Potential security breach: (Audio)? Relayed by the customer between two periods of external investigation of data

Similar Questions

• Take the time between two values

  Hi people,

  I have a problem and I know idea how to solve... I need help.

  The problem is I want to take the time between two values max as you can see in the chart.

  For example, in the image that I have add

  4.5 - 1 840 = 2.66

  And enter this value in the 'time between mostra '.

  It's that I want...

  But what I think is very complicated, because I don't know how to take the time correctly and does remove...

  Thank you very much

  Any solution?

  Hi jocuma,

  I tried something and hope that helps u.

  Just create two arrays of temperature and voltage. First of all, I'll get the value of the voltage when it is more of a certain value and that same index to get the value of time and store in the shift register.

  When I get the second higher than the limit value, I'll get time and subtract the previous value.

• Measure the time between two digital pulse

  Hello

  For a non-critical calendar application, I need to measure the time interval between consecutive TTL pulses, ranging from the order of 0.5 s for a few seconds, with a low accuracy of +/-10-50ms. The interval being measured varies between the rising edge of the first pulse and the front of the next and so on.

  I have several input lines I need to deal with. Because it's a critical machination low cost, I don't want to use digital counters for each line, so I work with an acquisition of data USB6008 and have connected the input rows TTL on the digital inputs of the device. Avoiding will be sufficient.

  I found a good example of VI on discussion forums that does almost the same thing, only it uses instead of the DAQ Assistant user input. The VI works including the time the program going on in a while loop. I replaced with the DAQ Assistant output (a channel) user input in the hope that it is still work.

  

  When I run the program in "run once" mode, it seems to work perfectly. However, in "continuous run" it measures only a very small interval, probably just the time between two samples.  I think it has something to do with the help of a while loop in combination with the DAQ Assistant. Anyone who has any suggestions how to solve this problem?

  Thank you!

  OK... first of all, you should never use the button "run continuously.  I wish that NEITHER would be to eliminate it, but told me that it is sometimes useful for debugging.  If you want your program to run over and over again, use a while loop with a stop"" button.

  If I'm reading your code correctly, you make your initial moment, and then collect data from data acquisition.  When one of the channels is "T", you stop your loop and the end time of capture.  (By the way, why you convert your table to a cluster?  Why not just index the appropriate channel in the table directly?)

  Since you want to capture the time between two consecutive pulses, you need to know when a transition has occurred... i. e when your digital line went from F (no pulse) to T (pulse start).  This will give you your forehead.  Right now, all you're doing is looking for a value T - so you have no way of knowing if you are looking for to the previous impulse again, or a new impetus.  You also burn 100% of your processor with the way you have your programme in place.

  You need a small loop delay so that your VI is not 100% of your hogs CPU time.  Given that you can live with an accuracy of 50msec, what I suggest that you use.

  See attached picture for you give an idea of how to implement.  He will probably need some refining operations, but it should point you in the right direction.

  

  I hope this helps.

• Regular expression help please. (extraction of a subset of the string between two markers)

  I haven't used regular expressions before, and I can't find a regular expression to extract a subset of the string between two markers.

  The chain;

  Stuff of header I want
  Stuff of header I want
  Stuff of header I want

  Stuff of header I want
  Stuff of header I want
  Stuff of header I want

  6 ERRORS
                       
  Info I want to line 1
  Info I want line 2
  Info I want line 3
  Info I want to line 4
  Info I want to line 5
  Info I want line 6
  END_ERRORS

  From the string above (it is read from a text file), I try to extract the subset of string between ERRORS 6 and END_ERRORS. The number of errors (6 in this case) can be any number from 1 to 32, and the number of lines I want to extract will correspond with this number. I can provide this number of a caller VI if necessary.

  My current solution, which works, but is not very elegant;

  (1) using Match Regular Expression for the return of the string after you have synchronized the 6 ERRORS

  (2) uses the Regular Expression matches to return all characters before game END_ERRORS of the string returned by (1)

  Is there a way this can be accomplished using 1 Regular Expression Match? If so someone could suggest how, as well as an explanation of the work of the given regular expression.

  Thank you very much

  Alan
  

  

  I used a character class to catch any word or whitespace characters.  This put inside parentheses a substring matching the criteria that you can get by developing the node for regular expression matching.  The \d matches the numbers and the two * s repetition of the previous term.  So, \d* will find the '6', as well as "123456".

• How to avoid synchronization of the settings between two computers

  I have two computers (a desktop computer all-in-one DELL and HP laptop).  Log-in at once is my Microsoft account.

  PROBLEM: When I 'customize' screen on one, the same changes are made on the other.   It is not desirable.  How to avoid that, far from making a second Microsoft account?

  To clarify - the ICONS are not duplicated, just any changes made to the themes of office such as colors or backgrounds.

  Thanks in advance!

  Hello Beckinista,

  Thanks for posting your question on the Microsoft community.

  Thank you for your query details.

  I also like the fact you want to avoid synchronization of the settings between two computers.

  I suggest you stop the synchronization of all of the settings between two computers and check if it helps.

