Possible sources of internal ArmStartTrigger to 6602

Hello

I use a card PCI-6602 in my application and I use all the input channels compared to 8 to count the edges of the PWM signals.

Everything works well except for one thing. It is essential that the counting of all 8 channels start at the same time.

I know that I should use the property 'ArmStartTrigger' of the respective channels to achieve. But I don't know what would be the best 'Source' for her.

As the measurement system is already on the client's site, it will be difficult to change/add hardware. That is, a single software solution is preferred.

The 6602 manual features: "relaxation of beginning of arm can be an internal or external signal.

What internal signals is available on the 6602?

Pouvez all this internal signal to solve my problem?

I know for example that a 6250 adapter can use "HERE/StartTrigger' as a command source to synchronize the analog input tasks with other duties. Is there something similar for the 6602?

Kind regards

Udo

The basic idea looks right.  I can't guarantee calls DAQmx c# syntax because I have a boy of LabVIEW, strictly, but I don't see anything that looks like his place.  I doubt that you need no waiting during the sequence and T - F time.  The material of the Board will be triggering a transition edge and calls via the software driver to change the State digital each will take probably a few microsec or more.

-Kevin P

Tags: NI Hardware

Similar Questions

  • Lost inventory - source probably empty, lost inventory, only empty because possible source

    I have a dell Powervault TL 2000 and it has the following error:

    Lost inventory - source probably empty, lost inventory, only empty because possible source
    Code: 8A 4 c

    Does anyone know what it is and how to fix (or troubleshoot)? I'm not familiar with this type of backup device.

    Help is appreciated

    Hello Bastiaan van Leeuwen,

    Yes, I can power cycle the TL & the host and see if the error is always subsequently watch.

    Please let us know if you have any other questions.

  • Is it possible to add internal storage second in computer laptop vn7 - 791 v nitro g?

    Hai, I want to know is possible to add the second drive in the system. Because I saw site acer toher, what would change portable version with the double storage 1 TB HDD + 256ssd.

    Yes, you have a complete HARD drive Bay in this version and a M2 (?) SSD, so if you take a pure SSD version, you can install a second HARD drive into the open Bay.

  • I moved the LR5 files by dragging them to a new location. Why the LR5 keep folders and files on the source drive internal Mac?

    my 1 TB drive iMac is full.  I bought a LaCie 3 TB external and moved from 2012 to 2014 to the new drive records.  I did carefully by renaming in year-mo-date__topic in the records of LR.   Then, I used LR5 to drag files in front of the Mac the LaCie external HD.   Successfully, everything installs and turns and usable LR5 since the 3 TB LaCie drive.  The Mac HD is no longer displayed in LR.  In Solution Explorer, I still have folders 2012, 2013 and 2014, but it is still consuming most of my internal drive.

    Why LR5 did move all files instead of what seems to be the copy?

    LR5 instant:

    screenshot406.jpg

    Snapshot of the Explorer:

    screenshot403.jpg

    Hello, on a Mac, it's Finder rather than explore...

    On a Mac, there is no movement when the transfer between discs only copies. It is a large safety factor so that accidents can be overcome for example a power failure during the transfer.

    All you need to do (after saving two disks) is to move files on your internal drive to the trash and empty it then. That will free up the space.

  • Satellite P305-S8832 - is second possible drive HARD internal

    Hello friends,

    I recently got a Toshiba Satellite P305-S8832, which came with a Toshiba 250 GB HARD drive.
    The machine has a second SATA slot. I opened it and Wow!

    A sata connector was there! As the cover of the location 'has 5 pins little stick down' I cut carefully and soft as a result of the borders so I was able to throw a WD SATA 250 GB HARD drive there. I was able to screw the cover in his position without problems at all.

    Now the second HD works perfectly as data storage.
    I moved all of my folders in C:/USERS to it. This way my drive C is dedicated only to the system, software, and the other (E) only for data. Just open and try! A WD SATA 320 GB 7200 RPM, would be an excellent option for this location.

    Thanks much for this information.
    It might be useful to other people here in the forum :D

    Greetings mate

  • Tecra S2 bluetooth internal module

    Where can I found out if it's possible to install internal bluetooth module PA3425U-1BTM on Tecra S2 model NUM. PTS20E-01W00MG3? Laptop was purchased in Europe (Slovenia)!

    P.S.: Where can I post a question for an expert... etc.

    Hello Korosec

    I found information that your laptop model is ready for the Bluetooth card. Bluetooth is not inside, but it can be built. I can't tell you that one fits your model, but you can contact the service in Slovenia partner and they can tell you that can be ordered.

  • Satellite A100-529: is - it possible to install WiFi miniPci card?

    I am a four-day-happy-user satellite a100-529. I wanted to know if it is possible to install internal mini-pci WiFi card on my laptop. I called three service providers different toshiba authorized in Poland and one of them told me that they do not know if it is possible, it is impossible and that it is possible (they have even told me the price for it).

    So I found myself alone, just confused. Can someone here help me on this?

    Hello

    I found the info Satellite A100-529 has no WiFi and LAN Wireless / WiFi is not extensible. I assume that there is no WLAN antenna inside. You can use the small key USB WiFi.

  • Edge counting and Source of Timing for timed loop on the request for Acquisition of data - not acquiring data on specified rising edge

    Operating system: Windows XP

    Hardware: PCI 6259

    Terminals used: PFI0 and PFI2

    Counters used: Ctr0 and Ctr1

    IM developing an application for the acquisition of data where timed loop synchronization source comes from my PFI2 (using the string A of an encoder).  IM basically trying to acquire data based on the number of ticks from my encoder.  For the synchronization source, I use counter 1 to capture the rising edge and have the loop time-acquisition of data.  At the same time, Im using the counter 0 to count the number of rising edges so I know exactly in what tick data was acquired.  PFI0 and PFI2 are connect to channel A of the encoder.

    Questions:

    Timed loop acquires data at each tick, because when I discover the data (text) file is missing count of my encoder value.  Is it because there is a limitation on the Windows operating system?  I used a noculars to measure the frequency at the maximum rotation of the channel encoder and 6,757 kHz.  All solutions?

    Also, is there anyway I can route the source channel internally an encoder to generate synchronization source instead of using another counter?  I have attached my VI.

    Hello

    All the samples that you acquire will be read by LabVIEW in a sequential manner. Figure 4-21 on the M-series on page 80 (4-34) shows that you will acquire all the samples you request all channels that you enjoy in sequentially.

  • 1173 program internal error

    I use Ultiboard 10.0.1. At the start of the automatic router, I get the following message: error while the Autorouter of preprocessing. Source: Autorouter internal program error 1173 what that means? Thank you, Gary

    Hello

    Thanks for the info. I did research more far and it seems that this error might be a flaw that has been fixed in version 10.1. If you continue to get the error, could you please send us your design for testing file? Send us an e-mail to [email protected].

    Thank you

  • When recording an audio source using beats there is always an annoying noise on want M4

    I want to m4, 3rd i7. Gen, 3.2, 8 Ram and beats audio on it. OS is Win 8, all drivers and SW updates are up-to-date.

    When I record any source as internal IDT MIC or stereo mix idt that the record is always of poor quality and reverb and metallic sounds, even when it's a recording internal and mic is disabled I use incliuded reforced his internla with WIN 8.

    I'm trying to pilot IDT rollback however is the one and only available at HP. I also tried a full installation with options preset, vain.

    Then I installed a new device from creative 24 bit gold USB external, but with the same results once the recording device is always fixed to use an IDT device, so the source of the error is the IDT device. I must say that for playback, it works poerfectly well and the problem is that during recording.

    As I am running out of ideas. I'd appreciate any help you can provide.

    Best regards

    Hi, thanks for your reply reactivated, I discovered a problem with the equalizer, he has been at high levels, so the recorded sound is distortioned. So, you just set the equalizer to porper levels and that's all.

  • ASA 5505 possibly interfere/blocking calls Incound UC560

    ASA 5505 interfering with incoming calls - Cisco - Spiceworks #entry - 5716462 #entry - 5716462

    All,

    We had this problem the phone when we lose connectivity for some reason any.  Here is an example:

    We have an ASA 5505 before our UC560.  Power lost to ASA (power connector from main Board loose) primary did identical backup with config.  The layout-design is the following:

    UC560<--->ASA 5505 Cisco IAD24523<--->(provider)<---WAN(3 bonded="">

    After the passage of the ASAs, incoming calls have been piecemeal.  I can see the traffic on the firewall when the calls log, nothing otherwise.   OS on the device are:

    UC560 - 15.0 XA (1r).

    ASA 5505-4, 0000 38

    Contacted the provider and after calls debugging support have been expire with the 408 SIP error.

    Release with support from Cisco and after debugging UC is to launch the SIP 487 disconnect error.

    So based on the above and the only variable being the ASA, I'm fairly certain that it is indeed the ASA.  Here is the config ASA (it's pretty long, sorry):

    Output of the command: "show run".

    : Saved
    :
    : Serial number:
    : Material: ASA5505, 512 MB RAM, 500 MHz Geode Processor
    :
    ASA 4,0000 Version 38
    !
    XXXXX-CA hostname
    activate the encrypted password of WUGxGkjzJJSPhT9N
    volatile xlate deny tcp any4 any4
    volatile xlate deny tcp any4 any6
    volatile xlate deny tcp any6 any4
    volatile xlate deny tcp any6 any6
    volatile xlate deny udp any4 any4 eq field
    volatile xlate deny udp any4 any6 eq field
    volatile xlate deny udp any6 any4 eq field
    volatile xlate deny udp any6 any6 eq field
    WUGxGkjzJJSPhT9N encrypted passwd
    names of
    DNS-guard
    192.168.254.1 mask - local 192.168.254.25 pool XXXXX-Remote IP 255.255.255.0
    !
    interface Ethernet0/0
    Description-> Internet
    switchport access vlan 2
    !
    interface Ethernet0/1
    Description-> inside
    switchport access vlan 10
    !
    interface Ethernet0/2
    !
    interface Ethernet0/3
    !
    interface Ethernet0/4
    !
    interface Ethernet0/5
    !
    interface Ethernet0/6
    !
    interface Ethernet0/7
    !
    interface Vlan1
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface Vlan2
    Description-> Internet<>
    nameif outside
    security-level 0
    address IP XXX.XXX. XXX.242 255.255.255.240
    !
    interface Vlan10
    nameif inside
    security-level 100
    IP 10.0.1.1 255.255.255.0
    !
    exec banner * W A R N I N G *.
    banner exec unauthorised access prohibited. All access is
    banner exec monitored and the intruder may be continued
    exec banner to the extent of the law.
    connection of the banner * W A R N I N G *.
    banner connect unauthorized access prohibited. All access is
    connection banner monitored, and intruders will be prosecuted
    connection banner to the extent of the law.
    Banner motd! ACCESS IS RESTRICTED TO AUTHORIZED PERSONNEL ONLY!
    Banner motd this is a private computer system.
    Banner motd, access is allowed only by authorized employees or agents of the
    company banner motd.
    Banner motd system can be used only for the authorized company.
    Banner motd business management approval is required for all access privileges.
    Banner motd, as this system is equipped with a safety system designed to prevent
    Banner motd and attempts of unauthorized access record.
    Banner motd
    Banner motd unauthorized access or use is a crime under the law.
    banner asdm XXXXX Enterprises Inc. $(hostname)
    boot system Disk0: / asa904-38 - k8.bin
    boot system Disk0: / asa904-29 - k8.bin
    passive FTP mode
    clock timezone PST - 8
    clock summer-time recurring PDT
    DNS domain-lookup outside
    permit same-security-traffic intra-interface
    object obj voip network
    10.1.1.0 subnet 255.255.255.0
    network object obj - 192.168.254.0


    192.168.254.0 subnet 255.255.255.0
    pool of local addresses of description
    object obj cue-network
    10.1.10.0 subnet 255.255.255.0
    object obj priv-network
    192.168.10.0 subnet 255.255.255.0
    object obj data network
    subnet 10.0.1.0 255.255.255.0
    network object obj - 192.168.0.0
    192.168.0.0 subnet 255.255.255.0
    Description not used
    network object obj - 192.168.1.0
    subnet 192.168.1.0 255.255.255.0
    Description not used
    object obj nj-asa-private-network
    Subnet 192.168.2.0 255.255.255.0
    network obj object -? asa-private-network
    192.168.5.0 subnet 255.255.255.0
    network obj object -? asa-private-network
    192.168.6.0 subnet 255.255.255.0
    network obj object -? -asa - private-network
    subnet 192.168.3.0 255.255.255.0
    network obj object -? asa-priv-networl
    subnet 192.168.4.0 255.255.255.0
    network obj object -? asa-private-network
    192.168.7.0 subnet 255.255.255.0
    object obj-asa-Interior-voip-nic network
    host 10.1.1.1
    network obj_any object
    subnet 0.0.0.0 0.0.0.0
    network obj_any-01 object
    subnet 0.0.0.0 0.0.0.0
    network object obj - 0.0.0.0
    host 0.0.0.0
    object obj-vpn-nic network
    Home 192.168.10.20
    object obj XXXX-asa-private-network
    192.168.8.0 subnet 255.255.255.0
    House of XXXX description
    network obj object -? asa-private-network
    192.168.9.0 subnet 255.255.255.0
    object asa inside-network data
    subnet 10.0.1.0 255.255.255.0
    asa data-outside-network object
    subnet XXX.XXX. XXX.240 255.255.255.240
    network of china-education-and-research-network-center object
    Home 202.194.158.191
    Acl explicitly blocked description
    China unicom shandong network item
    60.214.232.0 subnet 255.255.255.0
    Acl explicitly blocked description
    pbx-cue-Interior-nic network object
    Home 10.1.10.2
    pbx-cue-outside-nic network object
    host 10.1.10.1
    telepacific-voip-trunk network object
    Home 64.60.66.250
    Description is no longer used
    us-la-mianbaodianying network object
    Home 68.64.168.46
    Acl explicitly blocked description
    object network cue
    10.1.10.0 subnet 255.255.255.0
    private-network data object
    192.168.10.0 subnet 255.255.255.0
    pbx-outside-data-nic network object
    host 10.0.1.2
    pbx-voip-Interior-nic network object
    host 10.1.1.1
    voip network object
    10.1.1.0 subnet 255.255.255.0
    vpn-server-nic network object
    Home 192.168.10.20
    asa-data-outside-nic network object
    host XXX.XXX. XXX.242
    asa-voip-ctl-outside-nic network object
    host XXX.XXX. XXX.244
    the object 192.168.0.0 network
    192.168.0.0 subnet 255.255.255.0
    Description not used
    the object 192.168.1.0 network
    subnet 192.168.1.0 255.255.255.0
    Description not used
    nj-asa-priv-netowrk network object
    Subnet 192.168.2.0 255.255.255.0
    network of the 192.168.254.0 object
    192.168.254.0 subnet 255.255.255.0
    pool of local addresses of description
    network of the object? -asa - private-network
    subnet 192.168.3.0 255.255.255.0
    network of the object? asa-private-network
    subnet 192.168.4.0 255.255.255.0
    network of the object? asa-private-network
    192.168.5.0 subnet 255.255.255.0
    network of the object? asa-private-network
    192.168.6.0 subnet 255.255.255.0
    network of the object? asa-private-network
    192.168.7.0 subnet 255.255.255.0
    network of the object? asa-private-network
    192.168.9.0 subnet 255.255.255.0
    the XXXX-asa-private-network object network
    192.168.8.0 subnet 255.255.255.0
    network object XXX.XXX. XXX.242
    host XXX.XXX. XXX.242
    service object 47
    tcp source eq eq 47 47 destination service
    object network dvr
    Home 192.168.10.16
    network dvr-nat-tcp8888 object
    Home 192.168.10.16
    network dvr-nat-tcp6036 object
    Home 192.168.10.16
    network dvr-nat-udp6036 object
    Home 192.168.10.16
    dvr-8888 service object
    destination eq 8888 tcp service
    object-group Protocol TCPUDP
    object-protocol udp
    object-tcp protocol
    object-group service dvr-6036-tcp - udp
    port-object eq 6036
    détermine access-list extended allow object to ip pbx-outside-data-nic any4 inactive
    détermine access-list extended allow ip pbx-outside-data-nic inactive object any4
    access-list extended testout allowed ip object asa-voip-ctl-outside-nic any4 inactive
    access-list extended testout allowed ip any4 object asa-voip-ctl-outside-nic inactive
    XXXXX-Remote_splitTunnelAcl-list of allowed access standard 10.0.1.0 255.255.255.0
    XXXXX-Remote_splitTunnelAcl-list of allowed access standard 10.1.1.0 255.255.255.0
    XXXXX-Remote_splitTunnelAcl-list of allowed access standard 10.1.10.0 255.255.255.0
    XXXXX-Remote_splitTunnelAcl-list of allowed access standard 192.168.10.0 255.255.255.0
    inside_nat0_outbound list extended access permitted ip network voip 192.168.254.0 object
    inside_nat0_outbound list extended access permitted ip object cue-network 192.168.254.0
    inside_nat0_outbound list extended access permits data-private-network ip object 192.168.254.0 object
    inside_nat0_outbound list extended access permitted ip object asa-data-inside-network 192.168.254.0
    inside_nat0_outbound list extended access permitted ip voip-network 192.168.0.0 idle object
    inside_nat0_outbound list extended access permitted ip inactive cue-network 192.168.0.0 object
    inside_nat0_outbound list extended access allowed object data-private-network 192.168.0.0 inactive ip
    inside_nat0_outbound list extended access allowed object asa-data-inside-network 192.168.0.0 inactive ip
    inside_nat0_outbound list extended access permitted ip voip-network 192.168.1.0 idle object
    inside_nat0_outbound list extended access permitted ip inactive cue-network 192.168.1.0 object
    inside_nat0_outbound list extended access allowed object data-private-network 192.168.1.0 inactive ip
    inside_nat0_outbound list extended access allowed object asa-data-inside-network 192.168.1.0 inactive ip
    inside_nat0_outbound list extended access allowed object ip voip-network object nj-asa-priv-netowrk
    inside_nat0_outbound list extended access permitted ip cue-network object nj-asa-priv-netowrk object
    inside_nat0_outbound list extended access permitted ip object data-private-network nj-asa-priv-netowrk
    inside_nat0_outbound list extended access permitted ip object asa data-inside-network-nj-asa-priv-netowrk
    inside_nat0_outbound list extended access permitted ip cue-XXXX-asa-private-network network object
    inside_nat0_outbound extended access list permit ip object asa - Interior-data object XXXX-asa-private-network network
    inside_nat0_outbound list extended access permitted ip voip XXXX-asa-private-network network object
    inside_nat0_outbound list extended access allowed object of data-private-network ip XXXX-asa-private-network object
    ezvpn1 list standard access allowed 192.168.10.0 255.255.255.0
    ezvpn1 list standard access allowed 10.1.10.0 255.255.255.0
    ezvpn1 list standard access allowed 10.0.1.0 255.255.255.0
    ezvpn1 list standard access allowed 10.1.1.0 255.255.255.0
    ezvpn1 list standard access allowed 192.168.0.0 255.255.255.0
    ezvpn1 list standard access allowed 192.168.1.0 255.255.255.0
    ezvpn1 list standard access allowed 192.168.2.0 255.255.255.0
    ezvpn1 list standard access allowed 192.168.3.0 255.255.255.0
    ezvpn1 list standard access allowed 192.168.4.0 255.255.255.0
    ezvpn1 list standard access allowed 192.168.5.0 255.255.255.0
    ezvpn1 standard access list allow the 192.168.6.0 255.255.255.0
    ezvpn1 standard access list allow 192.168.7.0 255.255.255.0
    ezvpn1 standard access list allow 192.168.8.0 255.255.255.0
    ezvpn1 list standard access allowed 192.168.9.0 255.255.255.0
    access-list capout extended permitted udp object asa-data-outside-nic telepacific-voip-trunk inactive
    access-list capout extended permitted udp object telepacific-voip-trunk asa-data-outside-nic inactive
    allowed to capture access extended list ip pbx-cue-outside-nic object nj-asa-priv-netowrk
    allowed to capture access extended list ip pbx-cue-Interior-nic object nj-asa-priv-netowrk
    object capture allowed extended ip access list? object - asa-private-network pbx-cue-outside-nic
    object capture allowed extended ip access list? object - asa-private-network pbx-cue-Interior-nic
    capture extensive list ip pbx object nj-asa-priv-netowrk-cue-exterieur-nic object access permits
    capture extensive list ip pbx object nj-asa-priv-netowrk-cue-interieur-nic object access permits
    object capture allowed extended ip access list? object - asa-private-network pbx-cue-outside-nic
    object capture allowed extended ip access list? object - asa-private-network pbx-cue-Interior-nic
    ciscotest list extended access allowed host ip network voip 192.168.5.41 idle object
    access-list extended ciscotest allowed host 192.168.5.41 voip inactive ip network object
    ciscotest list extended access allowed host ip network voip 192.168.5.43 idle object
    access-list extended ciscotest allowed host 192.168.5.43 voip inactive ip network object
    access-list out_in note remote access attempted
    out_in list extended access deny ip object China unicom shandong network any4
    access-list out_in note remote access attempted
    out_in list extended access deny ip object we-the-mianbaodianying any4
    out_in list extended access deny SIP pbx-voip-Interior-nic EQ udp object china-education-and-research-network-center object
    out_in list extended access allow icmp any4 object vpn-server-nic
    out_in list extended access permitted tcp any4 pptp vpn-server-nic eq of object
    out_in list extended access permitted tcp any4 object vpn-server-nic eq 47
    out_in list extended access allow accord any4 object vpn-server-nic
    out_in list extended access allow icmp any4 object pbx-voip-Interior-nic
    out_in list extended access permitted udp any4 object pbx-voip-Interior-nic eq tftp
    out_in list extended access permitted tcp any4 object pbx-voip-Interior-nic eq h323
    out_in list extended access permitted udp any4 sip pbx-voip-Interior-nic eq of object
    Comment from out_in-HTTPS access outside the access list
    out_in list extended access permitted tcp any4 object data-private-network eq https
    outside_access_in list extended access allow icmp host 192.168.10.20 any4
    access-list extended outside_access_in permit tcp host 192.168.10.20 any4 eq pptp
    outside_access_in list extended access allowed host any4 object 47 192.168.10.20
