Possible malware of plane? Does not connect to AT & T in turn...

Similar Questions

• Canvio 3.0 does not connect and now won't turn on

  My Canvio 3.0 (1 t) worked very well.
  First used with an Inspiron 1501 with Win 7 32 bit, then with a new HP dv7 with Win 7 64 bit.

  A week ago, I plugged it, the laptop didn't see connected. I unplugged the power cord, reconnected it on both sides, the power came on and then went out. He didn't come back.

  I thought that the cable was messed up and I bought a new.
  Same behavior. Came to power, but HP has never seen connected.

  I tried to unplug and plug in again and now no power.

  Any ideas?

  Thank you.

  Hello

  Canvio 3.0 supports the USB 3.0 standard.
  The HDD must be connected to the USB 3.0 ports USB since USB 3.0 port provide about 900 my.

  The Canvio seems to be 2.0 compatible USB but USB 2.0 ports provide just 500mA and this could be too low, so if you use a USB 2.0 port, you must connect the Canvio USB ports using a Y USB cable that allows you to use 2 USB 2.0 ports

• Does not connect with the e-mail server after update.

  Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

  I use Thunderbird version 38.1.0.

  Thank you.

  The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

  Until the next problem...

• App-Manager does not connect to the Simulator OS Firefox on Windows 7

  OS: Windows 7

  Firefox: 28

  6.0pre8.20140112 Simulator 1.2 Firefox OS

  When I run the simulator it opens fine and I see a Firefox OS Desktop
  But the App Manager does not connect. The console at the bottom right says:

  .. localhost:56455 options (the port varies)

  .. connection timeout. Possible causes: has not clicked 'accept' (guest).

  .. .disconnecting

  .. .disconnected

  I have disabled my firewall, restarted firefox and even system - did not help
  There is a similar bug - but I don't know if we are talking about the same thing:
  https://support.Mozilla.org/en-us/questions/988385

  Thank you

  Well - I already knew these links and I can't find anything useful
  Anyway, I tried the Simulator instead of 1.2 1.3 (unstable)
  This one works very well

• 15 - r074TU: laptop does not connect to the router

  Day sum... .my laptop (model No. 15r074TU) with window 8.1 does not connect to the router that is D-link

  I uninstalled my driver reinstalled again, but it didn't work... even if I formatted my laptop, reconfigure the router and... done with all possible measures to overcome this problem, but have ultimately failed. Please suggest ways to tackle this problem as soon as possible...

  Follow the wizards in the following forum sticky and troubleshooting.

  http://h30434.www3.HP.com/T5/notebook-wireless-and-networking/common-fixes-for-wireless-connectivity-issues/m-p/4831601#M86871

• You cannot be activated because the iPad does not connect to the server

  You cannot be activated because the iPad does not connect to the server. I was told to come to the address in internet apple.com/es/support and do not see it as the solution. Can someone help me

  What is the wording accurate and complete error message?

  If she says the activation server cannot be reached/contacted

  There are 4 possible causes for this error message:

  1] activation server is actually down. Very rare and of short duration when it

  Sometimes. Solution - try again.

  [2] your firewall and/or antivirus software preventing the necessary connection. Solution-

  temporarily disable your firewall and/or antivirus software, up to the end of the activation.

  [3] computer used for activation has been used to jailbreak an iOS device in the past.

  Solution - use another computer.

  [4] iPad has been jailbroken. Your favorite search engine can provide indications but often prevent jailbreaks

  the activations/updates to succeed. By the terms of use of this forum, discussion on jailbroken iPad is

  prohibited.

• Satellite L300 - does not connect to wireless internet

  I have a satellite L300 (part No.: PSLB8A-0SN004) took me right back to the factory settings (out of box).

  I opened internet connections and all the usual wireless names were there.
  I tried hang my internet (wireless) home and tried several times, with the correct password, however it just does not connect.

  I tried to install the Realtek RTL8187B Wireless LAN driver both Atheros Wireless LAN Driver, but neither helped.

  The Wi - fi switch on the front is also in position to position IT. Please help I have to up my laptop up and running as soon as POSSIBLE.

  > I tried to install the Realtek RTL8187B Wireless LAN driver both Atheros Wireless LAN Driver, but neither helped.

  If the wireless network adapter is recognized in Device Manager, you n t need to install the WLan driver.
  In addition, you said that you can see the wireless networks available in your environment. This means that the WiFi is enabled and works

  I think that you should disable the WiFi settings (WEP, WPA, etc.) only for testing purposes and should try to connect the laptop to the network open, if possible, that means that you badly chosen encraption or the password.

• My new iPod does not connect to my 2006 iMac G5 - how to download all my music iTunes (mainly CDs) on my iPod. ?

  MY new iPod does not connect to my 2006 G5 iMac. How can I download my iTunes (music mainly from my own CD) library on my new iPod. My iMac works well, but running an ancient operating system that does not seem to be updated capable?

  This is not possible.  I don't know what specific iPod model you have, but any new iPod does not work with a Mac running Mac OS X 10.4.11 (and support older version of iTunes).