  Please see this link:
  Sync between multiple PCs with OneDrive settings
  http://Windows.Microsoft.com/en-us/Windows-8/sync-settings-PCs

  Note: Please see section "to stop all sync settings" in the article above.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Calculate the hours between two dates

  Hello
  
  I have a requirement to count the hours with 2 given timestamps, something like:

  SQL> select ((to_date('22-oct-2012 13:00:00','dd-mon-yyyy hh24:mi:ss') - to_date('20-oct-2012 13:00:00','dd-mon-yyyy hh24:mi:ss'))*24) B from dual ;
  
           B
  ----------
          48

  However, I wish it would be that simple. I just need to count the hours between two timestamps for the hours of work for example, 08:00 - 17:00, MONDAY to Friday (excluding weekends).
  So lets say I have to count the hours between two dates above the result should be 18 hours not 48 (4 hours on 20/oct, 9 hours on 21/oct to 5 hours 22/oct).
  How can I achieve this? Any idea will be useful.
  
  Thank you

  My query generates a list of all the hours between the start and end time, filters on the hours that are outside of the hours of work and then account for the remaining lines. Change that to partial hours must just be a case of replace the two occurrences of 1/24 with 24/01/60, then - as say you - Division COUNT (*) by 60.

  There may be performance issues using techniques of generation of line like this, if you put this in a query involving the joining of several lines of other tables (for example where the dates of beginning and end are derived from several employees?) or in several days. If you don't find it then count the number of whole days (taking weekends into account) between dates and work on the partial days after that it could be better. This would probably involve a lot of statements of case (which I don't have time to test it now).

  Ben

• Display the months between two dates

  Hello:
  I need all the months between two dates. I entered two dates as January 15, 2001 and 2011-mar-03. I want the result as below.
  
  JANUARY 15, 2011 - JANUARY 31, 2011
  February 1, 2011 - February 28, 2011
  MARCH 1, 2011 - MARCH 3, 2011
  
  I held this result of sql query in oracle. Could you please suggest me?
  Thanks in advance.
  Abhishek

  SELECT     GREATEST(st, ADD_MONTHS(TRUNC(st, 'MONTH'), (LEVEL - 1))) dt,
             LEAST(ed, LAST_DAY(ADD_MONTHS(TRUNC(st, 'MONTH'), (LEVEL - 1)))) ld
        FROM (SELECT DATE '2011-01-15' AS st, DATE '2011-03-03' AS ed
                FROM DUAL)
  CONNECT BY LEVEL <= MONTHS_BETWEEN(TRUNC(ed, 'MONTH'), TRUNC(st, 'MONTH')) + 1
    ORDER BY 1;
  
  DT                       LD
  ------------------------ ------------------------
  15.01.2011 00:00:00      31.01.2011 00:00:00
  01.02.2011 00:00:00      28.02.2011 00:00:00
  01.03.2011 00:00:00      03.03.2011 00:00:00
  

  HTH, Urs

• How to find the difference between two dates in the presentation layer

  Hi gurus,
  
  Hello to everyone. Today, I came with the new requirement.
  
  
  I need to know the difference between a date and the current date in the formula column application presentation layer.by.
  
  
  
  Thank you and best regards,
  Prates

  Hi Navin,

  TIMESTAMPDIFF function first determines the timestamp component that corresponds to the specified interval setting. For example, SQL_TSI_DAY corresponds to the day component and SQL_TSI_MONTH corresponds to the component "month".

  If you want to display the difference between two dates in days using SQL_TSI_DAY, unlike butterflies SQL_TSI_MONTH and so on...

  hope you understand...

  Award points and to close the debate, if your question is answered.

  See you soon,.
  Aravind

• Calculating the distance between two images... ?

  Hello

  I'm trying to calculate the distance between two images (A and F - there are other images between A and F), but I can't seem to understand how to make good sense.

  Image A.x is "(stage/2)-(A.width/2)" and the image of F.x is "provable - imgSpace" which is a negative value (all images x is a negative value for image A.x). "

  In my view, the calculation is F.x - A.x, and although it could be good I still ned the value to be non-negative.

  Does anyone know how to do this?

  Thanks in advanse...

  I think you can find out the distance with this equation,

  var len:Numer = Math.abs (A.x - F.x);

• Dynamic action - Get the difference between two dates + times

  I have problems a little dynamic to work action. I'm trying to get the time between two dates with the time difference.
  
  Here is what I got (this is apex 4.0):
  
  Two date pickers + two numbers fields (date/start/end times)
  
  I created a dynamic action on the page who fires on the point lose focus (above points).
  
  The real action for the DA is the body of the PL/SQL function:

  declare
    end_date DATE;
    start_date DATE;
  Begin
    start_date := to_char(:P1_START_DATE || ' ' || :P1_START_TIME, 'DD-MON-YYYY HH:MIAM');
    end_date := to_char(:P1_END_DATE || ' ' || :P1_END_TIME, 'DD-MON-YYYY HH:MIAM');
    :P1_HOURS := end_date-start_date;
  End;

  When I change the values on the page, I get the following error:
  
  AJAX call back Server error ORA-06502: PL/SQL: digital or value error: character number conversion error to set the value.
  