    outside_access_in list extended access allow accord any4 host 192.168.10.20
    outside_access_in list extended access permit tcp any object dvr dvr-6036 object-group
    outside_access_in list extended access permit udp any object dvr dvr-6036 object-group
    outside_access_in list extended access allowed object dvr-8888 any object dvr
    outside_access_in list extended access allow icmp any4 host 10.1.1.1
    access-list extended outside_access_in permit udp host 10.1.1.1 any4 eq tftp
    access-list extended outside_access_in permit tcp host 10.1.1.1 any4 eq h323
    access-list allowed outside_access_in extended udp any4 host 10.1.1.1 eq sip
    go to list of access outside_access_in note incoming https.
    outside_access_in list extended access permitted tcp any4 192.168.10.0 255.255.255.0 eq https
    pager lines 24
    Enable logging
    exploitation forest-size of the buffer 1048576
    monitor debug logging
    debug logging in buffered memory
    asdm of logging of information
    address record [email protected] / * /
    exploitation forest-address recipient [email protected] / * / level of errors
    exploitation forest flash-bufferwrap
    No registration message 106015
    No message logging 313001
    No registration message 313008
    no logging message 106023
    No message logging 710003
    no logging message 106100
    No message logging 302015
    No message recording 302014
    No message logging 302013
    No message logging 302018
    No message logging 302017
    No message logging 302016
    No message logging 302021
    No message logging 302020
    destination of exports flow inside 192.168.10.20 4432
    Outside 1500 MTU
    Within 1500 MTU
    ICMP unreachable rate-limit 3 burst-size 1
    ICMP allow any response of echo outdoors
    ICMP allow any echo outdoors
    ICMP allow any inaccessible outside
    ICMP permitted host 75.140.0.86 outside
    ICMP allow any inside
    ASDM image disk0: / asdm-715 - 100.bin
    don't allow no asdm history
    ARP timeout 14400
    no permit-nonconnected arp
    NAT (inside, all) static source network-voip-obj obj-voip-network destination static obj - 192.168.254.0 obj - 192.168.254.0 no-proxy-arp-search to itinerary
    NAT (inside, all) static source network-cue-obj obj-cue-network destination static obj - 192.168.254.0 obj - 192.168.254.0 no-proxy-arp-search to itinerary
    NAT (inside, all) static source network-priv-obj obj-private-network destination static obj - 192.168.254.0 obj - 192.168.254.0 no-proxy-arp-search to itinerary
    NAT (inside, all) static obj-data-network-obj-network destination static obj - 192.168.254.0 obj - 192.168.254.0 no-proxy-arp-search to itinerary
    NAT (inside, all) static source network-voip-obj obj-voip-network destination static obj - 192.168.0.0 obj - 192.168.0.0 to route non-proxy-arp-search inactive
    NAT (inside, all) static source network-cue-obj obj-cue-network destination static obj - 192.168.0.0 obj - 192.168.0.0 to route non-proxy-arp-search inactive
    NAT (inside, all) static source network-priv-obj obj-private-network destination static obj - 192.168.0.0 obj - 192.168.0.0 to route non-proxy-arp-search inactive
    NAT (inside, all) static obj-data-network-obj-network source destination static obj - 192.168.0.0 obj - 192.168.0.0 to route non-proxy-arp-search inactive
    NAT (inside, all) static source network-voip-obj obj-voip-network destination static obj - 192.168.1.0 obj - 192.168.1.0 to route non-proxy-arp-search inactive
    NAT (inside, all) static source network-cue-obj obj-cue-network destination static obj - 192.168.1.0 obj - 192.168.1.0 to route non-proxy-arp-search inactive
    NAT (inside, all) static source network-priv-obj obj-private-network destination static obj - 192.168.1.0 obj - 192.168.1.0 to route non-proxy-arp-search inactive
    NAT (inside, all) static obj-data-network-obj-network source destination static obj - 192.168.1.0 obj - 192.168.1.0 to route non-proxy-arp-search inactive
    NAT (inside, all) static source network-voip-obj obj-voip-network destination static obj-nj-asa-private-network obj-nj-asa-private-network non-proxy-arp-search directions
    NAT (inside, all) static source network-cue-obj obj-cue-network destination static obj-nj-asa-private-network obj-nj-asa-private-network non-proxy-arp-search directions
    NAT (inside, all) static source network-priv-obj obj-private-network destination static obj-nj-asa-private-network obj-nj-asa-private-network non-proxy-arp-search directions
    NAT (inside, all) static obj-data-network-obj-network source destination static obj-nj-asa-private-network obj-nj-asa-private-network non-proxy-arp-search directions
    NAT (inside, all) static obj-data-network-obj-network destination static obj -? -asa - private - network obj -? -asa - private-network non-proxy-arp-route search
    NAT (inside, all) static source network-voip-obj obj-voip-network destination static obj -? -asa - private - network obj -? -asa - private-network non-proxy-arp-route search
    NAT (inside, all) static source network-cue-obj obj-cue-network destination static obj -? -asa - private - network obj -? -asa - private-network non-proxy-arp-route search
    NAT (inside, all) static source network-priv-obj obj-private-network destination static obj -? -asa - private - network obj -? -asa - private-network non-proxy-arp-route search
    static static obj obj-data-network-obj-network destination NAT (inside, all) source -? -asa-priv-networl obj -? -asa-priv-networl non-proxy-arp-route search
    static static obj obj-voip-network obj-voip-network destination NAT (inside, all) source -? -asa-priv-networl obj -? -asa-priv-networl non-proxy-arp-route search
    static static obj obj-cue-network obj-cue-network destination NAT (inside, all) source -? -asa-priv-networl obj -? -asa-priv-networl non-proxy-arp-route search
    static static obj obj-private-network obj-private-network destination NAT (inside, all) source -? -asa-priv-networl obj -? -asa-priv-networl non-proxy-arp-route search
    static static obj obj-cue-network obj-cue-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    static static obj obj-data-network-obj-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    static static obj obj-voip-network obj-voip-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    static static obj obj-private-network obj-private-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    static static obj obj-data-network-obj-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    static static obj obj-voip-network obj-voip-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    static static obj obj-cue-network obj-cue-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    static static obj obj-private-network obj-private-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    static static obj obj-data-network-obj-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    static static obj obj-voip-network obj-voip-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    static static obj obj-cue-network obj-cue-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    static static obj obj-private-network obj-private-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    NAT (inside, all) static obj-data-network-obj-network source destination static obj-XXXX-asa-private-network obj-XXXX-asa-private-network non-proxy-arp-search directions
    NAT (inside, all) static source network-voip-obj obj-voip-network destination static obj-XXXX-asa-private-network obj-XXXX-asa-private-network non-proxy-arp-search directions
    NAT (inside, all) static source network-cue-obj obj-cue-network destination static obj-XXXX-asa-private-network obj-XXXX-asa-private-network non-proxy-arp-search directions
    NAT (inside, all) static source network-priv-obj obj-private-network destination static obj-XXXX-asa-private-network obj-XXXX-asa-private-network non-proxy-arp-search directions
    static static obj obj-data-network-obj-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    static static obj obj-voip-network obj-voip-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    static static obj obj-cue-network obj-cue-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    static static obj obj-private-network obj-private-network destination NAT (inside, all) source -? obj - asa-private-network -? -asa-private-network non-proxy-arp-route search
    !
    object obj-asa-Interior-voip-nic network
    NAT XXX.XXX static (inside, outside). XXX.244
    network obj_any object
    NAT dynamic interface (indoor, outdoor)
    network obj_any-01 object
    NAT (inside, outside) dynamic obj - 0.0.0.0
    object obj-vpn-nic network
    NAT XXX.XXX static (inside, outside). XXX.254
    network dvr-nat-tcp8888 object
    NAT (inside, outside) interface static 8888 8888 tcp service
    network dvr-nat-tcp6036 object
    NAT (inside, outside) interface static 6036 6036 tcp service
    network dvr-nat-udp6036 object
    NAT (inside, outside) interface static service udp 6036 6036
    Access-group outside_access_in in interface outside
    Route outside 0.0.0.0 0.0.0.0 XXX.XXX. XXX.241 1
    Route inside 10.1.1.0 255.255.255.0 10.0.1.2 1
    Route inside 10.1.10.0 255.255.255.252 10.0.1.2 1
    Route inside 192.168.10.0 255.255.255.0 10.0.1.2 1
    Timeout xlate 03:00
    Pat-xlate timeout 0:00:30
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    Floating conn timeout 0:00:00
    dynamic-access-policy-registration DfltAccessPolicy
    identity of the user by default-domain LOCAL
    the ssh LOCAL console AAA authentication
    AAA authentication http LOCAL console
    AAA authentication enable LOCAL console
    LOCAL AAA authentication serial console
    AAA authentication LOCAL telnet console
    Enable http server
    http 192.168.10.0 255.255.255.0 inside
    http 10.0.1.0 255.255.255.0 inside
    http 192.168.254.0 255.255.255.0 inside
    http 0.0.0.0 0.0.0.0 outdoors
    authentication & encryption v3 private Server SNMP group
    SNMP server group No_Authentication_No_Encryption v3 /noauth
    SNMP-server host inside the 192.168.10.20 community *.
    Server SNMP Ontario, CA location
    SNMP Server contact [email protected] / * /
    Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
    Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
    Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
    Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
    Crypto ipsec pmtu aging infinite - the security association
    crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
    Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256

    -MD5-ESP-3DES-MD5 ESP-3DES-SHA SHA-DES-ESP ESP - THE - MD5
    Crypto dynamic-map myDYN-card 5 set transform-set ESP-DES-MD5 ikev1
    outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
    outside_map interface card crypto outside
    dynamic crypto isakmp 65535 ipsec myDYN-map myMAP map
    Crypto ca trustpoint CAP-RTP-001_trustpoint
    Terminal registration
    Configure CRL
    Crypto ca trustpoint CAP-RTP-002_trustpoint
    Terminal registration
    Configure CRL
    Crypto ca trustpoint _internal_ctl_phoneproxy_file_SAST_0
    registration auto
    full domain name no
    name of the object cn = "_internal_ctl_phoneproxy_file_SAST_0"; UO = "STG"; o = "Cisco Inc."
    _internal_ctl_phoneproxy_file_SAST_0 key pair
    Configure CRL
    Crypto ca trustpoint _internal_ctl_phoneproxy_file_SAST_1
    registration auto
    full domain name no
    name of the object cn = "_internal_ctl_phoneproxy_file_SAST_1"; UO = "STG"; o = "Cisco Inc."
    _internal_ctl_phoneproxy_file_SAST_1 key pair
    Configure CRL
    Crypto ca trustpoint _internal_PP_ctl_phoneproxy_file
    registration auto
    full domain name no
    name of the object cn = "_internal_PP_ctl_phoneproxy_file"; UO = "STG"; o = "Cisco Inc."
    _internal_PP_ctl_phoneproxy_file key pair
    Configure CRL
    Crypto ca trustpoint Cisco-Mfg-CA
    Terminal registration
    Configure CRL
    Crypto ca trustpoint phoneproxy_trustpoint
    registration auto
    full domain name XXXXXXXXXX.com
    name of the object CN = XXXXXX - ASA
    phoneproxy_trustpoint key pair
    Configure CRL
    trustpool crypto ca policy
    string encryption CAP-RTP-001_trustpoint ca certificates
    certificate ca 7612f960153d6f9f4e42202032b72356
    quit smoking
    string encryption CAP-RTP-002_trustpoint ca certificates
    certificate ca 353fb24bd70f14a346c1f3a9ac725675
    quit smoking
    Crypto ca certificate chain _internal_ctl_phoneproxy_file_SAST_0
    certificate e1aee24c
    CA
    quit smoking
    Crypto ca certificate chain _internal_ctl_phoneproxy_file_SAST_1
    certificate e4aee24c
    quit smoking
    Crypto ca certificate chain _internal_PP_ctl_phoneproxy_file
    certificate e8aee24c
    quit smoking
    a string of ca crypto Cisco-Mfg-CA certificates
    certificate ca 6a6967b3000000000003
    quit smoking
    Crypto ca certificate chain phoneproxy_trustpoint
    certificate 83cbe64c
    quit smoking
    Crypto ikev1 allow outside
    IKEv1 crypto policy 5
    preshared authentication
    the Encryption
    md5 hash
    Group 2
    life 86400
    IKEv1 crypto policy 10
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    Telnet timeout 5
    SSH 10.0.1.0 255.255.255.0 inside
    SSH 0.0.0.0 0.0.0.0 inside
    SSH timeout 60
    Console timeout 0
    management-access inside

    priority-queue outdoors
    TX-ring-limit of 256
    !
    maximum-session TLS-proxy 24
    !
    !
    TLS-proxy tls_proxy
    _internal_PP_ctl_phoneproxy_file point server trust
    CTL-file ctl_phoneproxy_file
    file-entry cucm-tftp trustpoint phoneproxy_trustpoint address 73.200.75.244
    !
    Media-termination asdm_media_termination
    address XXX.XXX. XXX.245 outside interface
    address interface inside 10.0.1.245

    !
    Phone-proxy asdm_phone_proxy
    Media-termination asdm_media_termination
    interface address 10.1.1.1 TFTP server on the inside
    TLS-proxy tls_proxy
    no settings disable service
    XXX.XXX proxy server address. Outside the xxx.242 80 interface
    a basic threat threat detection
    threat detection statistics
    a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
    NTP server 192.168.10.60 source inside
    internal group myGROUP strategy
    Group myGROUP policy attributes
    VPN-idle-timeout no
    VPN-session-timeout no
    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list ezvpn1
    allow to NEM
    XXXXX group policy / internal remote
    attributes of group XXXXX policy / remote
    Ikev1 VPN-tunnel-Protocol
    Split-tunnel-policy tunnelspecified
    Split-tunnel-network-list value XXXXX-Remote_splitTunnelAcl
    fstorm encrypted EICAA5sjaiU.vh05 privilege 15 password username
    username fstorm attributes
    type of remote access service
    username password encrypted PPfytzRN94JBZlXh privilege 0 ciscotac
    username cisco password encrypted privilege 15 omWHH15zt6aLxWSr
    attributes username cisco
    type of remote access service
    username XXXXXu8 encrypted password rmZe1Ee0HeReQn6N
    username XXXXXu8 attributes
    type of remote access service
    username password uniadmin G72KWXo/GsACJLJ7 encrypted privilege 15
    username XXXXXU1 encrypted password privilege 0 rmZe1Ee0HeReQn6N
    username XXXXXU1 attributes
    Strategy Group-VPN-XXXXX / remote
    type of remote access service
    username XXXXXu3 encrypted password rmZe1Ee0HeReQn6N
    username XXXXXu3 attributes
    type of remote access service
    username XXXXXu2 encrypted password rmZe1Ee0HeReQn6N
    username XXXXXu2 attributes
    type of remote access service
    username XXXXXu5 encrypted password rmZe1Ee0HeReQn6N
    username XXXXXu5 attributes
    type of remote access service
    username XXXXXu4 encrypted password rmZe1Ee0HeReQn6N
    username XXXXXu4 attributes
    type of remote access service
    username XXXXXu7 encrypted password rmZe1Ee0HeReQn6N
    username XXXXXu7 attributes
    type of remote access service
    username XXXXXu6 encrypted password rmZe1Ee0HeReQn6N
    username XXXXXu6 attributes
    type of remote access service
    tunnel-group XXXXX type remote access / remote
    attributes global-tunnel-group XXXXX / remote
    XXXXX address pool / remote
    Group Policy - by default-XXXXX / remote
    IPSec-attributes tunnel-group XXXXX / remote
    IKEv1 pre-shared-key *.
    type tunnel-group mytunnel remote access
    tunnel-group mytunnel General-attributes
    strategy - by default-group myGROUP
    mytunnel group of tunnel ipsec-attributes
    IKEv1 pre-shared-key *.
    !
    class-card CM-VOICE-SIGNAL
    match dscp af31
    class-map-outside-phoneproxy
    match eq 2443 tcp port
    class-map inspection_default
    match default-inspection-traffic
    Class-map data
    match flow ip destination-address
    match tunnel-group mytunnel
    class-card CM-VOICE
    match dscp ef
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 1024
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect esmtp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the sip
    inspect the netbios
    inspect the tftp
    Review the ip options
    inspect the pptp
    inspect the icmp
    class class by default
    Statistical accounting of user
    flow-export-type of event all 192.168.10.20 destination
    outside-policy policy-map
    class outside-phoneproxy
    inspect the thin phone-proxy asdm_phone_proxy
    CM-VOICE class
    priority
    CM-VOICE-SIGNAL class
    priority
    World-Policy policy-map
    !
    global service-policy global_policy
    207.46.163.138 SMTP server
    context of prompt hostname
    no remote anonymous reporting call
    call-home
    Profile of CiscoTAC-1
    no active account
    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
    email address of destination [email protected] / * /
    destination-mode http transport
    Subscribe to alert-group diagnosis
    Subscribe to alert-group environment
    Subscribe to alert-group monthly periodic inventory
    monthly periodicals to subscribe to alert-group configuration
    daily periodic subscribe to alert-group telemetry
    HPM topN enable
    Cryptochecksum:8bb3014c2a6deba7c80e5f897b3d34cb
    : end

    If someone could give a clue as to what could be the problem, I would appreciate it.

    / / / / o ? 0:o); ++ rc; c ++) a [c] .apply (i, r); var s = f [g [n]]; {return s & s.push ([m, n, r, i]), I} function p (e, t) {[e] w = l (e) .concat (t)} function l (e) {return [e] w |} []} function d (e) {return s [e] [e] s =: o (n)} function v (e, t) {c (e, function (e, n) {t = t |})} "" featured ", g [n] = t, f t | (f[t]=[])})} var w = {,} g = {}, m = {on: p, emit: n, get: d, listeners: l, context: t, buffer: v}; "return m} function i() {return new r} var a ='[email protected] / * /', u = e ("GDS"), (2) c = e, f is {}, s = {}, p is t.exports = o (); [p.backlog = f}, {}], gos: [function (e, t, n) {function r (e, t, n) {if (o.call (e, t)) e [t] return; var r = n (); if (Object.defineProperty & Object.keys) try {return Object.defineProperty (e t, {value: r, available in writing:! 0, countable:! 1}), r} catch (i) {return [t] = r, r e} var o = Object.prototype.hasOwnProperty; t.exports = r}, {}], handle: [function (e, t, n) {function r (e, t, n [{(, r) {o.buffer([e],r), o.emit(e,t,n)} var o = e("ee").get ("handle"); t.exports = r, r.ee = o}, {}], id: [function (e, t, n) {function r (e) {var t = typeof e; return! e |}}] "(» Object"!==t&&"function"!==t?-1:e===Window?0:a(e,i,Function() {return o ++})} var o = 1, I = "[email protected] / * /', a = e ("gos"); [t.exports = r}, {}], charger: [function (e, t, n) {function r() {if(!w++) {var e = v.info = NREUM.info, t = s.getElementsByTagName ("script") [0]; if(e&&e.licenseKey&&e.applicationID&&t) {c (l, function (t, n) {[t] e |})}}}}] (e [t] = n)}) ; var n = "https" = p.split (":") [0] | e.sslForHttp; v.proto = n? ([' https://":"http://",u("Mark",["OnLoad",a ()], null,"api"); var r = s.createElement ("script");r.src=v.proto+e.agent,t.parentNode.insertBefore(r,t)}}} function o() {"complete" = s.readyState & i ()} function i() {u ("mark", ["domContent", a ()], null, "api")} function a() {return (new Date) .getTime ()} var u = e ('handful'), c = e (2), f = window, s = f.document; NREUM.o = {ST:setTimeout, CT:clearTimeout, XHR:f.XMLHttpRequest, REQ:f.Request, EV:f.Event, PR:f.Promise, MO:f.MutationObserver}, e (1); var p=""+location,l={beacon:"bam.nr-data.net",errorBeacon:"bam.nr-data.net",agent:"js-agent.newrelic.com/nr-918.min.js"},d=window. XMLHttpRequest&&XMLHttpRequest.prototype&&XMLHttpRequest.prototype.addEventListener&&!/CriOS/.test (navigator.userAgent), v = t.exports = {offset: a (), original: p, features: {}, xhrWrappable:d}; s.addEventListener? (s.addEventListener("DOMContentLoaded",i,!1),f.addEventListener("load",r,!1)):(s.attachEvent("onreadystatechange",o),f.attachEvent("onload",r)),u("mark",["firstbyte",a ()], null, "api"); ({[var w = 0}, {}]}, {}, ["loader"]); // ]]> // // //

    Glad you were able to solve the problem! Also, thank you for taking the time to come back and post the solution here (+ 5 from me)!

    Now, given that your issue is resolved, you must mark the thread as "answered" :)

    Thank you for evaluating useful messages!

  • Discovers the connection Broker (the same external and internal DNS) URL

    I am trying to determine if its possible to connect internal broker who resolves internal view.compay.com (10.1.1.10) and say a security server located in the DMZ that resolves itself into view.company com (199.10.10.10).  Is it possible to keep this view.company.com for both?  At the moment we just solve internally to desktops.company.com, but I am trying to determine how it would be possible to use the same in both.

    You can have the will of the URL to the same name.    We have our internal DNS pointing to the name company.view.com and then from outside company.view.com resolves to our security server.

  • Address conflict IP TC and iMac

    Is back from vacay to an IP conflict on my mid 2007 iMac error message. My TC Airport caught the iMac IP and will not let go. Any other device on the network wireless can enter an IP address. We have AppleTV, iPhone, iPad, even a G5 which are humming and I'm dead in the water. Cannot use a static IP address to circumvent the problem, as I previously for other problems. I'm under El captain now 10.11.5 I rebooted all dozens of times, even deleted my AirPort Extreme Extender to eliminate as a possible source of problems. My ISP don't touch anything Macintosh, but they confirmed with other devices running, it must be the iMac. I tried to change the password on the TC so that any unauthorized connection would fall, but failed. Do I have to reset the TC? If I do I will lose my backups? The iMac and the G5 were both using the TC for backups.

    My TC Airport caught the iMac IP and will not let go.

    Try the following to release and refresh the IP address provided to your iMac to the Time Capsule (TC):

    • System Preferences > network > Wi - Fi > advanced > TCP/IP tab
    • Note the value for the IPv4 address
    • Click on the button "renew the DHCP lease.
    • Again, check the value of the IPv4. It changed?

    You should not have to reset the TC to solve this problem... but if you do, any of the types of discount to zero (soft, hard, or default) will erase all the data on the internal drive of the TC or any drive connected to its USB port.

  • Who to back up data from USB airport

    Hello everyone,

    I have an older version of Airport Extreme (7.6.4 firmware version) that has a USB drive connected as a fileshare storage device. Now, I'm looking for a good concept of backup files stored on the USB - stick.

    Are there suggestions, how these files within the USB stick file system can be backed up to another another drive?

    Is it possible to include the Airport extreme network shares in a local machine to a Mac attached Time backup?

    Kind regards

    Volker

    I have an older version of Airport Extreme (7.6.4 firmware version) that has a USB drive connected as a fileshare storage device. Now, I'm looking for a good concept of backup files stored on the USB - stick.

    Are there suggestions, how these files within the USB stick file system can be backed up to another another drive?

    You must use a program that backs up network drives. Such a program would be Carbon Copy Cloner.

    Is it possible to include the Airport extreme network shares in a local machine to a Mac attached Time backup?

    Sorry, but no. Time Machine can back up only of the following sources:

    • Internal hard drive to the Mac
    • An external drive connected directly to a Mac.
  • Best backup

    Dear Sir, now a specific question on the data backup: I use syncback and back-up for another internal hard drive
    so far no probs. now that is it when a stormy wheather arrives and sends a flashlight in your home: how to protect against it.
    is - that someone knows a solution?
    Thanks in advance

    Hello
    I would recommend that a power surge protected outlet, even if your laptop will use a power transformer when it is connected to your AC so it is more likely that the transformer would be damaged in the event of lightning or other overvoltage.

    The other area of concern would be your connection to broadband or Modem which is another possible source of damage caused by lightning. I would say a microfilter ADSL of good quality at a minimum, even if personally I would disconnect completely during an electrical storm.

    HTH

Maybe you are looking for

  • My drop down menu changed search bar

    Everything I see that I get help on the search bar in the upper right corner shows the emblem of a little search engine. I don't have much, and I can't get it back. Worse still, when I start typing, I search point that I must now address a long list

  • Portege M400 - how to remove the Protector Suite fingerprint data

    Hi all (1) Protector Suite 5.4 sometimes generated a crash of Windows XP on my Portege M400. (2) I followed the suggestion of WinXP and upgraded to version 5.8. Unfortunately, this way I lost the automatic access features to Web sites protected by (t

  • I can't download/upgrade to El Capitan

    I'd like to update to El Capitan, however, it is not allow me. MacBook Air early 2015 Currently on OS X Yosemite 10.10.5 Processor: Intel Core i5 to 1.6 GHz Memory 4 GB The App Store says I have no new update available.  The banner of El Capitan in t

  • How do I enter the computer registers

    I look at using Labview Realtime on a car PC. The embedded PC's GPIO ports mapped to an address register. In this case 0 x 0284. First 4 Bits are output, 4 second are entered, How to read and write fron this fixed the registry. If I wrote the Code C

  • PNTools virtualization

    All the virtualized world PNTools and have been successful (i.e. using App - V)?  Our enforcement team is trying to extract the BONES as clean as possible (we use SCCM to build desktop computers) and I was wondering if we could virtualize PNTools. Th