  There are more older models iPod work (you can buy used) and many of them, in my opinion, have GREAT sound quality.  To playback audio, new does not mean better.

• iPhoto does not connect to buy prints

  IPhoto does not connect to the server in order to buy prints and maps.  Is there a solution for this?

  There are 9 different versions of iPhoto and they run on 10 different versions of the operating system. Tips and tricks for dealing with issues vary depending on the version of iPhoto and the version of the operating system. In order to get help, you need to give as much information as possible. Include things like:

  -What version of iPhoto.

  -What version of the operating system.

  -Details. Full, a description of the problem as you can. For example, if you have a problem with export, then explain by describing how you try to export and so on.

  -History: Is it going hard? Everything has been installed or removed? -Are there any error messages?

  -Have what measures you already tried to solve the problem.

  -Something unusual on configure your? Or how you use iPhoto?

  Anything else you can think of that could help someone understand the problem you have.

• T60 RANDOMLY does not connect to the internet when you start

  One fine day this machine just stopped to connect to the Internet, either wired or wireless. I think it was a windows XP update that caused the problem

  Made it work again by loading the updated drivers:

  1.60 power management

  HotKey features - forget press release #, but he was later

  Login to 5.62

  Where possible I have uninstalled these files before installing the new versions

  Reinstalled the NIC drivers, noting that the most recent driver wireless is a not supports the network card in my T60 and decommissioning accordingly by the .txt file that accompanied the latest version

  Everything works, sort of.

  But if I stop and then perform a boot cold it does not connect (wired or wireless). When this happens, you know because at startup login manager tells me it could not connect. If I do a reboot it will connect (99% of the time).

  I can close the lid and go in standby mode (hibernation is disabled) and when he returns he will connect (if it linked before)

  And then sometimes even on a reboot it connects, but a subsequent reboot seems to work

  Any ideas?

  (1) what the order the drivers are loaded, and how I change that

  (2) could be a sign that the battery needs to be replaced?

  3) ??????

  Carlos

  Hi TmMny! Give a Kudo to Carlos! Click on the star to the left of his post.

  Carlos, if this really solves your problem, please click the "accept as Solution" at the bottom of your message.

  Thanks for finding this!

• I recently changed my ISP sky broadband and now my computer does not connect. Why is this?

  I tried all possible ways to connect this computer again to wide band wireless, but it does not connect. All other computers in the House connected without problem.

  Hi Joesafe,

  What exactly happens when you try to connect? You receive messages or error codes?

  You can read the article and try the steps to solve the problem:

  Windows wireless and wired network connection problems

  You can also get in touch with the broadband provider for help on the issue:

  http://helpforum.sky.com/

• My laptop does not connect to the internet. .

  My laptop does not connect to wireless internet.   All wireless drivers are in place, but it's like windows is be fooled into thinking that they are not there. A Trojan horse has been proposed, but I don't know what to do.  My ISP is also intrigued by this. Any suggestions would be welcome.

  Hello

  1. which browser is installed on the computer?

  2. do you get an error message?

  3. were there any changes (hardware or software) to the computer before the show?

  Method 1:  Perform the steps from the link below and see if it helps.

  Windows wireless and wired network connection problems 

  Method 2: Use the Microsoft Safety Scanner in full scan mode and remove all threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Hope this information helps.

• My laptop has not been used for a year and now does not connect to wireless internet?

  My wife's cell phone has recently been repaired (power Cable plug damage) and has been missing for a year. We both used my laptop which connects to the internet just fine. The laptop connects to the network but does not connect to the internet. I tried all suggestions that our Windows Diagnostics, as well as other ideas for myself but had no chance. The continuous diagnostic message to read "cannot communicate with primary DNS 194.168.4.100 server. My only thought is that perhaps because of the amount of time it has been used as the network driver can be updated, although I don't know how to upgrade without connecting to the net?

  Hello

  Follow the suggestions and then check:

  Method 1.

  Let us reset TCP/IP and check.
  To reset TCP/IP stack to go to this article and follow the instructions.
  http://support.Microsoft.com/kb/299357
  
  Method 2.
  Step 1.
  1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  2. make sure that you are in Setup-> basic configuration category.
  3. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
  4 enable DHCP if you want, you can change the number that starts the DHCP IP setting. (This is optional)
  5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  6. scroll and click 'Save Settings'.

  Step 2.
  1. click on start and then Control Panel.
  2. go to network and sharing Center and then click on change adapter settings.
  3. right click on the connection to the Local network and select Properties.
  4. Select Internet Protocol Version 6, and then click Properties.
  5. select Obtain DNS server automatically an address and press Ok.
  6. choose obtain an IP address automatically.
  7. repeat the steps for Internet Protocol version 4 as well.

  See also:

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems Using event logs Windows Network Diagnostics to troubleshoot network http://windows.microsoft.com/en-US/windows-vista/Using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

  Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

  You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.

• Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

  I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET