POSSIBLE integration with vCAC 6.1

Similar Questions

• > > vFabric Director application integration with vCAC 5.2 as Cloud provider < <

  I'm testing vCAC 5.2. Every thing seems to work very well, but I have the problem with the integration with vFabric Application Director.

  I can successful integrate with vCloud Director, but not vFabric Application Director vCAC.

  "I get the following error message:" could not get possible values: java.security.cert.CertificateException: could not find a trusted certificate. "

  I don't know how to get around this.

  I have try the vcac FQDN, do not work.

  I try just IP address, do not work.

  Can you help me please?

  

  The problem was solved through the link give by Julie in vFabric Apllication Director communities.

  You will find how I solved it with screenshot in attachment document.

  http://communities.VMware.com/message/2254984#2254984

• Assignment of IP with vCAC external network profile

  I joined vCAC and NSX, and note that the Service Edge router that gets deployed on a blueprint multi-machine receives 2 IP addresses on its unique "uplink" profile external network interface.  Here is my setup and what is happening.  Any help to understand why this would be useful.  Not a huge deal because it is a learning laboratory, but when I go to implement it in a production environment, I need to know if this is expected behavior, or if something is wrong because it effectively reduces the number of possible networks to deploy-able by half.  Again, not a big problem as this "transport network" (the section between the Edge Gateway manually deployed and dynamic Service Edge routers) will exist entirely in the vSphere environment and can be as big as a class A network, if necessary, it is however a huge waste of space IP I want to solve it if possible.

  Topology:

  I have a NSX Edge and the virtual wire (switch NSX L2) already deployed in the environment.  Within vCAC I have:

  -a reserve related to the dvPortGroup created by the NSX L2 switch

  -an external network profile that is used to configure the port to uplink of dynamically deployed NSX routers edge of Service to connect to the LAN segment between the dynamic ESR and the switch of NSX Edge/L2, already deployed

  -a profile of NAT network 1 number which is used to configure the virtual machines deployed from vCAC plans

  -a vSphere vCAC VM blueprint pointing to a snapshot of a virtual computer within the environment vSphere (linked clone deployment)

  -a plan of multi-machine vCAC which contains the above plan and assigns a network interface to the virtual machine and using the profile of network NAT 1 to configure the IP settings on the virtual machine.  MM master plan contains only a single VM in order to test the dynamic creation of network and IP assignment features/integration between vCAC and NSX.

  Topology resulting, once the virtual computer is deployed:

  Edge (deployed manually) NSX gateway

  v

  v

  NSX L2 Switch/Virtual Wire (deployed manually

  v

  v

  NSX edge router Service (deployed as part of the deployment of the vCAC action plan)

  v

  v

  VM (deployed as part of the deployment of the vCAC action plan)

  In theory what needs to happen is that when I ask a resource of the Architecture SDSE MM:

  1. the ESR is deployed with 2 interfaces: 1 for the external network configured with an IP address available on the corresponding subnet and 1 for internal NAT network configured with the IP address of the default gateway is configured in the profile of NAT network.

  2 NAT rules and treatment of traffic are automatically configured in the ESR

  3. the virtual computer is deployed and configured with a NETWORK adapter with the configurations appropriate IP such as specified in the profile of NAT network.

  
  What is actually happening:
  1. the ESR gets deployed with 2 network cards; 1 NETWORK card for uplink to the external network, which gets 2 IP addresses on the subnet (instead of 1) 13 and 1 NIC for the default gateway of the NAT had network configured with the IP address of the NAT network default gateway.  Steps 2 and 3 still occur.

  Hi Jeremy,.

  It is the expected behavior. If you deploy an edge manually, you will be asked for a 'IP management', and then an IP address for the use of the uplink. It is the second IP source address. If you were to use a NAT, you get an additional IP address for each VM on the NAT's segment.

  See you soon,.

  Grant

• SX 20 integration with VCS

  Hello

  Is it possible to integrate 20 SX with VCS.

  Because our customer want to integrate with their MS Lync TP, so found that VCS can do this job. Then please suggest...

  Here also to point out that we are planing to use the public IP address for SX 20 to receive incoming calls from the public IP address, as it will be integrated with ISDN gateway.

  Details of the product for this solution:

  VCS

  SX 20

  TP ISDN Gateway

  Thanks in advance...

  Kind regards

  Daniele

  Yes, its possible, check this.

• OEDQ integration with Active Directory - disable SSL

  Hi mates,

  I just installed OEDQ (latest version) on a Unix machine (deployed on WebLogic Server 10.3.6) but I have a few concerns:

  • SSL communications -> is mandatory? I mean, I tried to expose dndirector via a Server Web Apache OHS admin page. I am able to access the page from admin in raw mode, but every time I try to access a specific feature (dashboard, user management, server configuration, etc.) I am redirected to https://< web-server-hostname >: < wls-server-ssl-port > / dndirector, if this is not what I expect. What's wrong? Moreover, if SSL is required, is there a way to expose the console via apache (avoiding any redirect)?
  • OEDQ with Active Directory -> documentation- OEDQ integration with Active Directory - covers just Single Sign-on configuration (on the two Windows/Unix os). What about a simple configuration pointing to an external ldap? The documentation States the following statement:

  It is also possible to configure OEDQ to work with servers of different directory for authentication of users and the identification of the user. For more information on the alternative configurations, "see"contact us" "

  So, how can I achieve this?

  Pointers?

  Thanks in advance,

  Marco

  Marco

  Here is an example configuration that can be used to integrate with AD.  Create a folder called Security in your Disqualification configuration directory, and save the file in this folder as login.properties.  There are a few supporinting of documentation online this process in aid of the Disqualification.

  Here is the file, I'll add a few notes below:

  realms                        = internal, adgss                           = false
  
  ad.realm                      = EXAMPLE.COMad.auth                       = ldapad.auth.bindmethod            = digest-md5ad.auth.binddn                = search: sAMAccountNamead.ldap.server                = dc.example.comad.ldap.auth                  = simplead.ldap.user                  = [email protected]                    = testad.ldap.profile               = adsldapad.ldap.prof.defaultusergroup = testgroupad.ldap.prof.useprimarygroup  = false
  

  The kingdoms line indicates that the 'internal' (Disqualification internal users such as dnadmin) Kingdom and the Kingdom of AD should be used.  Once you are satisfied with the integration of ads you can remove the internal domain and use AD exclusively.  The domain property sets the name of the field AD - here I used EXAMPLE.COM.

  The server property sets the DNS name of the AD server.  If omitted, it is looked up in the DNS.

  The lines of the user and pw are used to connect to AD Disqualification.

  The defaultusergroup line is the name of a LDAP group that contains all users who will use the Disqualification.  The default value for this is domain users that contains usually much too many users.

  Once it is setup and working, you can go to Setup user Disqualification and see a link to external groups that attach ad with Disqualification groups groups to assign permissions to users.

  I hope this helps.

  Richard

• ADF security integrated with DB user login

  Hello
  
  It is possible in fact a connection user interface integrated with a DB table to save users?
  Someone at - it a tutorial or something to read about it?
  
  I think that, with the guarantee of the ADF, only users cannot manage an interface were the user can change its own password or login name...
  I'm just editing XML.
  
  If I can at least see step 3 (using the LDAP protocol as the identity store) on my assistant as on this link:
  http://Biemond.blogspot.com/2008/12/using-WebLogic-provider-as.html
  
  Thanks in advance,
  Renan.
  
  Published by: RenanMC on 10/21/2009 06:42

  Hello

  Using LDAP? If it is clear DB tables, try this

  http://Biemond.blogspot.com/2008/12/using-database-tables-as-authentication.html

  Arun-

• Integration with non-Oracle EBS products

  I'm new to EBS (I try to install EBS for myself and also - I'm going through the documentation), and I'm trying to figure out is - it possible to Exchange data between modules of the EBS and non-Oracle applications. I found nice about Oracle API links, Biz adapters and so on and I'm going to study them, but when I'm looking on some specifice modules, then their sheets contatin very limited integration with non-Oracle, actually - I assume that they are carefully selected partners. Then - I wounder, I feel of the documentation that the EBS is fairly open and we can build anything on them or in their breast, but - now I have doubts about this.
  
  Well - from my experience as a developer Oracle-no, I know that data exchange is a fairly common task and it can be a big pluss for system, if its data and services are, for example exposed as web services for inclusion in the larger process and so on. EBS aims in different ways (for example to restrict the user from the bowels of EBS EBS-sphere modules)? Right now I'm doing some specifications and requirements for a research project and I'm confused if I include my software with EBS integration or not, perhaps such integration is impossible?
  
  Published by: user454720 on 2008.17.12 14:58

  Hello

  Open interfaces were for the main entities for a long time, for example for financial services - AP invoices, bank statements, receipts (Lockbox) etc.
  With release 12, there are several APIs / open Interfaces with the general move towards Web Services (although not yet here!)
  You can find "end points", etc. of the API/Open Interfaces to http://irep.oracle.com
  All them above are supported with your standard EBS Support license.

  When you hit something where it is not an open Interface or API, then you move into solutions not supported. All database entities are visible (IE. Open) and the majority of the code is open or extensible. Of course if write you / change any support then moves to your responsibility. Use as much as possible private API (for example the API of PL/SQL using forms).

  So, in addition to the customization and expansion using the standard tools of the EBS UI/backend (OFA, forms, reports, PL/SQL, discoverer, Workflow, etc.), I know of people who have a front-end for data EBS using Oracle APEX (HTMLDB), PHP, c# .net, etc. of the ADF.

  In short, you can do whatever you like exchanging data, but there are moments where you go not supported...

  Kind regards
  Gareth

• Integration with 50G

  Hello!

  Well, when I tried to compute the definite integral of | Sin x | I received the message cannot find the signin [0, 2 ft].

  

  I went in RPN mode, and this error persists. I then used [RS] [ENTER] to get the numeric result, and after awhile, I got the correct answer 4. But I can't get the answer simplely by clicking [EVAL].

  I also tried to calculate the antiderivative, and the correct answer returned Calculator -cos (x) * sign (sin (x)). I was wondering why the calculator produces an error when they apply for an accurate result (not digital, without .).

  Jack

  confirming the latest set of equations:

  

  EVAL would be = - 1

  and -> limit X PI - 0 = 1

  and the limit X-> PI = cannot determine.

  So, there's a singularity...

  Unfortunately, because of the resolution of the screen of 50 G, when the resulting equation for the indefinite integral is drawn, clear breaks in the plot IP and 2 * PI are not 100% clear.

  However, the subsequent calculations confirm that they exist.

  This is what has been shown that when the original integral from 0 to 2PI of | Sin (x) | is calculated,

  It is clear that the 50G automatically sets ON RIGOUREUX, even if it is not enabled in the (likely due to the function absolute value in the equation) indicators.

  THE rigorous is perfectly reasonably expect when the EXACT mode is selected with a function of absolute value.

  now for a pencil and paper method:

  | Sin (x) | is sin(x) from 0 to PI

  | Sin (x) | is - sin (x) IP to 2PI

  so...

  integral from 0 to 2PI of | Sin (x) | can also be expressed in

  integral from 0 to PI of Sin (x)

  +

  integral of the AP to 2PI of-sin (x)

  

  in EXACT MODE (strict mode setting is more questions)

  When EVAL would be = 4.

  I can refer you to a message done previously by Bernard Parisse (one of the developers of CASE).   Bernard said that the CASE cannot intercept all EXACT integration singularities (but it report some).

  Regarding the digital approximation method (help-> NUM) to get the result... I can't offer no answer as to the reason that the singularity is resolved.

  I've never seen a single post indicating what type of digital approximation algorithms are used for approximate integration with the 50G.  Of course, the digital approximation algorithms are distinguished by exact calculations.

  Finally, FYI, here is another good example of the use of 50G with an integral and having to use a bit of paper and pencil methodology (in this case, the method of cauchy principal value) to solve the 50G of the singularity.

  /T5/calculators/50g-numerical-integration-with-singularities/m-p/5678169#M11440

• Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe can be done if anything.

  Is there a work around to show the Site identity button when the integration with facebook like/send etc. It disappears when it comes to the page, it's because of the iframe

  What can be done if anything.

  Pages that use "mixed content" (parts of the use of the HTTP page and some use HTTPS) are not secure against tampering, they will not display the site identity button. To resolve this problem, make sure that external resources you are incorporation are available over HTTPS and you use HTTPS to nest them.

  For example, to iframe widgets like the Facebook 'Like' buttons, make sure that your iframe use src = "https://192.168.1.20 /...". »

  See also discussion here: http://stackoverflow.com/questions/3587021/facebook-like-button-breaks-https-ssl

• CRM integrated with MS Project Management

  Hi Expert,

  On the CRM integrated with MS Project Management, there any company always do this?

  In fact, there are only certain configurations or it's really complicated customization?

  The result of the integration is really effective and efficient?

  Can share with me the practice of MS Project to the planning of resources management?

  Thank you!