  I'm guessing that there is a problem with the date formatting, but I can't make it work. Thanks in advance!

  Hi djston,

  because you chose the dynamic action of 'Set value' with the "Body of the PL/SQL function" type you need to return the value. Try the following code

  declare
    end_date DATE;
    start_date DATE;
  Begin
    start_date := to_date(:P1_START_DATE || ' ' || :P1_START_TIME, 'DD-MM-YYYY HH:MIAM');
    end_date := to_date(:P1_END_DATE || ' ' || :P1_END_TIME, 'DD-MM-YYYY HH:MIAM');
    RETURN (end_date-start_date)*24;
  End;
  

  and P1_REQUESTED_HOURS like 'item affected. "

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

  Published by: Patrick Wolf on January 17, 2011 10:54

• Find the difference between two date and time

  Hi friends,
  
  I wanted to find the difference between two date and time, but my qury is slightest error "invalid number."
  
  

  select sql_step_num,proc_name,run_seqno,start_date,end_date,(to_char(start_date,'HH24-MI-SS') - to_char(end_date,'HH24-MI-SS') ) as ed  
  from eval.EVAL_RUNTIME_DETAILS
  where trunc(start_date) = trunc(sysdate) 
  order by sql_step_num;

  You try to get the feel between two char strings.
  And more difference between two dates gives a NUMBER of days.
  Try this:

  select sql_step_num,proc_name,run_seqno,start_date,end_date,numtodsinterval(end_date-start_date,'DAY') as ed
  from eval.EVAL_RUNTIME_DETAILS
  where trunc(start_date) = trunc(sysdate)
  order by sql_step_num;
  

• "Limited connection" when you configure the network between two computers XP.

  Original title: Configuration of the network connection

  Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

  Thanx Terry

  Old but good, networking tips from MVP Malke, MS:

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• OBIEE: Cannot do the subtraction between two columns

  I would like to see the difference between the expenses of the customer in the current from the previous period. Thus, each row contains data from a single client. And my first field (column A) lists the customer spending in the current field of the era and the second (column B) for the previous period. I tried to calculate the difference in my third field (column C).
  
  However, given that some of the cells in column A are "null", the respective cells in column C appeared also as "null".
  I tried to convert the column A 0 help ifnull null cells. But the respective cells in column C may not always do the subtraction.
  
  Help, please! Thanks in advance.

  Hello

  In the column C set Ifnull(Col A) - Ifnull(Col B) try this. I tried and it works for me.

• How to calculate the difference between two numbers in text fields

  Hello, I am fairly new to this, and I am certain that I will be bothered by the simple answer is

  I do a simple calculation... total of total assets - liabilities = net worth

  I have my total assets and my total work of the liability, but is not a subtraction option in the properties of a text field for the Net of a field value.

  I don't know... not any script Java can any who help out me?

  Thank you

  Judy

  You can use the option of simplified field notation, but first your input fields names must be changed so that they do not contain spaces or punctuation. For example:

  TotalAssets - TotalLiabilities

  If you want to use JavaScript, what will be needed if you ever in more complicated calculations, you can use something like the following as the custom fields (net value) calculation script:

  (function () {}

  Get the values of the field as numbers

  var v1 = + getField("total_assets").value;

  var v2 = + getField("total_liabilities").value;

  calculate the value of this field

  Event.Value = v1 - v2;

  })();

  There are no restrictions on domain names when using JavaScript.

• How can I use 2530 b and 4065 to measure the resistance between two selected pins?

  I want to be able to select 2 corners on a test with 2530 b set-up and measure the resistance between them with a 4065 DMM (PXI all). Ankles in question are each in blocks of 32 different poles, so I can match them in a double configuration 32 x 1 four or 64 x 1 if necessary. I can measure the resistance between several different pine sets as 0 on 33 pine pine, pin 0 at pin 34 pin 0 to 35 pin and pin 1 to 34 pin, pin 1 pin 36, etc.

  I understand how to measure resistance between a given pin and Earth using the the 2530 4065/b using the wizard OR-DMM/Switch Express, but it is unclear if I can measure the resistance between the two pins of selected by different user. I am a newbie of labview, used to write things in c#, so it may be something very trivial (I hope).

  Any ideas?

  Thank you

  -Russ

  Hey Russ,.

  I recommend starting with the following example (located in the Finder the example ('Help' to find examples):)
  "" Material input and output"Modular Instruments ' OR-Switch" niSwitch Dmm Switch Handshaking.vi

  Because you use a scan list, you can simply drag the two connections to the same entry and then the switch will wait for the two to settle before you send a trigger of the DMM... problem solved.  For example, to connect the CH1 to Com0 (DMM +) and CH93 to Com4 (DMM), then take a measure, then connect CH38 and CH120 to the DMM, you would use the entry list of scan to the following address:

  CH1-> com0 & ch93-> com4; CH38-> com0 & ch120-> com4;

  Note You can have as an entry in list of switch module scan.  In addition, you can only have a single advanced analysis and a measure full per switch module.