Outlook.  They are broken, have been for some time, data loss and often corrupt Outlook profile in use. To perform a backup, just close Outlook and make a COPY of the. PST file.  Looks like (and I guess here) your external HD is G:\. This being the case, that. PST file is probably still attached to Outlook and Outlook can't find it.  With Outlook open, see the supplement files pane. PST file, right-click, and then click "close".  You may need to have the hard drive external and exported. File PST attached and available for work.  If this does not work, you have damaged your profile and will need to make a new one:

  How to create and configure an e-mail profile in Outlook 2007 and in Outlook 2003

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• "Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?

  "Can not open AsIO.sys (2)" I get this message when I log in after a reboot.  I have search for the file, but can't find it with the research or the command prompt.  What do do in this file, and can be created and put into the appropriate folder?

  Hi Jack,

  This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.

  André
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/