  Hello

  The question you posted would be bettersuited in the TechNet Forums. I would recommend posting your query in the TechNetForums for more assistance:

  http://social.technet.Microsoft.com/forums/da-DK/projectserver2010general/threads

• blue screen "possible problem with SPCMDCON. SYS

  all about office went< only="" program="" available="" and="" showing="" is="" mcafee=""> bed blue screen "possible problem with SPCMDCON. SYS '.  Hard drive reads accurately but very little available. Get pop up of the AV PROTECTION ONLINE DECLARING PAY 59.95 AND we will solve the problem. also the problem States is due KEYLOGGER ZEUS, please help

  Hello

  1. are you able to boot to the desktop?

  If you are able to boot to the desktop, run the antivirus scan and then run the System File Checker.

  Step 1: First we will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2: Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  (a) open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (b) type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If you are not able to boot to the desktop, please start the system in safe mode and follow the steps mentioned above.

• While freeing up disk space, I accidentally deleted MSOffice, which is integrated with my HP 1000

  While freeing up disk space, I accidentally deleted MS Office which is integrated with my laptop HP 1000. How to restore my MS Office 2010 Starter? HP predict that if the product is still in warranty period?

  I tried restoring the setting factory but without any real help. Please help me!

  Kind regards

  Ron

  Once Office Starter is removed there is no way to reinstall. Even make a system back to factory settings recovery will not reinstall it.

• Replacement of 6000 MXP Integrator with unique display. C40 SX20 vs?

  I have to make a quick decision and my CISCO sales representative is MIA :(

  We have a bunch of 6000 s MXP (package ingegrator), I would like to replace. They are simple installations with a single monitor on a roll integer grid.

  with output to the screen and a camera is there any point to spend the extra money for a C40 vs getting a SX20? From a point of view video capability they look pretty well. C40 more things gets me in the back, but it is a pretty simple setup.

  Just looking for what people here could do?

  Thank you!

  Although C40 and SX20 are two different solutions for videoconferencing from Cisco, an integrator (c40) and other is fast setting solution (SX20).

  The SX20 Quick Set is designed to provide multi-party and Conference video to high definition with the flexibility to adapt to various configurations - all at a value price and size of the room.

  C40 is for Integrator supports for integration with 3 party like crestron devices, mixers.

  two take in charge the premium 1080 p solution.

  both are excellent solutions and are mind blowing in the feature and the feature as compare to the MXP series.

  You can't go wrong with either.

• Integration with the PIX IDS firewall

  I read the Release Notes for Cisco Intrusion Detection System Sensor Version 3.0 S4 (1), and tripped on the new features of this version it pretends the integration with the PIX firewall

  How do implement you this? What kind of integration offer?

  Instructions for the sensor and the basic configuration of PIX can be found here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids8/13870_01.htm#xtocid23

  Instructions for sensor and PIX SSH configuration can be found here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids8/13870_01.htm#xtocid16

  You can configure the sensor to connect to the PIX via telnet when

  using the PIX inside interface, otherwise you have to use SSH.

  SSH with 3des encryption is supported in version 3.0 or later

  sensors for connections of PIX.

  Warning: If you use telnet with a version 6.2.1 or PIX more late or if

  you want to use SSH with encryption on any PIX, so you

  need a patch for your sensor. If so, open a case of TAC and demand

  the latest version of nr.managed engineering. Reference

  [email protected] / * / for any question.

• ACS integration with Microsoft Active Directory Services

  Hi all

  I was responsible for developing the integration of GBA with MS AD. What I want to know is below assuming I have a software ACS or ACS device and the authentication protocol's RADIUS

  -What is the criterion of the announcement to integrate with ACS to device software

  -Should that AD hosted on the domain controller or not?

  -Otherwise, on what (DC, tree, forest, branch, flower, Fruit) the announcement must be hosted on?

  -What should I do to authenticate users logging into Cisco ACS Security Manager integrated with AD?

  -Are there other dependencies that I'll have to speak categorically in my description?

  Thank you

  Rishi

  First of all, I love the flower fruit one keep it up.

  If ACS is for windows, it can be installed on the domain controller or member server. For detailed information about installation tasks post must have full integration, please see the following link that contains fancy things you are looking for:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/Windows/postin.html#wp1041202

  If ACS is soultion engine then you need piece of software called remote agent to be installed either on the domain controller or member server, also check the following link for more details on how to integrate it with AD:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/Rawi.html

  I hope this was informative for you.

  -----------------------------------------------------------------------------

  Please ensure good answers to rate